HO Scale Fails and Derailment Part 5!

[@JamesAnimationsBFS]

1:12 "Once and engine attached to a train, was afraid if a few drops of rain. It went into a tunnel and queaked though its funnel, and wouldn't come out again!"

[@atlasthenumber5msr440]

0:36 i love these bois

[@manageable_f164]

0:56 where the heck did you get that boxcar?

[@SCL3618]

It's the Lionel HO exploding boxcar- I found these on Ebay and at shows.

[@manageable_f164]

@@SCL3618 nice

[@James-Railyard]

I sense a lot of underweight cars, underpowered locomotives, and use of plastic couplers. The custom crossings might need to be lowered to avoid the trip pins.

[@25mfd]

i temporarily switched to using all mchenry couplers... i like the way they uncouple using a small K & S round jewelry file... i have a switching layout and do 99% cutting cars off on different tracks here and there but no mainline running at track speed... i'd have to go back with kadees if i went mainline running... plastic couplers on the mainline is asking for unwanted uncouplings

[@up1943productions]

That should be the Bloopers and OOPS!

[@up1943productions]

OK Sir.

[@the_autism_express]

All fails shown (yes, I'm using British terms for rolling stock): 0:02: faulty tracks cause engine failure 0:08: string line derailment 0:16: one reason why I don't like the brake hoses on knuckle couplers 0:23: troublesome trucks (how'd the brakevan survive) 0:35: a heavy train and an underpowered locomotive (but, it's an S100 with a Japanese brakevan so who cares?) 0:56: throwing missles at a van of explosives 1:03: how? 1:10: another reason why I don't like the brake hoses on knuckle couplers 1:14: ded 1:18: faulty wheels 1:25: I don't know 1:37: misaligned points 1:44: ballast at an unsafe height level 1:48: a derailed locomotive 1:55: troublesome trucks again 2:08: ... 2:18: something on the line 2:33: dead spot 2:35: sending a shunter to do a mainline engine's work 2:51: More faulty wheels But, overall, nice

[@goldgamercommenting2990]

1:24 ah shit Here we go again

[@hongmeiwang5175]

At 1:44 the caboose thought that it was a switch lol

[@RavennaRailfan4070]

Caboose lettering: Thanks for using Coast Line *CRASHES*

[@cashstrains652]

Now that's my type of comedy•

[@bulldozer281]

CJ back at the train yard again 1:24

[@SeanBodine]

Thanks for using Coast Line (Derails caboose)

[@YukariAkiyamaTanks]

The Man is back in style!

[@Insect_Expert1489]

Sometimes the troublesome trucks are the ones playing tricks and creating a mess on your layout schedules

[@vanguardRailgun924]

Dang Troublesome Trucks

[@kaylawhite4857]

Oh Kagay hey I think that you should get to that singing why computer live

[@Goofyboi2002]

1:03 “FREE BIRD” Btw what happened there?

[@trains_planes_and_automobi8977]

0:24 “We’ve broken away! We’ve broken away!” Shouted the trucks.

[@tryorse8340]

0:32 at least the caboose made it

[@danielferrovias]

0:38 rosie having wheel-slips and other stories.

[@CassandraPantaristi]

Lol.

[@jappedut9009]

I love ❤ these videos and the sounds incorporated 😀 please don't stop making them 🙏

[@SCL3618]

Will keep them rolling as long as I have stuff go wrong on camera! Just takes time to film.

[@jappedut9009]

@@SCL3618 ❤👍❤

[@acehaffidztvchannel3632]

@@SCL3618 you smell like baka Mikasa

[@WickedFizz999]

That one sound effect from 'Cars'

[@olhaburylo2834]

CRASH ending the trucks CRASHED 😂😂😂😂

[@wolfzillaproductions4563]

0:07 When your centerbeam loses the will to live

[@iatif1995]

Yes! I've been waiting for more! I always have the same problem with couplers getting stuck from rail at a diamond or a crossing.

