In this video I finally fix my Hobbywing 1060 ESC from going into Limp mode by using the Hobbywing Capacitor Module Kit 🤓👊🏻 Please consider liking and subscribing to support us on our weekly videos...
Пікірлер: 154
@CarminesRCTipsandTricks5 жыл бұрын
Glenn.... After 38 years in the Hobby, you just taught me something!! 😲 I've got a 1060... It ran for 10 seconds and stopped! The Red Light flashes, and nothing. No output. That was 4 months ago and I didn't Bin it, in case anyone found a cure. I'm truly poor, and can't afford new ESCs. 😭 Sucks. I just don't know if it's fried, or if there's anything I can do. But when you said "limp mode", I first thought "brownout"... But what I saw in the part where you ran the first one, that was something I've never seen before! Carmine ✈🚂🚙
@roberttierney9284 Жыл бұрын
What that capacitor pack does is help eliminate intermitant voltage “sag”. When you make a heavy demand for amperage such as heavy throttle with a thirsty motor and turning with a digital servo, the voltage from your battery may not be able to keep up. So you tire a capacitor or two in your case parallel to the battery. The capacitors store voltage and give it up when there is a sag in voltage. It avoids a quick “brown-out”. There are other capacitors you can add to your reciever. I have had to use these on my off-road buddies with digital servos as they are thirsty little buggers. These are sometimes refered to as glitch brsters.
@andy5716711 ай бұрын
correct and its due to his incessant habit of quickly jabbing the throttle while running ,,its cause by quick intermittant demands and releases of power from the esc...he does it several times in the video
@madsrcbuggy3 жыл бұрын
I've had excactly that issue, I recognised it right away when seeing your car get slow. I swapped motor and ESC twice, same issue persists. But this, this is really good info! Thanks for taking the time to document it, now I need to go do some shopping.
@hardcoretam5 жыл бұрын
I soldered a BEC onto mines to use in my crawlers and they work great. Smooth throttle control, cool running, 100% water proof and strong drag brake. I bought some to use on old Tamiya bashers so will see how i get on with them using both 2s and 3s lipo
@Freddie44utube2 жыл бұрын
Adjustable spanner trick! 👍 you’re never to old to learn something… thanks once again for your content
@finalldrive19605 жыл бұрын
Oh know I’ve just brought a 17t motor as it kept going into limp mode on a brushed 15t motor, I wish I saw this video last week 😟👍🏻
@benjimandover80723 жыл бұрын
Great fix...I was running my grasshopper 2 with the 1060 on 2s...kept doing limp mode...now its fixed
@FastFreddyRC2 жыл бұрын
Great info! I just ordered a 1060 and didn’t know there was a problem with them. Now I’ll know what to do if I get the same issue.
@ShenRC5 жыл бұрын
😁👍It probably made the voltage not dip as much... when running a hot motor or over geared car it can draw a lot of current and if your battery packs are not good enough to supply the amperage to the electronics the voltage can drop and cause those glitch power drop outs. Did you ever try another lipo a higher C rated one?
@TAMIYALegends5 жыл бұрын
Shen RC Yes buddy tried various batteries and motors, it a common issue that’s talked about a lot on the Facebook group. It sucks really but at least now I have two working speedo’s 👊🏻
@TheOriginalGrumpyoldGamer2 жыл бұрын
Thanks for the video. I'm having a similar problem with my 880. I have tried reprogramming the ESC and tested all of the electrical components with no success. I was beginning to think I was crazy.
@Houleigan3 жыл бұрын
Thanks Glen! Just had a Hobbywing 1060 go into Limp Mode! Will order a couple up right away!
@davyarthurs3 жыл бұрын
Thanks for this. Been ‘Googling’ for a solution and came across your video. I only subscribed to your channel a month or so back, so obv missed it when you released it originally. Going to give this a go now as fed up with my 1060 cutting off at 4v per cell!
@cazarakable4 жыл бұрын
Hi, thank you for this , this is a great fix, just so you know I just put 2 1000fu 25volt caps inline and did the same trick. Sad you have to fix someone else problem.
