Tire fitting is now useless! Just 1 JACK 🔥 Change a wheel in a minute!

[@MichaelDouglas-nt7ti]

Most people will try this and end up taking the tire to a shop to finish the job 😂

[@Slipshott]

Hardest part is the part he didn't do......he never actually took the tire off the rim.

[@rgfisher21]

And it still had to be balanced

[@username8171]

That's not the hard part, it's breaking the bead that's hardest, that's why I use my log splitter. Removing a tire is easy, as long as you get the bead into the drop center opposite of you, then it all works out fine.

[@leslieedgardlindop7202]

Hi easy way l have done this in the bush is to use your car to run over the tyre and brake the bead and use tyre levers to change the tyre .cheers les from Adelaide south Australia

[@Crushwokery]

Hardest pert is watching this bull💩. Only reason I watched it was hoping for something clever I've not see in 30 years as an hgv truck mechanic. Sadly I was wrong.

[@DanielMcCollough-u3r]

Hardest part is listening to the narrated voice😂😂😂

[@dontrend5956]

using a file as a pry bar is a very bad idea.

[@DogSt]

Using your mom's bran new scissors to deflate it is also a bad idea 😂

[@andrewreid2228]

I thought that too.

[@fjyamaha-fc7cm]

😂

[@БорисЖемчужный]

Все эти варианты были актуальны и ими пользовались в далёкие времена, когда не было шиномонтажных мастерских на каждом километре. Ничего нового в этом нет. У всех были в багажнике монтажки и запасные камеры в дорогу. Не было безкамерных колёс.

[@mkrp4]

На дисках не было кольцевого выступа внутри для бесканмерных шин, шины были выше и уже в поперечном сечении; после такого "монтажа" с помощью напильника диск можно будет выбросить из-за ржавчины

[@valeritchkalov3547]

Ну, уметь-то надо всё равно, мало-ли какие приключения приключатся. Вот накачать смонтированную бескамерку на дороге, не имея компрессора- это квест еще тот! Было и такое в лихие 90-е

[@Чебуратор_Ватникович]

@@valeritchkalov3547 зачем бортировать колесо в дороге , если существуют жгуты для проколов ?

[@sokolodi]

Полдня ковырять отверткой....дай 2 доллара на шиномонтажке! Мастера за 2 минуты сделают!

[@valeritchkalov3547]

@@mkrp4 ну вообще, без этого кольцевого выступа ("хамп" он называется) риск есть, что при ударе покрышка "схлопнется", но я ездил и на обычных дисках, и даже "tube type" покрышки без камер ставил, ничо не схлопнулось

[@johnpaserba2299]

Some put a little yellow Arrow on the rim and also on the tire. The arrows point at each other. That way when you take the tire off to patch it, you can put it back on exactly where it used to be, and will not need a new wheel balance

[@tonyteel]

Just put a mark on the tire where your valve stem is

[@Minimumpilot]

Wo kann man eine Reifenfeile kaufen?

[@TheSnoopindaweb]

💬> It never takes that much longer to verify and then decide if any weights need installed - correctly 🤠 Yup❗ G~G.

[@MsGem222]

Если прокол заделывается, или ставится камера, то балансировка колеса нарушается.

[@johnbreen3043]

My father taught me how to change tires years ago when I was a kid with a bumper jack and tire irons. Where I am tire shops and garages charge $30.00 USD to change one tire. I bought a tire changer for $50.00 USD at Harbor Freight Tools and I have saved several hundred dollars doing them myself and I have done some for friends and made some money. I didn't ask them for money. They were happy they were done cheaper. I have a balancer as well.

[@TheSnoopindaweb]

💬> 👌 Stubborn is good 🤠 Yup❗ G~G.

[@mike7gerald]

Balancing the tire is essential-it's no use changing it if you don't balance it afterward. How expensive was the balancer?

[@johnbreen3043]

@mike7gerald $50.00 at Harbor Freight and it works fine. You wear off enough after a few miles anyway that somewhat makes it not matter anymore. I changed plenty of tires over the years and never balanced them and hadn't had a problem.

[@deanyanko3326]

I'll tell you one thing breaking the bead on foreign rider mower rims with small pry bars bends the metal thus rim leaks no fun.

[@doradean3097]

I read somewhere the tire balancer usually goes near where the Schrader valve is located, is that true, anyone?