[@yomikaianimator4689]

1:24 “ah sh-t, here we go again” 1:43 “are u sure about that” 0:45 “run” 0:04 “well, I found a dead spot” 0:20 “nice” 0:51 “woo, wee *missed the logs & hit the railcars* 0:56 *boxcar destroyed*

[@goldgamercommenting2990]

0:22 WHY ARE YOU RUNNING

[@thomaswilkinson3241]

Looks like Yellow Caboose needs some Serious Maintenance. 😅Considering how often she wants to go off for shopping. 😂

[@davidstrainsandlego]

Didn't expect to see those lionel exploding boxcars

[@SCL3618]

Always have to mix it up! I've had them for a while, just weren't run often.

[@goldgamercommenting2990]

0:22 I thought we fixed the situation again

[@Caio959]

New subscriber I'm from Brazil your channel is really cool

[@SCL3618]

Thanks for watching!

[@lucasblanton5203]

Cant wait for part 6

[@dashdimas2539]

1:12 emergency fuel cuttoff

[@dwightbernheimer331]

That's why God made S scale and O scale...Lol good stuff thanks for posting

[@SCL3618]

Those fall a bit harder when things get sideways lol. Thanks for watching!

[@dwightbernheimer331]

@@SCL3618 LOL thanks for posting

[@jacobdurbin5480]

What brand is that ACL caboose?

[@SCL3618]

It's a resin kit, I believe Wrighttrak. Bought it already assembled.

[@AIB2K8]

Troublesome trucks up to their tricks again at 0:24

[@leohopkins71]

Super Mario Bros game over and again with the John Deere's? Seriously, what am I supposed to tell Farmer Brown? Dagnab it!

[@tracynation2820]

An excellent video. Hello from the Tracy Mountain Railway in Colorado. 💙 T.E.N.

[@SCL3618]

Thanks for watching!

[@SRTRailfanProduction]

0:51 Weeeeeeeee

[@oregonwesternrailroadprodu5239]

up: and i would have gotten away with it if it wasnt for you meddling foamers!

[@treystewart544]

Those train fails are awesome

[@Dproud2700]

Engineer Bob sez "always check your coupler glad hands for proper height and that your cars are properly weighted"

[@haaseshouseoscience6377]

0:22 "Why are you running?!" & 2:20 "Well that hurt, but it still runs so Round 2" got me laughing so hard. The Troublesome Trucks are at it again! Great Job btw!

[@thetrainguy4797]

Ppppp

[@kaylawhite4857]

You!

[@UnionPacificFan]

Legit thought that was kashawn at 1:54

[@amygawne682]

The legend is back at it again!

[@SquidSlayR]

Pls do videos with bachmann Thomas and friends on the layout

[@robintheslavewr1513]

No

[@jessicamauriciogarcia7672]

Están muy chidos

[@SHANTO_GAMER_X147]

Bro need next part and long time

[@HLTrains5003]

I love that little steam switcher! Who made it?

[@SCL3618]

That's a Rivarossi (Hornby) S100 with DCC added.

[@carlosthec5ashunter]

and that is also a engine numbered 5001, from USATC. and yes 10 is 5001, thats his USATC number. also i made the engine as a he because i have an oc that is like him.

[@HLTrains5003]

@@SCL3618 So where can I find one?

[@SCL3618]

@@HLTrains5003 You'll have to look online or a shop that may still have them.

[@dashdimas2539]

0:27 yep use the trucks sound when they are a runaway

[@RailsofForney]

0:36 Running a Granite Rock Co. 0-6-0 Granite Rock Co. 0-6-0 stalls Burnout audio starts playing Burnout audio stops playing (Sick beat starts playing) RUN YEET

[@tristanexists1806]

🤨

[@edwardo6834]

Luckily no one was hurt

[@BAS19.6]

Hey will you not stall? That one DCC locomotive N O

[@ARP_GA]

Won’t be there for the premiere because of school but after, I’ll be watching it!

[@SCL3618]

I'll be in a class myself, but will be following up when I get a break shortly after!

[@ARP_GA]

@@SCL3618 Ok! Me and my dad love watching these videos. I love to railfan and use my model trains in my basement.

[@deenasharise4009]

Can you please please make more videos like these and upload them... LOL🤣🤣🤣

[@SCL3618]

All in time! As long as stuff keeps messing up, I'll have content.

[@deenasharise4009]

@@SCL3618 looking forward to it. :)

[@SgtPotatoChip6356]

I don't know why any of these railroad employees stay on after all these incidents! Really funny, and I'm making sure I note these so I don't have anything super bad happen to my units.

