Rebuilding a 2JZ to See Why It's So Good

[@djbeatz87]

Please PLEASE do more videos with Zack and Jeremiah nerding out with their engineering backgrounds. I loved this!

[@mattaomartinez.9817]

give these men a raise before they make they're own channel.

[@98KingQuad]

What are their backgrounds?

[@micahsilverman5284]

​@@98KingQuad Zach Jobe has an AA in automotive science. Jeremiah got a bachelor's and master's degree in engineering from UF.

[@justiceofskitzerland6429]

This is true

[@tylerc161]

This

[@Bhelbee]

Now put it in the miata

[@Iambestforreal]

✋everyone

[@arceyes]

@@Iambestforreal Evvvvreyone!! (Gary Oldman in The Professional voice)

[@nutz141]

🤯

[@subiseth]

Yes

[@yourl0st71]

🙏🙏

[@dirtyeggo]

The editors at donut have really outdone themselves Zach and Jeremiah look super realistic

[@maxmucha8207]

Real

[@satan2084]

Real

[@bluecomet8416]

RB26 next I hope

[@mfsusanoo7238]

Yuh real

[@DroneStrike1776]

I hope so, unless they're CGI the entire time.

[@JoeWitAFro]

@13:44 if anyone is doing this with ARP head studs, make sure to coat both sides of the washer and drop it down into the head before you install it onto the studs; you cannot do it the other way around. @20:49 those two allen bolts are for the first VVT-I selenoid cam cap under the valve cover. Pull off the intake valve cover and you'll see the two little bolts to help seal the back of the cam cap.

[@spudman1734]

Thank you for sharing your knowledge

[@justicedemocrat9357]

So...uhh...is it important?

[@JoeWitAFro]

@@justicedemocrat9357 Headgames motorsports told me they often break; and they have seen no issues running without them. But i think toyota designed it to help sealing, which is why everyone says to FIPG the corners under the caps to help mitigate oil seepage. Not hugely important no; but easy to put back in if your ears are still there.

[@HalloweenCrazyzombieyardcom]

Thank you for taking the time to explain this. I am building one myself and was very curious

[@FlyingWalrus100]

Zack and Jeremiah in a 2JZ video is the perfect combination we didnt know we needed.

[@MikeDion94]

A perfect balance of entertainment and education if I say so myself.

[@sashoxxx]

But being a 2JZ, that would mean... TWO Jeremiahs and a Zack. Sounds funky 🤠

[@titansquare5546]

Gnujun vhhukv

[@jamescresswell1532]

I’m thinking Zach’s Silvia needs some channel time and would benefit heavily from a 2JZ!

[@wolfman8666]

Zach said in the broken cars video that he has another rb25 ready to drop in that car tho

[@atlegangletsoge6165]

Thats what i think too😮‍💨🥳

[@drewski5730]

It’s already got an RB, this engine needs a new project.

[@CB-gg1sg]

I wouldn’t be surprised seen as it doesn’t have an engine and they fit in pretty nice

[@samwell_6977]

I think they’ve done a few more videos with it and James’ ae86 on the Donut Underground videos

[@andycress]

The compositing job on this is excellent, it almost looks like Zach and Jeremiah really are two different people.

[@xm8553]

As someone who loves cars but doesn’t work on them, and doesn’t have first hand experience working on them. I think You guys should do more videos like this where go over cart parts, how they work, how to assemble/disassemble etc. there’s a million KZbin videos out there that do this already, but Donut is the best and way funnier!

[@MrAwesome7123]

i agree with this entirely, love cars, but as a teenager without a drivers liscense or money i cant do much with project cars, so gotta watch others do it, same thing i do with computers (which i can kinda do now) i am the pc guy o my friend group lol, just watching hundreds of ltt videos all day

[@anthonyd5027]

If you want to learn how to actually work on cars this channel is not it I love donut but others can teach you what you want better what kinda cars do you like I can give you channels

[@carguygriff9416]

Please please please put it in a Tacoma XRunner!!!

[@ItsNeverMe]

​@@MrAwesome7123 Sounds like me lol 😂 Build my first pc from scratch a year ago (fx-6350 and gtx 660) , now I have an i7-6850k and a gtx 1080. But sadly no room for a car, no money and no drivers licence yet.

[@MrAwesome7123]

@@ItsNeverMe nice, i started out with an fx 6300 and an amd r7 240, nowadays i have a gtx 1080 and an i7 10700

[@hydrolink5297]

I swear, Zack and Jeremiah together is the best combination youtube has ever seen!

