High and Low Voltage Protection for your Home - Cost Effective Solution

[@michaelr939]

Is this unit available on the US market i.e. 110V?

[@rtechreviews]

There should be similar devices for 110volts yes... Just look up whole home voltage protector in your Amazon site

[@sidnext2none]

Very useful review.. thanks

[@Impakzy]

Great! Thank you for using English.

[@jocs21]

Does this device protect appliances especially in our area where electricity current are like christmas light always on and off leading to the destruction of our appliances..

[@rtechreviews]

Yes it can possibly do that.. since it had a delay on power up

[@agjacob]

Useful guidance for a common problem. But except for the introductory section, the background music volume was very distracting and made your instructions very hard to follow. Less is more.

[@rtechreviews]

Feedback noted thank you

[@fmsrworkshop1384]

Hi. How is the experience after 9 months? does it work well? accurate? I have ordered a three-phase one after watching your video.

[@rtechreviews]

It stopped working 🥲

[@tadnyarahul2854]

@@rtechreviews I almost made my mind to order one but then I see your comment here ...So do you find any other good working alternative? Actually, I have very expensive gadgets in my gaming room and sometime my PC also automatically turned off and I think it's because of some voltage fluctuation so I need something which can protect it

[@jfbaro2]

Is there any similar device that would not CUT OFF power, but instead discard the extra voltage or complement the missing voltage (using super capacitors) for the seconds that the grid has variation over 10V - 20V?

[@rtechreviews]

Nope... At this price this works... If you want those additional features your gonna have to get a servo stabilizer

[@beshamshew4236]

@@rtechreviews what amt of apms does it protect?

[@sajurajendraprasad3021]

Sir i wanted to purchase a plug that we see in amazon which says u have under /over voltage and surge protection as i am traveling for my laptop. Are these devices ideal for the purpose. Willt they protect my laptop or any device from also neutral voltages. Also the device u have presented in this video, will it also protect my house equipment from neutral voltages. Pls reply.

[@rtechreviews]

The device in video will protect your house from high and low voltages and that's about it for surge you need or can try amzn.to/3RVfhRZ

[@pemirat]

@@rtechreviews For a lightning strike, there has to be somewhere for the current to go. Like a stake running into the ground. This being practical depends on the voltage it can shunt. How helpful is it? Is there a more affordable option?

[@VivekGupta-sh3lj]

Hi. Great review. I would also like to suggest Sollatek AVS30. I use it in my home. The sollatek not only senses low and high voltage but also irregularity in current. Meaning to say it ensures that the appliances are getting conditioned AC power

[@rtechreviews]

Thanks Vivek! Do you deal with the device you mentioned please... do let me know, Thanks 😊

[@VivekGupta-sh3lj]

@@rtechreviews hi. I just have been a user of that device for nearly 5 years. In addition, i was also using their AC guard . So many times ut has happened that voltage dipped or fluctuated and the device just cut iff the current, while the main MCB stayed on.

[@GeetaHospital]

I want to know is there any device which would help us provide complete protection to inverter ac pcb or vrv ac pcb or high end expensive electronic device.

[@jeffchannel8402]

Thanks for sharing your knowledge sir.

[@7starji506]

Please share your month experience... It good to buy..

[@rtechreviews]

I'm using it and I think it's a good device to have in general to protect devices from high voltage ⚡

[@spdjsoundbhowridih4384]

Sir 3 faje ki video banaea

[@rauljapay8167]

For guidance sir, how to figure out if my line-to-line supply works with newly purchased taxnele tvps1 40amperes single phase with N-L input. Thanks

[@rtechreviews]

So sorry sir, I think an electrician can be the best guide

[@cashova]

Have this device surge protection?

[@nelsonudeh4473]

Can I use it in a home that uses air conditioner, electric cooker, and pressing iron?

[@rtechreviews]

Yes this can handle 63 Amps... so it's good for a full household

[@al3xnoel]

How to use this in US 240v split phase 😢

[@rtechreviews]

Hi There. I don't think this would work in the US. I'm sure there are plenty of other devices you get there 😊

[@al3xnoel]

@@rtechreviews nah man that the thing 😂 there is not. Like this one. The only available is a surge protector, no a over under voltage protection, or at least i cannot find one. There are many outlets version.

[@indiatechnewscom]

@@al3xnoel here I found similar devices www.amazon.com/s?k=over+voltage+protector&crid=3K0YJY7L3HO13&sprefix=over+vol%2Caps%2C352&ref=nb_sb_ss_ts-doa-p_1_8

[@VikasKumar-cx7vv]

Prices 63A

[@rtechreviews]

Around 1100

[@kevinjames6339]

Do these devices come for higher voltages ?

[@rtechreviews]

Does come for 3 phase

[@kevinjames6339]

@@rtechreviews most home voltages are single phase .

[@kevinjames6339]

Since. The volatages are withing the range 300- 330 could you recommend the proper device to use

[@rtechreviews]

300 to 350... this is just a cut off device for high voltages... who is using 300v ?

[@juanghee]

@@rtechreviews , Most villages in India get raw power sometimes upto 400 volts, during these sudden surges - the borewell pumps burn up . Hence to control these surges i have enquired for a device that would control these surges and maintain the required voltage .

[@salsal1967]

Hello Our electricity is 120V x 3 , which means if we want 220V then we have to connect (2 L's) (L1+L2) or (L2+L3) or (L1+L3). What if I connect three devices like this device to the main cable (L1, L2, L3) (L1) of the main incoming cable to (L) of the 1st device (L2) of the main incoming cable to (L) of the 2nd device (L3) of the main incoming cable to (L) of the 3rd device And connect the (N) of each device to any of the other (L's) just to have the device display and functions work. Will these 3 devices monitor the incoming voltage and current or not? Waiting for your valuable answer.

[@rtechreviews]

You will have to buy the 3 phase unit...

[@shwetanksingh5208]

I wish to use this for 1.5 ton invertor AC with mainline stablizer. Usually stablizer provides voltage in the operational range of AC but sometimes when voltage is critically low, stablizer kind of shed its output voltage below 190 which is least operational range of AC. I want cutoff at 190. Can I use this?

[@rtechreviews]

Yes... this thing has adjustable voltage control... you can set your choice of low or High voltage... :) thank you for the question.. please do subscribe

[@GeetaHospital]

Stabilizer doesn't provide complete protection until and unless you have installed high low voltage cut off device with contactor in it. Stabilizer also have their own limitations . I am still searching for something excellent device which can protect the inverter ac pcb or expensive items. Online Ups of vertiv gives protection for smaller devices but for ac we have to search market.

[@kashinath6756]

Genuine explanation 💯

[@rtechreviews]

Thank you sir please do subscribe 🙏🏻 like and share thanks 😊

[@manas007ism]

I have been one of your first subscriber, I changed my nexon's headlight to Anmingpu based on your recommendation. Just keep rolling man. Regards

[@rtechreviews]

Thank you Manas

[@al3xnoel]

@@rtechreviews how to use this in us 240v split phase? Can 2 one phase 120v be use 🤔 ? In US split phase combined L1, N and L2, N using the same neutral 😐 🤔