High Gloss 2K Clear Over PLASTI DIP!

[@dipyourcar]

Man, who would have guessed? 😁

[@Soundsaboutright42]

😂😂😂

[@Justin-tw8ws]

I thought we been down this road a while ago???

[@fluffy2227]

What if you use some type of dissolve to weaken the clear coat. If not the whole thing so you can just wash it off?🤔

[@aktionnocamera2267]

Clear gloss just hardens like an eggshell... Probably bonded all the way through.....keep proving em wrong fonzy

[@MUNd0215]

But how was it for protection?

[@layurhandsonme]

Legend has it Fonzie is still peeling this rim

[@imranp128]

rooster857 omg you’re so funny.

[@eaglei_trade]

Legend says, only chuck norris can peal that wheel in one go

[@Garbox80]

Chuck Norris wouldn't peel it, the paint would peel itself when Chuck told so.

[@apocalypse487]

It's been a year and he's still peeling it

[@iliveindetroit1]

ha

[@ShadowlordDio]

it is a great way to show us that if you want your plastidip to be durable, apply 2k clearcoat!! i will do it right now. i am tired of plastidip peeling itself after 2 months

[@ThatJerkFromCali]

💯

[@lailafreemansmith3603]

So it usually doesn’t hold up well???👀

[@Jimmy_Jamz]

That sarcasm made me burst out laughing. That’s how you start a video 😂😂 Any OG dipper saw this coming. 💪🏽

[@lepa7570]

I have tested acrylik clear over plasti dip with good gloss result. Then i wiped it with acetone and after that the plasti dip was peelable again.

[@TechWizMaster]

i have just a small wing/duckbill to do for my car and im on primer right now, i plan to do black plasti dip and then clear coat it to hell and back...since itll never get removed anyways. Reason is i like plasti dip the way it fill small imperfections and always give me a consistent finish...it's easier to work than paint that's the main advantage here.

[@Bhicken_Nugget]

The problem is you only did 7 coats. You need to do 38 coats for good peels

[@BxPolymath]

lmao golden

[@roblesinline6642]

Lmaoo

[@thejester6265]

Damn it I lost it man. Lmao

[@roadstar499]

7 coats seems way to much...sounds like a big pain in ass to do.

[@mauricioayala6556]

More like 69

[@batvon39]

So there's not really anything technically wrong with this, considering you paint something for the paint to stay there? I get plastidip is meant to be easily peel-able, but from a consumer perspective...I'd rather save effort in preserving my paint than removing it. If it's gonna last a few years and be easier to take care of, I'm not gonna mind spending some time removing it when the time comes.

[@Darlemonte]

It's been proven that if you apply enough it comes off fine. But I agree with you. If the goal is a paint job then remove it like paint. To each their own is all.

[@Lurker01]

This guy says 2k don’t adhere to plastidip and it can chip off when presure wash.

[@batvon39]

@@Lurker01 so I ended up spraying clear coat on one of my plastidipped wheels shortly after this comment (not 2k clear, a cheap one from autozone) and it was the best preserved of the 4. I changed wheels last year but of the 3 years it was on, it was the only one with no peeling or damage. It was easier to clean too, brake dust would stick to the other 3.

[@lailafreemansmith3603]

@@batvon39thanks for the info! Good to know!

[@aaronjames8547]

then dont

[@kiddmode]

I was debating on whether or not to buy your product but after seeing people doing the 2K gloss over plasti dip and then seeing this video, I will be making an upcoming purchase from your site. Thanks :)

[@AmericanRifleTX]

Ive put 2k clear gloss over my plasti dip I used 2 cans. So far it's been 6 months and I must say it makes it easier to clean also the gloss looks really good. But I must say if you don't spray it on right then youre gonna get some orange peel or areas of overspray and it'll look gritty or somewhat flat. But overall im happy with both products I think the 2k prolongs the life of the plasti dip.

[@fm00078]

I've done this with early version of Peelable Paint with clear coat. Found the removal is just like yours, impossible. BUT when used a propane torch (heat gun is safer) to warm up just enough to soften the clear coat, it peeled easily. TRY IT, YOU'LL LIKE IT.

