when you installed the border, how did you make that and the herringbone connect? Did you glue it down, or was there another way you made sure they would not shift around? I've considered doing something similar here, but I cant figure out how to ensure the border is not loose and creates any gaps in my floor over time.
@mrfantum1 Жыл бұрын
This was a glued in material, not a click floating float.
@jonlambe6530 Жыл бұрын
@@mrfantum1 ahh that makes total sense. Thanks for the response!
@raylim84925 жыл бұрын
Nice video 👍 I'm having someone to come over to my house for herringbone installation in 2 weeks time. That however, no one in here (Malaysia) said Vinyl Herringbone (Interlocking) is possible. How do you join the plank at the near end?
@mrfantum15 жыл бұрын
This is a glue down product. But a locking system.
@smilejesuslovesyou81083 жыл бұрын
@@mrfantum1 so we have vinyl plank herringbone and want to frame it as you guys have with one plank but there are grooves so do we just glue down the outer edge pieces after cutting the other?
@mrfantum13 жыл бұрын
@@smilejesuslovesyou8108 I think I'm understand what you were asking, yes I would glue them down. Use a track saw our a straight edge to cut the plank. Be very careful. I hear them up a bit just to make it a bit easier to cut through.
@smilejesuslovesyou81083 жыл бұрын
@@mrfantum1 ok awesome and what do you use as filler if there are any gaps
@smilejesuslovesyou81083 жыл бұрын
@@mrfantum1 thank you so much
@rrssrr1232 жыл бұрын
That was quick!
@Tigerratcat9 ай бұрын
Why no mitres borders?
@mrfantum19 ай бұрын
It's the way they wanted it
@glynnhamer83775 жыл бұрын
Was it a filler being applied at the end?
@mrfantum15 жыл бұрын
Yes. This was a very light wood grain and the customer was very concerned about seeing any hairline gaps.
@catisme7263 жыл бұрын
I really like the color and type do you have any info on the manufacture? Thanks
@mrfantum13 жыл бұрын
i do believe it has already been discontinued. Sorry
@rosespearls86055 жыл бұрын
Beautiful job! 🙌🏻
@bsbbossy14 жыл бұрын
I'm confused. Is this vinyl plank or ceramic/porcelain tiles? Or am I missing something?
@mrfantum14 жыл бұрын
Vinyl plank
@cherrybearylemondrop2 жыл бұрын
It looks like vinyl tile (glue down) but in a long plank shape - no interlocking.
@JeremyQuintela4 жыл бұрын
Was this peel and stick vinyl planks?
@mrfantum14 жыл бұрын
No, it was a pressure sensitive adhesive.
@tobescraven87893 жыл бұрын
What's the welder for?
@DETmichigan-yy6lf2 жыл бұрын
Welding
@juniorperez84575 жыл бұрын
How did you start?
@mrfantum15 жыл бұрын
I dry for the plank so I know where the tile will end up before I put down the adhesive. Make sure you snap lines at 45 degree to Wall prior to glueing. You can see the lines through the adhesive when it is set.
@sophiegobel49184 жыл бұрын
What's the corded machine for? A heat gun?
@mrfantum14 жыл бұрын
Yes. It was used just to make it easier to cut through the plank.
@zebbjackson55643 жыл бұрын
I saw the fuck up before you fixed it. Was that actually a trick of the trade or just a error?
@dainiusvigraitis42283 жыл бұрын
hi, what size are these planks? thanks
@mrfantum13 жыл бұрын
9x60
@thats0hboy5 жыл бұрын
What flooring is this?
@mrfantum15 жыл бұрын
Lvp. Not sure what brand it was
@ianbeattie98193 жыл бұрын
4 guys on a small job and a welding hot air gun mmm🤔🤭🤭🤭
@FloorsbySouthernboys6 жыл бұрын
You are awesome
@jasona1196 Жыл бұрын
Not centered
@MultiFloormaster5 жыл бұрын
I dont get it. No shoes! No knee pads! How! So unsafe. Floor looks good though.
@mrfantum14 жыл бұрын
not sure how shoes and knee pads have anything to do with safety in a residential home.
@creekyknees5 жыл бұрын
Heat gun 👎
@mrfantum15 жыл бұрын
What's wrong with the heat gun
@creekyknees5 жыл бұрын
@@mrfantum1 everything it's not needed scribe and template, heating leads to problems at a later date.
@mrfantum15 жыл бұрын
@@creekyknees that would only be an issue if you overheated it. the only reason I heat it up is so that it can be cut little bit easier. I use a leister and turn the temperature really low.
@creekyknees5 жыл бұрын
@@mrfantum1 you don't need to heat it at all, I'm not being rude but have you ever been on a training course
@creekyknees5 жыл бұрын
@The Whole World Called Me Hank skip the first minute or so