[206] How To Defeat Overset Pins: Prevent, Identify, and Fix Overset Pins (Learn Lock Picking)

[@HelpfulLockPicker]

Please Stay Tuned For Lock Picking Home School Videos! If you have any topics that have not been covered and you would like to see me cover them please let me know below!

[@michaelwooleyhand3523]

8y⁷⁷⁷⁷777⁷⅞the

[@j.d.5354]

Really nice video! Finnally I opened a lock (FAB) I´ve been trying to open it for couple of weeks. I have one question, because, in this FAB lock there is really not lot of space - do you have some method how to recognize which hook to use? I mean this - you suggest to use deeper hook, but when there is no how to it put into (snake shape of key)? Is it (this advice) usefull for more locks than this? Or, do you have (in this video) choosen lock just to show what is going on in it (lock easy to pick)? Thank you.

[@jodyrobertson996]

How to pick smart 🔑

[@acetech9237]

Where can I purchase this cutout lock?

[@Nikkiflausch]

The trick with the quick swipe through the bible under lighter tension to release overset pins without losing everything else was fantastic, thank you for that.

[@HelpfulLockPicker]

Thank you for checking it out

[@rosskey5481]

As a relatively new lock picker I would say this video is the best I've seen in explaining the difference between the feel of a set pin and unset pin. It is going to help me a lot as I improve my lock picking. I suspect I often overset pins and now I think I have a much better chance of identifying them. Thank you very much for making this video. 😁👍

[@HelpfulLockPicker]

Thank you for the kind words and I am glad that it helped :-)

[@johncampbell875]

It's very clear. I agree

[@johncampbell875]

Liked , subscribed

[@NuniqueNewNork]

Back to front is the easiest to learn. As you go, try to memorize the order of pin friction. Try to work in the order of most friction to least, per pin. Expect to start over again at least 5 times until you learn the friction order. Sometimes the pin shapes and side bars will fool you. But after getting the pin order, you can memorize the heights, and bypass false sets.

[@HelpfulLockPicker]

Thank you for sharing

[@davidharrell5927]

5 stars on this one!! Great job explaining everything. I struggle with overset, newbie move though.

[@HelpfulLockPicker]

Thank you for the kind words and I'm glad it helped :-)

[@jobustify]

A great video all beginners should watch. As a novice, oversetting is definitely my most frequent problem. As you point out theres a feel to the process that you have to develop. Back to practice for me!

[@HelpfulLockPicker]

Thank you for the kind words and I'm glad it helps!

[@raygodwin3496]

Hands down the best and most detailed technical lock bypass troubleshooting techniques your ever going to find on the web. Thanks.

[@HelpfulLockPicker]

thank you for the kind words and I'm glad they help :-)

[@danmcdonald8736]

I've been struggling with over set pins. I accidently developed a weird technique where I over set one of the pins and I'd back off tension and the lock would open. It works for easy masterlock, but anything with security pins isn't working. This should help me unlearn my bad habit. Ty!!

[@overlord7877]

Thanks mate just subbed. I've been watching LPL and BB but they dont realy explain it in as much detail as you did.

[@HelpfulLockPicker]

thank you for the kind words and I'm glad it helped :-) thank you for the subscription!

[@MikkoRantalainen]

Be sure to check the LPL "LockPickingLawyer - Inside Perspective Series" series that contains 6 videos with cutaway locks that he published about 2 years ago. That should explain things very well and has superb video quality. I think the video about disk detainer locks may be a bit hard to follow if you don't understand the mechanism already, though.

[@gargoyleb]

Thank you!!! You get to the point, stay on topic and speak clearly and intelligently. Good job.

[@FostersLab]

Thank you so much! I just got into lockpicking, starting with padlocks, and oversetting pins is my biggest problem right now. Top of the keyway tensioning makes more sense, but I don't think my tools are the most appropriate for that, yours seems to have the right shape! Thank you very much for this video, I'll go and watch the others :)

[@HelpfulLockPicker]

TOK makes a huge difference. I wish you luck and thank you for checking out my videos!