[@SCL3618]

The pay and benefits package keeps them around! Thanks for watching!

[@jeevantraplordsmobile]

@@SCL3618 The moment when Engine couldn't pull anymore. Engine to SCL3618 :- HELP ME , HELP ME NI##A !

[@ugh3926]

@@SCL3618 😅👍

[@acehaffidztvchannel3632]

@@jeevantraplordsmobileyou kinda smell like a baka Mikasa

[@jeevantraplordsmobile]

@@acehaffidztvchannel3632 Thank you 😍

[@tesleywhompson9555]

Great video as always, i do have a question though, Is there a video that show a overall view of the layout?

[@SCL3618]

I haven't done an outright video with a layout tour, but most of my recent engine features showcase some of the better spots.

[@tesleywhompson9555]

@@SCL3618 Nice, ill do a re - watch on them so i can see the background, would love to maybe see a video showing some of the layout routes and overall space in the future, keep it up my friend!

[@SCL3618]

@@tesleywhompson9555 Will definently keep it in mind for a future project! Just have to get down there when it's quiet so I can work a bit easier.

[@tesleywhompson9555]

@@SCL3618 no worries, take your time, quality over quantity right?

[@PmerjYT]

Thank god it's lunch time so i can. Watch

[@Foxymorris9236]

Theos were some nice examples of railcars junping the tracks and derailing there is a steam locomotive that had it furnt guied truck deraild at a packted gavel crosing and had to use the rerailers that are on the trander of that locomotive which is a histery leasn of how railroading hard times were back than

[@unknown-oo9mg]

TRAIN CRASHES + TOY + MEMES = THIS

[@Jd_Night]

Wait where is this- it looks familiar but idk.

[@three_strike175]

I think you should cut a little bit on the hose so that it wouldn't be a problem. Real fun vids

[@phillipsakalik4877]

I don’t understand how railroads are allowed to keep building trains this way after all the derailments that have happened.

[@sadcattoclips]

Because in most cases it’s human error

[@Ferromodelismomoderno]

Real sounds of derailments.

[@Insect_Expert1489]

0:44 a Japanese JNR brake van !!

[@SCL3618]

Not the last appearance of it either!

[@Insect_Expert1489]

@@SCL3618 where?

[@SCL3618]

@@Insect_Expert1489 It will appear in other videos..

[@antonbruce1241]

I don't mean to laugh at all of this, but...haven't we ALL had moments like this????

[@SCL3618]

Precisely why I started making these videos! Highlights the stuff that happens, but either people are afraid to admit or just deny. It's meant for laughs, so feel free!

[@antonbruce1241]

@@SCL3618 Oh, I am perfectly willing to admit when something on the Quail Valley Railroad "goes into the dumper". I'm just not one to deny reality!!!

[@kaylawhite4857]

How come you always beat me in a race

[@AlecWheelweld]

I need to know where to get that little black tank engine for a project I wanna start

[@BreakingNuyt]

It's from Rivarossi, If that helps.

[@DOTD-Ko7382]

How Foamers explain Norfolk Southern:

[@SCL3618]

They have plenty of solid evidence to draw on these days..lol

[@nenebonsato1039]

At least extended version caboose crew survive from the horrendous crash because the crew decouple of the cars to the tanker cars 0:28

[@Hiawatha_Productions]

Not a whole lot of steam engines on the layout huh

[@SCL3618]

I'm one of the few steam owners here.

[@Hiawatha_Productions]

I see, maybe I should join a model railroading club, although it is very unlikely at the moment considering the models I have in my collection and where I live

[@SCL3618]

@@Matts_Conrail_Chicago_Mainline The track- as evidenced by these videos- isn't as kind to my larger engines and passenger consists ,so I generally just stick to bringing diesels.

[@thatoddcanadian9837]

YES No 5 let's go

[@towcat]

Why the random Japanese Yo5000 at 0:40?

[@SCL3618]

Because I felt like running it that day lol

[@towcat]

Valid enough argument for me. I get asked that question a lot at op sessions. "Why are you using that?" Uh, cause I like it? Still on the hunt for one, myself. Got an 8000 but much prefer the 5000.

