Heavy Duty 17" Guillotine Paper Cutter- Fix Incomplete Cuts and Realign Blade- Detailed

[@thekre8ivspace92]

So glad I found your channel- I’ve only recently purchased one of these cutters and I wondered why it wasn’t cutting all the way through and how on earth I was going to fix it- thank you so much for the comprehensive explanation and demonstration.

[@MommyShareSpace]

I am glad the videos were helpful 🙏🏾 and I hope you get your cutter up and running soon. Thank you for watching!

[@joannmitchell6331]

I watched another of your videos and found the information I needed. Thank you so much I have been looking for days. You definitely covered everything. Fantastic videos

[@MommyShareSpace]

Yay, I was about to respond to your last comment. I am glad the videos were helpful. Thank you for watching!

[@teacherstephsolis8491]

OMG!! I'm about to cry from excitement, I really needed this video. THANK YOU!! I am sure that is what my cuter is missing. I will try later today and see if it works.

[@MommyShareSpace]

😊 You're welcome!! I hope it helps. And good luck!

[@Elinasm]

I was searching for this video for so long. Amazing content! Thank you! ❤

[@MommyShareSpace]

Hi, glad it was helpful. :) Thanks for watching! ❤️

[@sewkraftysanaa]

OMGGG you are so amazing You have a new subbed here. Thank you so much I can't wait to see what other videos you have

[@MommyShareSpace]

Oh, I am happy the video was helpful:) Thanks for watching and subbing!

[@skywuzhereyesturday]

My guilotine is cutting at a weird downward angle, like its not square! Like when i stand a book up, the "top" of the cut will be 3-4mm taller than the bottim of the cut. Do you know what bolts might fix this? I cant find a tutorial on how to adjust it anywhere

[@MommyShareSpace]

Hi. This is such a late response, but now found time to do more research into this issue. Since It's one, I have experienced also. Not sure this would still be useful to you, but I shared a recent video on KZbin talking more about that angled Cut. To your specific question about if there is a bolt to re-adjust that blade, I reopened it, and I have seen no way to do this. I addressed this in the video and spoke more about why I believe the blade cuts the way it does. This is the video here if interested---> kzbin.info/www/bejne/q5S2aJl3rZKNotU Thanks for watching the above video and commenting!

[@granjmy]

@@MommyShareSpace Another great video to solve our problems. Ma'am if you are not a distributor for this manufacturer, you really should be!

[@MommyShareSpace]

@@granjmy Thank you ☺

[@sewkraftysanaa]

The piece that holds the papers down in place is higher on on send. Should it be like that that is causing my papers to move when cutting and its not cutting even

[@MommyShareSpace]

Hi, in this video ---> kzbin.info/www/bejne/j3qpiJ9tnaupaNU, I showed how to adjust the fence that holds the paper down if it is uneven. However, in this video ----> kzbin.info/www/bejne/q5S2aJl3rZKNotU, I was sharing what I understood and tips I was implementing to try and improve the cuts I was getting with my cutter. Someone shared something they did that straightened the blade's angle by tightening a bolt. I intend to try it out for myself soon once I can get our new school year going. Hopefully, it may be helpful to you:) Thank you for watching!

[@kumbharevv]

Please show how to change spring inside as the cutting rod will work easily.

[@timothyoconnor7793]

Thank you so much. Your videos are great.

[@MommyShareSpace]

You're welcome 🙂. I am glad it was helpful. Thank you for watching!

[@jacktoddy9783]

A very useful video - thanks for making it - appreciated.

[@MommyShareSpace]

Glad it was helpful! Thanks for watching.

[@granjmy]

First, new subscriber because of your EXCELLENT videos for this machine! I had decided not to buy this because of Amazon negative reviews, but you have set my mind at ease. May I ask if you have an affiliate link for the 12" model? If not, please ass one so I can buy from your link when I decide to purchase it. Thank you so much!

[@MommyShareSpace]

Hi, thank you for your kind comment, subscribing, and watching the video! I am glad it was helpful. The direct affiliate link for the A4 12'' model is ---> amzn.to/3PwaAPD . To be transparent, my affiliate link for the model I have, attached above, works on any purchase made within 24 hours of going to Amazon using that link. Even if it is a different product, like the 12'' model :) The more I used the machine I discovered new things. In my last video, I shared that even though the machine cuts excellently, the larger the book or stack of papers, the harder it might be to get a perfect 90-degree cut. And the degree to which it is off depends on how big the project one is cutting into is. Recutting can help when cutting books, and working with smaller cuts at a time, like 1/2 inch and below, can give an almost perfect 90-degree angled cut. Perfection is not imperative in my use case scenario, but sharing in case it would be helpful if you haven't seen that video.

[@granjmy]

@@MommyShareSpace Thank you for the link! Yes, I watched that video. In a different video from a lady who makes books, she suggests two things to help with achieving straight cuts. 1- Do not tighten the hold down clamp too much, because that could pull the stack out of alignment. 2- Using thin double sided tape, attach 220 grit sandpaper strips. One to the bottom plate where the stack sits, and one to the underside of the clamp down. This helps prevent the stack from shifting under clamping and cutting pressure. I can find that video for you, if you would like..

[@MommyShareSpace]

You're welcome! Oh, that's great. Yes, I would like to see the video :) I want to try an angled block there, as someone suggested, so it would be great to see other options.

[@etech1951]

Obrigado, salvou o dia

[@MommyShareSpace]

Estou feliz que tenha ajudado; obrigado pelo seu comentário e por assistir o vídeo!

[@etech1951]

@@MommyShareSpace Eu me inscrevi. Só sufuco, tava com trabalho atrasado, seu vídeo salvou.

[@muhammadnaeem9639]

I have issue in cutting the paper, how i would be able to send u video? Could u help me plz

[@MommyShareSpace]

Hi. Do you have a KZbin channel? If you link a video, I can check it out there.

[@elimomo78]

Excelente video, seria bueno que este en español para poder entender mejor. Gracias

[@MommyShareSpace]

Me alegra que haya ayudado. Tendré que buscar subtítulos en el futuro. ¡Gracias por ver!

[@farisfaris7115]

thanks a lot

[@MommyShareSpace]

You’re welcome 🙂 Thanks for watching the video.

[@ArnaPrints]

when i tried it my knife won straighten it gave meback pain😢

[@MommyShareSpace]

Sorry to hear that.

[@ArnaPrints]

im here to watch it again and again ❤​@@MommyShareSpace

[@MommyShareSpace]

@@ArnaPrints I hope you’re able to get your machine up and running soon, if you haven’t already. 💙

[@Patricia-fe2sz]

Se puede ver con subtítulos en español? Por favor

[@MommyShareSpace]

Hola patricia, No sé si esto todavía te será útil, pero ahora estoy empezando a responder después de prepararme para un nuevo año escolar. Este breve video que hice---> kzbin.info/www/bejne/j5jXh3yCnc6pmas muestra cómo cambiar los subtítulos a cualquier idioma, ya sea desde una PC o celular. Espero que ayude. ¡Gracias por ver!

[@Patricia-fe2sz]

a por responder@@MommyShareSpace

[@kumbharevv]

Please translate in Hindi language.

[@MommyShareSpace]

Hi, have been going through videos and reply to messages that never came to KZbin studio. Apologies for the late response. This is how you can turn on the subtitles in any language. kzbin.info/www/bejne/j5jXh3yCnc6pmas