[@charlesleonragain]

lubricate tire bead and it will work a whole lot easier

[@thisisnumber0]

I missed the bit where the tyre came off the wheel and the bit where the new tyre went on.

[@markpaquette9631]

That and the part where you inflate the tire with the jack lol

[@paulhillman400]

The tyre centre wouldn't let him video that part.

[@tamassollei4473]

Mert ez egy Dewalt akkus fúrógép bemutató videó

[@wackingjack]

This video is missing so much it's a joke!

[@RikaPearson]

That's the easy part. Breaking the bead is the hard part.

[@JK-zl7vv]

While you had the jack pushing the lip of the tire into the center ring of the tire, would be the time to pop the bead of the tire over the rim across from the jack, then the tire would come right off. 😎👍

[@ЗахарЗахарович-р2к]

Есть ещё вариант: поддомкрачиваем автомобиль и снимаем колесо с автомобиля, затем кладем колесо под диск или барабан снятого колеса и приспускаем домкрат, авто свом весом разбортирует колесо. Или положить на шину доску и наехать колесом, тоже помогает.

[@ruslankeller386]

Пробовал эти 2 способа - не помогло.

[@ИгорьНиконоров-ж8п]

В 80х годах в основном так и разбирал.

[@doktorbotving]

А балансировать поедем в шиномонтаж?

[@ИгорьНиконоров-ж8п]

@@doktorbotving в 80годах мы и балансировали сами, правда редко, когда совсем хреновое колесо, да и на большинстве тех дорог балансировка была бесполезна.

[@ЗахарЗахарович-р2к]

@doktorbotving Колесо "бить" начнет поедим, а так что зря время тратить. Грязь и снег налипает, камешек в протектор попадет ездим же как-то.

[@fulviobertotti6785]

Ne ho cambiati tanti di pneumatici ma non avevo mai visto quel sistema. Se ti trovi nel deserto è ideale. Complimenti.

[@arnoldalt2571]

would you have an air compressor with you in the dessert?

[@alanm8932]

​@@arnoldalt2571I've changed a tyre myself & got it pumped up with just a foot pump, so it is possible. I usually pop it onto the rims by lighting carb cleaner but the last time I managed it with just the foot pump. I always carry the foot pump in the car, so I'll be ready for that tyre change in the desert!

[@keneaton2855]

The only person in the world that is not completely irritated by constant background music is the person making the music.

[@JohannesC-c9k]

Yes it annoys me to and video makers rotate their hands holding components and tools, we can see what they are instantly most of the time. Low self awareness is the cause.

[@drueatcer]

I must’ve had my sound off, did not hear any background music.

[@depmode9472]

Would have been a ton better without the annoying music … maybe just a voice step by step or even just a mime version 😃

[@juntjoonunya9216]

He's irritated by it too

[@groblerful]

That file you use as a tire lever is likely to snap

[@tonyteel]

yes , files are too expensive to pry with

[@markwarnberg9504]

Crowbar!

[@michaelhemric5228]

They are pretty brittle as well when you put force on them like that

[@WilliamMarble-q1b]

@@michaelhemric5228 Listen to these guys!

[@kawo1540]

need to know what metal made

[@MrMickeycase]

Thank you. It took for decades to know the simple way as you taught

[@FixItFast1]

Is that sarcasm or did you really like it?

[@lotossacramento]

Всё гениальное - просто 🤙

[@kws1957]

I change my tires too alone but with a different method, but the shown technique here seems to be simpler.❤❤❤

[@jeffreystutzman]

That is outstanding, noteworthy and awesome. I hope it works like that on bigger aluminum rims and I will be trying it because I have to change a tire in the next few days that has a sidewall leak. Breaking the bead is the hardest part of it all. Getting the tire off the rim and putting it back on is easy and using dish soap makes it a breeze for slipping the tire off and on the rim.

[@FixItFast1]

Hello, dear viewer! It's great that you shared your opinion - I will definitely wait for your SMS, did you manage to do this trick - write to me🤩

[@alexeyb91]

Я так лет 40 назад делал, когда не было шиномонтажных мастерских. А теперь это дикость какая то.

