Holley Hi Ram Manifold Install For Your HEMI Powered 4th Gen RAM 1500

In this video we install the holley hi ram manifold on project storm the torqstorm supercharged 2012 ram 1500 4x4.
www.holley.com...
for the best engine oil and fluids from amsoil purchase here www.amsoil.com...
for cool tee shirts and merch check out the store
teespring.com/...
also follow on
instagram@frostbite_ram
facebook@frostbite ram
frostbiteram.com/
for the best mopar transmissions and parts
www.coperacing...
/ coperacingtrans
for quality superchargers www.torqstorm.com/
Tuner and camshaft I use
frptuning.com/
For the best exhaust
www.karnageper...
troysmuffler.com/
nitrous kit I use
www.nitrousexp...
www.spelabauto... for great exhaust cutouts and more
superclean.com/ for great degreasers and cleaners
camera I use
Canon EOS M50 with RODE mic
S22 Ultra phone
gopro hero 5 session
runcam 2

[@FrostbiteRam]

Thanks for the awesome support mopar fam project STORM looks completely different now😲.

[@ojo3925]

How many studs did u need to install. I’m in the process of wanting to put one on but I want to know if I have all the studs

[@coperacingtrans]

That's awesome. I just ordered my torque storm blower for my Hemi

[@FrostbiteRam]

Oh yeah Mr hanney going to fly

[@MRGibby-xr8je]

can't wait to see what storms does in the 1/4 mile 😶‍🌫

[@FrostbiteRam]

Me to💪

[@brendonlandon9193]

Can’t find part , part number ? Thank you for IET sensor

[@nightraver7926]

Thanks for the informational video it’s looking good! I also hear a celebratory drink being cracked open after a job well done @23:52 😀

[@FrostbiteRam]

🤣💪Definitely

[@nightraver7926]

@@FrostbiteRam btw do you know where else they sell adapter throttle plates for the stock TB, ordered mine from Holley last year and now their saying I have to wait till may of this year? Thanks!

[@nightraver7926]

@@FrostbiteRam what map sensor did you use? The 2014 5.7 hemis don’t have screws that hold the map sensor, just twist and locks, thanks!

[@shawnbruman]

Thank you again for sharing so much knowledge with the Mopar Family!! What did you end up doing for handling the purge control valve?

[@julio2869]

does anyone know where to put the evap canister hose that goes to the manifold near the throttle body, not sure what to do with it or where to put it

[@johnnywhite238]

🔥🔥🔥RAm going be badazz

[@erikturner5073]

I always liked the tunnel style intakes on EFI engines. They look the best in my opinion. 13.60's is bad at all considering how heavy that truck is. I think stock they run mid 14's if I'm not mistaken.

[@stormram2783]

Stock mine was running 15.8

[@erikturner5073]

@@stormram2783 the Hemi trucks quarter mile times varied depending on weight and package.

[@stormram2783]

Yeah i got the heavy 4x4 crew cab with towing pckg

[@PabloHernandez-uo2xg]

What’s the T barb part number u used

[@thewallabyedits6403]

What did you do with the short runner valve control ? Does the IAT need to be installed for an NA engine ? Do I need a new map sensor or will the oe work ?

[@porfiriorodriguez3867]

and to connect the valve actuator to the Holley intake with which

[@raheemtucker9722]

I know this is old but I have a few questions: 1. You used a 2 bar map sensor with this application, but I thought it was supposed to be a 3 bar. Is it part # 5033224AB? 2. Is it possible to plug up the spot for the IAT sensor on the back of the hi ram, and run the IAT sensor before the throttle body instead?

[@FrostbiteRam]

You can use either. I currently use the 3bar

[@doughboyeric1484]

Iet sensor part # plz?

[@gilhernandez605]

What year Cummins IET sensor?????

[@jeepwk6.5L]

Dang that looks good

[@FrostbiteRam]

Thanks

[@jeepwk6.5L]

@@FrostbiteRam np, now I need one haha

[@hellcatd4721]

Did you not have to install a return fuel line for your application. I have a 73 Plymouth I swapped with a 64 and I’m using the same intake trying to do research on what fuel pump I need to run and if it needs to have a return fuel line thanks.