@TAMIYALegends4 жыл бұрын
cazarakable Excellent glad you got it fixed my friend 😊👊🏻
@ayebee12073 жыл бұрын
Capacitors?Mind your ESR. Equivalent series resistance
@stur19835 жыл бұрын
Glad I have seen this message, just bought a 12t motor for it to go in a 2nd hand strada. New to rc world so not a clue why, thought it was either getting too hot (not cutting out) or nimh battery wasn't good enough to run the 12t. Upgrading to 2s lipo so will do this mod at same time. Great advice and 1 new sub 👍
@skagerstrom5 жыл бұрын
Clever thing with the wrench! I hate soldering Deans as there's noting to hold on to :P
@nickrobertson24504 жыл бұрын
Not had this on a 1060 but I have a Hobbywing 10BL120 sensored brushless that at first I thought had an occasional intermittent fault, which became more regular until eventually it became unusable. It does exactly the same 'safe mode' thing you demonstrated. I run an 8.5T with a 5000mAh nimh or an 8.4V nimh. My guess was the batteries couldn't provide the required discharge current (what is the C rating on a nimh anyway?) & I needed a 2s lipo (I have no lipos yet). So I just set it & the motor asside for now. This esc has the 2x 16V 470mF cap module connected to the battery leads already. Humm. Does this mean I need a replacement cap module or the 4 cap module upgrade? I don't know but I think I shall try both & see what happens! Better than leaving it in a cupboard Wow amazing! Great tip, cheers mate!
@CmwSpeedrunUk5 жыл бұрын
My hobby wing 1060 esc came today all up and running thanks mate 💪🏽
@TAMIYALegends5 жыл бұрын
CMW Chris woodward awesome 😎🚗💨💨
@ValleyRC4 жыл бұрын
Just in case anyone reads this, the knock off one has red and black motor wires and if you look just to the right of the little instruction panel that tells you what the jumpers do, you'll see a little opening on the Genuine branded and RTR version but the clone doesn't have that opening. For what it's worth, I've got on ok with the 3 fakes I have but anyways, that's how you tell them apart from what I can gather.
@arcaderacer586 Жыл бұрын
I only have this limp mode issue on 6 cell nimh. 7 cell nimh and lipos work fine. I assume the 6 cell nimh voltage drops as its running. I have 2 new traxxas 6 cell packs and both do it
@hybrid324945 жыл бұрын
good fix glen!! that is one thing I have never installed on my electrics, Hope I never have too. LOL.
@Littrell19664 жыл бұрын
If you put a Deans connector counterpart on your connector while soldering, it keeps it from letting the tabs move around if you accidently use too much heat.
@williamwagner5693 Жыл бұрын
Thanks for this! Hoping to be well chuffed after following your advice!
@darrengrimmer85415 жыл бұрын
That’s a great fix Glenn... lol it’s great to see my old blazing star kind of getting a run out on Tamiya legends!!!!. 😂😂😂😂😂😂😂
@TAMIYALegends5 жыл бұрын
Darren Grimmer Pmsl 😂 I thought you might enjoy that 😂👊🏻
@darrengrimmer85415 жыл бұрын
I do have to agree with you. The blazing star wasn’t the most attractive of body shells!!!
@kevingalea927 ай бұрын
That's too funny I could find that holds the thing I'm solding so I used a wrench as well and worked like a charm cheers brother
@scottbray30533 жыл бұрын
I thought about doing this for the same reason glad to see it works. As far as i know it's part of the lipo cut off mode it goes to limp mode when it thinks the voltage drop is to low but then runs forever in limp mode was really annoying when it was in my crawler it would never drain the battery low enough to hit the actual cut off in my crawler so dropped it in my wl car and it's still annoying so i will be doing this thanks for the video now i know it will work.
@bretmuckridge98344 жыл бұрын
Quality control on these Hobbywing WP-1060-RTR must be pretty bad. I bought two cars that both had this ESC and they both did this. I contacted the car manufacturer and they sent out a new ESC under warranty and it did the same. I bought the kit with the 4 capacitors on it and installed it on one of the cars and it works great. Just need to do this to the other car now.