[@mrpabs5864]

I have been using 2k clear coat over plastidip on my wheels and interior trims for years and I can tell you that this guy didn't put enough coats of plastidip, probably intentionally to prove his point. You do 5-6 wet coats of plastidip and 3 of 2k clear. I can peel that off any day. Yes.. not as fast as only using plastidip but it is totally worth it as the paint will look real nice and very easy to clean, unlike plastidip alone acting like dust magnet. Also, wait no more than 5 minutes between plastidip passes and 10 mins between clear coat, all wet coats... this will make your wheels look wet and smooth like a baby's butt. Just buy a case of paint and practice on something.

[@gtaloony]

Thanks

[@TATTDIS]

Thinking of trying on all chrome wheels on my 04 DeVille just want it to last at least till fall.

[@safeashkar5908]

@@TATTDIS if you’re in Chicago let me know I do wheels, trim, and other things

[@franchisefred4066]

Will this mixture 2k/Plastidip last for years if done correctly as you have experienced and stated?

[@secession77]

No more than 5 minutes in-between plastidip coats or between the passes of a single coat?

[@JohnDrach]

I did this w my kids dirtbike wheels. So durable. If I ever need to reapply I can always sandblast it off

[@Ohjustyoshi]

How else knew Fonzie was going to bamboozle us? I saw this coming from a mile away LOL

[@adammoran7849]

I did this to my bumpers 3yrs ago & they still look amazing.

[@MrC-kz4tz]

Was the gloss shine nice on it with the 2k?

[@franchisefred4066]

I bet it did

[@paulduncan3024]

I appreciate you making this clear, even a little bit troll at the start with your faux optimism haha 🤣🤣🤣🤣

[@MikeHawkHurtz]

“Making this clear” literally haha

[@jorgenlannock]

I did this 2 years ago with yellow dip. Same result as yours. Finally i used highpressure watergun. If you've got some time it will all come off 😁

[@jorgenlannock]

@tmerks ❶ for me it did. European weather. Was a pain to come off though.

[@joshl9295]

This is how it was peeling off super wrap before I went back to plasti dip. You guys are the best and have the best product around

[@dipyourcar]

Thanks for watching!

[@HamzaKhan-rr7rp]

Hahaha, the amount of sarcasm in this video is amazing

[@mikismays3760]

Nice car I’m going to paint my grill black

[@HamzaKhan-rr7rp]

@@mikismays3760 Thanks! I've dipped it shadow red!

[@Rillichefen]

Cool, i just clearcoated my old snowmobile to get som gloss and shine to it, and it turned out great 👍

[@edmasoud2826]

These guys will not recommend other better products so they can sell theirs

[@Itsgabe_]

@@edmasoud2826 We wont recommend something that will leave customers struggling to remove a coating that should not be applied over the dip. We want everything to go back to its original OEM finish without issues or a struggle.

[@lifelongfit5997]

I wouldn't trust anyone's knowledge except for Fonzie..Easy thought man. 👌

[@nathane2243]

Now after seeing this, wouldn't the 2k seem more durable? With just a glossifer, the plasti dip would just come off easily by a simple peel. If it comes off easily, that would make the product less durable? I am looking at plasti dipping my wheels and keeping it that way. The 2k made it difficult to peal since it dries hard. That usually means it's more durable because it holds up better. Rock chips, pressure washer etc...Just need some clarification

[@conniestevenson226]

But remember clear coat is hard and plastidip is not.the hard on top of soft might not work good in all circumstances

[@whocares892]

​@@conniestevenson226yeah, but so are brownies. Burgers. Creme broulee. Toasted marshmallows. Gushers. Armadillos. Turtles. Human beings. You get the gist, short story long, the hard outer shell holds that soft inner substance in place. Wrap the mask around the back if you're worried about adhesion to the metal🤷‍♂️

[@THEVEGASUM]

4:30 easy i can answer that question. The clear coat is not only a gloss shine to it but it's also like kazy glue. Once it hardens its becomes a solid and since you sprayed it over the plasti dip it solidify it as well so now instead of being able to pull it like rubber it's become hardened. Probably dont use it on plasti dip unless you plan on making that dip a for ever color

[@G42J3T]

I think this could still have its practical application, when you have a set of mint chrome finish wheels you can still apply mutiple coats of plastidip and then 2k paint then the wheels are paintable in normal high gloss paint as many colors or coats as you like over time then when done even though it may take you a full day off chipping away to remove you would still have the original unscuffed hi mirror finish

[@MrHowdi]

Im ashamed at how long it look for me to pick up on the sarcasm haha - Dam it Fonzie!!

