HK X900 Tricopter - Built with 20 Amp Afro ESC's, NTM 28-26 1000kv motors and 10x4.7 Turnigy slow fly props. In this episode Matt covers a tricopter build as well as yaw PID tuning.
Пікірлер: 52
@Modelflyer210 жыл бұрын
Great video. I just test flew my HB Y3 fibreglass tri-copter and had all sorts of wobbles going on. Came home and found this video. Now the KK2 board setting makes far more sence. My next flight should have it all sorted. Thanks. UK.
@BadgerLaser6 жыл бұрын
thanks for making these vid series - really helpful no nonsense approach......
@eighthnotch_8 жыл бұрын
Very helpful video. and Matt really makes it easy to follow along.
@jgzifly10459 жыл бұрын
Matt, I have built two quad copters, one an SK450 and a tricopter. I have the same problem with all three. I take off fairly stable and tri to hover. Between one notch on the stick and the next I am either climbing or falling with no stable inbetween for hovering. I am using a spektrum 7s transmitter. I have the throtel adjust on the KK2.1 board set to 20 to get all the motors to start at once.
@chris-jones11 жыл бұрын
Awesome Matt, thanks for the yaw tuning.
@Nobel011 жыл бұрын
wow very nice job guys.. u r awesome , working every day ,thank you for your time in helping us . i would like to be familiar with this great hobby but i am too far :) .. and be funny all the times :) :) Thank you very much again. have a nice day. Yours Sincerely, Abdalhady
@RcBuddy11 жыл бұрын
Nice, and good yaw tutorials guys !
@jflynn1211 жыл бұрын
Very useful video. Would love to see details on LED setup. I've found a number of confusing instructions and would really like to see exactly how this was set up.
@terrygtheplaneboss9 жыл бұрын
Looks great I built the same one and mine is wobleing all over the place
@zee2231111 жыл бұрын
Hi Matt!! Can you please post a parts list for this copter..(Shopping List) links and optional upgrades will be appreciated too!!
@edwarddowling492811 жыл бұрын
Trolleydolly130 You need to go into misc settings and adjust the throttle for motors 1+2 (turn them down a bit). Hth
@Syberteck11 жыл бұрын
When will HK start selling spare parts for the X900? Nice Tricopter and great price too!
@olmosm110 жыл бұрын
Been waiting for the parts from HKing to make one since Dec/2013 Guess shipment lost. HK has not to date resolved my shipment. Looks like fun if I ever get my parts.
@gfdfperte42489 жыл бұрын
It would be nice if you listed all your settings for this bird with the kk 2.1.5 board. A lot of us are new and there is no manual for this board that I know of. Thanks and good vid over all.
@scusty111 жыл бұрын
That was great l have the same set up and was having trouble with yaw, but now its great thanks Steve. ps' l do have difficulty keeping a steady height while doing FPV ? any sugestions!!
@Crag1911 жыл бұрын
Good Info Thanks!
@oconnor99311 жыл бұрын
Great tuning guide. I followed it step by step.It all worked well, except I have a real bad oscillation on the ailerons.Back and forth.I tried adjusting it out no joy .I think the board is bad whats your input. Thanks .
@lordofbasement11 жыл бұрын
Which setup is this, where can i get those Lights in the front? your work is Awesome helpful, thanks for that!
@BLEZZ6810 жыл бұрын
To clarify,according to the KK2.1 motor layout for the tricop motor rotation(prop). . M1= CW--->BLADE1= CW (FL) . M2= CCW-->BLADE2= *CCW (FR) . M3= CW--->BLADE3= CW (BK) all provide lift. . M4= SERVO--->MOTION OPPOSITE TO STICK MOTION(L-R) VIEWED FROM THE BACK.
@bgates198610 жыл бұрын
I want to know the answer to this as well. Seems like mixed reviews. Some sites I've read all 3 props and motors turn same way but the kk2 configuration shows 2 ccw and 1cw
@bgates198610 жыл бұрын
Other way around 2 cw and 1ccw
@RCShufty10 жыл бұрын
It doesnt really matter, it will fly no matter what direction props you have, but it they are all the same direction, the tricopter will tend to lean in one direction instead of staying level and the tail servo will tilt more as it has to fight the extra torque of the motors. It flies best when the two front props are counter rotating (usually inwards towards each other is my preference) and the tail can be either (it really doesnt matter).