[@JarKarracos]

Это брат происходит у них,у тех кто считает себя самыми лучшими в мире...21 век,он тут показывает,что мы раньше при помощи двух монтерововок делали😂

[@MsGem222]

Смотри выше - чел отписал, что у них ремонт колеса стоит 30 долларов, а шиномонтажный станок в их Леруа - 50. За такие деньги я бы и себе такой станок прикупил. 😉

[@РомуальдАльгедрасович-ш7и]

Я живу в краю рукожопов и криворуков, на одной шиномонтаже порвали новую резину, на другой -спускает по диску два колеса( не проверили после сборки ) Так что буду сам делать раз в год - надëжнее будет, да и нервы! ☝😃

[@EvgenMay]

@@РомуальдАльгедрасович-ш7и все мы живем в таком краю. Так что приходистя много самому делать, но шиномонтажа еще не дошел.)))

[@timbarnett3898]

This is how my dad taught me too change tire from rim some 60 years ago! Thanks for sharing!

[@francstrucl4506]

Ne verjamem prvič videno kaj takšnega zakaj niste objavili

[@Владимир-ф7щ6п]

Классно.. Быстро и не дорого. Спасибо. Попробую этот приём. Из России. Сибирь.

[@en_der7057]

Wow! Kiedy przylożyłem czerwony sznurek do oponu, ona sama spadła z felgi... to najszybsza wymiana opny w moim życiu... dziękuję.

[@helmutsandner4823]

Sehr gute Idee, wenn man nichts anderes zur Verfügung hat 👌😎 Aber wenn man mit einer Feile arbeitet, ist etwas Vorsicht geboten, zumindest dann, wenn man kein Gefühl hat und nur Kraft ... 💪💪💪🥳😂😂😂Aber Alles in Allem 👍🎖

[@AlanAlan-sz5zd]

Hardest way i ever seen to change a tire, and I have changed a lot of them by hand

[@nedcramdon1306]

Ya, that was almost excruciating.

[@jigc23]

Upload a video

[@rudyflores9395]

show it

[@ronwilliamgeraldarnott57]

Put some dish soap on and it will help lots 😂😂

[@patrickvanbramer5037]

You only need a jack... and latex gloves, scissors, A Strong rope, screwdriver, lighter, drill with hook thing (optional) funky music and pure Magic before your eyes. This absolutely was the best pass time. Thankyou

[@jerrylboutin]

Been doing this for along time but you need to start it like he did but when the gap shows pour dish soap in bead than run your jack all the way than hit the bead with a bar and hammer it will pot quick

[@Paramecio_Z]

Excelente tutorial. Muchas gracias. Saludos desde España.

[@MTB_MICK]

Nice trick to break the bead. I use a different method for fitting though. A heavy duty ratchet strap around the circumference of the tire, tighten then inflate with a compressor. 👍

[@ericracine6305]

In one minute the title say and the video last 7 minutes 🤣😅😂

[@shawnpink8857]

And he only took the tire off.......

[@truhunk1]

Mission accomplished. I like saving money, but some things just aren't worth the trouble. I'll let the tire shop do it.

[@ruslankeller386]

Огромное спасибо!! Крепкого здоровья тебе!

[@jean-pierrecane4349]

Bonjour, Avec un peu de savon pour faciliter le glissement pour sortir, comme pour rentrer le pneu ! Merci pour votre partage.😊

[@FixItFast1]

Bonjour, cher spectateur ! Je suis très heureux que vous ayez laissé un commentaire ! Merci, vous avez fait valoir un bon point ! Je prendrai certainement en compte vos conseils !🤩

[@jean-pierrecane4349]

@@FixItFast1 Merci beaucoup pour votre attention. Bien à vous

[@LARSDIAGAUTO]

Thank you for this vidéo 😉

[@JerzyAftyka]

Gratuluję pomysłu hej

[@DailyTipsFix]

I will give it a try.

[@CreatorTips.007]

"Such an ingenious technique! Changing a tire in just a minute with this method is absolutely brilliant!"

[@peterpeter377]

Stupide idiots😂😂😂😂

[@TrinitaMatoumona-hq2dv]

En une minute? J'ai compté plus de 7 minutes dans cette vidéo!

[@endurofan9854]

sarcasm. at its finest 🤣🤣🤣

[@davidpalmer9740]

How do you balance it?

[@kenbellchambers4577]

I rectangle of wood such as a scrap of 20mm plywood or similar piece of tough wood might prevent the feet of the jack from damaging the tire. This idea of using the force of a jack could be handy for other jobs.

