Heavy Duty 17'' Guillotine Paper Cutter Re-Alignment of Blade and Fence| Stick Rotation| Maintenance

[@MommyShareSpace]

Hello, and thanks for watching!❤ If your cutter is only partially cutting through at the top end of the blade, you can check out this follow-up video I made. (This is the link kzbin.info/www/bejne/aXjYd5WNn5dmg7s) where I found out what is causing it:) At 6:14 in that video, that will solve that issue at the top end of the cutter.

[@davidlodhar4856]

Wish I could like this video more than once. I just repaired and adjusted my guillotine and its all thanks to you. Triple 👍 👍👍

[@MommyShareSpace]

You're welcome!! Glad it helped. I also appreciate your comment. That would help others looking to use the video. Thanks for watching :)

[@ShelfSafari]

Thank you so much. Very well explained. Straight to point video. Loved the timestamps.

[@MommyShareSpace]

Thank you. Glad the timestamps helped. 🙂

[@joeh773]

Excellent video, I am impressed. Thank you very much for sharing and the effort you took to do so. Awesome job!

[@MommyShareSpace]

Thank you for your kind comment and for watching the video.🙂 Hope it was helpful.

[@paulafitch7527]

THANK YOU THANK YOU. THIS SOLVE MY PROBLEM. IT WAS THE FENCE!!! EASY FIX

[@MommyShareSpace]

😊 Glad it was helpful. Thanks for watching!

[@jackblair5776]

Thank you, thank you, thank you! This is exactly what I was looking for. You really explain things well. I have been afraid of adjusting the cutter since I got it (there are so many bolts), but you have empowered me. I will be trying them soon. Thanks again!

[@MommyShareSpace]

Hi, you're welcome! I am glad it helped and hope you're able to make the adjustments you need:) After making this video, I also made another video adjusting the cutter. It includes all the above information and how to place leverage under the handle. It may be needed sometimes to get the blade leveled when replacing one of the bolts. I learned that later, so that was not in the above video. If you're interested, this is the link here ---> kzbin.info/www/bejne/aXjYd5WNn5dmg7s . Thanks for watching!

[@teacherstephsolis8491]

Hi there!! You have saved my life! I have tried looking for more explained videos but never found them. I just have a couple of questions, my cutter does not have the 2mm up at the end, it is just flat and I don't know what to do to fix that. And, my second question is what if my blade started to cut less at the beginning than at the end, do you happen to know how to fix it? Thanks so much for the help again.

[@MommyShareSpace]

Hi Teacher Steph Solis. First, I am happy you found the video helpful:) Sorry you're having issues with your machine. Based on your description, your blade seems aligned in reverse, cutting into the stick more at the end and less at the top, possibly with a 2 mm or close to spacing existing at the top end of the blade. Does it look this way? This spacing would account for it cutting less at the beginning than at the end. At least, it sounds that way:) I believe you should be able to adjust the blade by a series of adjusting and readjusting that vertical screw I showed in the video and the small top bolt. However, in the video, at 8:05, where I showed the extreme case of misalignment, I mentioned how sometimes loosening the middle bolt might be required if the realignment is way off. But from my experience, I would only try that after trying the first option. If the space at the top end of the blade is not that great, I believe the first option should solve the issue. After using the machine for a while, I suspect realigning the device will not be a one-time thing because of the moving parts. I am not sure if that explanation makes sense to help in the meantime. I can try to see if I can recreate a similar situation with my machine and try to realign it within the next week or two. If I can't, I'll comment here. Thanks for watching!

[@teacherstephsolis8491]

The space does not exist at the beginning nor at the end. It does not have the inclination but some how it does not cut at the beginning 😞 I hope it makes sense. I'm gonna try and see adjusting it as you mentioned, thanks a lot for the help❤️ I'll stay tuned for that video.

[@MommyShareSpace]

Ok. Then I believe adjusting that screw and bolt would fix it. Try to align it where the top end cuts into the stick just a bit and the bottom end has a small spacing. That should solve the not cutting at the top. That is how my machine is aligned:) I hope you can get it fixed ❤️

[@MommyShareSpace]

@@teacherstephsolis8491 Hi, If you're still getting incomplete cuts with your paper cutter, I made another video (this is the link kzbin.info/www/bejne/aXjYd5WNn5dmg7s) where I found out (I think) what is causing it:) At 6:14 in that video, this might solve that issue at the top end of the cutter. 😊

[@teacherstephsolis8491]

@@MommyShareSpace I already did🤭 and I'm really thankful ❤️ again I love your videos, they are super useful and nobody has these kinds of videos. Blessings from Costa Rica 🙌🏼✨

