HIKVISION INTERCOM ADD CARD VIA IVMS4200

Join this channel to get access to perks:
/ @adshikvision
HIKVISION INTERCOM ADD CARD VIA IVMS4200,
MISSING MASTER CARD DONT WORY YOU CAN REGISTER CARD VIA IVMS4200

[@OmryAviry]

Did this with the original card I got with the ds-kd8003, everything went well until I tried to apply all changes and it failed saying the card is not supported. same happened with a Mifare chip I bought. the reader is able to read it but it fails when I apply the changes to the device. Any suggestions?

[@abmisbah]

Hello bro, thanks for the video, did you tested the template customization, when i setup cards to open from 8h to 12h , and applying to device, the card open all time all day,

[@adshikvision]

check your created template and schedule once more...

[@saeed3409]

It doesn't show the number after i read the card. Im using rfid white cards same ones on video. Please help

[@adshikvision]

RFID CARD WILL NOT SUPPORT HIKVISION INTERCOM USE MIFARE CARD ICS-50 IS MODEL NO

[@nicolasgikopoulos6191]

I would like to thank you for this guide. I followed your guide step by step but Sadly it doesn't show the number after I read the card that came with the device. I press read, I pass the card over the device, It does the double beep but the ivms does not read the number and just waits. Apparently I have just bought the first version of Door Station DS-KV8413-WME1 with firmware V2.1.35 build 210507. Any help will be appreciated.

[@adshikvision]

Make sure your card is mifare card. Hikvision intercom will not support RF id card proximity card...

[@nicolasgikopoulos6191]

@@adshikvision Thank you very much for your response! It is a mifare card. As I said it was inside the box with the door station. I also tested the card with an Android MIFARE Classic Tool, and it was recognized as an MIFARE card.

[@seguricam6855]

Maybe you are using the card that came in the box, it is a master card

[@seguricam6855]

It is a master card, pass this card over the device you hear 2 beeps, now pass the new card you hear 1 beep finally pass the master card again you will hear 2 beeps that's all.

[@shakeelpatel4053]

Hello I wanted to know what if my master card has been stolen how to remove it from the system? Please help🙏

[@ruifernandes6737]

where do you find the password you used? I already tried several but without sucess

[@altungaming8776]

What type of card is accepted or what type of frequency is it because I lost my card?

[@adshikvision]

It's support mifare card. Model no ICS-50

[@robertlupse56]

Hello I get an applying error while I apply changes, what can I do?

[@adshikvision]

update latest firmware... then you can login device via browser then you can add user..

[@AHMED-hz6lh]

Please brother which the kind of card name rfid card can work or no

[@adshikvision]

HIVISION INTERCOM ONLY SUPPORT MIFARE CARD.... MODEL ICS-50

[@AHMED-hz6lh]

@@adshikvision how i add the card brother to phone Xiaomi to open the door

[@altungaming8776]

bro i have a problem after aplay al to divaice theis problem : Applying failed..(Error code: iVMS-4200.AccessController.S.exe[6109].)

[@adshikvision]

Let me check

[@altungaming8776]

@@adshikvision I think I have a problem with the type of card. What type of card does Hikvision accept?