[@paxcgamer]

Thank you! With your tips I was able to get this old stubborn padlock open much easier. Thank you for sharing your knowledge.

[@tunafish3216]

Good picking I have been doing this out in my garage for two hours got peod and came back in the house. Now I have to go back and try again, thanks for the advice.

[@HelpfulLockPicker]

Thanks for checking it out!

[@thepeacefulviking3687]

Hell I've been watching these vids all night and I still cant pick a real lock. Not the video's fault at all I just dont have the knack for this as a hobby.

[@LockpickingLeo]

I found this very helpful as I've been struggling with a squire lock that has low set pins in the front and high at the back going to use what I've learned from your video and hopefully get it open this time, great video and thanks for the help.

[@maplobats]

Wow! I would like to thank you, your videos have been - by far - the most helpful to me (probably many others) in advancing in this hobby. You really do explain this stuff very well.

[@HelpfulLockPicker]

Thank you for the kind words and I am glad they help!

[@JFTL81]

Very informative. I’ve been practicing on a master lock and my successes have been pretty random. I think I’m oversetting a lot and this explains at least part of what I’m doing wrong. 👍🏻

[@HelpfulLockPicker]

Just keep practicing everyday you'll be amazed how good you can get in a short amount of time

[@idlehour]

Thanks for the videos i appreciate and respect the time you take to make these videos. Lock picking has become my "fidget spinner" after a long exhausting day at work its a good focus to help my mind stay calm lol

[@HelpfulLockPicker]

Thank you for the kind words! These videos are fun to make and I am happy they have helped many. This is a fun hobby and even a better community.

[@scottrowe3712]

Thank you for this video. I only got into lockpicking a few weeks ago, and I've been trying to pick a 6pin cylinder lock for nearly 2 weeks. I finally got into it today because of this video. Thank you

[@HelpfulLockPicker]

How is everything going now? I am a bit late to respond but hope your progress sis coming along well

[@hankfisher4229]

I think this may be your best video yet. VERY good job!!

[@HelpfulLockPicker]

Thank you for the kind words and welcome back? I haven't heard from you in while. I hope all is well 😀

[@krishokanson1881]

So many beginner videos don't even mention oversetting. This video helps a lot. Thanks.

[@aaronseaton3301]

I have a Defiant deadbolt lock ive been working on for a while and i believe i keep over setting a couple of pins. I have tried very little tension, moderate t3nsion, and hard tension and i still cant get it. I am at the point where im about to give it up and throw it away. Please help??

[@milanm2239]

I have one about a week old, same thing. The only luck I had was picking the lock in reverse and then using a plug spinner to unlock it. I was surprised as this is the cheapest deadbolt sold in homedepot. Adjusting picking method and tools will help. They definitely are putting more security in the locks. At least disassemble it to see what makes it so hard to pick. Good luck.

[@psychowolf5552]

Just picked up the hobby and your videos although old have been very helpful thank you

[@robertmeineke2174]

Thank you very much sir. I was pretty sure that this is what i have started running into. It was very helpful to me. Thanks again for making thses videos. It is very much appreciated and you do a great job with them! Have a great day!

[@darylh4923]

I stumbled upon your channel looking for the definition of a "false set". Wow. Although, I've been watching other popular lock picking channels, I've missed and overlooked the essential basics you're discussing here. NOW, I've got better understanding of what the terminology means as discussed on other vids and what I've yet to understand and apply :) I'm enjoying your practical step by step methodology in your basic videos that is now giving me hope that a no talent lock picker may someday attain basic practical knowledge ;) I'm looking forward to watching more of your vids to grow further. Great job, keep it up!

[@HelpfulLockPicker]

Thank you for the kind words and I am glad they help!

[@curthatt6461]

Great info. I think this is one of my main troubles. Always having to let up a bit to drop oversets. I’ll put your tips to the test as I practice.

