HeadRush PRIME - Amp Cloning and Sharing to the HeadRush Cloud

[@mesa290]

Players use to be so secretive about their tones, I am amazed at how many artist want to share amp rigs truly amazing

[@calebbenjamin6248]

This pedal is incredible. Thanks for the video

[@waynegram8907]

HEADRUSH FX, you should have had the Amp Cloning with also to save 3 channels per each CLONE so you can have different preamp gain levels and EQ settings to clone. I'm curious to see how well the cloning will do for fenders Hot Rod amps and Fenders Blue Deville amps because they have a nice tube breaking up sound which will be hard to clone.

[@HeadRushFX]

You could emulate multiple channels with different rigs/scenes

[@waynegram8907]

@@HeadRushFX not the SE as cloning different parameters settings on your amplifier and guitar pedals. The cloning right now is only one snapshot sample

[@izzyizborn]

Question: Rather than cloning an amp preamp only, would it be recommended to load down the amp, and to take a line out feed post power amp and pre-speakers? Thanks..

[@daveg4236]

Would you do this for clean and dirty channels so 2 clones?

[@AustinShaull]

This is incredible! Will the clones be usable in rigs for the standard Headrush PB/mx5 and other modelers?

[@HeadRushFX]

Clones are exclusive to PRIME

[@rod-abreu]

​ @HeadRush FX Any chance in this existance to get a editor for windows/mac to write effects on? Or atleast is it possible to get access to the SDK?

[@ronaldzik]

​@@HeadRushFX any chance that it will come available to others or is this technically not possible? Mooer has the cloning in the ge300, but the profiles/clones can be used in the ge200.

[@dangeroso121]

@@HeadRushFX Also CORE, correct?

[@DanielKraemerMusic]

If I export a rig, that uses an amp clone, will the clone be included in the rig or do I have to xpoert/import the clone separately?

[@Return2TheLiving]

It’s included

[@danc3746]

When cloning the preamp of a head only, with no cabinet involved, the waring says not to connect the powered speaker output into the mic input of the Headrush. What am I supposed to put in-between the 8ohm jack on the amp head to the mic input on the Headrush? A DI or LOAD box I am assuming? What's the difference?

[@jfo3000]

To get the signal of the preamp only you'd have to extract signal from the effects send, not the 8ohm out. This is just in general. You need to ask if the effects send can go into PRIME, but it seems that is what they are implying...per your verbiage above. You might want to contact tech support to remove any ambiguity before cooking any electronics.

[@danc3746]

@@jfo3000 Thanks, the LCD instructions warn you about the powered speaker output, but do not tell you what to do.

[@HugoMijangosMedina]

This is amazing!

[@richardmiller191]

Great video thanks for posting! Is there any difference on the method if you use the Headrush core?

[@Return2TheLiving]

They are identical in this sense

[@metatron333ascension]

what volume level should the amp be to clone? im guessing if you have it on 0 it wont do anything because no tone going through the amp. but probably dont want to be on 10 either. so what is optimal level on the amp when cloning?

[@HeadRushFX]

The input level going into Prime should be -6dB, but the level of your source (amp) depends on what amp you're using and what kind of tone you want. Cloning captures the exact tonal properties coming out of your amp. Basically, whatever level YOU think your amp sounds good at is the level you should be cloning at. If you have a tube amp that needs to be CRANKED, then crank it!

[@metatron333ascension]

@@HeadRushFX oh i see. so there is more to it than just hooking up a mic and getting it optimal at -6db. i never knew that. ive never tried to clone an amp before.

[@mac63corvette]

During cloning my Amp was so loud. How do I avoid this. Volume was only on two.

[@benboutin6642]

will cloud cloned precepts/ amp be available for other headrush products like gigboard or MX5?

[@cpeplinski]

My first question as well. I am thinking of getting a Prime and I gig in other towns using another guy's pedalboard. I would love to clone my home amp and then have that all on his HR for traveling.

[@HeadRushFX]

Cloning and using clones is exclusive to Prime.

[@benboutin6642]

it's really a pity.... I Hope you will not give up your old products...

[@metatron333ascension]

@@HeadRushFX there isnt going to be a prime version of MX5 or Gigboard??

[@HeadRushFX]

@@metatron333ascension nothing to announce at this time 😎

[@JordanStLee]

What's the best microphone to use for cloning Amp&Cab? Dynamic or Condenser?

[@bciecko1]

I wish someone would address this. I keep asking all over and am not getting anything. 2 months plus and you get no response. What about placement too, you know. We aren't recording sounds, just responses to the circuit and the response the speaker makes to the frequencies.

[@Return2TheLiving]

These are all preference based things as they will affect the outcome, same with mic placement and distance.

[@jbmock4207]

I was just thinking about trying something else, I have a gigboard and pedalboard... The effects are great but the amps are lacking

[@HeadRushFX]

Check out our preset video. It should give you an idea of how the amp models sound. There's a lot of new stuff in there, plus CLONING! kzbin.info/www/bejne/oni8aqFobJuIiKM

[@randomsubscriber100]

I really wish the guy took a couple seconds to explain little things like “latching” “polarity” n things like that

[@matforsbon]

Strange! "KÄFTEN" is a Swedish slang word for Munnen, which means "Mouth" in English

[@Sixfootdig]

Does anybody have any bass amps that they've cloned?

[@rod-abreu]

Freak, really, another device??? That's why no good improvements have been coming out to the Headrush Pedalboard.

[@jazzmathias]

Or fix their looperboard that’s even can’t get the syncing right, good job headrush! lmao

[@rod-abreu]

​@@jazzmathias Yeah, right? I've been (together with many other users) requesting them some sort of control software as well, so that we could make changes in the software and then upload it to the board, or at least if they could open up their SDK so we could create our own stuff... but just nothing. Freaking capitalism.

[@michaelvarney.]

-6db with guitar volume dimed? No one seems to be clear on this.

[@JohnvanCapel]

The -6db is a ballpark figure - if you have a very low-output guitar, you'll probably want to dime it, but the average guitar you can just set it to "whatever tends to sound nice to you". The HeadRush sends some test signals through at basically all volumes a guitar can achieve on its own, and it can work around the mic input as long as it's not peaking or bottoming out. The amplifier's volume should also be on however you like it, as long as you set the parameter in the HeadRush to be the same.

[@014bhap]

-6 is the max imput volume from the amp or pedal. I would have the guitar volume all the way up. Otherwise the input will be too hot. You are looking for -6db Max Headroom. (remember him?)

[@Jowls2024]

What?