[@FrostbiteRam]

@hellcatd4721 no this is using the stock fuel system and line. Now on my racetruck frostbite that has a fully fabricated fuel system with return.

[@hellcatd4721]

@@FrostbiteRam should I run a return and regulator

[@serch2978]

I need help for a N/A application 6.4L hemi charger installing a holley hi-ram

[@FrostbiteRam]

Definitely will need a different hood most likely to start with.

[@serch2978]

Oh I have one killer bee in carbon fiber' I need to figure out the plumbing part for me' I'm having high oil pressure and it's finding its way out through the seals leading to gunk in the valves and head ports

[@tristongeller6241]

What are the part numbers for the fuel rail plug and the swivel fitting for factory fuel line?

[@FrostbiteRam]

Everything is in the video

[@gerr35]

Quick couple of questions on that manifold I just bought all you said to get can't wait to install it Will this send a check engine light will I need a tune after this installation and where did you get the oil breather and fitting from for.the manifold

[@FrostbiteRam]

You will need custom tuning to eliminate the cel.

[@chrisd2486]

Looks awesome how much horsepower will it make ? And does it set off any codes or change the emissions. I live in Massachusetts we got strict inspection laws. Again love the look it's awesome

[@FrostbiteRam]

It will set off some codes that custom tuning can turn off

[@chrisd2486]

Cool thanks

[@pedroramirez6444]

Hey, quick question how do you install the Holley hi ram on a NA build

[@FrostbiteRam]

Same way really not much different

[@daltonmorgan8098]

Can I put a Holley hi ram on my 2009 4.7L ram 1500??

[@FrostbiteRam]

For 3rd gen hemi

[@markd1199]

Hey!! I will buy that intake if you may ship. Let me know. I am getting that active short runner error on mine. Thanks!

[@FrostbiteRam]

The Factory manifold?

[@markd1199]

Yes sir. Let me know if worth you fooling with. I can message you on FB if possible. Thanks!

[@541Shield]

will this fit on a 5th gen 5.7?

[@FrostbiteRam]

Yes

[@So_cal00]

Ive seen alot of guys run the 6.4 intake, do you think the hi ram would have better results?

[@joshkrause2977]

The high ram intake makes it power from 4k to 7k rpm, unless you drag your truck it will suck for street driving.

[@FrostbiteRam]

Yes I believe so. I've seen it on a fairly stock na 5.7 with cam and daily use was unnoticed but track was better overall.

[@kenc.2448]

Hi, just wondering. Working on getting FRP cam and tune. Previously had Greene tuning. I’ve rebuilt bottom end. Looking to go from 7psi to 10psi from procharger on 06’ ram. Did you use the timing chain. Felpro head gaskets and head bolts that came with kit or, did you go with cometic head gaskets and ARP bolts? I’m close to buttoning up and looking for suggestions before I make the leap. Any info is appreciated.

[@FrostbiteRam]

The supplied gaskets and hardware work fine in the kit

[@kenc.2448]

@@FrostbiteRam yes but what head gaskets and head bolts did you use on your application?

[@FrostbiteRam]

@kenc.2448 I have factory mopar gaskets currently from my last cam change

[@kenc.2448]

@@FrostbiteRam thank you sir.

[@kenc.2448]

@@FrostbiteRam I’m sorry, did you use oem head bolts or ARP head bolts?

[@angelsimental6665]

I have a 2016 ram 5.7 omly thing I’ve really done to engine is a k&n air filter but if I want to instal a manifold like this what would be a good idea to start off first? I was thinking putting long tube headers with a cam but wanted to see anything else todo before running something like this any help would be highly appreciated

[@FrostbiteRam]

Longtubes and camshaft go well with the Hiram

[@NXT_LVL]

As I label my files during design/prototyping, "NFG" No Fkn Good

[@FrostbiteRam]

🤣💪