[@HelpfulLockPicker]

Thank you for the kind words and I wish you luck. Please let me know if it it helps :)

[@macnutz4206]

Thanks much, this is very useful. I have been dealing with this issue. Finally realized I needed to use a deeper hook, or the tron or offset hybrid, to avoid oversetting with the shaft of the pick. So far, I have just had to start over every time. I shall practice your suggestion for recovering without all dropping all of the pins you've set. Very useful stuff.

[@HelpfulLockPicker]

Thank you for the kind words and I am happy to hear it helps :)

[@djmariomar]

I am on my first month aft.er getting into lockpicking and overpin has definitely been a challenge, thanks for the info

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps!

[@daphneraven9439]

Tysvk 4 the clear, concise description & directions -- with awesome tips, no less! :D

[@HelpfulLockPicker]

thank you for the kind words and I am glad it helped :-)

[@conditionone2320]

Looking back, I've totally overset pins in the past and just not been able to diagnose it. Thanks very much for making this video.

[@HelpfulLockPicker]

Thank you for the kind words and I'm glad this helps!

[@goadken]

I like raking with moderate to light tension to grab a false set and then leaning heavy into the tensioner for SPP'ing the final pins. This gives me the best of both worlds and allows me to determine via SPPing if I have overset anything before wasting too much time. Great video. Glad I found you. I am now a subscriber!

[@HelpfulLockPicker]

Thank you for subscribing and sharing!

[@yasinhenfs4540]

what means SPP? :o

[@goadken]

S ingle P in P icking. SPP @@yasinhenfs4540

[@lukeconway1831]

This video was very very helpful and interesting, thank you so much!

[@HelpfulLockPicker]

Glad it was helpful!

[@briangreer6286]

Thank You a ton HLP.. Im a newbie too and sitting at home because of the virus. This over setting is a issue with me too. I now have a totally new outlook thanks to you. Thank you again Brian.

[@HelpfulLockPicker]

Thank you for the kind words and I am glad this helps!

[@JoeNunes345]

Very good information. Do you have any videos on how to pick, or drill anti pick, anti drill Yale Euro locks, or similar locks used in PVC doors? Many thanks, Joe.

[@HelpfulLockPicker]

I do not personally. Check out boredlockpicker or russej02 (both run by same guy) he drills locks on his channel and may have a video

[@JoeNunes345]

Thank you very much for your prompt reply.. I have subscribed to your channel. Have a Great weekend. Joe.

[@gioxxgioxx3705]

​@@HelpfulLockPicker When opening the lock on the armored door, it is very difficult. I expect that there is a pin that is a trick. Is it possible to know the reason for not opening it? Please reply.

[@evhfan]

Excellent teacher I have learned very effectively from your videos thank you for the time and effort you put into all of this

[@HelpfulLockPicker]

Thank you for the kind words

[@Raphaelo325]

Great video! You present information in a specific and straight-forward way. I especially like how you describe your auditory and tactile sensations BEFORE, DURING and AFTER each scenario. If you can believe it, I am still stuck on a Master lock #3. I think this is primarily due to the fact that I don't understand or sometimes notice the feedback coming to me, which decreases the accuracy of the mental image I have to work with regarding all the components and inter-relationships going on inside the lock. Although the "sensations" you describe are qualitative, your description provides an excellent starting point on what I should be "feeling and hearing" and "why", on a much more definitive level. Yes, I am a biologist, and yes I tend to "overthink" things. However in the case of lockpicking, I can use my science training to my advantage, I just need to find teachers that "speak" my language. Lastly, I will close with the fact that I realize that there is an "art" to lockpicking, that cannot be approached scientifically. It has to be "felt", "sensed", and "experienced" thousands of times, and thousands of times again. Thanks for all the advice!

[@HelpfulLockPicker]

Thank you for the kind words, if you enjoyed this video I recommend you check out my Lock Picking Home School series, it has a lot of videos much like this one. If you are just starting I would not bother with a Master Lock No. 3, they are built poorly and are not great to learn on. I would buy a Kwikset lock and learn to progressive pin that also the Brinks 40 mm laminate padlock gives great feedback as well. You want to start off on lock that give obvious feedback because it will help you learn. Also, if you go onto eBay you can find some cutaway locks which are useful for you to teach yourself different scenarios. Just keep at it, pick a lock everyday, and you will be surprised where you are 6 months from now. There are so many great people in this community with many different backgrounds, it is nice to hear you are in biology, I work as a nurse in an ER.