[@christianakwesiamoafominis2203]

Thanks for the video it's great. Please after realigninng my blade it can only cut a halfway through. I don't know if my blade is blant or something. I really need it to work. How do I sharpen it? Thanks

[@MommyShareSpace]

Hi, and thank you! I believe someone else was having this exact issue, and I made this video that they said helped---> kzbin.info/www/bejne/aXjYd5WNn5dmg7s. A part of the video helps take care of that issue. It is at the time stamp 6:14 in the video linked. The first part of the video goes over a lot in this video you watched. It may be a dull blade, and I tried to share that later in the above-linked video. But it could be the issue I showed in that video. The more I took apart the machine, the more I learned. I hope it helps🙏🏿, and thanks for watching!

[@IELTS5to9]

A big thank from Pakistan.

[@MommyShareSpace]

You're welcome. Thank you for watching!

[@IELTS5to9]

@@MommyShareSpace Keep doing wonders.

[@chromakeyblue]

Great video. I have been looking for a paper cutter. Would your re-purchase this brand and model? Are you happy with the cutter? Any assistance would be appreciated.

[@MommyShareSpace]

Yes:)

[@mayaangkang]

Hello, thanks a million... You got one subcriber 😂😂😂 One more question, Whenever i cut the paper according to the paper size alignment given on the board/base the result of the paper angle of the corner is always wrong, it doesn't come out as 90° angel, it come as something like 100° .. please help! Thanks in advance..

[@MommyShareSpace]

Hi, Maya Angkang, and you're welcome! First, thank you for watching the video and also for subscribing! :-) To answer your question: In my HFS Cutter Review video (this is the link, kzbin.info/www/bejne/aae1mGSpZc-AntU), I pointed it out between 7:26 and 8:06. In this video, the realigning video, I pointed it out between 24:53 and 25:40. However, your question is excellent, especially since you phrased it according to the angle of the final cut. I just said it was not straight. Since I have held one to some of my end-cut spines from the past, I was able to measure it, and you are spot on, about 100 degrees vs. 90. This week I have some books I need to cut; I will do a short video demonstrating this. I hope the above information can help you, though. So thank you for your question also :)

[@MyCorsarionegro]

I have the same problem

[@azlanmohamad7784]

Hai...how to adjust angle blade 90° cutting...coz my blade not able to cutting straight 90° angle..please help me..

[@MommyShareSpace]

Hi Azlan. For some reason, your comment never showed up in my notifications. I just saw it while updating some text on the video. In the event, this information will still be relevant: Please check out this playlist---> kzbin.info/aero/PLOzH_9yWs6JTfhg9dQN2PXDnp5P-rpB6d I made several follow-up videos to improve this, and several people left some great tips under a few of the videos. I am also working on another video that I hope solves this issue and not just improves it. We will see. It should be out soon. Thanks for watching!

[@harshnicholas4001]

Hi , dear madam Very good tutorial about blade alingmement. I have a problem in my same machine that's pressure system on paper are not working properly..threads of long bolt damage.. again and again.. please give me the solution if possible. Thank you Harsh Nicholas India

[@MommyShareSpace]

Hi, I am not 100% sure I understand you correctly. However, if you're referring to the blade not clamping down on the paper correctly, this video here ---> kzbin.info/www/bejne/aXjYd5WNn5dmg7s . I tried helping with correcting that. The video has time stamps, so you can go to that section of the video:) Unfortunately, if the threads on the vertical bolt are damaged, I am not sure if that can be fixed. Looking at the machine, it seems it would require all three bolts to be removed to remove the metal plate to access the vertical bolt. That way, you can size and replace it at a local hardware store. But I have not done it myself; it just looks that way watching that part of the cutter. Once assembled, it would also need aligning. I hope that helps.

[@pkalapu]

Where can the blade in this mission be found separately? Plz tell me sister

[@MommyShareSpace]

Hi, is this the same question you were asking in another one of my HFS videos? I am pasting the same response here, too :) If it's not, please let me know. Hi, the blade can be found on Amazon. The 17" often goes out of stock, though. I have never had problems sourcing the 12" blade. I have one in my save for later cart to easily find and check for it, lol. It is in stock now. This is the link ---> amzn.to/3yz51pR if you're still interested. Please note it is my affiliate link. If you want to search it, try searching: HFS (R) Paper Cutter Blade for HFS 17'' Heavy Duty Guillotine A3 Paper Cutter. I hope that helps. Thank you for watching!