Hisingy Firefly Christmas Morning Setup & First Flights -

[@eatyourvegfpv]

The ending!!!! I'm literally holding my breath until you let us know what happened! Mainly we're all just worried about Teddy...! 😳

[@CiottiFPV]

The drone hit the power button on the surge protector everything is plugged into and KZbin only gives you 60 seconds to get the stream back up before they automatically end it :)

[@eatyourvegfpv]

@ Ahhhhh! I bet you couldn’t do that twice! 😂 I can imagine the air was blue!!! Great stream and good to see you laughing 😉

[@GardoRotor]

Happy turkey day!!! Toy quads got us started in this tiny madness..

[@reconfpv03]

Great ripping! Love watching a great rip at a nice open spot with some trees! 🔥

[@clifffield1]

BEST. END. EVER.

[@apachesmokewoundedsniper]

27-11-2024 What’s up Ciotti and all you GG? 00:01:13 On this stream…… 00:12:06 Support the madness. 00:15:26 I'm really interested to see if yours do the thing where they self-arm and fly away when you go to set then on the ground. very dangerous. 00:16:04 I just put skrrt motors on mob 6 eco - going to run blades 00:16:12 If it’s been asked, how do feel about the Emax nano scout? 00:16:40 But does it freestyle “ works for Infinity loops so it would probably work for you too. I would watch it. 00:16:56 Where can we get the motor spacers? Or maybe the thickness so we can make them?? 00:18:44 I'll get those motor spacers sent out this weekend...do you think there will be a need for the thinner spacers? 0.8mm vs the 1.25mm 00:19:15 Does the girl in house want to test also later, 00:20:05 As heavy as that rig is - will I still need a motor limit on the skrrt with 1210s? 00:20:35 So the other reviewers show it repeatedly, plug in quad, and drop it on the ground or table from about 2 inches off the ground. immediately arms and shoots up every time. 00:20:51 What are the motor spacers. 00:25:20 Hisingy calls it a "feature" lol called something like toss and fly where you can throw them up in the air and they self-arm. but when you drop it on the ground it arms and flies away. 00:25:30 My bad I have to wait a week to get the ORT antenna and drill bits, had a nail get in my tire on the road oof. 00:25:40 What’s your fav 65mm rig atm, perhaps your Ultimate freestyle rig? 00:27:30 Which 75mm frame works the best with using 2x 1s batteries? 00:32:52 Toss and fly yeah let's make a beginner drone with a feature of one of the most dangerous stunts in the hobby - genius 00:33:42 Will I notice a difference in power on air65 going from beta 27kkv to HM 27kkv? or should I just jump to screamer 32kkv? don't want to solder twice. biblade again. 00:34:38 preferable motor limit on 75mm 2s with 1002 20k Kv? 00:36:04 I got some GEPRC SPEEDX2 1102 10000KV for free in a recent order what should I do with them? What kind of build? 00:38:11 I know we’ve officially left 75mm 1S behind but have you seen the new BetaFPV Matrix 5-in-1 aio? It comes in the meteor 75 pro now has a .2mm thicker board & motor plugs. 00:42:40 Frames with a 1s bracket, you just need a tpu sling or even a little band to hold them together. 00:47:11 I’ll be making my 2s rig xt30 and not losing 1 second of sleep over it with the power these things have 00:47:20 What’s the weight difference between two bt2.0 vs one bt3.0 on the whoop then? should be a bit more weight as well 00:47:45 How would those low pitch tri blades do on a 40,000kv rig? 00:48:30 Have you seen the new tbs aio? It’s 1-2s 7amp xfire built in, osd chip. 00:50:04 Mobula 8 motors are 3 screw 1103 11kkv and use m1. 00:50:24 My favorite small quad is the Craftedkwad odonada HD with 2s 2 inch prop. 00:51:24 Do you have a 450mah 2s to weigh instead of the 300 vs the 2x 1s 00:52:16 Long time watcher, haven’t been in stream in a while, is there a video or somewhere you posted the build for that 2s flyer? 00:54:42 Are there any 5" biblade worth trying beside the ethics pbj? 00:55:03 Ph2.0 and Bt2.0 have 2mm pins, vs ph1.25 has 1.25mm pins. that's why it's called that. no clue why bt3.0 is called thar. maybe the pins are 3mm but idk. 00:55:22 The happymodel Mobula 8 motors are the biggest motors that I know of that use the 3 screw mount pattern. so 1.6m makes sense for a big 1103 on a 2" prop. 00:56:02 Did you miss? Botgrinder whoop Harris, and they took his shit. 00:56:28 Is there a 1002 motor available that wouldn't require motor limiting? 00:57:40 TW had IGOW's in stock 3days ago ......... for like 12 seconds, I couldn't even hit the buy button fast enough. Jesse just needs to order a million. 00:58:05 Did you see Emax new battery connector? 00:58:18 I have a bunch of 1002 23500kv....what kind of motor limit? 70% or so? 00:58:39 Hisingy Firefly unboxing. 01:15:05 Let’s dive blind in to setting up the Hisingy. 01:16:30 Most toy drones bind with every plug in. throttle up throttle down. 01:18:17 Ussing the quick guide. 01:24:50 Will the Hisingy startup? 01:29:25 Checking out the Hisingy Firefly EX. 01:34:53 Focusing on the Hisingy fpv whoop. 01:37:18 Let’s bind the goggles. 01:46:44 Let’s fly. 02:02:24 App for freestyle mode. Stay safe everyone and have fun flying.

[@EarthWalkerOne]

"Oh boy that is sketchy. ohhhkay no no no..." 🤣🤣

[@robertrosicrucion]

"Will it rip?" would be a great thing to start doing IMO.

[@le_tranq]

You can run that Cockroach 75 without the brace, there's some 3D prints to hold 2s batteries. I'm looking into it because you can easily mount stacks top and bottom and it also has the place to put a batwing style camera mount.

[@CiottiFPV]

It's reeeeally wobbly without the brace, back when I was figuring out the Tiny Lifter the only frame setup that was rigid enough was the cockroach 75 with the brace, I tried all the other setups

[@le_tranq]

@@CiottiFPV You mean just for a tiny lifter though? Because the one I have here is so much stiffer than the Mob75 V4 frame. I was thinking of using it for a Walksnail/DJI 2s rig.

[@Halphbaked210]

Thankyou ciotti

[@vpr0]

You absolutely should do "will it rip", because you we can trust, unlike some other people that do similar reviews

[@mikerich32]

Throwing shade at infinity loops?

[@le_tranq]

2 x 450mah 1s (24g) actually weighs less than 1 x 450mah bt3.0 2s (27g).

[@CiottiFPV]

Yeah man, the BetaFPV BT3.0 450 is just silly heavy, I forgot to mention that Tiny Whoop has one that only weighs 23.8 grams but at that point I would rather run the double battery setup so I can do something with all these 1s 450's lol