[@Bussdownbandit]

Why dont u marry them

[@hairyneil]

@@Bussdownbandit Be better if they married each other

[@entrusted_failure7377]

❤🎉 these two make this channel, essentially the oil pump

[@toeleg]

@@hairyneil 😂😂😂

[@MrTehNoms]

This is the closest we'll get to more science garage. I need more of this. Bart may not be coming back, but you guys are doing it big

[@Robb03]

is there a reason for that? I always wondered why science garage stopped, I assumed it was because they covered most of the basics.

[@MrTehNoms]

@@Robb03 Maybe 'cause Bart left. He had life stuff going on I think

[@certom1988]

You've unlocked a memory, we all loved Bart so much!

[@sooperburrito]

​@@certom1988 I was just thinking of how I missed Bart like 2 days ago lol

[@DroneStrike1776]

@@Robb03 Supposedly he had a baby so family life came knocking. I'm guessing Donut wasn't as big as it is now and probably paychecks were a little smaller. He works for MotorTrend now.

[@ThatDudeinBlue]

Whenever working on any car ever: "it's only about two more seconds and we are done" Fast forward to 2:00AM.

[@andrewfreund5693]

How is this comment so underrated? 😂

[@DeathStalkerAlpha]

this triggered my PTSD of so many mods and projects

[@evoxmania]

or 2 years later.....🤣😂🤣😂🤣😂

[@vitoinostroza5885]

Ah yes, the good ol' "it should be quick"

[@I_eat_boxes]

Jokes on you I started working on my car 2 seconds before 2AM

[@BobNewhope]

4:32: "Speaking of squirters" LOLOLOL You can see Jeremiah's holding back a laugh with all his might. XD

[@kazzaAB]

this is what we needed. Visually educating videos like from before. love this

[@razor_darkhorse]

You guys are amazing. You should do more episodes in dissecting engines why they are good as swaps and why they're reliable and make power easily.

[@MJK-GC]

It's nice to see more technical content alongside the purely entertainment video, I like the balance and keeps me coming back

[@TeIegram-Donut5.]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁!!

[@FilosophicalPharmer]

Agreed. Only became a fan this past year and would love to see more engine tear downs! 👍🏼

[@MJK-GC]

@@FilosophicalPharmer Yeah to see a tear down of the RB25 that zach has would be really interesting as well as some other rarer engines or truck/jeep engines

[@FilosophicalPharmer]

@@MJK-GC Never gotta chance to spend much time turning wrenches growing up. Got old somewhere during my lifetime. Admire people who are capable of this. Always have. I especially admire people who are able to make something better (ie. more hrrsprrs! 😂) than when it came out of factory.

[@Onewheelordeal]

There's a YT channel called I Do Cars if y'all want hundreds of videos like this just in reverse

[@mas13ish1]

I love that you explained so much about this engine. I was just very confused from a mechanical standpoint why you didn't rebuild it while you had it apart. All that labor just to show us the amazing guts of a 2JZ. Thank you for doing the labor so we don't have to.

[@dunteman_racing]

This is the kind of content I've been waiting for! Longer form, more detail. Please start a series from this; tearing down and evaluating legendary engines.

[@taariqsaffouri]

s54 teardown next would be so sick! or a k-series but those teardowns are all over yt (not that jz teardowns aren't lol)

[@tcmr5775]

Please more videos like this one! I love getting to see all the quirks and oddities of different engines, why they were designed the way they were, and what makes them special for their use cases.

[@kiddsupreme]

Imma need about.... 50 more episodes just like this Donut! 🙌

[@samhodde]

Would love to see more engine builds with Zach and Jeremiah

[@TheDodsons]

It's insane how camera quality and angles improve whenever someone is filming a mk4

[@bluemanzach8794]

The editing skills to make the one person seem like two so seamlessly is crazy. Good job 👏

[@nF_Rhythm]

It'd be really cool to see a teardown/comparison between gas vs diesel engines!

[@Machinecheckco]

VW 1.8T TDI

[@boywhohasl1vedhascometodie469]

@@Machinecheckco *1.9 They also made 2.0L too that rock when you put some power to it.

