Amazing factory! Process of Making Automotive Parts with Metal Scrap. Korean Steel Factory

[@jpwillm5252]

I have never seen such a clean and clear foundry ! Je n'ai jamais vu une fonderie aussi propre et claire ! 이렇게 깨끗하고 깨끗한 주조 공장은 본 적이 없습니다 !

[@Holy_Maker]

😉👍

[@PixelSchnitzel]

WOW! A clean, well-lit and maintained foundry . . . those people clearly take pride in their work. I'm very impressed.

[@Holy_Maker]

😉👍

[@fppenque]

The cleanliness of the foundry is exemplary.

[@RyanDavidHale]

0:18 - The Lego Man heads don't look too happy to be there! 😮

[@Patriarchy_69]

😂

[@ВладимирВладимирович-ы8ч]

Век живи, век учись. Всё таки что не говори а технологии с каждым годом просто удивляют.

[@raylamp4505]

Looks like they make their own scrap.

[@pyalot]

It is how steel is made. You melt it, pour it, scrap it and put it back in the melt.

[@raylamp4505]

@@pyalot thanks flo. From here at Cleveland Cliffs Cleveland mill.

[@jspark6351]

Some of scrap parts might be defect parts of their own after X-ray inspection.

[@raylamp4505]

@@jspark6351 thanks

[@jardel_lucca]

I was expecting all the produced parts to come back to the start so we'd have nice loop

[@돈의맛-e9x]

많은 주조 업체를 방문했지만 이렇게 깨끗한 곳은 처음이네요 잘 보고 잘 배우고 갑니다.

[@Holy_Maker]

시청해주셔서 감사합니다😀

[@L_sy3140]

경상북도 쪽에 주조공장 아시는곳 계신가요??

[@69-Dwayne_pipe]

What's that little nozzle thing spitting into downsprue? 3:46

[@잠시주차중]

자동차 디퍼렌셜 케이스 부품같네요 신기한영상 잘보고갑니다~

[@Holy_Maker]

영상 시청해주셔서 감사합니다.

[@phuturephunk]

Are those differential housings?

[@최현진-k3i]

어디에있는주물공장인가요 상호는요

[@우스우-v6y]

기업인이 애국자다.존경 합니다

[@kerjakeras65]

Pengecoran yang begitu bersih dan sangat bagus sekali...

[@shaunybonny688]

They have some really good dust extraction/ventilation. Nice new plant.

[@Holy_Maker]

🙇‍♂️

[@ROADKILL4147]

i love how all them parts get tossed around :)

[@바이오-c4q]

전기로와 주입기 작업자는 화상방지를 위해서 긴팔 작업복을 착용해야하며. 쿨링드럼 이후 작업자는 낙상 방지를 위해서 컨베어 위에서 작업을 하시면 안됩니다

[@petermescher332]

That is the cleanest, most well-lit foundry I've ever seen. Most videos of foundries look like you are working in the fires of hell itself. That said, I hope the workers have hearing protection you just couldn't see on the video, or every one of 'em are going to be deaf pretty quickly.

[@matthewzuleger4569]

cast iron not steel, square part looks like the case for hydrolic pump or motor.

[@jaakkosaha5787]

1:07 These look like finished parts. Why are they melting them again?

[@Holy_Maker]

If a small defect is found in the eyes of the examinee, it will be manufactured again. It was probably defective.

[@timbow50]

Wow! A real factory.

[@Evgenkr]

Отлично организованная литейка!

[@모라카노-k1e]

마지막에 에이프론 쇼트기계가 참 인상적이네요

[@chrissartain4430]

Great Videos Always !!

[@Holy_Maker]

Thanks😉👍

[@happymann839]

Ausgezeichnet👍👍👍👍👍

[@Holy_Maker]

🙇‍♂️👍👍❤️

[@happymann839]

@@Holy_Maker Dankeschön 👍👍👍

[@Imaginekor]

부품이 놀라면서 나오는 모습에 감탄했습니다

[@Holy_Maker]

헛 채널 아이콘이!😮😮😮

[@최수영-c1v]

녹을때 아이 윌 비 백 자막 넣어셨으면~~~

[@Holy_Maker]

Amazing factory! Process of Making Automotive Parts with Metal Scrap. Korean Steel Factory 1000톤의 고철을 녹여 자동차 부품을 만드는 과정. 한국의 자동화 주물 공장. 🎬 촬영 요청 및 문의 이메일 : [e-mail] ✅본 영상은 유료 광고를 포함하지 않습니다.