[@БорисРамазанов-у5е]

Пока разблокировал, диск поменял цвет😂

[@K_o_l_a_121]

Да ещё и отвёртку поменял на без ручки.

[@AlekseiGorcheninN78]

Молодец!

[@michaelperez277]

Une intelligence de génie 👍💪😉

[@omarfongvillarreal1721]

VERY GOOD INGENUITY, FRIEND, TO GET OUT OF A TROUBLE. GREETINGS

[@umac01]

I Have never seen this done before and now I have thanks to KZbin witnessed it done twice. There are many more demonstrations how to do this keep them comming.

[@логик-ц3ю]

Умница 🎉🎉

[@joeclark7888]

Great ideas,great work!We almost always have everything we need to do any job if we just take the time to think. Invest in some tire irons. Never pry with a file!

[@NasaInventions20]

Wow, this looks so quick and easy! Who needs a tire shop when you have this trick?

[@28704joe]

People who's only tool they have ever used is a fork.

[@a___________r414]

It is more or less a joke ... it never will work in any way perfect! A lot of such videos ... show it only for small tires and steel rims ... and even these conditions will hardly work!!!

[@guillaumedurand1342]

thanks you for the tips ! : )))

[@michelebreese5940]

Yep. Many times. I do it for the musel power

[@naeemahmad4067]

Don’t kill your self and look after your back . Health is everything, money is not everything

[@geoffreycurtis1307]

A minute ? Check the length of the video and actually it’s a very clumbsy way in my opinion

[@GordonMilliord]

Do you have a better way? I'm waiting.

[@Guvament_bs]

​@GordonMilliord to break the bead I used to put the wheel under the car and jack up using the cars weight rather than the rope. If you have a flat tire you must have a car.

[@ГеннадийЦиклаури]

Дурью мается.

[@robbynv9900]

Put the tire between your ass cheeks and fart.😂

[@juvillace22]

Good idea 😮

[@mehmetarslan2619]

emeğe saygılar güzel fikir

[@Игорь-е4ч5м]

Я всё ждал, когда же он разожжёт костер и начнёт танец с бубном вокруг него!

[@SmokingPatBlueSky-hy4pl]

😂❤😂🎉😅😊

[@sidjames5827]

Somebody please get this man a valve stem remover

[@a___________r414]

no ... that's the advance notice - in the next video the tire change will only be done with scissors!

[@lisiatepalu7737]

Thankyou for your sharing information Thankyou

[@BackUp-z4t]

Well done.

[@diversity2739]

Thanks

[@Aleksey-Nosko]

Так бескамерные покрышки превращают в камерные👍

[@ВалерийЯкушин-ъ3й]

Молодец! Здорово!

[@dinganejacob1878]

Wow 👌 👏 😍

[@FixItFast1]

🔥💪 Yessss

[@edwardmiller5754]

Very very smart choice

[@sircaptainchaos2388]

You made hard work of that

[@jacquinetmarc2990]

Super genial

[@VE3UET]

2 different wheels used is this show, but very good Ideas, I suprise the guy didn't take advantage of the centre of the rim to remove and install the tire

[@FixItFast1]

Yes, my friend, you are very attentive! Everything is as you said, but everything is done at home

[@davidbertrand6884]

After jacking the tire away from the rim, those cracks in the tire 🛞 means it’s tine for NEWTires

[@tasoslogo1799]

BRAVO

[@FixItFast1]

🤗🤗🤗🤗❤️

[@neilgroves534]

Used to do this back in the 80s WITHOUT gloves!

[@Daniel_Antonio_Arellano782]

As a young man I removed some tires. The use of the jack was different though. I would use what we called a Handyman jack. That was the brand. It stood upright. I would put the edge of the jack against the edge of the wheel. Using basically the same principle as this one. But using it on both sides of the tire. Then removing it. It is easier to remove if you do both sides.

[@tonyteel]

Always nice till it slipped and got a whack on the shin

[@Daniel_Antonio_Arellano782]

@tonyteel True. It probably could have happened. But never did.

[@JesusReidosReis-7]

Parabéns!você ganhou + um inscrito .

[@INTERNA9]

Thanx

[@НиколайИванов-с8ъ]

Посмотрев как специалист завязал "бабий" узел на верёвке , понял бессмысленность дальнейшего видео....