[@boywhohasl1vedhascometodie469]

Definitely, or they should get their hands onto a 1HD-FTE engine! Its basically the diesel version of the 2JZ-GTE

[@benjaminnoordam7707]

​@@boywhohasl1vedhascometodie469 except for that whole oil pump failure demoing the engine

[@benjaminnoordam7707]

You basically have it there. The 2jz was build like a diesel running gas

[@shanelee43]

I think this is one of your best videos yet, I've been a fan since you guys were in the garage attached to the house, I think even before jobe came to the scene as a mechanic. You guys have done an amazing job, I'm proud I've been with you through your journey. And I'll see it through to the end

[@alialugaili1331]

Great video The two bolts that you guys have extra are for the number one cam cap on the intake Side

[@waseemparker5622]

Came to comment this 😅 I missed those 2 bolts also put them in after I found where it goes

[@pickelteets]

I love watching 2 brothers work together like this.

[@Jszul2318]

r they real brothers?

[@pickelteets]

@@Jszul2318 twins

[@jacobbrandenburg9584]

They better keep making these videos. An RB episode would be rad. Or maybe a VR6 to make James happy.

[@elvis1745]

audi 5 cyl

[@googolplex2789]

VR6 is best 6.

[@volvoproblems3567]

Volvo B204GT

[@tobinrichardson1468]

Would love to see more of this type of content. Could we see an LS next?

[@jsaleen17]

Will never happen. Don't want to expose the horrible block that is the LS engines.

[@Daddy._Life]

They put an LS in a 350z I think

[@RiptideAutomotive]

​@@jsaleen17 what makes you say that? Bad personal experience?

[@ttvCaptainJack]

You should do an LS teardown and see why its the most reliable, and the most common engine swap! Also, please put the 2JZ in the Silvia. It has no cons! It will fit well, It is a video that would do well, we would all love to see it, and then zack gets his car fixed!

[@duomaxwell5807]

I think thats what up Joe's sleave....dont trust those blue eyes

[@Mousyy]

I second all of this. 🤚

[@LewisGTR1997]

I also agree! Definitely about time Zack got his Silvia back! But also rebuild the RB!

[@jonathanolien6414]

Put the 2j in the Silvia do a tear down of the rb rebuild the engine them switch the engines

[@TGerhardt]

I think the LS, RB26 and the K20 would all be amazing for this series

[@OfficialMatthewVC]

A tear down of a Coyote engine would be amazing. I haven't seen a proper one done anywhere and would love to learn more about it!

[@jonathansmith7306]

"I do cars" did a coyote, I believe

[@johnathanedwards9054]

​@Jonathan Smith your right he did. The only difference is the one he pulled apart was artificially hydro-locked.😂😢

[@jamartin005]

Coyblowstee

[@D0PEFRESHGAMING]

Real street performance has good videos on one

[@winkletsdad]

Absolutely more of this type of thing! Especially with Zach and Jeremiah. Charming hosts. Informative and entertaining. Love it.

[@BMXAndy1994]

Stock cranks have seen 1500whp multiple time. Love how they put the head studs in block before installing the head. And then skipped to cams. Cuz they had to pull them back off to be able to fit washers in head

[@PianoSkillBoy]

I like the slightly more technical videos, they keep the production quality high and keep it entertaining and informative. More engine teardowns!

[@oull]

right? i love this

[@kojenski]

A while back at a local car meet, I watched a high school team of mechanics fully disassemble and reassemble a 427 in... 20 minutes, or somewhere around that. Absolutely insane to watch since they had exact coordination, didn't see a single fault while they worked.

[@desire_002]

Impressive. Pit crews in motorsport can rebuild motors in similar speeds probably faster it's insane to watch

[@bearymos4805]

Yes, hot rodders of tomorrow engine team! I'm part of that, and as of right now if my team ran a 20 my coach would yell at us! Last year first place nationals walked away averaging around 16:50 I think? recently in practice we average 17 minutes but we're hoping to get closer to 16, and hopefully below 16 (between 15:30-16:00) before state comp. We're slow right now as we haven't been practicing much but after a bit 16's become our average that if we run a 17 we're mad about it. sorry for long response, just weird to see something about my competition in the wild lmao.

[@boywhohasl1vedhascometodie469]

@@bearymos4805 Man, how do I join? I wanna keep the raccoon under the hood tradition alive as well!

[@edward1927]

​@@bearymos4805 just watched a competition. That's awesome to see kids so into cars. Keep up the good work. I'm a pro mechanic and you guys are way faster than me or anyone I work with!

[@Jallu555]

Probably practised so much beforehand. Still would not give my car to a mechanic who is younger than 40.

[@uwublue_]

More engine teardowns! I love seeing how things work and why they're made the way they are. Jobe and Burton are the dynamic duo!