@TAMIYALegends4 жыл бұрын
Bret Muckridge It really is poor Bret, so many guys I know have had this issue 😞 Thanks for watching buddy 👊🏻
@silverhaze913 жыл бұрын
Had the issue with a cheap ZEEE brand New 2S 50c lipo but not with a good quality Gens Ace 2S 50C lipo ! Seems it’s the effective drain capacity that matters
@steveclough67945 жыл бұрын
a good bit of info thanks for sharing
@finalldrive19605 жыл бұрын
Thank you for your help, unfortunately after purchasing one of these I had my fingers crossed and hoped that it would work, it works a little longer than before but still goes into safe mode. I’m banging my head against the wall and thinking about buying a brushless motor Combo as I find that this is a lost cause. Hopefully someone else has better luck👍🏻
@TAMIYALegends5 жыл бұрын
Finall drive Oh what a shame 😞 You’re the second person now to have tried it and not worked! That’s now five 1060’s that have been done and only three of them were successful! It’s such a strange issue and very frustrating. I really need to mod my 2nd 1060 and test it out 🙏🏻
@Nlangkirby135 Жыл бұрын
Does the length of the wire on the cap module matter? I have two 1060 esc, but I want the both esc to be as compact as possible.
@jennyetherington33264 жыл бұрын
Would this only be going into Limp mode on a quick Motor? I'm just using a Tamiya Torque Tuned & 3300 Nimh.. Just ordered this ESC and was pointed towards your Video.. Now bit worried 🙈
@1Stunna23232 жыл бұрын
Would a capacitor that you install in an open channel on your receiver work the same way? I’m not comfortable with soldering that’s why.
@gera84124 жыл бұрын
Hallo there..lil bit wonderin..how about your 1060 condition wright now??is it still runnin properly with the optional hoop up capacitor??is it still do the job?coz ive allready read the hobbywing double cap manual..that hoop up was build for the erzun and quicrun family..tx in advance..keep healty and happy..regards
@gera84124 жыл бұрын
Typo..ezrun and xerun
@TAMIYALegends4 жыл бұрын
ge ra Hey 👋🏻 Yes I’ve done two and both are still going strong 🚗💨💨💨
@gera84124 жыл бұрын
@@TAMIYALegends great..tx for your information..gonna try it latter on and posted the result..manny tx
@stathap3 жыл бұрын
I finally got together a Hobbywing Quickrun 1060, some decent 2s 4000 30C soft pack lipos, charged properly and thought….. we’re all good to go in my Lunchbox here; hotdog wheely machine time….. ran it….. and it went as limp as * after a minute. Thank you, thank you, for making this vid (and all your other vids and content for what it’s worth). I’ve got a module D in the post….. fingers crossed it fixes my power problems I’ll let you know in a day or so.
@stathap3 жыл бұрын
….. AND…. it works…. !!!!! I really love you Glen…. kiss kiss…. mwah😘
@stathap3 жыл бұрын
Burgers,Dogs, Soft Drinks and Munchies from Signal Hill
@jonathanhumphreys19714 ай бұрын
Hi is the THW-1060 -rtr esc the same as the hobbywing 1060 setup
@SamuelSutanto2 жыл бұрын
can someone help me. im having an issue about HW 1060 low voltage cutoff. Motor stops/doesnt work, ESC red light blinking. Im so frustated to solve this. So the problem happens, whenever my car is about to go interval of objects, (slow speed), the motor suddenly doesnt work. i read the manual, it says whether the battery voltage too low (below 6v) or check the cable solder onto motor. (just as you know, i did purchase some new batteries, but it doesnt solve my problem) also funny thing, everytime i cut the motor cable, and solder again, it works...but the problem happens again. by the way, im using 2s lip bttry 7.4 2000mah. so, this capacitor module kit does help? or should i get brushless motor? or should i buy new ESC?
@patrickwalker1254 жыл бұрын
I can't believe how simple it was to fix my 1060. Just leave the jumper on nimh and protection mode won't kick in. Using this on a979b with 3s 100c 1500mah. Good God is it quick. The damn tires almost pull off the rims.