@john-paulhopman31811 жыл бұрын
Thanks for removing the props, though you then went and caught the tricopter. Using the balance plug for voltage alarms and LEDs was a great idea, possible to get some more information on the setup?
@Trolleydolly13011 жыл бұрын
Hi Matt. My Tri has a tendency to tilt backwards when trying to take off full throttle and straight up. Any idea what parameter I have to play with to minimize that?
@joeloalves174810 жыл бұрын
Hello..I´m new on tricopters..i´ve already by the x900..but i´ve a question.. about the radio setups..i now that i need confugurate the expo´s..it´s necessary another setup´s?
@TheScottsawesomeart11 жыл бұрын
MATT .. MY QUAD GOES TO THE LEFT DURING TAKEOFF AND IN FLIGHT BUT JUST SLIGHTLY DO I JUST ADD MORE I GAIN?? P.S. NICE VIDEO !
@madsloper10 жыл бұрын
What is the recommended servo size for this Tri that will fit into the servo mount; part# from HK?
@jamo230310 жыл бұрын
Hi, i really want to get in to tricopter flying and this looks like a good place to start. So i was wondering if you could reply to this message or add to the description a complete parts list, thank you in advance :)
@HyperJoe9 жыл бұрын
I'm having a problem and cannot find an answer anywhere,I CANNOT get the Board to Arm. I'm building a Tri-Copter via David Windestål's Instruction and Design and It's all ready to Fly, spent more hours programming and trying to get the KK2 to Arm than I spent in the actual build, what's up with that? I'm really at my wits end here, why can I not Arm the Board, I followed the instructions to a T! Not to mention watching Vids from 20 plus others, with no solution yet... PLEASE HELP!
@loudmandoug10 жыл бұрын
how did you connect the balance tab to the voltage monitor? what do I need to do this?
@MaddMaxxTcs9 жыл бұрын
With the kk2 board how can you add gps or return home. Or can you with this board..?
@HomeDistiller10 жыл бұрын
its funny that no one spotted the pulse jet in the corner lol
@thercworkshop867 жыл бұрын
I need help with the board I set up everything and I still can't fly it what do I do
@dungeonsound111 жыл бұрын
Hey Guys can you do a video on what happened to Stewart's Dead Cat?
@Redscorpio69111 жыл бұрын
calibrate your esc's and if it stays use min throttle setting.
@ba262910 жыл бұрын
What is the led lights parts list for that set up
@Ethanbrower1210 жыл бұрын
Can I get a parts list of all the parts used to build the tricopter. I am looking to build a tri on the x900 frame and the parts used in the video would be a big help
@yellowbluerc50479 жыл бұрын
probs not in desc
@tjmmachine9 жыл бұрын
HobbyKing Live I've built my tricopter but I don't know which motor plugs in where. I'm assuming that M1-M4 are were I plug it in but I have no idea which is which. Any help would be great.
@oferlv19 жыл бұрын
1 left 2 right 3 servo 4 tail
@basberend11 жыл бұрын
my motor 2 turns faster then 1 and 3 . where can i change/solve this ??
@KnucklesRT10 жыл бұрын
While setting up the servo in the Mixer Editor, my servo starts smoking and dies. Any idea what went wrong? So close to my first flight.
@yannoche10 жыл бұрын
Hi maybe you put 'HIGH' for an analog servo?
@3mincraft8287 жыл бұрын
when i incrase throttle before lift it will disarm please tell
@datodaticha69409 жыл бұрын
hi.Volt battery requires much?
@Wamfox11 жыл бұрын
what were those LED's
@hanspira111 жыл бұрын
Uma caridade , legenda !! seria muito bom...claro em português!
@TravisBMasterson11 жыл бұрын
H.A.L. Hexacopter PLease!
@doddezx11 жыл бұрын
such a copy of flite test build
@MrMatVids10 жыл бұрын
Congrats on copying David Windestals / RC Explorer & Flite Test youtube channels design for a tricopter. Nice to see Hobbyking being original.
@markgilland991710 жыл бұрын
David's tricopter video inspired me to build and fly my tri. This video explains what David didn't though - tuning the KK2 board for a tri. I'm still playing with the settings on my KK2 to get stable flight with self leveling off and this helps.