[@Raphaelo325]

@@HelpfulLockPicker Thanks for such a fast reply. I have the Sparrows' Night School pickset and cut-away practice locks and also the Revolver(non-cutaway). I have been able to pick the three cutaway practice locks from Sparrows, albeit not consistently. I thought I would move up to the Master #3 because of how ubiquitous it is and that everyone on these channels makes fun of it. I thought I would sail through it but I was quickly humbled. I saw BosnianBill pick it with modified, cat food can lids, zip ties, and even a and near broken bamboo skewer! I have been able to pick it, just not consistently and I have a lot of difficulty raking any of my locks. I watch a lot of videos and assimilate information quickly, just the practice part is looming large. I am going back and forth between cutaway locks and non-cutaways, to try to develop my "feel" for what is happening and to put a better mental image together. I hate to admit, sometimes I can't tell what pin I'm on (besides the first and last). I am going to invest in a vise and see how much that helps, however lock-in-hand training is important to me to be effective out in the field. My expertise is as a wetland biologist, especially freshwater macroinvertebrates. Tall respect to nurses, thanks again!

[@HelpfulLockPicker]

@@Raphaelo325 I will be completely honest with you my most used approach when opening up a Master Lock No. 3 is zipping. It works like a charm every time and no reason to take it any further. I highly recommend the Kwikset lock and you can add security pins as you go. Also check out my Progressive lock list in the video description but I do recommend you skip down to the Brinks because that is the first lock on the list where you actually get great feedback and it is a good experience for learning.

[@Raphaelo325]

@@HelpfulLockPicker Thanks again for all the helpful advice! I will make it a point to find that Brinks 40mm and take a look at your progressive lock list. All the best!

[@jamesstrain7062]

Nothing worse than that mushy feeling pin that oversets without a sound. Then everything gets springy or an already set pin or pins drop. One of your better videos, IMO. Keep it up.

[@HelpfulLockPicker]

Thank you for the kind words!

[@Stonesand]

Fantastic. Helped me identify several problems I've been having as a novice!

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps

[@lukepippin4781]

I like to actually turn my pick against the tension in putting on the core with my tensioner, that way I get very controlled counter rotation almost as if I’m setting a spool. Most of the time when I do that, I can listen for one click inside the lock and that gets rid of the overset issue. Doesn’t work every time, but it does work pretty often.

[@ashleymarie7452]

Another excellent video! Thank you. While I enjoy watching the LPL, I find your videos have much more USEFUL information. One could watch the LPL all day and not learn HOW and WHY lockpicking works! Also, I was wondering if anyone has ever put together a series of charts or a computer app that would allow you to enter the make and model of a lock, and be able to pull up a list of vulnerabilities for that lock, (shimming, raking, tapping etc) as well as the best pick(s) and type of tension/tensioner for the lock. Also, rotation direction, whether or not the lock has security pins, and any other information which would help arm a lockpicker BEFORE they attempt to defeat a lock. That would be of great value and would save a lot of wasted time/effort! The Pareto rule would apply here. Only about 20% of the models of locks on the market make up at least 80% of the locks that lockpickers would need to be able to pick!

[@HelpfulLockPicker]

I am not sure but that would be a good list to have

[@czechmeowt2868]

First week of lockpicking - this was incredibly helpful!

[@HelpfulLockPicker]

Thank you for the kind words and I'm glad it helps!

[@johnschultz2000]

Thanks very much enjoy watching LPL and Bosnian bill ..but this is so much more Informative since I'm a Noob and I haven't even opened my first lock yet, but I'm sure this is going to be my new hobby, Love the community and the comments..

[@HelpfulLockPicker]

Thank you for the kind words and I am glad this helps! If you have any questions down the road feel free to ask :)

[@FriedPi-mc5yt]

Very informative. I just subbed and I’m going through your older vids little by little. Good stuff!