[@mfsusanoo7238]

This needs more likes

[@BarryKendo]

I would love to see an episode: Rebuilding a 4G63T to See Why It's So Good 6 bolt rebuild vs 7 bolt rebuild to get all the Mitsubishi and DSM owner's eyes to bulge! This episode was lovely! I learned a lot about the 2JZ-GTE and can't wait for more, keep up the awesome work Donut and gang!

[@YouCallThataKnife253]

Jeremiah: has an engineering degree Also Jeremiah: can't do simple subtraction

[@PaulMcElligott]

Helpless without his slide rule.

[@wr1ght939]

Me too Jeremiah. Me too.

[@BigFatCone]

@@wr1ght939I don't have any degrees, but the knowledge and in some cases experience for sevaral. I also struggle with basic math.

[@Felix-kd8tn]

Thats what a calculator is for

[@ENCAGED79]

Not much different from most engineers I’ve encountered

[@GGAliceCS]

Always heartwarming to see some father-son bonding ❤️

[@grasstypegabe3]

this is super sick. love seeing jear bear and zach together and these engine breakdowns are also dope. this would make a dope series tearing down commonly used motors. k24, rb motors, sr20, k20, m50, etc!

[@anydaynow01]

The RB would be great, especially if they show how it evolved over the decade or so it was made. Hands down the best sounding one when turning at full tilt!

[@jinglemyberries866]

its all in the block. The quality and hardness of the casting material, the consistency of the castings, the siamese bores, the bore thickness from ~5,5mm at the bottom up to 8+mm towards the top (compare that to a "good" RB30 block which would be around 4,5mm at the top of the bore), ~10mm deck thickness (RB30 is around 8mm), 11 oil return holes at 15.5mm wide (RB30 has 5 return holes at 8mm).

[@joshuapietersen5677]

Thank you for bringing this type of episodes back

[@Movic__]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁!!

[@thesuperolly]

Tear downs are great. I think it would be cool to do a EJ22 if you can get one. Also maybe a comparison side-by-side tear down of a Honda K and B series might be interesting.

[@googolplex2789]

I have an EJ22 for free pickup to an enthusiast. The ‘91 Legacy Wagon must go with it. Center USA.

[@ryleecochenour6013]

@@googolplex2789 how can one contact you????

[@CheechElMexicano]

​@@googolplex2789 I'm in the USA somewhere east 😂

[@SpaceMissile]

That feeling when an engine fires up for the first time and the whole garage cheers... _never gets old!_

[@danielmcgarry8052]

That was great! Do a 13b teardown next! Don't be afraid of the rotary... The challenge will be great for the camera.

[@KillerToefu]

The GE has alot more in common with the GTE than most people think. It's just ALOT easier to swap instead of modifying. Which is probably why the prices of GE's have increased as well.

[@Movic__]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁!!!

[@sameerulhaq9928]

Aren't the Non VVT-i GTE and GE the same internally? It's the VVT-i ones that are different.

[@bigjdm5460]

@@sameerulhaq9928yep, pistons are still different tho. I believe the GE non VVTI pistons are higher compression and doesn’t have oil squirrels. Funny how it’s still a bit different.

[@bean_au371]

Jobe and Jerry are as good a combo as James and the Monolist

[@josephdeburro3078]

This was my favorite Donut video I've seen in a while. Great job y'all

[@TeIegram-Donut5.]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁…

[@jacobdduncan]

Gotta say, the videos with Jerry and Jobey are my favorite. I love all you guys, but I enjoy the way they interact and explain things.

[@gustavov7367]

Zach and Jeremiah are awesome and seems like they get along very well. They really look like good friends

[@skythundersky1544]

Yes! Please more of this, this was awesome!

[@intssmits7860]

I don't know if it's important or not, but... I remember a video, when James mentioned the gentlemen's agreement and those 276 hp. He also said that it's kind of a weird number. But a lot of companies measure power in KW (kilowatts). And knowing that 276 hp = 200 kw (depends on numbers used, when calculating), those 276 hp don't seem that strange anymore. The gentlemen just agreed to 200 kw.

[@Movic__]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁!!!

[@saigonrider]

More precisely 206kw. The speed is also limited to 180km/h

[@daimonmt]

I removed the k in mine, it does 180 m/h now 😂

[@ぢょんすみす-t7b]

At that time, Japanese car manufacturers measured their engine's horsepower in german style, ps. And in that way, the horsepower number is exactly 280 ps. Still odd, but makes more sense than 276 hp, right?

