Hikvision IDS Turbo HD 5.0 Deep Learning DVR

[@hardiman5301]

Do u have use ds 7208 hqhi m1/s?? Is that can false alarm filter to until 4 ch detection?

[@hardiman5301]

Im sory i mean ids 7208hqhi m1/s

[@DVSLTD]

@@hardiman5301 we have a range of IDS DVRS that can do the false alarm filter

[@hardiman5301]

And i hve buy it.. and it can 4 channels intrusion vca detection for human and vch

[@hardiman5301]

@@DVSLTD thq for ur help sir

[@zed300]

Hi How many lines or intrusion areas can you have per camera Thanks

[@DVSLTD]

Hi , on the IDS turbo DVR its one of each per camera for the 4 channels using the deep learning

[@Himate]

Can the Human/Car detection be used on an IP connected camera ?

[@DVSLTD]

Hi , yes we have IDS deep learning NVR with this function like the IDS-7700NXI-I4/16P/16S ( B) , and 9000 , also the Acusense Easy IP4.0 cameras have this function with less performance

[@Marcushin]

Please need help, i can detect human, vehicle... on ip chanel? In this DVR? Through only dvr.

[@DVSLTD]

If the iP camera connected to it has VCA it will pass alarm to DVR like NVR but if IP camera doesn’t have vca like an older hik model then can’t do anything about that

[@panaponvorranuch4646]

iDS-7208HUHI-K1/4S can support POC ?

[@DVSLTD]

Hey , sadly not only the /P models support POC

[@TheHaryken]

Great ! What model is it ? iDS-7208HUHI-K1/4S ?

[@DVSLTD]

Yes it is

[@TheHaryken]

​@@DVSLTD Fantastic ! Thank you !

[@DVSLTD]

@@TheHaryken No, thank you for watching :)

[@franksam6818]

Has anyone used the mobile app to trigger turbo dvr outputs ? If so can multiple outputs be triggered ? Would like to trigger external devices via my cellphone. Thanks

[@thejohner1962]

Hi There . Can you help me please? I have an ids 7208 HUHI DVR with six analog cameras connected. I cannot get live view on ivms4200 when using p2p . I can see cameras on hikconnect . I can do instant playback on ivms 4200 but no live view. the DVr is connected via 3g/4g router , upload 15 download 10 . Strangely on the same LAN using p2p I has live view. I tis most frustrating . I Any help wouls be gretly appreciated. love your videos .

[@DVSLTD]

can you check this function , on the local DVR or HIK-Connect app under the device can you disable ( on app ) the image encryption function and then try again

[@thejohner1962]

@@DVSLTD Thanks for your reply and time. I disabled encryption from the beginning , then thought I had bandwidth issues but router has 15meg upload . In the hikconnect App the cameras only show individually on HD (not Basic) and also in ivms4200 they are now showing after choosing High Definition stream option. it is as if the substream(fluent basic) has gone missing . Any ideas? Thanks again. John

[@DVSLTD]

@@thejohner1962 try this , go to the local DVR interface and check the sub-stream value for each camera is set to no more than 512Kbps , if more adjust down and save , if less make it 512Kbps and save, also make sure the firmware for the device is up to date 😊

[@hakamyosfan6081]

Good If you can making video for alram in hikevison dvr

[@DVSLTD]

thanks for watching and thank you for the suggestion! :)

[@hardeekpatel1944]

Datasheet_of_iDS-2PT9122IX-DES(5-50mm)(4mm)_20171024 can Make Video For This Please

[@DVSLTD]

Thanks, ok we will put this in the schedule

[@AHMAD_RAMO]

Hello dear friend

[@AHMAD_RAMO]

I can contact you by e-mail