[@HelpfulLockPicker]

Thank you for the kind words and the sub! My Lock Picking Home School playlist has a lot of great beginner videos :)

[@robbiedaniels5508]

i just said you're very informative i do appreciate your approach and your monologe it helps a lot when you're learning to know the terminologythanks a lot

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps :)

[@robbiedaniels5508]

i can't believe you responded very cool

[@philhart9800]

Good instructions, good visuals

[@HelpfulLockPicker]

Thank you for checking it out

[@jeffdowling1682]

I’ve been practicing on a front door lock that we didn’t get keys from the previous owner. I know it’s a very old lock but I get nearly no sound feedback. I had gotten it a handful of times but no consistency. I couldn’t figure out why I would get no binding pins and start over. After watching this I picked it in 30 seconds and I feel like I actually knew what I was doing instead of just persisting and luck. Thank you so much for this! Edit: Hours later and I haven’t gotten it again. The inconsistency makes me wonder if its the lock or me but I don’t have another lock with security pins like this to practice on.

[@HelpfulLockPicker]

Thank you for the kind words. I would be cautious regarding picking locks in use. You don't want to break them. Also, make sure you only pick locks you own or have permisison

[@robrisla3]

Nicely explained and demonstrated sir. Well done and keep up the excellent work!

[@HelpfulLockPicker]

Thank you for the kind words!

[@3daypriest]

Pretty much a beginner here. I bought the Sparrows Progressives and the bitting on #3 is with the first pin low, then high. After having a lot of trouble opening the lock, I found that what you said about changing to back to front makes a big difference.

[@HelpfulLockPicker]

Thank you for sharing and I'm glad that the video was able to help :-)

[@RionPhotography]

Thanks I got the lock in my hand open before the end of the video 🎉

[@iamshakma4231]

Great video. I think this has solved some of my problems. Thank you.

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps 😊

[@JasonCarlson]

Great idea for the newbies... Keep up the great video work!

[@HelpfulLockPicker]

Thank you for the kind words!

[@acetech9237]

I'm a professional Automotive Specialist but I find this stuff absolutely fascinating.

[@HelpfulLockPicker]

Thank you for sharing

[@markstr8309]

Great video i'm staring at a six pack of 1100s I was feeling a little intimidated until I saw your video this is the most useful information directed at a single series lock I have seen in one place at one time bringing many tips together at one time.Great video man!

[@HelpfulLockPicker]

thank you for the kind words and I'm glad it helped :-)

[@sapaterokoallan4165]

thanks sir this also my job in philipines,thanks for your tutorial,help me a lot.

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps!

[@frankbiz]

Awesome, you are a great teacher.

[@HelpfulLockPicker]

Thank you for the kind words!

[@sleutelassistancebernard3702]

Using top of the keyway tension makes it difficult to pick the first pin?

[@minkymoo4794]

Thank you HLP. This vid addresses the hassle I`m having. Very good.

[@HelpfulLockPicker]

Thank you for the kind words, I am glad it helps!

[@ronheitz5671]

Very helpful. Great presentation

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps!

[@gioxxgioxx3705]

There is a trick pin in armored locks. How can I know it and open the lock because it is very difficult, knowing that the number of pins is only 5. Sometimes I open it, but it is a coincidence. Is it possible for you to explain it to me? Many thanks. 

[@iloveddlc2007]

Thanks, this saved me a lot of time

[@HelpfulLockPicker]

Thank you for the kind words

[@stephanpiotrowski1524]

Great video that explains important concepts that seem like they would be critical to any beginner tutorial, but they always seem to be omitted. Do you have a video that covers very basic positioning of the picking tool in the keyway? Most videos gloss over any details. You raise an important point here with the shank of the hook lifting pins that you're not trying to pick. I can see this happen with my Sparrows cutaway lock but I've never seen this mentioned in any beginner video before. Would be great to have a tutorial for positioning and manipulating the picking tool in different keyways, and what style picks work better for which.