[@dislocatedshoulder7986]

All these videos done with the two of them are proof of hidden gold

[@tennysonjames2969]

Now THIS is the content I subscribe to Donut for!!! Never stop you guys. I truly feel like I learned a lot. Keep up the excellent work. Next up: 2JZ money pit Miata.. Maybe? Come on, You know we all want to see it Jobey

[@G_Ozare]

Haha this was EPIC. Man, I remember watching Zach when he was working on the Miata on his driveway. ❤

[@cocoabutterjohnny8182]

Those are my favorite videos on Donut! Zach is the best host hands down.

[@taylon5200]

This is the stuff that had me clicking every video, glad to see y'all back at it again! Felt like a weird 3-4 months of videos lol.

[@electricpaisy6045]

Looks like you two have so much fun together building that thing. I envy you.

[@sieve5]

This is a great format for future videos! Tearing down engines to figure out why they're good.

[@Mapcuber]

Still can't believe how nice and smooth a 2jz is to drive , I picked up an Aristo recently and i'm so glad I got it over my other options. So fun to drive just part of me feels bad putting ks on it but im hoping to make it last a long time

[@sharkshatericer]

I have a 93 aristo with make 39k miles on it, love the smoothness of it. Have a Mines Ecu in mine

[@izzy031096]

Yes another Aristo fan! I’m having to sell my 2jzgte aristo here in New Zealand 😢

[@lukegarrison545]

jerry and jobe doing mechanic stuff are always the best vids, now put it in the miata

[@APackOfNinjas]

These 2 guys are good together, they should start their own channel 😂

[@tylerward9277]

DO A 13B!!!!!!! The rotary engine deserves to be more understood/known by the general public

[@A_Stereotypical_Heretic]

I wouldn't say this engine is the most legendary engine...but it is a legend

[@TheLouisianan]

Most legendary is probably the V8 Northstar for how many profane words it invented

[@ihatefsi]

@@TheLouisianan Bro forgot the Triton existed💀

[@danr8194]

@@ihatefsi RENESIS rotory engine enters the chat.....

[@AlexSantos-ex7ks]

I've learned more about cars in 6 months since subscribing than I have my entire life. This content is amazing!

[@kevins9242]

These two Donut guys have the best chemistry and the same style of humor. I really enjoy watching their episodes!

[@imSantiiago]

I love the morning uploads! What a great way to start my day 💪💪

[@osamakheireddine9493]

Their bromance over the last few months seems to be getting better and better 😂❤

[@bradnoyes7955]

15:30 Uhh, That's wrong, crank to cam would be 2:1 for a 4 stroke engine; 2 Crank revolutions for 1 cam rev.

[@King_Jamo430]

i had no idea how advanced the 2jz is thanks for making such a digestible and fun video

[@craz8rulzgg]

You could do another hi-low series with two 2JZs after figuring out a car that could be a sleeper that has it, like an old toyota chaser or something! Just an idea but keep up the great work you guys!

[@BuffMyRadius]

The high car is just a Supra they bought, and the low car is a IS300 they heavily modify 😂

[@JacobCarlson]

Those extra bolts look *awfully* similar to the ones pictures at 22:27... just saying

[@jrbudoybudoy]

Zach and Jeremiah! My favorite tandem!

[@ryanleone3007]

The quality of these videos, the editing, the shooting, everything, is so professional and well done.

[@malthehansen7915]

Keep the technical content coming! Loving the switch back!

[@CesarMartinez-nu3if]

Wow this engine is amazing, my question is, as small as something can be, you can always make the most out of it, so I wonder why other companies didn’t focus on this kind of efficiency and durability when making engines, or just any kind of cars, the engineering and thought behind it is so well planned

[@Flyingsquirrel69420]

More engine teardowns, please!

[@salt-emoji]

That shot with the supra, with the airplane in the background was sick.

[@ChrissiX]

This is the kinda video you have to watch over and over for it to transition from entertainment to information. :) Love it ...... MORE OF THESE.

[@GGSE21]

LET'S GOOOOOO BABY,2JZ!!!!❤️‍🔥🔥🔥🥵

[@TheMiguelGarciaShow]

I’ve learned more about engines in this one video than I knew my whole life … 🤯

[@derpaderp6642]

Dude?

[@ClarenceSearles]

Gen 2 LT1 rebuild. Late model C4 corvettes are cheap fun, but not everyone can afford an LS swap right away. A fresh one with 300hp can spin tires just fine. Great cheap project cars.