[@fillername458]

Others have videos of the same thing but openly say that you have to use at least 10 coats of dip in order to make it peel easier later on.

[@ajjohnson5447]

Watching you peel that, has totally blown my high.

[@Christian-cr5oz]

Yo! I was literally about to do this. It's a bummer but I'm glad I watched this to warn me before I did something I would possibly regret.

[@sohotmusic1]

Me too! I have the cans sitting by me as I type 😂. I think I might go ahead and do it because I plan on powder coating them next.

[@mikewithamopar7544]

J. R. Did you end up plasti dipping then using2k gloss?

[@trendingtv6149]

With all that work peeling, you gave your thumbs/fingers just as much of a workout as you did your biceps! 😂😂😂💪💪💪

[@varungarnepudi]

You are so honest, and I respect that

[@captjay5193]

SOOO Glad you made that video. I have two cans of 2K gloss ready to go. Thank you from my my finger nails to my stress level. This simple information demonstrates your corporate honesty and goes a long way for customer retention.....good job. I am a believer in your company.

[@MrLewisTan]

You guys did this video before on a small scale. I remember it did come off but in very small pieces. That's why I was surprised you were doing this vid till your end segment

[@sebastianstarnes4291]

What about using a heat gun or using a power washer once started? Or a heated power washer? I imagine it would loosen some stuff up and make it easier to peel

[@SuperSpreeGaming]

Best way to get plasti dip off is a pressure washer. Took me about an hour to get half of it off by hand and 5 minutes once I gave up and grabbed the pressure washer. I was pretty bummed that the pressure washer worked so well just after I spent forever swearing at my car haha.

[@pizza_killer5610]

Ha, this video did bum me out, but you definitely saved me a lot of hassle. Thanks. Great video.

[@ahmadghosheh3104]

😂😂😂😂. Bait and switch I though we are getting 2K for dip. Love the video. Yeah, I can Peel 2 cars by the time he's done with the wheel. I am sure someone will blame Plastidip for that.

[@marcusaureliusantoninusaug2161]

Thank you for beeing honest and real Fonzie, it's very rare in the B2C world these days! The best solution was and still is Plastidip + the Glossifier If someone wants a permanent solution, get the wheels powdercoated. All the 'bro advice' out there with regards to Plastidip is just as reliable as the bro advice when it comes to nutrition, e.g. 'do low carb and you'll look like a bodybuilder in a year' 😁😁

[@zepp3lin]

Luckily I did my research on KZbin and found your video, I was about to clear coat my plastidip for that glossy look but I had some doubts than found this video even if it's 3 years old, it is still valid. Thanks.

[@3star2nr]

Legend has it hes still peeling to this day...

[@c12performance19]

Phew ....That was close as I had the wheel kit and some 2k spray I use on my cf parts Thank you bud🏅

[@tazzdc1978]

Fonzie...a gentleman and a scholar

[@DSC1320]

Soon as Fonzie said I can't believe I didn't think about that. I knew what was coming. Lol

[@nigelwilliams5276]

Yeah have you seen the size how he's arm's and biceps have grow since then..!!

[@pulhey67]

I didn't exact the same thing about 10 yrs ago and I used a pressure washer with 1800psi to remove it and went off easily.

[@Tyler-qz9uc]

I wish every business was like yours keep up the good work👍🏼

[@robertmartinez696]

My question is y so many people want to apply then remove...apply n leave it there

[@masonheadrick8519]

Facts bro

[@batvon39]

Robert Martinez that's what I'm saying...the point of paint is for it to stay there lol I'm not gonna paint my wheels because it's fun and easy to peel off after

[@prestonhall8209]

@@batvon39 it’s because it’s not paint.

[@batvon39]

@@prestonhall8209 you use it to color the surface. It serves the same purpose

[@DakotaTrucker]

It's basically a liquid wrap.

[@jessefish8273]

Stand up dude right there i hate when people bash dip before doing any research...

[@Stephenspounds]

I am just speechless😱. I LOVE the sattire Fonzie😂😂😂😂

[@mikeygtvi]

OMG You actually saved me, I have just recently bought two of those cans of gloss off Ebay. Not using them now!

[@StephenBrewer89]

Use them for some headlights or something it’s good clear.

