[HINDI] Steering Basics : Camber | Caster | Toe-in | Toe-Out | KPI | SAI | Animation!

Namaskar Dosto aj hum is video me bat karenge Steering Basics ke bare mai!!
aj is video mai hum 4 cheez dekhenge!
1. Caster angle kya hai?
2. Camber Angle kya hai?
3. Toe in aur toe out kya hai?
4. King Pin inclination aur Steering Axis Inclination kya hota hai?
Camber angle: Camber angle is the angle made by the wheels of a vehicle; specifically, it is the angle between the vertical axis of the wheels used for steering and the vertical axis of the vehicle when viewed from the front or rear. It is used in the design of steering and suspension.
Caster Angle: The caster angle or castor angle is the angular displacement of the steering axis from the vertical axis of a steered wheel in a car, motorcycle, bicycle or other vehicle, measured in the longitudinal direction.
Toe in: a slight forward convergence of a pair of wheels so that they are closer together in front than behind.
Toe Out: a slight forward divergence of a pair of wheels so that they are closer together behind than in front.
King Pin Inclination: King pin angle, virtual or physical, is sometimes referred to as it's acronym KPA, or alternatively king pin inclination (KPI), or steering axis inclination, SAI. On most modern designs, the kingpin angle is set relative to the true vertical line, as viewed from the front or back of the vehicle.
aise hi zyada videos ko dekhne ke liye subscribe kijiye the automotive channel ko!!
#Camber #caster #Steering

[@AscendedStark]

Keep on the efforts Bro ! Don't get distracted by Low Subscribers. You'll soon get more. Just don't Give Up 😉👍🏻

[@Pranav01k]

Now check 😊

[@chandramanikumar6636]

आपके वीडियो का कोई जवाब नही ।। बेहतरीन ।।।

[@TheAutomotives]

Thanks!

[@TheAutomotives]

Share to your friends and tell them to spread more. Thanks

[@hsbokra]

Car sensor list, their symptoms, diagnostics and replacing ki videos bnav, plzzz

[@ashishkumarsenapati662]

u really make understanding automotive so simple..kudos to u...lovely animation..hats off..keep up the good work

[@MAHENDRAKUMAR-xt2wt]

Sir thankyou Bahut km smy me bahut khub btaya

[@er.vishnusanodiya2983]

Very good explanation 👍👍👍

[@sahilhussain7571]

Combined angle k bare me bataye

[@kedarchavan6304]

Amazing explanation with great animation feature.. I was looking for this kind of knowledge only which can easily decode lots of basic concepts and engineering as well. Keep it up. I will suggest you to create application for this which will helps lil bit more. Well wishes.

[@mohdsakib79]

nice video, sir ho sake to ac switch k baare me video banaiye plzz jinse compressor cut off krta h

[@TheAutomotives]

Okay! Dekhna padega!

[@mahabirpradhan8146]

Nice explained

[@narsingpatil9974]

Good information

[@nipundas1293]

Animation is good💥🔥

[@maivlogpe3322]

Nice explanation sir thanks

[@ManishBhabua]

Good job

[@ALOKKUMAR-cy8wx]

Video mast hai

[@makwanayash6022]

Differential Ke uper video banao

[@TheJATIN1122]

Make video of anti roll bar

[@rajputroshan7403]

Sir, Class se jyada video mai or maza aata hai samajne mai.

[@abdfit3813]

Bro Euro 1 se ly kr euro 6 tak ka video b bnao plzz , big fans hyn ham sab dost apky

[@shyamdahal8358]

thank u sir

[@ganeshnayka1929]

Cooling fan system video

[@gurukiran8117]

Write something about sports cars plss

[@skpatel8257]

Meri sentro me left whil bahar ki sid hay to kese set kare

[@mohammadalmasahmad595]

thank u

[@rajeev_kumar]

Good

[@kiranjagtap3717]

can you explain wheel balancing

[@TheAutomotives]

Yes we can

[@TheAutomotives]

Many videos are in queue Till than stay tuned on the Automotives , keep sharing the Automotives.

[@uditsaxena3844]

thank you so much

[@j9392]

I was like whoaaa did you say

[@mohitjangra9960]

Please give complete knowledge

[@Shuaibshauibansari]

Sar acm bcm tcm air bag abs ac viring par video dalo fool information

[@ritiksahu5983]

Dude colour combinations bas thoda galat h....baki SB bdhiya h

[@hr13ak]

Ankit kumar

[@sawan6585]

Inka purpose bhi bta dete to behtar hota

[@TheAutomotives]

Ackerman wala video dekh lijiye!

[@itsture187]

Govt. ITI Hassangarh Praveen

[@sandeepmaurya9815]

Toe in and toe out mistake..🙏

[@sunilsharma5130]

What mistake

[@TheJATIN1122]

Ebf

[@UmeshKumar-hv6ow]

Government ITI Hassangarh Umesh Add. No. 06

[@TheJATIN1122]

EBD

[@funnywithff623]

Tor video valo na

[@shahidchaudhary52]

Thanks for covering a quater of my automobile syllabus in 4 mins U just did what my professors are trying to do for the past 4 months

[@malikafrazawan3988]

Twitter 99? Ml p0 . O O

[@ansongabriel8623]

I guess it is quite randomly asking but does anybody know a good place to watch new movies online?

[@wyattmaximus2684]

@Anson Gabriel i use FlixZone. Just search on google for it =)

[@avi34669]

well that just seems like comprehension issue on your part. This is not very difficult to get even from a book. Don't blame the professors.