[@HelpfulLockPicker]

Thank you for the kind words. Perhaps this video would be helpful kzbin.info/www/bejne/bJvTpZ6diK6Mqrs

[@CameronDunn]

Great tips and reminders, thanks for sharing.

[@HelpfulLockPicker]

Thank you for the kind words!

[@magicdave93]

Very interesting, I get this program all the time thanks for posting. 👍🙂

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps!

[@Weebwe]

Most helpful information. Your efforts are appreciated!

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps!

[@ronheitz5671]

Very helpful. Great explanations

[@HelpfulLockPicker]

Thanks for checking it out!

[@LockpickingsGal]

Great video!! I caught myself doing this and now I can have some tips to correct this. Thank you!!

[@HelpfulLockPicker]

Thanks for checking it out, I am glad it helps :)

[@rickardhasselblad5700]

Working on my Abus 65/40 and I've started to hate the damn thing because it's teaching me so many hard lessons! I keep over tensioning , over-setting pin 2 and 3.. starting to question the pins (have they changed from spools and thrown in a serrated one in nr 5?). I hope this video will be part if the solution or Im gonna get a hernia out of frustration.

[@PDXJack87]

All great tips. I'm only 1 week in and I had bunch of these problems. I hate going low to high. I only have a standard hook and a hybrid hook by sparrows. (I don't wanna buy a bunch of tools if I can't master the simple ones) I hear their kickstart kit is all you need to learn to pick.

[@HelpfulLockPicker]

Honestly you only need a few picks and top of keyway tensioners and bottoms of keyway tensioners to be successful. To open 95% of the locks I work on I use my Peterson Hook1 Reach in 0.025" or my Peterson GEM in 0.018" All you need is a short hook and a medium/deep hook. I like to have the slightly thinner one for locks with a bit of a more difficult keyway. Just keep practicing and you will get there. If I were you I would save your money for more locks.

[@PDXJack87]

@@HelpfulLockPicker yeah I think I need some TOK tension bars. It would allow me to attack some pins from a steeper angle. Sometimes I can warp the pick side by side with the BOK tension bar, but I feel like that's bad practice. And makes manipulating the key pin not as accurately. And exactly I'd rather spend more money on locks. I have 3 practice locks from sparrows night school kit. And just a few master locks lol. It's either too easy or too hard. I need something more in-between

[@HelpfulLockPicker]

@@PDXJack87 I like a generic Kwikset and add security pins and change up the key bitting. It's a great lock to learn on

[@CleatSurfer]

Thanks for this. I’m still just a beginner picking the Master locks. I can pick them reliably but most often, I’m over setting pins. With tension on, none of the pins are moving or giving any feedback. I’ll relax tension and hear a click but it quickly gets back to the the same state. If I’m persistent, I’ll hit the right spot and open the lock. If it’s getting frustrating, I’ll put just about any rake in the lock and with just the slightest touch open the lock. Usually, I’ll zip a snake rake or a bogata. Zipping with the hook never seems to work though. I’m using Sparrows picks with bottom of the keyway tension.

[@HelpfulLockPicker]

Thanks for sharing! I enjoy zipping with a hook but it only works on easier bitting

[@ILentz]

Thank you, very helpful. Subscribed.

[@HelpfulLockPicker]

thanks for checking it out!

[@ricksanchez3204]

As far as your more common/basic/lower security locks i like to just let them all drop and start over, it just doesn't take enough time to go back and hit them again to worry about plus.. more practice. But i can see that some locks would take a great deal of time and not be worth it. Plus I guess I'm kind of skipping practice for tensioning

[@TheDiamondDestroyer-kc1id]

Thanks this is very helpful! Now I can get a new computer!

[@HelpfulLockPicker]

Thanks for sharing, just make sure you don't pick locks in use

[@lesrinehart933]

Keep up the good instruction

[@nickrogers3624]

Decided to take a look and see if I could figure out why I was struggling to open the new lock I picked up. I am confident it is a pretty low grade lock as it is a master lock meant for a trailer hitch... As it turns out its literally just that I don’t have a tension wrench that gives me enough room to pick without oversetting and many of the pins are super rough with little to no lubrication. Looking to actually start lock picking as a career... still got a little ways to go I suppose.