[@dylandonahoe9115]

Would love to see a rebuild of a vq35de. That’d be pretty sweet

[@NG-VQ37VHR]

That'd be neat. I've got one in my driveway that I just sealed back up. I'm going through the headache of trying to get all the air out of that horribly designed cooling system now.

[@zipper761882]

This is one of the coolest videos you guys have done. Don't get me wrong I love the whacky stuff too! Just saying I wouldn't mind seeing more videos like this one!

[@morgancole2663]

I think it'd be cool to do an engine build on one which is very efficient, seeing how it achieves it like this it's power

[@nicholasmorris3709]

If those are hex head bolts those 2, they either go on the lower-end cover that goes over the oil pump and crank or it goes to one of the two upper plastic guards for the variable valve timing the timing belt covers.

[@hemlatanegi2106]

Donut gettin' consistent again🎉🎉🎉❤

[@TeIegram-Donut5.]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁!!

[@Alex.04928]

Can't wait to see what this goes in! Also, how long will it run before we find out where those two bolts were supposed to go? 😂

[@randomguyjustpassingby]

Love how those guys were ready to make bets that it wouldn't start. Guess who was wrong, huh JZ is for Jeremiah+Zach. Your duo is brilliant, keep it up 🔥

[@7shdwz22]

Just saw your 2j teardown and rebuild. Absolutely awesome please do more engines and i would be ok with a longer version very enjoyable. Thanks guys and as always good job 👏🏽

[@thehomelessproject3784]

Next we need the rb and a comparison please 🙏 😊

[@izzy031096]

2jz is far stronger. One of the Aussie channels (might have been Motive Video) did sonic testing on the block thickness and a whole heap of other tests. 2jz won nearly every single test.

[@thehomelessproject3784]

@izzy031096 it's a beast what would be good actually is a Ford barra vs a 2j and then a BMW B58

[@izzy031096]

@@thehomelessproject3784 100% a far better comparison (despite the extra litre of displacement). That’s what makes the barra and intech so good, all that torque!!

[@thehomelessproject3784]

@@izzy031096 Hopefully they see these messages 🤣🤣

[@user-kr1or1hm4v]

Bring up to speed back!

[@TeIegram-Donut5.]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁

[@jordanpayne6042]

Love these rebuild videos, I feel like I learn a lot every time. You should do a rebuild of the 13B-REW from the FD3S!

[@prestonfritz4759]

Great stuff as always!!

[@Donuts_random_stuff]

How do you know if you can’t possibly have watched

[@Flashbang_Photo]

I'm pretty much a "jdm boi" but there's no way in hell i'm dropping 10k on that hunk of iron, the attractive of the jz engines is the "cheap" power we can get out of them, 10k puts you into a b58 powertrain like the mk5 supra, which has already been proven for 1000hp as well lol

[@tfhssn]

Then you have no taste

[@TeIegram-Donut5.]

TEXT THE ABOVE USERNAME TO CLAIM YOUR GIFT 🎁!!!!

[@Flashbang_Photo]

@@tfhssn I have taste, i like the 2jz but the appeal of that engine has never been dropping 10k just to buy one. A B58 here is 4500€, a 2JZ could be bought for about 2-4000€ prepandemic, so yeah, it's not about taste it's about using a cheaper and lighter engine for cheaper that will still last and spending the difference on better cooling, suspension and transmission.

[@ThatOneKiidThere]

You're more of a money guy then a car guy I see lol

[@Exiovus]

2jz in bmw drift car

[@josimarruiz2]

K24 v 2JZ showdown... the suspense is killing me!

[@ivanz2709]

Use me as the Jobe “robust” button

[@Tr-fj4hr]

I’m trying to learn more about how combustion engines work and this videos is amazingly informative and easy to follow along for a beginner

[@2009FordCrownVic]

4 reasons why the engine is so good: 1.) StUuuUuUUuUuUuu 2.) 6 Cylinder 3.) RAAaAa STUUUuUUuuUUu 4.) Reliability

[@user-245er4ud]

Zach and Jeremiah have hilarious chemistry, like Oirrl and water! They get into a tiny fight 12:13 And then they make up 14:16 but start up again 14:49

[@aurasky24]

TEAR APART MORE ENGINES!!! PLEASE!!! I'm a Civil Engineer but I love all aspects of engineering and if it wasn't for how vehicles are built I would not be building be structures. Tear apart more engines and rebuild them its sooooooo Fun to see you guys do it. I Cheered when she fired up. J & Z .... You guys are a great fucking duo for this.