[@SCL3618]

@@towcat Gotta have fun, regardless of what others might think! I found one stateside from Modeltrainstuff when they hit, the second came from Hobby Search JP. Excellent cars for the price.

[@towcat]

Hey, I spent 300 on that Rapido F40 with the man, the myth, the legend, Mr. Kool Aid Man on the side. If I want to have it leading a drag of hoppers in your op, deal with it.

[@towcat]

Ran an op using a 1/80 Kato DE10. Did that two or three times. Got lots of questions and "what the hell is that" and it was great. And now it's broken and am sad.

[@stacybrooks3140]

The way the train car fell off the rails reminds me of wen my son made aw big train it fell off the rails and hit the floor so hard it split in half

[@NJ_Dev]

Coast line is better to be off line since it derails a lot

[@gustman9048]

Man I think it is just the layout that has troubles or some rolling stock

[@PCrailfan3790]

1:18 I have that exact box car but darker blue

[@cts3696]

0:40 got me on the floor

[@tdselite5421]

WHERE DO U BUY THESE ABSALOUTE DISSAPOINTMENT TTAIN?????

[@potatohead5910]

I have ACL 711!

[@flashrocket9158]

0:39 HELP ME..... HELP... ME!

[@uclongnguyen6575]

Very funny! I like those trouble some trucks

[@Thechosenone556]

0:51 Weeeeee😂😂

[@sadcattoclips]

Yaye New compilation

[@lucasblanton5203]

1:07 🤣🤣🤣🤣🤣🤣🤣🤣

[@JCmilwaukee]

Lol just keep dragging the car its fine

[@tangonaninc]

Crap the troublesome trucks did it again

[@Aiden_likes_trains3]

wElP wE FoUnD ThE DeAd SpOt

[@SCL3618]

@@Aiden_likes_trains3 YOU KNOW IT HOSS,,,,GOBBLESS

[@Aiden_likes_trains3]

@@SCL3618lol

[@scotthayes4135]

0:55 you broke it!

[@dkoz8321]

Universe is symmetrical at macroscales. Meaning that anything that can go wrong at HO scale can go wrong at real world scale and vice versa. So there are lessons here. That said , IMHO, HO scale does not scale weight and mass proportionatly from real thing. The trains, especially cars, are too light , and engines also have insufficient weight on wheels for consistent operation. The sets, along with tracks warp over time due to changes in temp and humidity of the enclosed environment. Alignment errors in tracks combined with HO scale rolling stock light weight contributes to derailing. Solution. Add brass weights to the rolling stock and some to engines. This will cause degradation of performance but result in more realistic , and challenging operation of HO scale equipment. Lead is toxic, don't use it. Iron will rust. So will steel from big box. Stainless steel is far too expensive for this application. But solid brass may fit the bill. Also weights from old school weight scales. The exact math for calculating redimensioned mass/ scale is kind of complicated, so just use trial and error.

[@Pensyfan19]

Norfolk Southern moment

[@noahrodriguez4532]

A person just made a farting sound

[@JosephWilliams1609]

At the same day

[@TailsFan369no2]

0:29 1:24 1:45 2:18 2:52 •insert obvious voice clip here•

[@hongmeiwang5175]

At 2:51 caboosebackwheels.exe stopped working

[@volodymyrrhapon5666]

Are you crazy? diselike.

[@maxwellwoodhouse2908]

This is why O gauge

[@SCL3618]

O derails twice as hard and expensive- from experience lol

[@lindastruikman9901]

0:45 run

[@akisan_JP]

色々面白かったです。

[@dashdimas2539]

0:39 wheelslip

[@noahrodriguez4532]

This is a short compilation

[@SCL3618]

Short videos like this do better with views

[@spongeboblover4584]

BCOL Train derailed!!!!!

[@doozowings4672]

And this ladies and gentlemen is why I go with O and not HO…..

[@SCL3618]

Oh it'll wreck harder in O...lol Been there, done that. Not to mention more expensive if you do send something tumbling off table.

[@CassandraPantaristi]

Gauge 1 and G scale are worse lol. Especially if your model is brass.

[@jawahytamaseli]

Troublesome truck's

[@AbelG8781]

Horrible trackwork will do that to a layout.

[@mirandasemple7828]

Thomas crashs

[@MTP_CHANNEL_]

S teir memes