Is This Sketchy? How the car dolly works + Dart 2JZ Update

[@HertLife]

Go to buyraycon.com/hert for 20-50% off sitewide! Brought to you by Raycon.

[@HertLife]

I can't WAIT for this car to be back in the mix!

[@Barry.ONeill]

I've a light metallic blue Gs300 basically I was inspired by the same white one you were and yours of course 👌💯🤙 would you go blue tint on the windows or chrome? 😅

[@DirtySlapper99]

@HertLife doesn't every shop and alot of the boy's in japan use the same concept. These one's would hold a bloody truck

[@robwigglezz944]

People on the Internet will always talk crap about anything. Obviously those stands are mint. A nice smooth shop floor probably helps a lot

[@HeathenActual500]

Because if someone isn't paying attention and pushed 1 side it could fall. Both ends not being connected is dangerous

[@DrewBiederman]

smooth shop floor is def a must, that tubing being gusseted can probably hold between 12-18k lbs on those stands. unless youre putting f350s on them i dont see an issue

[@joshralph8270]

I would feel a lot better about them if they built 2 beams to connect both stands. I picture 1 stand getting hung up and (given enough momentum) tipping. I'd imagine being there and pushing it - it feels much more sturdy than it looks.

[@Jumany2]

Those stands are bad, just need a wheel to break and to everything else to bent when metal hit with car and weight on the floor... you are writing a nonsense...and yes is dangerous but who cares

[@joshralph8270]

@Jumany2 what you're writing is nonsense. Those are casters and they're rated for far more weight than that car, did you watch the video?

[@headlights-go-up]

2:20 seeing hert's car on those stands with the dudes pushing kinda looks like those movies where the king is carried in his palanquin by his subjects lol.

[@Soulgasm08]

Whoever does the beats is killing it!

[@nick0941]

@@Soulgasm08 Haake. U can hear the producer tags in the song, "haake, let it eat".

[@Barry.ONeill]

"Engineered to Slide" made them stands popular, he is where James Deane got the Idea too. He's a genius 👌🤙💯

[@HertLife]

ETS is the 🐐

[@Barry.ONeill]

​​@@HertLifeYep I agree, he most Certainly is 🎉 You should visit him next time your down under or get him to America for Final bout or lz world tour or something 😊🤙

[@duck2cool]

Remember when this car was suppose to be his daily? Man we have come so far. I can't wait to see what's next for the GS

[@travisstamp7428]

"Simple" build. 😂 I'd hate to see his version of complex

[@MAMotorsports]

I remember seeing Nigel’s but seeing them Roll through a shop like this makes them seem even more practical. 👏🏼

[@RyanFannon-fy1yf]

This is my favorite build bud. Home wrenching. I remember when you put the 2J in at the house. Keep rocking dude.

[@josejimenez2388]

Zero sketch on my side, well built. I really like it.

[@andreandrews571]

As long as you have a good flat smooth floor it’s a great idea. I am surprised there’s no brace between the separate stands👍🤘😜

[@dannggken]

the lift dollys are dope !! wish i had some for home haha

[@c.sachanski]

love the stand idea! You can also store wheels on them if no car is on it.

[@demdudes954]

I was wondering how those cars got up there....DUH makes sense. Brilliant!!!!

[@theyumefactory]

Love this stuff!! The slight fisheye FOV and stabilizing did almost make me nauseous but keep the content coming!!!

[@Turntablist_Mk2]

User error is the only real dangerous part, they could just weld posts next to the castors that are 1/2 to an inch off the ground depending on the bumps/gaps. That way if 1 side folded/gave out it would just be a small drop but falling that whole castor height on a heavy car could be scary. But the idea with some more safety would be solid, I assume they don't connect the 2 halves together with an adjustable middle length to prevent 1 dude doing what 4 should do slowly and carefully lol.

[@Mr.Unacceptable]

I'd add X cross bracing cotter pinned in for when you roll it around. But they seem sturdy to me. I'd worry about lips and quick stops as people get more complacent with them.

[@travisstamp7428]

Those stands are dope! I see them in serialnine videos too. Kevin's IS300/Altezza sat on a set for a while too.

[@santumi2298]

it does LOOK sketchy as hell lmao

[@ChasingPerfection]

Those stands do have a touch of sketch to them. Nothing to connect them to each other. Anything other then a reallly nice shop floor would be a receipe for disaster with employees not playing attention. Those stands are "safe" in the right environment.