@TAMIYALegends4 жыл бұрын
Patrick Walker Excellent I didn’t know that 😊👊🏻
@patrickwalker1254 жыл бұрын
TAMIYA Legends, yeah I spent hours racking my brain trying to find out what's going on. So, I'm like I'll just put the jumper back on nimh like it come out of the box. I was like unbelievable!
@gera84124 жыл бұрын
@@patrickwalker125 what kind of battery that u used when u change the switch to nimh..is it lipo or nimh??tx in advance..had a same problem here
@estegerset4 жыл бұрын
Just tried that, car worked normal.... But battery ballooned right after use. Not a good solution
@jtsn6673 жыл бұрын
Can you still use 2s lipo on the nimh jumper?
@warwickeioncampbell47374 жыл бұрын
Could it have been the amp draw from the motor and servo? I have one 1060 and about 3-4 1080 esc. I use the 1080 in my crawlers because of the programability. I may use the 1060 in the attack fighter I have just ordered. I have not decided yet if I will go brushed or brushless.
@306s162 жыл бұрын
Ok, so iv just bought one of these but not fitted it yet. My question is, if its a known issue and Hobbywing sell a fix for it, why dont they send the fix out for free, fit the fix at the factory or just send it back?
@JeffersonHumber3 жыл бұрын
Could you of soldered the capacitor to the Deans connector with the battery wire? Would that work the same?
@NordicRC5 жыл бұрын
Congrats. Always so rewarding when there’s success. Got a 1060, but I haven’t noticed any issues so far. So ‘Limp mode’ just means that it slows down?
@TAMIYALegends5 жыл бұрын
Nordic RC Visions It’s some voltage cut off apparently, but the extra caps keep it from spiking under power 🤷🏼♂️
@NordicRC5 жыл бұрын
I do not have any technical/electrical knowledge, but it is strange with a brand like Hobbywing. But good job on fixing it ☺️
@schuttrostig57295 жыл бұрын
did you change out the tamiya plug on the other unit as well? Cause the tamiy plugs could give you problems as well, specially once they get a little worked out. check temp of the plug as well.
@TAMIYALegends5 жыл бұрын
Schutt Rostig Yeah I swapped them over to Deans on all my stuff now buddy 👊🏻
@glo516 Жыл бұрын
Thank you for your video. I'm trying to get back to life my old Tamiya Grasshopper of 1985. I then buy different part (NIMH 7.2V 6800mAh + motor 35T + Quirun1060 + dumboRC-X6) and when I start it, and go forward the car starts and then stop and then start, ... It seems that the whole power supply is cut for some milli second and then comeback all the time. Do you think it could be the same problem? thanks?
@rideon365 Жыл бұрын
I have the same issue. Did you ever find a solution for your car?
@RCModSquad4 жыл бұрын
Nice easy and cheap mod. 💯👍🏻👍🏻
@TAMIYALegends4 жыл бұрын
RC ModSquad Thanks for watching buddy 👊🏻
@RCModSquad4 жыл бұрын
TAMIYA Legends absolutely. I just picked up this ESC for a different car. I’m just trying to get an overview on it. Thanks for sharing.
@kodak_jack3 жыл бұрын
I have a WLToys 12402-A that came with a 550 motor. It is a HUGE boost in speed from the old 540 motors. I installed a 1060 and other components to change it to separate components. Just as a visual, without a GPS speed module, the 1060 has knocked back the speed by a good 25% or more - it sucks!! Maybe the Cap Module is what it needs.
@Muldrix19783 жыл бұрын
Great video, thanks! My car is slow on top speed, slower then others on the circuit. Do you think this help? Stay safe✌️👍👊👋
@NewLifeeight Жыл бұрын
Will it run an 8 turn motor? I'm finding it impossible to find a brushed esc that'll run under 10 or 12 turn.
@ZulMasriAl-Kampary4 жыл бұрын
I've got a 1060 brushed esc from my friend but it can't run reverse, when I push the transmitter trigger to reverse it's run forward and when I pull the transmitter trigger to forward it's run forward. Anybody know where's the problem?
