Hella HID Projector installing Chrysler Crossfire. Retrofit

[@theearloffunk7223]

Nice video man. Its nice seeing videos on this car, not many exist.

[@russiaauto.travelvlog1302]

Thank's! Yeah, its rare here in Russia, but there is one more totally the same in my city lol.

[@Club-Thirty-Three]

Excellent job. Lots of work but the results look beautiful.

[@ViscountSinistere]

Nice vid mate ,you are very brave and confident ,could have been a disaster .no fear ,excellent !

[@Dmitriy_Poludin]

ViscountSinistere thanks! No courage - no HID lol

[@ryanreynolds7771]

Hello Cheers from USA you must heat headlight in oven at 200 degree F .. for like 10 min to soften seal then must use same sealant to install plastic lens. I have same color Crossfire as yours best of luck

[@ryanreynolds7771]

one more thing be very careful because new these cost $1000 or more a piece new from Chrysler even used they are very hard to find and on Ebay $799 or less depends on vender

[@glencouls]

I admire your dedication, but you can get to both lower headlight bolts from the access door in your wheel well. If you want to get access to the left headlight, just crank your wheel all the way to the left, open the access panel with a large regular screwdriver, and thread your hand and wrist up to the headlight with your wrench. It's a bit tight, but can be done with an openend wrench you only get about a quarter of a turn with each twist and it's slow going, but 5x as faster then pulling off a bunch of stuff you dont need to pull off.

[@ryanreynolds7771]

Dude you have more balls than I got... to replace one of these headlights is very expensive since there are no aftermarket headlights available like for the Ford Mustang. I also own a 2013 Ford Mustang and I find tons for aftermarket parts for the Mustang maybe China will get involved to build cheap knock offs if there is a market this car is to rare to get aftermarket parts. I give you tons of kudos on ingenuity to take the bull by the balls. cheers

[@ryanreynolds7771]

I get my crossfire perhaps tomorrow depending on weather, I paid $1700 dollars for my car same color as yours. I look forward more off your crossfire videos

[@avonettrahunt8760]

😅

[@ryanreynolds7771]

you must remove bumper cover those bolt with holds are for headlight adjustments upper and lower to adjust

[@armonianumerica5830]

This is so crazy...I was suffering the whole process. Can t work this project 4 my x fire...too hard...it is some scary shit..but great great work bro..thnks 4 posting.

[@russiaauto.travelvlog1302]

U r welcome, man! Don't worry about the complexity of process, just start doing that and you will make it for sure) I was afraid too.

[@turbocat1984]

IKR! I was like holy shit! Would feel like butchering it! Parts are SO hard to find in my country (in 12 years of having one have only ever seen another two) would be too scared to try if I fucked it up!

[@ryanreynolds7771]

you must bake headlights in a oven cant remember temp to open them and plus sealing is a problem once opened

[@maxcichon]

You can access the bottom housing bolt through the removable door for the foglights.

[@russiaauto.travelvlog1302]

Oh, thats great idea, thank you!

[@maxcichon]

Great job, my man. I sold my '05 Roadster 6 months ago. "Scarlett" is her name now. Nice lady in Louisiana bought her.

[@russiaauto.travelvlog1302]

And what you bought after XF?

[@LordTwaddle]

I'm tempted to try this but I'll chrome the light pods, satin black the holder and add LED running lights.

[@russiaauto.travelvlog1302]

Nice idea! Is satin means glossy? And what the holder is? As for me I like old lamps more than LED, next year I want to put orange DRL + turn signals instead hi-beam, and install bi-xenon projectors. But I still don't understand how to make turn signals work as DRL also. Have any idea?

[@russiaauto.travelvlog1302]

looks like satin is matt

[@Nick-ko1tw]

Wait.. why did he cut the housing??

[@theoriginalmungaman]

You didn’t have to cut anything! You heat the light in an oven to soften the glue and they come right off!

[@russiaauto.travelvlog1302]

not on this car

[@BEERSnGEARS]

1:21 "Blin" What does that mean? BTW it was hard to read, looks like it was only there for 1/8 of a second.

[@russiaauto.travelvlog1302]

haha)) Blin translates exactly as a pancake. We use it as very very soft F-word. As soft as you even can use it in community:)

[@BEERSnGEARS]

Russia Auto.travel vlog oh, thanks

[@russiaauto.travelvlog1302]

And I started saying that blin, this silver stripes glued or even melted to the front grill)))

[@BEERSnGEARS]

Russia Auto.travel vlog I know these Chrysler crossfire's get moisture in the headlights even when stock. Have you had any moisture issues fogging in the headlights since you put these HIDs in? I'm concerned that if I cut open the plastic it's going to cause moisture to get in there even more than it already does

[@russiaauto.travelvlog1302]

I never had moisture before in stock headlights, but after I cutted them, left one is still ok, and right one has not even moisture, not just foggin, but almost waterdrops now. But my friend also, made same thing with headlights several times and he covered seam with nice thick layer of silicon, and he told me that everythig is perfetto, no moisture at all. So don't worry about that if you have enough of glue))

[@Matt_from_Florida]

Why? Why do you have to *BLAST THE MUSIC SO LOUD?*

[@jujuju3384]

Every designer should be made to change the headlight! And punched in the face for every 5 minutes it takes! Perhaps they would make it more simple/straightforward ! And don't get me started on changing bulbs!!

[@rich9750]

I got a 2004 Crossfire with 38,000 looking for a crossfire group anyone have a website

[@se7encapadon]

Wayyyyyy to much fuqn work 🤷🏾‍♂️

[@jonathansirmons7932]

Dude fuck that I'd rather just keep the halogens then go through all that

[@russiaauto.travelvlog1302]

thats true! And 2 months ago I remade it again with Bi-leds from land cruiser 200, and it was even harder! But the illumination now is brilliant!

[@pequlatv4814]

This is so wrong, russian tuning a german car to be more american...done