[@jennylozoya6053]

Spry with goo b gone ..or asphault remover it turns to gel and wipes

[@agajohanna428]

I'd probably take a soft cloth with some thinners to soften the clear a bit and try peeling whilst it's still damp. Thant might be helpful. I dunno, never tried

[@EvoOfBigAks]

Won't lie... I didn't see that coming at all but I respect the care you have for your customers!!!!!! Thanks for the troll🤣🤣🤣🤣

[@justcruzin7844]

Too late.. i applied this last month to my wheels. GGGGGGGGREAT!!

[@wordlife_97]

Any update?

[@mikewithamopar7544]

Have any pictures?

[@jordanehricmusic]

How’s it working out??

[@coltonstrickland1702]

Most people like my self buy plastidip so we don’t have to do any paint prep😂 I’m all for leaving it on lmao I just don’t wanna sand endlessly

[@smeghead760]

It must stick to the dip ! , it just works against the elasticity , surely it’s a tougher more permanent finish that you can also flat back polish and add more if necessary?

[@mjc1177]

I'm glad I saw this video thanks!

[@ricevw]

Fonzie's sarcasm is growing by the video

[@THEVEGASUM]

The beauty of plasti dip is that you can remove it & change colors at ease without having to sand off a clear coat ..

[@dantedoescars]

Like a few had said with Fonzie’s intro I started to hold back laughing and then lost it when he was narrating the peel. I kept picturing the guy with the fishing rod and the dollar bill “whoop almost had it”!

[@dbblrr]

ohhhhhh my god i used to rolll laughing my ass at that damn dollar bill commercial!!!

[@fortheLOVEofMODsMike]

Awesome. I watched thinking it would confirm my decision to add 2k. This is a reality check. EVERYTHING made sense if it sounds too good to be true, It is. They don't put hard clear coat on the side of your car to protect it from rocks and chips.... they put soft PPF

[@brucewrandol]

Try using a bamboo bar-b-que skewer to lift the dip. I pour acrylic paints and have the similiar problem.

[@austinbryla1282]

I am gonna dip my car and would like it to stay as long as it can. Which clear coat would hold up? I realize its not permanent all together, but I'm trying to fix a paint job without breaking the bank.

[@largon2008]

That's why you have the option to get the matte black or a little of bit of gloss matte black..

[@nathane2243]

Use air craft stripper. It will bubble it all up and come off like butter

[@MrGF1582]

Fonz! Been watchin you for years now, annnnd been using Plasti Dip for years too! Love it! I have 2 questions for you: 1) Should I can I used a heat gun to help Plasti Dip cure faster and more evenly? 2) Can I use a heat gun to help remove Plasti Dip? Please let me know. Thanks!

[@elcompajr664]

I recommend that you paint with permanent paint the plastic dip to the passage of a couple of weeks it begins to lift

[@roadsterguy79]

Lol Fonzie playin’ like he doesn’t know. “Hold on... I’m sure this will work eventually” 🤣

[@lcshotta]

Damn it, I just bought all the black plasti dip at Homedepot, good thing I didn't start yet. Always trust the Fonz

[@Agent77X]

I did 12 coats of plastic dip and 19 coats of 2X gloss coat! Make sure it does not peel!

[@eddycervantea7882]

Sheesh

[@JeepHemiLyfe]

Man has plasti-dip with a little bit of rims for wheels

[@RAM-VIC]

The auto flex gloss is amazing stuff, surprised it wasn’t mentioned

[@Itsgabe_]

its not DIY

[@gs-t5188]

Good video. Sarcasm was on point 😀

[@visionthrulens6623]

can you sell the satin black in a can then? rather spray satin black on wheels over basic matte plasti dip

[@honeybear8485]

no I was thinking about putting the clear coat over thermoplastic bumpers first with plastic dip and then clear coat I wonder how it'll come off..but I really don't want it to come off I wanted the last as long as possible I hate doing things twice 😅

[@TD-il6ju]

I plasti dipped my GLK and someone ripped some of it off in a supermarket parking lot. I was livid but life’s life.

[@TortugaDeRio]

Rumor has it he's still peeling the dip👴🕟

[@philb707]

The trick to it is never peeling it.

[@cristianantolin1396]

That's what I'm saying I think people dont wanna peel it

[@CheekRunner]

Just keep adding layers lol

[@salbedo_daddy6219]

How long does it really last glossy ???

[@nicholasgraham7230]

Exactly I did all my trim gold. And I really wanna do the aftermarket rims gold but I dont want it peeling in a year with just plasti dip.