@ayebee12073 жыл бұрын
Your jumper for mode on the esc. F/B/R. FB/RV? Or since you didn't say what radio your using, the presets on your Xmiiter? You may have throttle/trigger reversed on your Xmitter. Some Xmitters can be set to "Double tap" for brake. Sounds like that Mate.
@mikestride40432 жыл бұрын
Ever figure it out?
@aceUPchristian4 жыл бұрын
hello. it says on the packaging 10BL60. so the capacitor is for a brushless but we will install it in a brushed 1060 esc? please let me know. i have 2 unit of 1060 brushed esc and both goes to limpmode in any motor.
@dannys09783 жыл бұрын
Thank you so much for this video, seems to have sorted the issue I was having
@TAMIYALegends3 жыл бұрын
Excellent 😅👊🏻
@Mark_51504 жыл бұрын
I have a 10BL60 sitting here new in the box, it doesn't have capacitors on it, is it going to have the same issue or is it different than the 1060? It's the brushed ESC that has the issue?
@TAMIYALegends4 жыл бұрын
Mark G Yeah I’ve not heard of it happening in any other speedo 🤷🏼♂️
@Mark_51504 жыл бұрын
@@TAMIYALegends Sorry, I didn't realize how old this video was. It showed up and I thought it was a new one. :)
@peterrenaud96394 жыл бұрын
The spec on the 1060 says; 2s lipo or 6nimh- 540 motor with greater than 12t or a rpm less than 3000. Going outside these specs ruins the capacitor over time. So, were you going outside those specs and the problem arose then or did you have this issue anyway? I ordered a 1060 anyway and I am not sure if I should modify it right away. Love your channel!!!
@TAMIYALegends4 жыл бұрын
Peter Renaud No unfortunately they pretty much come like that, not all of them but a few 😬
@peterrenaud96394 жыл бұрын
Thanks, I will order the mod prior to first run. P.s. I also ordered some custom decals from mci. awesome recommendation, under $10usd for top force!!!
@calinthematrix5 жыл бұрын
Man, wish I saw this before I tossed two of my 1060s in the trash! It's weird, I have about 7 of these in different cars and two went to this limp issue. I tried everything: batteries, motors, temperatures, gears, etc. Then, when I swapped it out with another 1060 it ran fine. Oh well, live and learn. Other than this bug, the 1060 is a pretty good unit. My goto for all my brushed cars.
@adlernelsen712 Жыл бұрын
What battery were you using for this
@joshblass99465 жыл бұрын
Is there a way to test these 1060 ESC'S with a multimeter to see if they are healthy or dead? Mine doesn't go into limp mode it just flashes red like it's not paired with the receiver/transmitter setup. I've paired them as per the manual but has done this since I connected a 3S Lipo to it (I didn't connect the balance lead into the receiver)
@TAMIYALegends5 жыл бұрын
josh blass There probably is a way to electrically test it Josh, but I wouldn’t have a clue how to do it! Sorry buddy 😞
@joshblass99465 жыл бұрын
@@TAMIYALegends thanks anyway mate. Same question goes for a receiver, anyway to test to see if it's fried other than trying a healthy one ?
@TAMIYALegends5 жыл бұрын
josh blass Tbh Josh, I’d try another one 😬
@darthnagus54575 жыл бұрын
Great vid.
@operation11charlieinc5 жыл бұрын
Got one of those,,, works awesome
@brucebenner76064 жыл бұрын
i found out why it keep dropping down in power if u put a 550 motor to this the motor will drain the power faster out of the esc thats makes it slow down too thanks mate
@timtheveg3 жыл бұрын
Did you pop a cap kit on the ESC that "Limped" and go out and re-test it?
@TAMIYALegends3 жыл бұрын
Yeah I’ve done a couple now Tim, it’s not a 100% fix! Some guys have done it and it didn’t fix the issue 🤷🏼♂️ But mine were all good after I did it 😊👊🏻
@timtheveg3 жыл бұрын
Tidy. I've got a 1060 in my Axial SCX10 that started behaving strangely so I'll get a cap pack and solder it in.
