Hobbywing Multifunction LCD Program Box Pro

[@aqualungs77]

Sound is perfectly fine!

[@CyclingMikey]

I've noticed in the last few videos that your sound levels are lower than other videos. Hope that helps you...

[@RCVideoReviews]

I'll crank the mic up a little.

[@shahram677]

I had an unsuccessful firmware update and now can't connect to esc anymore. I was wondering how you fixed yours.

[@tubamanandy2]

I'm guessing this only works with Hobbywing ESC's ?

[@RCVideoReviews]

I haven't tested with others, so can't say for sure; however, my assumption would be yes--hobbywing.

[@joemusto5674]

I have two different Hobbywing programmers (the Hobbywing Program Card and the Hobbywing Multi-Function Program Box). Neither will program all Hobbywing ESCs but rather each works on specific Hobbywing ESCs and there is no overlap. Does this box work on all Hobbywing ESCs? If not, which does it work on? Thanks for your videos. They have been super helpful, especially the Radiomaster and Edge TX series.

[@RCVideoReviews]

It's not for the entire line. Specs: Platinum series of brushless aircraft ESCs, XeRun & EzRun MAX series (V2.0 and later), Platinum and SEAKING PRO series. This device also work with some ESC of QUICRUN series.

[@joemusto5674]

@@RCVideoReviews Thanks! I wish they would standardize. It's one thing to have a programmer for each mfr but to need 3 or more for a single mfr is frustrating. Keep up the great work! Your channel is an asset to the community!

[@jas-FPV]

Program cards, boxes, interfaces are the scourge of the hobby ! Every manufacturer could give out an Esp32 or RP2040 sketch for DIY and open their protocols Doesn’t mean they can’t offer their crap gizmos new every year but at least the user would have a choice 🤬

[@RCVideoReviews]

I have an annoyingly large collection of programmers. We need a universal translator.

[@jas-FPV]

@@RCVideoReviews 100% And often these are not more than a standard USB to serial CH34 something chip with a 3 wire uart….

[@felipejose3321]

Phellipe: to enrolado ate o pescoço] Phellipe: atualizei meu radio pra umal tima versão v2.10.3 atualizei o cartao sd. com a mesma versão , mao não consigo carregar os arquivo, na aba extresslrs e tambem a pasta do cartao script lua tambem não carrega espero que alguém me ajude a solucionar .etou usando um radiomaser boxer um módulo lrs EMAX 2.4G externo um rx nammino 2.4 g

[@old-rcplane-phart]

👍🤪

[@Vinrx7]

This box is useless. Its just another excuse to sell a device. All the features should be possible with a pc. Its been glitchy for me. Using hobbywing 80 esc and this box.

[@ace-gc5xm]

yeah cant hear much