HEL PERFORMANCE OIL COOLER KIT INSTALL! | FOCUS RS

I install the Hel Performance oil cooler kit for MK3 Ford Focus RS!
The parts that Hel Performance make themselves are of the highest quality, as are the sourced parts - Mocal for the sandwich plate and Setrab for the cooler core are well known for being the absolute best available on the market!
I cover the whole installation all the way from removing the bumper to the actual oil cooler install and even throw in a couple of additional details for completeness.
These details are a full oil change which includes draining the old motor oil, replacing the drain plug with a nice new Mountune magnetic drain plug, installing a brand new Ford Motorcraft oil filter, filling up with new Castrol Edge oil and finally doing the oil change reset from inside the cabin!
The idea behind the Hel Performance oil cooler kit for MK3 Ford Focus RS is that under sustained heavy load (such as a track day!), oil temperatures can rise above optimal which can be detrimental to the engine. In order to bring these temperatures down, the oil is routed through the oil cooler which is essentially a heat exchanger fed by cool air at the front of the car. This would not be helpful under normal loads however as the oil needs to be at that optimal temperature - not too cold either - which is why you should always let the oil warm up after firing up the engine before driving hard. That is where the thermostatic sandwich plate comes in.
Made by Mocal, the sandwich plate both provides the take off ports to connect to and from the oil cooler but also is set to only do so after a certain temperature that has been determined to be ideal (92 degrees Celsius) and the rest of the time it simply bypasses the oil cooler and operates much like the car would normally, with the oil going into the oil filter directly!
Hel say:
When one of our employees experienced high oil temps in his own RS, we knew we had to help him develop the ultimate oil cooler kit. After a period of successful testing, it's now available for you to buy.
We knew straight away RS enthusiasts wouldn't want to drill or cut anything to fit an oil cooler, so we 3D scanned the engine bay to find the best solution. As a result, we manufactured a custom aluminium bracket to mount the oil cooler on the crash bar using the OEM mounting points. The cooler then sits in direct air flow behind the top grill, the perfect location for effective cooling.
We based the kit around the popular Swedish-manufactured Setrab Series 6 ProLine oil cooler. The 13 row option gives a great balance between minimising pressure loss while giving very effective cooling.
We've been using Setrab oil coolers for over 10 years without any issues and their performance is unrivalled. There are lots of cheaper imported options available, but none as reliable (there aren't many things worse than having a burst oil cooler!). In fact, we've had reports of front end collisions and the Setrab oil cooler was the only thing that still worked!
This comprehensive kit arrives with preassembled HEL braided hoses and anodised aluminium fittings. These AN10 high flow performance hoses deliver and return oil from the oil cooler to a trusted Mocal thermostatic sandwich plate set at 92°C (197.6°F). We've found the 92°C option gives you the perfect balance between cooling when needed and letting the engine warm up safely. It's also dangerous for the oil to be too cold and the thermostat controls the temperature with precision.
This direct-fit kit offers a safe and reliable cooling system for the iconic RS. It comes complete with easy-to-understand instructions and our technical support team are always happy to answer any questions you may have.
What's Included:
- Setrab Series 6 ProLine 13 row oil cooler with AN10 banjo adapters.
- HEL custom aluminium mounting bracket.
- Mocal 92°C thermostatic oil filter sandwich plate with AN10 adapters.
- Preassembled AN10 HEL braided hoses with anodised aluminium fittings (heat sleeve optional).
- HEL aluminium hose separator.
- Stainless steel mounting hardware.
- Installation instructions.
Get yours here:
auto.helperformance.com/ford-...
Mountune Pro Alloy intercooler install:
• MOUNTUNE V2 ALLOY INTE...
Check out my BigCartel store:
adamrainey.bigcartel.com/
Check out my Spring store:
teespring.com/stores/adam-rainey
Use code WL3327 to get $20USD/$20AUD/£20GBP off your first purchase when you spend $150USD/$150AUD/£150GBP or more at:
Whiteline North America: whitelineperformance.com
Whiteline UK/Europe: ukwhitelineperformance.com
Whiteline Australia/New Zealand: whiteline.com.au
Get 15% discount with code 'adamrainey15' at ukstore.turtlewax.com !
Check out www.becauseracecarbox.com and get your own awesome automotive goody boxes!
GET 10% DISCOUNT WITH CODE 'ADAM'!
Ships to Europe and USA as well as UK!
Subscribe to my channel: bit.ly/29hfAm6
Instagram: bit.ly/2930j8A
Twitter: bit.ly/2930j8A