@CmwSpeedrunUk5 жыл бұрын
Hi big man , just brought another 1060 for my 12 t motor running a 2s lipo and keeps cutting out the one on my lunch box don’t do it do u think this is the problem with my car
@OswaldBeef4 жыл бұрын
CMW Chris woodward I thought then1060 was only good down to 17 turn and advertised 20 turn. Is 12 turn not too low maybe
@CmwSpeedrunUk4 жыл бұрын
Oswalds Reef I think your right Oswald reef , I was king out my mind trying to sort it , I run a 17 now just about works well 💪🏽
@fabrizioviscardi405 жыл бұрын
Interesting job!
@vinanderson25353 жыл бұрын
Any idea how to disable the low voltage cut off on this esc. So tired of half speed after 15 mins on a 2s lipo.
@SamuelSutanto2 жыл бұрын
same thing happen to me. im tired of low voltage cut off. motor suddenly stops!! and all i do is cut the motor cable, and re-solder to esc cable...everytime.. im so frustating right now
@1114mat4 жыл бұрын
Now I’m worried, I just brought two 1060 off eBay 😱😱😱
@TAMIYALegends4 жыл бұрын
1114mat Don’t be, I believe this isn’t a common issue 👊🏻
@1114mat4 жыл бұрын
TAMIYA Legends ok thanks 😊
@brucebenner76064 жыл бұрын
hi this is happening to me i put the cap on like u have done and still going to limp mode after 5 mins i then put the jumper to nimh battery and going good no limp mode did u change the ecs to nimh when using lipo battery i know u should not do this but have u tried this before putting the caps on? please try thanks let me know thanks u should have a donate button u help me out heaps ... worth thinking about
@TAMIYALegends4 жыл бұрын
bruce benner Oh wow no that’s new to me buddy 🤔🤷🏼♂️. I’ll have to have a play with that next time 😊 I have Patreon set up and my email in the about section is my PayPal. Glad you found that 👊🏻
@patrickwalker1254 жыл бұрын
Dude, just put the jumper on him and it will not kick in. Just watch your voltage on the Lipo though
@patrickwalker1254 жыл бұрын
Nimh
@brucebenner76064 жыл бұрын
@@patrickwalker125 hi thanks i out the lipo setting back but it drops down in power i do have a cap installed do u think i need 2 installed?
@patrickwalker1254 жыл бұрын
bruce benner I would remove the capacitor
@naturalsound81574 жыл бұрын
I have old hbx bonzer, now the car has traxxas 12t 550 motor and Hobbywing 1060. It goes limp mode after 10sec, i did this repair with Hobbywing capasitor module and it did not work. Still goes to limp mode. :(
@jtsn6673 жыл бұрын
Same exact setup and issue
@reddeerrebelrc66745 жыл бұрын
Ok, so why didnt you just connect the wires to the deans ?
@brucebenner76064 жыл бұрын
they say connect it closest to the esc for best performance not away from it
@OswaldBeef4 жыл бұрын
How can I adjust the brake % or do a reset on a 1060?
@TAMIYALegends4 жыл бұрын
Oswalds Reef That’s something I’ve never done on a 1060, tbh I didn’t know you could 🤷🏼♂️
@OswaldBeef4 жыл бұрын
@@TAMIYALegends thanks for reply and I guess you've helped me confirm that, you cant. I solved my issue....I had my reverse endpoint set what i thought was perfect....turns out reducing reverse endpoint actually also reduces your max brake signal too. Crucial on a crawler
@backyardr.c.channel47324 жыл бұрын
MAN I WISHED IT WORKED BUT FOR ME IT DID NOT WORK. RUNNING THE 1060 IN THE WLTOYS 144001 AND EVEN WITH THE CAPACITOR KIT WITH IT A MINUTE IT GOES INTO LIMP MODE
@TAMIYALegends4 жыл бұрын
Micro Drone Channel Yeah since this video a few guys have said it hasn’t worked 😞
@patrickwalker1254 жыл бұрын
Put jumper back on nimh
@jtsn6673 жыл бұрын
Yeah I did the same and no luck
@aldoussantiano79663 жыл бұрын
@@jtsn667 sorry to hear that. Mine goes to limp mode too. But when I switch the settings to NiMH and plug a Lipo evrythings good
@ISOSAILING4 жыл бұрын
wish i seen this before i got one mine is doing the same only got it coz everyone was saying it so good it's a crock of sh**t if you ask me and again it's only the 4th esc i've try'd to get my car running with looks like i'll haveto try the mod then!!