[@makwanayash6022]

Differential Ke uper video banao

[@FMVFilms]

3:15 get colours of text same as axis lines it got confusing at one point

[@measubhashreenayak3697]

I think they are of opposing colours

[@er.mohammedsuhails7456]

There is a mistake in 03:20 sec for steering axis the colour is green but in words you wrote steering axis in yellow colour it is opp so change it its not a big mistake but it will be helpful

[@arijeettripathy]

Is the king pin inclination also known as the "included angle" ?? coz included angle = SAI + camber angle

[@TheAutomotives]

No.. KPI and SAI both are same.

[@Technicalmithun1234]

Nice

[@increaseyourknowledge3818]

Hii

[@jaskransinghsingh2719]

Thanks

[@TheOnlyRaceEngineer]

you rock bro... aik dum mast video... keep it going mate

[@TheAutomotives]

Thanks! Apke friends ko bhi share kro!!

[@TheAutomotives]

Share to your friends and tell them to spread more. Thanks

[@vijaykshirsagar4461]

Aap roll center, vehicle center axis or understeer and oversteer par video banavo na sir.....please please please ........

[@zahidahmad3260]

Most of the vehicles use Negative Camber angle cuz it helps during cornering cuz it has more contact patch with road.

[@bayimkamran]

Need Videos on Turbocharger, intercooler and supercharger

[@rajghosh6095]

Mistake @3.08 regarding marking of steering axis and wheel axis I think

[@sunnymorkheriya2807]

Govt. Iti hassangarh Roll. No... 16 Amarjeet

[@yogeshshewale579]

How to Stearing column electric power steering and hydraulic power steering

[@ankushthakare3226]

Thanks sir.... Plz caster angle more explain plz...😊

[@mr.kabir2.0]

Last ka KPI angle normal and KP center k mady bnne wala kon KPI hota hai. Aur sb sahi btaye ho . thanks

[@NonwovenRudrax]

Nice explained , well done

[@TheAutomotives]

Thank You!

[@SureshLahri-tx5lx]

Bahut help milta KZbin se thank you so much 🙏🙏

[@krana4004]

why car produce a shooting flame from the tail pipe of the exhaust..can u plz make a video on it..?

[@pratikkshirsagar6481]

Ek no

[@shivrathore7558]

Govt. ITI Hassangarh Admission No. 18 Shiv Kumar

[@purvishah4999]

can u please make a video on following ? 1 VVT 2 i VTEC 3 i DTEC 4 DDIS

[@TheAutomotives]

For sure!! Actually they all are already in progress! They will be uploaded end of the month or may be next month! #Stay_Tuned #Thanks_for_Support

[@madhushila]

jabardast

[@Prince_kaushik823]

Govt I. T. I Hassangarh Rahul Roll. No. 14

[@parasbisht9900]

Very nice explanation... Keep it up!!

[@kunaltrivedi5977]

Pros or cons to btate itni choti video kess kaam ki

[@Raghavjuyal70]

Why is important in automobile ye made the video

[@mdsajjathossain7039]

love from Bangladesh ❤❤❤

[@vivekkumarverma]

thi video i like

[@MrEspinosa02]

English......

[@getnotification9590]

video long bnao 10 mint tk

[@ankitantil6233]

Govt ITI hassanghar Rahul 12

[@karanwakle4805]

Nice presentation 🤩🤩

[@RahulSharma-pe6gy]

Govt iti hassangarh add no 94 Rahul

[@jaikaushik1053]

Govt iti hassangarh Jai kaushik

[@brothersgaming4187]

Govt iti hassangarh Navneet

[@jbvikashvi]

Govt Iti hassangarh Vikash

[@babaimusickingofmusic1204]

So good vidieo

[@uday9647]

Wonderful

[@amaleshgiri801]

👍

[@shazzadhossainsagor954]

Nice

[@fantasticbulbasaur3594]

Discuss

[@jaykapadiya7746]

Good

[@manojmodagekar2127]

Must

[@pardesmayar3314]

Best!

[@shuraimzaid6726]

I think steering and wheel axis notation are given wrong

[@TheAutomotives]

Nope.. check one more time!

[@Prasanth-lc4gl]

Thnku

[@surendrakeshri5042]

Sir aise badhayenge to mai coching chod ghar baith jaunga aur aap ka video dekhunga

[@TheAutomotives]

Padhai jarur kro.. sath mai ye dekho.. madad milegi..

[@mohdshadab5299]

Sir make a vidio on Front Axle, Types - Stub double drop, fully dropped, load distribution, effect of braking on axle shape, steering head, Elliot and reverse Elliot, steering knuckle, thanks sir,,

[@bhaktchandigarhkai]

nice bhai bahut ache se smjhaya apne nice

[@sankalpsharma3101]

you worth thousands like.. thankyou

[@TheAutomotives]

Welcome.. share with friends to make your statement True!

[@abdulhanif4460]

Sir, what are the pros and cons by providing caster, camber, toe in and toe out.. etc. Make a video on that concept sir..

[@sawan6585]

Turbocharger supercharger

[@TheAutomotives]

Supercharger to banaya hai.. Turbo ban raha hai.. Kuch week mai upload hoga

[@swapnalipatil9310]

How to check electrical connectors &sensors of the tractor ...plz make video on these

[@sahilsharma9062]

Sir I have a doubt. Caster angle should be negative or positive and upto what degree?

[@nishacharjeevvlogs]

From next time please add reasons for these as well, it would be of great help like why camber & caster is given so that we can write in paper😅

[@nitishdhiman4468]

Please make video on transmission type

[@mohammadmuzammil4848]

negative camber is good for cornering !

[@abhijitingole3573]

Please add video on working of air intake system..

[@realhindustani3212]

Bhai ek video 2strock vs 4strock engine ka video please

[@TheAutomotives]

Sure.. Pahele 2 stroke ka working fir comparison aayega

[@prashanthdevadiga7972]

Nice video