[@bluejayfabrications2216]

Id build them slightly differently to be functional in my one man shop The only thing i would suggest for this set is a tie bar down the edges to stop the potential for one castor set to get snaged and possibly rock off the wheel But if used as shown carefully and with multiple people i cant see a problem

[@Scout_Shitbox]

My only concern is the two not being connected is one lift decided to say catch something it could rock and that’s what would be sketchy

[@ThatManDre]

Those stands are a great idea!

[@JustASimpleGuy]

i wanna see more drift homies built break downs i think it be sick to see that not like supper expensive builds all the time but like cool shit no matter how many zip ties and bn bumpers meshed it took to make one

[@Richardpayet-d4b]

Cool brother love the content 👌👌

[@msinfield]

Love the stands. They should sell plans. I’d rock em.

[@crispymayne]

I wanna those stands haha good work

[@slimegreen8268]

THAT BUCCEES SHIRT IS FUCKING 🔥🔥🔥🔥🔥🔥🔥🔥

[@collincurtis5024]

Tamiya snap kit is goated

[@Randy_51_]

Those stands are rad!

[@clintonvanrijsbergen5017]

Dart block for life best block u can own

[@vancity_coaster]

Sweet idea

[@relentlessblvd8404]

Sheeeeshhhhh gold pistons 😮😮😮😮 bruhhh you craycray ❤

[@89bahelion]

with the gussets and overall width of the stands your dealing with more compression force downward then bending force.

[@JamesAnderson-fw5ew]

I personally dont trust the stands but if they work they work🤷

[@FrameBangStang]

Anyone that thought those were sketchy have never seen the photos of the cars in Japan that are sitting on oil drums lmao

[@AlexComeau]

Lots of shops in Europe do the stands. James Deane in Ireland has cars on stands like that too.

[@KSwapTheWorld69]

0:01 Why'd that piston going in and out make my pants tighter? 🤣 Looks good bro!

[@RynoRacing]

Commenting for the algorithm because hert is the king

[@mavr1ck_garage]

Y'all need to look up the engineered to slide KZbin and see his car stands and how he gets the cars up and down

[@Barry.ONeill]

I commented this earlier too he made them popular

[@homemalone282]

Rolling around on the stands was way smoother than if you were just trying to push it on the ground. Its a gangster idea.

[@KamikazeBRockets]

The joys of the casual viewer I guess, looks safe to me.

[@JBNL1972]

Those stands still look sketchy despite their construction! Imagine one one them getting caught on something on the floor and flipping ... that's a lot of weight comign down! I'd feel safer if the two of them were joined by a bar (ideally adjustable/lockable to accomodate for wheel bases, and/or they held the car on the jack points instead of the wheels.

[@Dumplingu]

Simple seat time car stands?

[@eletor]

Looks safe to me, these guys are doing good work

[@407_ryan8]

what did you use to film this, seems very wobbly

[@gregcombs2755]

Those stands do look kinda sketchy but dude has more than 1 set, I would say they work..

[@1jzfc999]

Those stands are sick.

[@Nico-yd8wh]

Yo those racks 4 the cars are lit… if i had hoists id have some them :D

[@captaincouldverc]

The only criticism i have for that lift thing, are the wheels. In my opinion it would be a good idea to get larger diameter wheels. Not for strength, but for less rolling resistance and less prone to get stuck on a stone or Crack/ joint on cement.

[@Jmiksnchz]

The skirts are shredded 😂

[@smoothsounds801]

Damn you got OSHA opps following Hert. That’s crazy!

[@Shiaxz]

I've been dreaming about jzx100 chaser tourer-v for so long but everytime I see a lowered and widebodied gs300 it makes me want to buy one. I wish I was rich so I could support my carcaine but unfortunately I'm not so I'll just get the chaser one day

[@Understeerking]

Top GS

[@scarecrow2275]

1/8 of an inch DOM steel is just as safe as the lift, we've got a similar rack system in our shop, but our don't roll, our lift does.

[@waterlover]

Would be dope if you do a video of measurements and type of steel so I can make me some of those stands asap

[@Vinny520az]

Looks like something they can use for cars in Florida

[@nickisslamin]

If james deane can do it they can do it

[@nismox6460]

Intelligent idea

[@xRaptorScreamx]

So this wasnt a build breakdown, because the build is already broken down :D Sweet and sour sauce for the pistons

[@REALSHYT666]

How come there's still no content for Nappyboy automotive??? We seen the heist video Tpain is working on but man we all been waiting a Looong time since the announcement of you working for em.

[@HertLife]

Because it’s not done yet.