@linlinlixin26374 жыл бұрын
I just installed mine, it is really slow on reverse, it takes 2 to 3 seconds to react to reverse, when i adjust the forward throw on the control it moves forward just fine when i adjust it barckwards it wont move at all. I am frustrated 😫
@TAMIYALegends4 жыл бұрын
linlin lixin Hmmm 🤔 Have you got the two plastic jumpers in the right place for the battery and setup you want?
@linlinlixin26374 жыл бұрын
@@TAMIYALegends yes i do. I tried it on another transmitter and receiver and same thing. I reversed it on the transmitter and its slow forward. I tried another motor and same thing. I switched the channels on the receiver and its still the same.
@DarkKent4 жыл бұрын
linlin lixin I don't know why but it's doin it when both pins are in correct. I has to sac the break for the time being. When I take out the jumper for it and leave f/r, reverse runs fast. Beats me.
@TestTubeBuddies5 жыл бұрын
Hi, I was wondering if you could answer a quick question. The Module Kit in your video has two Capacitors, well i found the exact same one or it gives me the option to have 4 instead of two capacitors, I just want to know would this be ok ?
@TAMIYALegends5 жыл бұрын
Tony MacDonald Yes I debated buying one of those too, unfortunately I have no idea if it will work or if it would have a detrimental effect on the performance 🤔
@TestTubeBuddies5 жыл бұрын
I can't see it hurting it, But I have ordered one and I will be trying it :)
@TestTubeBuddies5 жыл бұрын
I plan on using mine in an old H2 Hummer from radioshack.
@VoidXRC5 жыл бұрын
nice mate
@andy5716711 ай бұрын
the damage to the esc is his bad habit of constant jabbing of the throttle while underway the capaciters make up for the incessant throttle jabbing ..so problem fixed ,,but the habit is not...it like jabbing the throttle pedal on a real car while driving ,,,something is going to ventually give out
@ariewildan27033 жыл бұрын
Mine runs just fine for about a month, now it doesn't even recognize 2s lipo, no beep sound, no throtle! Motor is fine, checked by running direct to battery, any idea what's causing this? Is mine broken? led lit up when I push throtle, yet motor is not running! Somebody please help ...
@scannaunderscore15 жыл бұрын
one day you might put a fast motor in one of those cars
@rickygoss48044 жыл бұрын
What is limp mode do to car
@TAMIYALegends4 жыл бұрын
Ricky Goss It’s when the ESC cuts out and goes to 25%
@jtsn6673 жыл бұрын
I just done the same thing and didn't solve the issue....
@bradvdb41365 жыл бұрын
I use those speed controllers they have motor rpm limit don’t go over it they will go into limp I’ve had this happen to mine that’s what I figure .Those speedos are really for mild modified motors but mostly stock .
@TAMIYALegends5 жыл бұрын
BVRC They have a 12 turn limit buddy, but as I said in the video that has nothing to do with this issue, I couldn’t even use a basic Sports Tuned motor before I found this fix 👊🏻
@bradvdb41365 жыл бұрын
Great videos buy the way love your channel , and I’m glad you found the solution ,happy R.C.ing!!
@TAMIYALegends5 жыл бұрын
Brendan Raymond 100% agree buddy 👊🏻
@davidturner23655 жыл бұрын
Quality !
@nielsmolendijk70733 жыл бұрын
This didn’t work for my 1060
@angelodedios80254 жыл бұрын
It's so easy to open the casing of the 1060 and I would recommend soldering direct onto the board and not splice open the wires. Frankly, that's the lazy method and doesn't look neat at all.