[@HelpfulLockPicker]

Thank you for sharing

[@mrcritique.3773]

That was very educational. Thank you! From a beginner 👍

[@HelpfulLockPicker]

Thank you for the kind words. If you have any questions down the road feel free to ask. I am easy to contact.

[@mrcritique.3773]

@@HelpfulLockPicker Thank you.

[@joshuawatson5632]

Maybe that's why I've been struggling so much. I only have a bottom tension wrench and wasn't aware there was a difference. Thanks for the video, that's a sub from me!

[@HelpfulLockPicker]

Thank you for the kind words and in glad the video was able to help :) let me know if you have any success and thank you for the sub

[@stephanpiotrowski1524]

FYI you don't need a special wrench for top tension, although it may be more convenient. You can apply tension in the top of the keyway with a standard tool but you may find you can only tension in one direction without the tool falling out.

[@Jason_Music]

Can you make a video on zero lifting pin and how to detect them from start ? Because they feel like they are binding right away although they should stay in the zero position. Very nice video dude thanks a lot !

[@HelpfulLockPicker]

Thank you for the kind words. That is a good idea. I will try to do one of those in the future :)

[@Jason_Music]

@@HelpfulLockPicker looking forward to that dude ! Thx

[@peteboggy4435]

Great vid and information buddy. One of your best yet.

[@HelpfulLockPicker]

Thank you for the kind words, in glad it helps!

[@bikkies]

I'm quite new to Locksport but am slowly getting there. I still overset but not quite as much as when I first started. For me at least, oversetting often comes from the beginner's belief that you have to jam the pin all the way up to the moon. As I've progressed I'm developing a gentler touch and backing off more when I get a click or similar feedback, moving to other pins to test them. I can always come back if it needs a little more. As with all worthwhile hobbies, practice practice practice...

[@HelpfulLockPicker]

When I work on serrated pins often take that approach just lift a little bit and move on. Oversetting gets really tough when you start to work on challenge locks with serrated keypins with serrated bibles, those keypins love to stay overset and not drop back down. Lock picking is a fine art form and like you said practice is the number one tool you have to get better!

[@bikkies]

@@HelpfulLockPicker thanks for the quick reply. Though I'm still green when it comes to picking, I love gutting and building challenge locks. Lots of high/low, serrated things everywhere, threading the core and (where possible) the bible. I've started undercutting too. Varying the springs. Needless to say, I cannot then pick the monstrous frankenlocks that come out of all this!

[@HelpfulLockPicker]

@@bikkies it's no problem, I try to respond to the comments when I can. And also if you are ever interested in making a Kwikset challenge lock I wouldn't mind trying it out but I really do dislike serrated Bibles, I find it to be cheap trick LOL. I am a big fan of creative pinning.

[@bikkies]

@@HelpfulLockPicker strangely enough, I'm working on a kwikset clone at the moment. They're hard to get over here in the UK where it is all about Yales, euro cylinders & tight paracentric keyways. I vary my butchery and am beginning to think a little more intelligently about which mods to apply in combination with often homemade pins. If I can come up with something I'll send it over, more likely for interest & critique than just being an impossible pick. That's how I'll learn.

[@bikkies]

@@HelpfulLockPicker the Kwikset clone I'm working on should be finished soon. I'll be keeping the bible unthreaded as suggested here. Not quite sure how DMs work in KZbin, having never used them before here, but if you could please let me know your mailing address then I'll get this sent over to you in the next few days. It probably won't be very challenging for you but I'd be genuinely grateful for your critique on what works well and what you'd change. This would be the first challenge lock I've ever sent away so please be gentle with me :) Thanks.

[@alexbrito2139]

Good info

[@HelpfulLockPicker]

Thank you for the kind words and I'm glad it helps :)

[@wantedule]

When I menage to pick a lock in one direction, I usualy can't pick the same lock in other direction. So make a video with picking lock in both direction please and explaine what's may be the reason.