[@DaleDayTheBigDayDJ]

@dirtheadDave you could buy more cars with some of these

[@cavemanken7029]

Hert. The new profile pic is hands down better. This might sound stupid but I would miss your videos because I didn't recognize your thumbnail.

[@jdguillot8647]

Those poor side skrrrts!! :D

[@ForOdin]

That PC looks sick! What case is that? I need to upgrade mine

[@NeverLetOff]

Yes!!!!!!

[@chrisvlogz6206]

Quite the thumbnail

[@Killa_b_rc]

Ngl…it does look sketch af but it’s good. Imagine if the stands were remote control 🤔

[@OriginalMomo]

It does look a little sketchy, But, as the saying goes… “it ain’t stupid if it works “….

[@uber_stuber]

Regardless of the stand strength, what happens when one end of the car rolls off the stand? The car should never rest on its wheels

[@HertLife]

Maybe I should’ve gave a closer look but in some parts you can see the wheels are recessed and can’t just roll.

[@christrillas9942]

Is this a front sump or rear sump 2j? If it's front sump, do you run a baffle kit in the oil pan?

[@turbogears900]

What is your wheel spec

[@YTias]

i wish someone would hold me like those dollies do :'(

[@heffe17]

People don’t like the stands but will trust foam race ramps.

[@SmokyoDrift]

Big bro

[@stonerspeeder16]

They should get that patented before someone steals the idea

[@MrNamesjeff17291]

How close was ur roof on that lift lol jezz

[@deathwya5534]

GTE block has oil squirters GE blocks don’t that’s the only difference between the blocks, same crank. Toyota didn’t make it easy to convert tho

[@moedog5087]

The raycons sound great but the update sucks imo. I miss the push buttons. The touch pads are so finicky

[@nismox6460]

Make the patent quick

[@DannyNL-tx9tm]

👍🏻👌🏻💪🏻

[@justkiddin1980]

That has to be the most sketchy thing i’ve seen when it comes to storing and moving cars..I wouldn’t trust those castors…But apparently it works, until it doesn’t..

[@Dead-Dog-Rising]

🌵🍕❤

[@AvS88228]

Tracklist plz :)

[@gavinmosher7362]

Hit a big lip and one of the stands stops..... Spooky

[@795_BingBong]

JD got one in his shop too lol why people talking crap about it lol

[@TNWWDGTFilms]

No hate on the stands at all looks dope, however seeing the plasti gauge on the table during engine assembly is interesting for a shop, but not hating they are getting shit done

[@jonathanf1844]

? AWD for the Cheap 👽Chevy or Honda 800hp daily 0to60 faster than a Tesla too

[@go4747]

The people who think it is sketch are those people who buy sketchy equipment for cheap.

[@TheRealGras]

I don't know its its the Lens or the FPS but this video just feels wonky.

[@TrevorChokey]

Fawk the haters bruh

[@glitchered]

looks a lil sketch. could move a car with 2 people if it had adjustable full length bars at the bottom. the top gonna jiggle a bit but the bottom is framed and you can still access the top with the lift arms. you loose compact storage for a lil bit of more 2-man drop safety. hmm. garage hacks. xtra nice video quality on the engine build. like a preroll to a good p*rn flick. this engine gonna move things. yo... :D

[@MMORPG87]

WTF is dude Tq'in with a 2 foot extension for???? spin the crank till caps are up top and only use a socket no extension Also its not the weight that ppl are worried bout. it that those stands are not connected to each other so they will pivot and sitting under front wheels is easier to pivot. u pushing along and catch a crack/bolt/ ziptie with the front stand its gonna suddenly stop but momentum carries letting the front fall over. If both stands are connected it would have to lift the entire car off the ground to flip. gotta be hella slow and keeping an eye on floor debris 100% of the time.

[@leroysaint3004]

Engineers developed air filled rubber to hold your car up and y'all are worried about steel? What do I know? Which is sketchier?

[@leroysaint3004]

Is it the height?

[@MMORPG87]

cause if something catches a caster or corner of the lift 1 rack will stop but the other is still carrying momentum which leads to tipping over. if both racks are linked together the stopping force its applied to both equally at the same time and cant flip over. imagine taking 2 office chairs and sitting in 1 and putting ur feet in the other. have 1 person pull 1 chair and someone else push the other. If guy in back suddenly stops you keep going and ur feet hit the floor. but if the chairs was locked together and same thing happened, everyone would stop in place and ur butt and feet would still be in each seat

[@forty2degree]

Those stands are sick.