[@moonchild666]

Super informative as usual. Thorough job too. 👌🏽

[@Fredrik_ST_wagon]

Brilliant, this was a great video Adam! I'm thinking about getting one of these for my ST, with the thermostat i should be able to run it even in winter.

[@jessebudelman]

That piece of equipment looks pretty damn good, might have to get one. Great blog, seems very helpful.

[@AdamRainey]

cheers Jesse :)

[@alandonnelly9788]

Great video again Adam HEL looks so cool not sure I'd attempt that myself just not as brave as you mate 👍 great job 👍

[@scottlancaster9737]

Yeh, looks awesome!! Pretty straight forward aswell, I’m going for the Airtec cooler to match the intercooler with the blue logos, Great video, very well detailed, I will be using this to refer to when installing mine over Easter! 👍 Pretty much the same directions. Perfect job, well done 👌👌

[@Lee-st7cf]

Awesome job Adam 👍🏻

[@AdamRainey]

Thanks Lee 😊

[@normanbates2260]

When you doing the rear brake video,got mine ready to use yours as a reference.👍

[@adamfrancischiello]

Awesome Install

[@madmike7855]

Awesome video and have the same fitted to mine!!!

[@acemclovin5738]

Very informative videos I've loved watching them as I've been planning on getting a MK3 RS. Would you recommend buying one as I've also recently seen a video from BD Performance made about a year ago concerning these engines blowing up/the block cracking and there are also a lot of comments on that video with many people having the same issues with this engine block going bang and slating the engine which has put me off a bit unfortunately. whats your take on that please?

[@hdmk213]

Wow that's a lot of work! End result looks great though

[@markofford9307]

Great video Adam, thinking about adding this to my ST to help with trackday temps! One question, do you not need to prefill the hoses with oil to avoid air in the cooler or does it work itself out first time the thermostat opens?

[@AlphaFlight]

I managed to put one together myself for 140. An lines and nylon braided lines as well

[@reneboycastro8000]

Nice modes

[@andrewvanroo1498]

Hi Adam. Great Video! Do you think the HEL intercooler will work with Velossatech's Air Intake?

[@AdamRainey]

Hi Andrew, it does indeed fit with it! Cheers 😊

[@andrewvanroo1498]

@@AdamRainey Thank You! Appreciate the quick reply.

[@davymaekelberg]

Even the headlight connector has the same color as your car :D

[@st_banda]

Hello.. Amazing video, you conviced me :D what was temperature drop ?

[@AdamRainey]

Hello, it isn't really about temperature drop, it is about maintaining a temperature window so once up to the ideal operating temp, it should remain there no matter how hard you drive and from my experience so far it does the job!

[@st_banda]

@@AdamRainey thanks for reply. this will be my next mod :D

[@markcoleman304]

✌🏼

[@2012JRB]

Not using 5w 50 oil?

[@AdamRainey]

no, I am using the exact recommended oil for the RS engine in Europe

[@2012JRB]

@@AdamRainey wonder why you guys are recommended a different oil.

[@kinecty111]

@@2012JRB that also had me very confused

[@namethatcorn2879]

So should I go with this brand or mishimoto?

[@AdamRainey]

Hel is superior in my opinion

[@gbass7328]

0w40 oil not 5w50??

[@AdamRainey]

no, I am using the exact recommended oil for the RS engine in Europe