[@HelpfulLockPicker]

The binding order changes. Check out a plug spinner, this could be your answer

[@Sonic110a]

How do you deal with overset pens and locks with spring tension on the core? I have a Master Lock m1 with what appears to have only four pins but pin to and pin for have deep bidding while pin one and pin three have shallow bidding and of course this lock has spring tension on the core.I have been able to rake this lock open but I have not been able to spp it, it's about to drive me crazy

[@HelpfulLockPicker]

Try using more tension and / or a deeper hook

[@chriserickson4417]

Thank you for the excellent video!

[@HelpfulLockPicker]

Thank you for checking it out and I am glad it helps

[@Trendsetta89]

What is thae name of that type of open lock you have here and where can i find one to buy just like it?

[@HelpfulLockPicker]

It is a "cutaway". If you are from the US you can find them on eBay easily

[@duckyjp17]

So helpful. Thank you.

[@HelpfulLockPicker]

Thanks for checking it out

[@maluridae]

Great advice and clearly explained! Ty :)

[@HelpfulLockPicker]

Thanks for checking it out

[@stevemartinism]

Really needed this.

[@HelpfulLockPicker]

I am glad it helps!

[@jenserik37]

Really good tips

[@HelpfulLockPicker]

Thank you for the kind words.

[@nu77byte49]

great vid, I always seem to struggle on small locks like how to hold them my current bugger is a lockwood assa abloy 4 pin 110/30

[@HelpfulLockPicker]

Thanks for sharing

[@nu77byte49]

@@HelpfulLockPicker On another note do you have a website or a POBox to send goodies to ?

[@LockNoob]

Another great video that will be super helpful for New pickers. :-)

[@HelpfulLockPicker]

Thank you for the kind words!

[@chriscapune7873]

Great info as always!!! Very nice video! 👍👍👍

[@HelpfulLockPicker]

Thank you for the kind words! I hope to get back into my series soon. These videos take a very long time to make but they are worth it. I really enjoy doing them.

[@gogzog]

But what does the key pins in the core look like? Are they gone?

[@eaglesnest942]

Thanks for the info and technique!

[@HelpfulLockPicker]

Thank you for the kind words. I hope this video helps. If you haven't already, I recommend you check out my full Lock Picking Home School series, it has a lot of great info. Lock Picking Home School: kzbin.info/www/bejne/oZ2ona1oaqime5Y

[@lockmania-locks]

Great info my friend, just went trough it a little quickly but very nice 😄

[@HelpfulLockPicker]

Thank you for the kind words! I hope it helps 😀

[@lockmania-locks]

@@HelpfulLockPicker it dose My Friend

[@SlotenmakerLoyaal]

Very nice video, great job!

[@HelpfulLockPicker]

Thank you for the kind words!

[@SlotenmakerLoyaal]

@@HelpfulLockPicker I'm a Dutch employe locksmith for 8 years now, and reseigned my job today, i am going to try to become my own boss.

[@TomiBorchert]

how to identify standard pin that needs to be set multiple times?

[@paddlefaster]

Great video. I've been struggling with a sparrow practice lock. It's all spools and I can't get any of them to bind.

[@HelpfulLockPicker]

One thing I don't like about those is they have the SC1 keyway which I find is a bit tough for someone new. Are you using top of keyway (TOK) or bottom of keyway (BOK) to tension?

[@imangryatnews7858]

Solid information. Thanks!

[@HelpfulLockPicker]

Thank you for the kind words and I am glad it helps!

[@Dutcharmytent]

As a novice I can say with confidence that oversetting pins happens most of the time. I have learnt to back off the tension slightly and then I can hear the offending pin which is over set drop back down. Looking at the key profile helps , that way a deep cut in the key tells me which pin. has the “long travel”.

[@HelpfulLockPicker]

Thank you for sharing

[@choochoochooseyou]

Great vid. You now have a new subscriber.

[@HelpfulLockPicker]

Thank you for the kind words and for subscribing!

[@gantry289]

Well done. A lot of good info.

[@HelpfulLockPicker]

Thank you for the kind words!