[@HalfdeadRider]

​@@nicholasgraham7230 Use gold wheel paint then, or use clear coat over the top of plasti dip like in the video for more durability and shine, if you want it peelable still but being a pain in the arse when it comes time to.

[@Delc0]

Thanks for this. Actually saved me from a future headache. Was planning to do anthracite grey on my wheels with 2k gloss clear coat from Spraymax. How about a comparison video between the two? I would have liked to seen that. I feel like the 2k gloss gives off more of shiny/wet surface rather than more of a matte appearance from dyc's glossifier.

[@tobymofield6597]

I changed my oil and filter, and fixed a peanut butter and jelly sandwich during the peeling process.

[@kaylee1883able]

So which plasti dip with gloss do you recommend?

[@59eurobug]

What a great way to make sure your customers don't go buy a 2K clearcoat and stick with DYC products. I like how Fonzie pretended to be optimistic.

[@ShadowlordDio]

it is a great way to show us that if you want your plastidip to be durable, apply 2k clearcoat!! i will do it right now. i am tired of plastidip peeling itslf after 2 months

[@franchisefred4066]

That’s how he makes his 2 cents. Don’t advertise for another company for your own commission 😂

[@lailafreemansmith3603]

So is there a video for a longer term usage… For those of us that don’t plan on peeling off the dip…?

[@odinheadshotz4479]

Life saver man I was just thinking about using the same method and would’ve been screwed I’ll just stick with the regular dip lol

[@enquire422]

I think I will be able to use this stuff on my exposed sash windows that keep on getting destroyed by the rain and bad weather!

[@moneymaker9712]

Once you get the lip peeled down you can use wax and grease remover to soak the peeled area, let it sit for about 5 minutes then pressure wash it off. This would accelerate the peeling time but depends on how strong the pressure washer is.

[@Itsgabe_]

and also how much paint you want left on your wheels or just bare metal..

[@CarsFitnessMoney]

I was hoping you would have talked about autoflex in the video too. We would love a super high gloss finish for our cars

[@361screwhead1]

Would you recommend the 2k gloss for permanent paint. I’m gonna plasti dip all my chrome trim and bumpers to a gloss black and I plan o leaving it that color forever

[@mikeh.8155]

I dipped both my front and rear bumpers white and then shot some regular clear coat paint over it (not 2K)-- just a couple of coats - but it looks good.

[@MoparHollics]

Thanks fonzy finally you cleared this up 👍 I almost did this to my beater I'll stick to metallizer and glossifier!

[@henryberg2155]

Great video. I’m gonna use 2k clear coat on my entire car. Just seeing how difficult it is to peel. I’m gonna 2k clear coat on my entire tesla so it can last years.

[@pattonsplace41477]

Hey Fonzie... Here's a towel... You're dripping with sarcasm!! :D

[@humbertorodriguez7906]

Thanks for doin the foot work man appreciate it, big fan and customer of your product since back in the day 4 years ago

[@lailafreemansmith3603]

Sounds like this is exactly what I will need… if I try this…

[@jayc6841]

What do you recommend to gloss wheels then?

[@terrywilliams4223]

So what if we were to buy your dip dissolver product then use power washer? I’m sure that would work in getting it all off pretty quickly.

[@yaitstac7267]

looks like it worked to me. no rocks are chiping that

[@mrnomad55]

Yep glad I just saw your video. I was just going to put this on my wheels. Thanks for the info.

[@brandonbundick7632]

i bought a 2013 FR-s that was basically this hard to peel for the entire car, super thin coat, and high gloss Im still peeling but its taken 2 days to to get the bumper and trunk done ya live and ya learn what to look out for when buying stuff from dealers

[@tonymeehan7859]

how does this stuff hold up when it comes to tire changers?

[@Bahaa425]

Wouldn’t you be able to dip the wheel in acetone and just remove it all at once? I know 2k clear on dip isn’t a good idea for this reason but I feel acetone would make quick work of the 2k and dip if you wanted that extra gloss

[@jaceri139]

Bahaa 425 even a pressure washer would make very quick work of it for removal

[@salbedo_daddy6219]

How long will it stay glossy as a everyday driver ???

[@goalmaker88]

Fonzie’s encouraging in the beginning is all we need to get our lives right! LOLOL I need that as an audio track 🤣🤣🤣

[@pmaradiaga9073]

Fantastic paint job if you ask me