Holtzfforma G888 Part 2 Asembly By Dean's Woodworking

Holtzfforma G888 Assembly In this video I will assemble a Holtzfforma 122cc Blue Thunder G888 Chainsaw we will asemble it including attaching a 42" bar and chain. Links to the chainsaw and bar are below.
Thanks for Watching!!!
Website
www.deanswoodw...
Facebook
/ deansfinewoodworking
Instagram
/ deans_woodworking
The following links are affiliate links to items that I use in my shop.
Any potential purchasing or even clicking on these links will help support the channel
Making it possible for me to continue to create more content for you.
Many of these items you have seen in use in the videos.
SAFETY
Trend Airshield Pro amzn.to/3qD44sw
3M PAPR Respirator amzn.to/3w1Hc9j
3M M-407 Helment
Tools I use
3/8 Double end Ball Mill amzn.to/3mDhFie
Digital Caliper amzn.to/3tfAZp6
G888 Chainsaw amzn.to/3nvFMm9
Chainsaw Mill amzn.to/40S7Iis
CHUCKS AND MOUNTING
Bottle Stopper Chuck amzn.to/342ohjM
Nova G3 Chuck amzn.to/3zhBtgl
Nova Infinity quick change chuck amzn.to/3mEBKod
Oneway Talon Chuck amzn.to/3z1Jhm2
Oneway Stronghold Chuck amzn.to/3Hx4Q15
Oneway Live Center MT2 amzn.to/3quwu7N
Oneway Live Center MT3 amzn.to/3sThzXR
Irwin quick change bit holder amzn.to/3Aevid2
SHARPENING
Oneway Wolverine Jig amzn.to/3EABvAN
Ron Brown's Best Universal Setting Jig Lathe tool Sharpening amzn.to/3fZ
FINISHES
Min/Wax Antique oil finish amzn.to/3ExF36M
Mahoney's Walnut Oil amzn.to/3j7LepM
ADHESIVES
3M super 77 spray adhesive amzn.to/33NSYZE
E6000 amzn.to/3JI7P8t
Titebond original amzn.to/34cAwtY
Titebond II amzn.to/31qhOOy
Titebond III amzn.to/3HCTmsE
SUPPLIES
Bottle Stopper hardware Standing 10 pk amzn.to/3Jg4gGq
Bottle Stopper hardware Cone 6pk amzn.to/3HiqR3g
Ornament Hangers Silver amzn.to/31bwG3k
Ornament Hangers Gold amzn.to/32HcxCw
2" Round hook and loop disk amzn.to/3GIO6Us
Big Monk Lumber www.bigmonklumber.com
Sanding supplies
Vinces WoodNWonders www.vinceswoodnwonders.com
BOOKS
Book Classic Forms amzn.to/3z2AqQZ
Video Recording Gear
Blackmagic Design Atem Mini amzn.to/3JzLpqe
Cannon Vixia Camcorders amzn.to/3mM0JpD
Comica wireless Microphone amzn.to/3eFXEmy
Neewer Studio Video Lights amzn.to/3zfWJTv
HDMI Switcher amzn.to/3pH9Ee2
Logitech M705 Mouse amzn.to/3EKIHKS

[@jim9337]

That is a helpful vid, I am ordering the G888 tomorrow. Thank You.

[@valtersvidauskis3781]

Thanks Den, your video helped me out! Best wishes!

[@hayesrutherford9415]

Looks like a lot of saw for the money. Hope to see more of your woodturning videos in the future,

[@jackthompson5092]

A massive saw Dean.

[@DeansWoodworking]

Yes it is I can’t wait to do some milling with it

[@ronkiskowoodart9680]

Hey buddy its May 27 and haven’t seen any new posts in a month. I hope you are well and just ‘resting’ up for another super video.

[@DeansWoodworking]

I am doing much better and planing on being back in the shop this weekend.

[@scotttague2729]

Awesome saw 👍👍👍👍

[@DeansWoodworking]

Thanks 👍

[@garyp8471]

Hello Dean Nothing to do with saw's, I've hung off long enough, I was wondering where you at, it's been a long time 6 to 8 months, do hope you are still on the mend. Hope to hear from you. All the very best wishes from Lincolnshire UK

[@robertwhite537]

Nice saw Dean!! I can't wait to see your video using it 🙂

[@DeansWoodworking]

You and me both!

[@connecticutgunbench2231]

If you were staining wood with intricate inlays what spray stain would you recommend?

[@DeansWoodworking]

Sorry I don't use spray stain.

[@DougMilleratWoodSpunRound]

I’m going to assume that it will run as good as it looks. Time to put it to use slabbing a wet oak or maple log. That should be a good test. Glad you’re doing better.

[@DeansWoodworking]

That's the plan!

[@daniellegrandpa]

Looks like he is done

[@DeansWoodworking]

I will be back soon

[@emgiwoodworks]

Well Dean, there is no way around it now that you also show us how it cuts. 😎 Plenty of power for sure but also quite a bit of weight. Probably too heavy for cutting blanks but ideal for milling.

[@DeansWoodworking]

It is definitely for Milling. I would hate to have to use that beast to cut blanks or firewood.

[@glencrandall7051]

Thank you for sharing. Be careful with that new tool. It is rumored that they can be dangerous. 🙂🙂

[@DeansWoodworking]

Yes I have a great deal of respect for anything with sharp teeeth!!

[@waltlumley7379]

Dean how would you fix a tenon that was too small for the chuck when making a box

[@DeansWoodworking]

make a new tenon.

[@trurex007lee7]

All set to let it rip!

[@DeansWoodworking]

Yes Sir!!

[@rayphillips3534]

Dean, what is your status?is your health situation better? Hope you are back soon.

[@daniellegrandpa]

Looks like he's done with the channel,

[@DeansWoodworking]

Just a little health issues right now. Hopefully will be back soon.

[@DeansWoodworking]

@@daniellegrandpa I wish you all the best

[@jeffs5093]

Dean, can you give us an update on how you're doing with your health issues.

[@DeansWoodworking]

Better hope to be in the shop soon

[@firstfhingsfirstwithpastorjack]

Dean are you OK?

[@gregj2647]

Hey Dean. Hope you’re doing better. Any plans to start the channel up again?

[@DeansWoodworking]

Yes as soon as possible

[@victorluno2959]

Cuando menos sospechoso, un hombre mayor se compra una enorme motosierra, dice que va a hacer tres partes y hace la segunda y desaparece, habra pasado algo?

[@DeansWoodworking]

Health Issues

[@victorluno2959]

@@DeansWoodworking vaya, lo siento, espero que se recupere pronto, por lo menos me alegro que no haya tenido ningún accidente con la motosierra, que era lo que pensaba

[@tomjordan3326]

Hi Dean Been missing you. You ok?

[@DeansWoodworking]

doing better

[@rayphillips3534]

Dean are you OK? Miss your videos. Hurry back.

[@DeansWoodworking]

I have been having some health issues but should be back soon. Thanks

[@daniellegrandpa]

Be very careful🪚

[@DeansWoodworking]

Thanks I will!

[@mikel4510]

This is, apparently, Dean's last video as of 7/20/2024. Did he pass or just get tired of turning or posting?

[@DeansWoodworking]

@@mikel4510 health issues should be back soon

[@mikel4510]

@@DeansWoodworking THANKS for responding. I understand those issues. But gives me a chance to catch up. You're a good presenter and the content is 👍👍for turners with any level of experience.

[@daniellegrandpa]

What happened to Dean???????????//

[@DeansWoodworking]

Too much work and no time to play but that changed today will be posting soon.