[@alanm8932]

Such a shame you didn't watch for another 30 seconds... I will certainly be trying his method. (Obviously with a _man's_ knot). You also missed him using a file as a tyre lever, which I'm sure would amuse you!

[@user-fk6ku3hy5f]

​@@alanm8932 Как жаль что ты не живёшь рядом 😂 , я бы тебе показал как разбортировать колесо обычной лопатой. Это занимает пол минуты времени, безЕбли верёвками😂. Или обычным металлическим уголком и кувалдой бортируется грузовые колёса..

[@modrisadijans383]

@@user-fk6ku3hy5f Да просто киркой и ломом отжать . Видео англичанина умом не блестит.

[@olegkusmin9720]

Без проблем сами делали. Ничего нового

[@garryhegarty8889]

My son just users a medium bench vice ,and it works both do ,,.

[@FixItFast1]

How is that? Is it easy for him? I would like to see

[@МаксимРозов-ш8ъ]

Молодец креатив

[@johnzdrazil2140]

Wicked Cool!!

[@ELIJAH-BLAIN]

Brilliant!

[@miodragmarkovic3304]

Bravo

[@JohnSmith-un9jm]

Forget it; I don't have a lighter

[@allangray6320]

Or scissors

[@HiepFix]

Bạn làm rất tốt

[@squarewheel142]

We used to use a bumper jack to break the tire bead to remove tires about 45 years ago when I was more broke than I am now, LOL.

[@sabyrbekishov9899]

Молодец.

[@musicD.A.]

Now after remove how you put the new tire on ???

[@neilscarlett3416]

This trick is perfect for DIY enthusiasts or those looking to change tyres faster than an F1 team

[@FixItFast1]

This is really true, my friend! Thanks for your comment! Tell me if you managed to repeat this trick!🤗

[@g.heidariheidari5558]

چیزی خوبی بود تشکر ❤

[@nash1201]

Молодец!!! I'll take note!

[@user-cv2bh4gj6h]

You do not need a jack to break the seal just stand on the tyre and then use the cord to pull the off of the rim much quicker a tyre fitter showed me this trick way back in the 80s

[@jamesdewiel4736]

Mom’s been looking for those scissors all day

[@christiancoste2575]

I like it.

[@سجادبلوچ-ن2ض]

احسنت‌خیلی‌خیلی‌تشکر‌❤❤❤

[@kamaljitsinghattalia]

Fantastic too GOOD BRAIN WORK FANTASTIC FANTASTIC FANTASTIC TOO GOOD THANK YOU VERY MUCH MUCH FOR THE TEACHING

[@FixItFast1]

Madly praaaad for your such laudatory comment! Thank you friend! hugged

[@05577]

Если шине 15 лет, то она так прикипает к диску, что на шиномонтажке снимают долго. На видео новая и мягкая шина, а с грубой помучаешься.

[@Gary-G31]

3307 - как бы не совсем новая :)

[@АлексейБудихин]

​@@Gary-G31как бы судя по остатку протектора - не совсем старая😂😂😂

[@Владимр-е6л]

Если у меня... За пять шесть лет колесо прокалываю.. Оно так закипит........ Никакими донкраиами...только ведешкой отмачивал и кувалдой....

[@brucerobson8767]

Never use a file as a lever! It is brittle and will snap, possibly causing serious injury.

[@mkrp4]

@@brucerobson8767 The entire video is BS; this tire had been removed before the video

[@garyvanremortel5218]

It applies force.

[@martinrios4264]

Muy buen tic hay k hacerlo

[@ebrahimyousefi5712]

عالی بود ❤❤

[@lodreipeina13]

Chłopie! Co ty wyprawiasz? Odpuść. Pilnikiem po feldze? Nawet po wódce bym tego nie wymyślił. 🤣

[@JoaoLouzan]

a o cara é bom mesmokkk

[@annsmith8000]

Nothing like the famous New York minute.

[@PabloCosta-xu3my]

Que bueno amigo

[@ФаустФауст]

Лежу смотрю и думаю ,как над собой поиздеватся

[@jorgedeltaxmorales9392]

Muy bueno, gracias

[@mattc6226]

It works but if you pinch the tread part too much you can get an air bubble and the tire can blow while driving.

[@HeidiLamb-i4y]

Good example of how to make a file a multi use tool. Kind of like chisels. They make excellent screw drivers. Right?