Hobbywing Ezrun Max10 SCT what you get?

[@ksrnate]

I love hobbywing stuff. I bought a max10 for my big rock and that mounting plate they give you is a direct fit inplace of the blx100 👍🏻 I advise fitting the cap pack too dude even if you just run it on 3s. I've since replaced that for a 150amp xr8 plus hobbywing the sensored one and I've got a 6s rated sensored motor. Only coz I hate waiting for shit to cool down. I wanna bash till the battery dies not stop every 5 minutes when it overheats 🙄

[@mehimrc1314]

Right bro, I'm glad I pointed the cap pack out now haha. As a channel that likes issues I'll pass and fit the cap pack. Don't fancy this ESC going up in smoke for the money, you hate waiting I'd never of thought that about you dude. Thanks for sharing your advise this will help more than just me in sure.

[@patmarcus172]

Really helpful to know mounting plate is a direct fit as I’m not great at RC surgery. Interesting comment on the over heating. I had heard the stock fan on the 10sct should really be upgraded for 4s use.

[@SpeedSyko]

Great video!!! Can’t wait to see the speed monster go!!!!!!

[@mehimrc1314]

I don't think it'll be any faster than stock, motor is 3200kv. Only difference is the ESC being 120amp not the blx100amp. Do you think there will much of a difference?

[@NoLimitRC87]

I've just got this after watching your review going to stick it in my lc racing lancia delta 👌 awesome review buddy and thanks for doing it

[@mehimrc1314]

Cheers dude hopefully I haven't done you wrong. I personally like it and I'd definitely get the program card, makes things a little easier.

[@RUZTY1311]

Big help I should have just looked up the manual to see where to solder on that cap pack! I will be doing that Asap with my new ESC 👍

[@mehimrc1314]

It's recommended to fit it, so why doesn't it come fitted? That's my dumb response to the Manual 🤣 glad it helped

[@RUZTY1311]

@@mehimrc1314 True true!

[@robsrcinsanity1220]

Looks like a very nice set up! 👍🍻

[@mehimrc1314]

Its a sexy looking bit of kit, let's hope it drives aswell as it looks.

[@patmarcus172]

Be really interesting to hear how it goes in the Typhon. My max10sct is going in a Vorteks.

[@mehimrc1314]

I'm sure this will be a direct fit, will it make any differenc in the drive of the car? That's my question, find out soon. Thanks for commenting hope your liking your vortex.

[@triple6rcs18]

Looks naughty bro ..get a game changer fan to keep that motor 🧊 cold ... the extra packs are sweet too man . Build on my son build on hehe

[@mehimrc1314]

If I had the spare funds I'd maybe get a game changer fan but why over complicate things. If they were simple and cost effective sure but it's a fan stupid money for a fan bro.

[@triple6rcs18]

@@mehimrc1314 I'd just wanna keep her chilly hehe

[@mehimrc1314]

Hell yeah I'll definitely be looking into something for it bro.

[@DimiS1978]

Thats 48p. I bought the same kit for my Traxxas Rustler, it meshes perfectly with my 48p spur. Still haven't ran it yet though, car is not finished yet.

[@mehimrc1314]

Well thank you Dimi, that's answered my thoughts on the pinion. So it's a fantastic little package for anyone who has a 48DP Spur set up. Thanks for commenting dude.

[@robertward5047]

Do you know if there is any way to get the esc plate on its own. I've lost mine and have tried looking online but can't see it anywhere.

[@mehimrc1314]

To be honest, No would be the answer. Make a paper template and do one yourself is my solution.

[@samcourtrc6767]

Awesome bro that should go

[@mehimrc1314]

Cheers bro hopefully I won't have to worry about the motor bearings blowing on me once this is fitted.

[@samcourtrc6767]

I here good about them bro should be all good bro

[@ulikemytubez]

What pinion did you end up with?

[@mehimrc1314]

Stock 15T

[@durrellglenn6545]

DOES THE MOTOR MAX10 SCT GOT MORE POWER THEN THE TRAXXAS VELINEON VXL S3 MOTOR 3500KV

[@mehimrc1314]

Since I don't have that motor I really can't saybsorry dude

[@jahuuunior]

Is that a Steele pinion?

[@mehimrc1314]

It's metal 👍 48dp

[@rcstuff6547]

Just ordered one of these

[@mehimrc1314]

Great piece of kit

[@samuelandolina6338]

What is the motor leads lengths?

[@mehimrc1314]

About 40mm or so.

[@BIGALSCRAWLERS]

Hold up, what's goin on with ur thumb? Wen I c it I thought ur thumbs looks like rubber then u said about it lol, u can't go wrong with a hobbywing motor and esc they in my opinion r the best

[@mehimrc1314]

Pmsl I cut it in half, up the middle. I've got nerve damage. The plastic prosthetic thumb was a gift haha helps keep me in the game. Honestly can't wait to get it all fitted and programmed blx ESC is in the cheetah. Hopefully I feel the same about hobby wing.

[@BIGALSCRAWLERS]

@@mehimrc1314 I think its brill, mine that's a kicking and it's all good, one I had to send bk but that one was sorted under warranty

[@mehimrc1314]

I've seen people are happy with customer service ect let's hope we don't need it haha. Cheers bro support means alot.

[@BIGALSCRAWLERS]

@@mehimrc1314 mate u r like me in so many ways lol just with out the beard ha ha ha

[@mehimrc1314]

Lmao dude your 💯% legit!

[@gmcevoy]

Holy crap, that is a BEAST of a combo! Regarding pinion pitch, I have a gear tooth pitch gauge, which cost about £5. You are sure to find one in a tool shop. One that sells tools for lathes, mills and whatnot. Highly useful piece of kit, you would make good use of one, I am sure. Otherwise, if you don't know about it already, here is a useful link to a pitch calculator. www.radiocontrolinfo.com/information/rc-calculators/rc-gear-calculator/

[@mehimrc1314]

I didn't get notified to this comment god dam KZbin! Thanks very much I did not know such an item existed. Thanks for the link