[@michaelorekyeh6431]

What are these parts?

[@an-sav98]

Не сказал бы, что всё автоматизировано. Полно людей.

[@user-fs3vh2qm5u]

А где зим анализ и почему литьё а не штамповка и что за дабавка как у Челентано плюнул и весь секрет

[@adolfzerkun3407]

Melting furnace, core making, sanding, shot blasting. The whole process. Four de fusion, noyautage, sablerie, grenaillage. Tout le process.

[@pascoalfranciscosposito6638]

Hello friends. Congratulations on the work and cleaning. The organization gives order. Hugs to everyone who makes the factory run.

[@Holy_Maker]

😉👍

[@dorac.v.3881]

Un giro altamente contaminante por el tipo de proceso

[@龔一峯]

it seems that they add inoculum when pouring.

[@Billion._.Master]

오픈한지 오래안된 공장인가보네요 주조공장이 저렇게 깨끗한건 어려운건데

[@Holy_Maker]

기존 공장에서 새로운 곳으로 옮긴지 1달도 안된 상태였습니다. 아주 깨끗했죠😉👍

[@djisydneyaustralia]

So clean. Amazing. Well lit also. I met Freddy Krueger at a steel plant here in Australia, its that kind of vibe.

[@Holy_Maker]

Thank you for watching. have a good day : )

[@코카-x8y]

스크랩 이란 단어가 금속업계에서 더많이 사용되는데, 슬러지로 표기된게 살짝 아쉽지만 영상 잘봤습니다

[@Holy_Maker]

제가 금속 업계를 잘 모르다 보니 자막에서 실수가 있었네요. 코카님 덕분에 수정 했습니다. 감사합니다^^

[@janettavculek9308]

It looked like they just kept making the parts and then melting them, making them and melting them.

[@bellidoify]

Las piezas moldeadas parecen ser las partes de diferenciales

[@pilihan_chanel]

Nyieun naon eta euy

[@chrissartain4430]

SO What is the Part for ??????????????

[@Holy_Maker]

It's one of the engine parts of a car.

[@pulsorohr]

Can anyone out there explain me why not only the part ist media blasted but also the sprues and the scrap metal? Best Regards from Germany, Stefan

[@skuresture]

To have clean material for remelting.

[@bobsnabby2298]

Some of the very simple jobs could be easily automated. Like the mold leftover grinding by people.

[@Holy_Maker]

you're right. Thank you for watching.

[@bendito999]

they probably have a lot of different parts they make, perhaps these little hub things they don't quite make enough of to warrant a further specific system to automatically grind the leftovers, when they already have guys there good at grinding whatever thing they molded that day.

[@nicolasortiz]

Porque critican como si fuera una lastima o pena que haya personal trabajando todavía si es necesario para la actividad económica por que las máquinas no compran ni venden los productos y servicios. Por otro lado excelente trabajo de reciclar y reutilizar el material. Es muy buen trabajo

[@김현진-p4d]

얼굴모양하고있는이부품이름이먼가요?

[@Mt3Dpdrtk]

Ahhh their little faces 😮

[@miquelvigorosrigol6634]

ESTO ES UNA FUNDICION DE LOS MODERNO Y EFICIENTE QUE E VISTO EN ACERO.

[@Holy_Maker]

Gracias por ver.

[@kakoytoyozhik]

8:35 Детали в шоке от такой тряски

[@buyamerican3191]

Thank goodness it was a real factory and not one of those back yard sheds where everyone wears pajamas and all of the parts are dropped on the dirt floor.

[@cyclonicleo]

Lego man face has that "about to get a cavity search at the airport" look.

[@Holy_Maker]

😉👍

[@cengkrengmeyeg475]

한황산업(주)?

[@Greatdome99]

Since the scrap metal comes from a variety of sources, the melted mixture must be chemically tested and adjusted to ensure the new castings have the correct properties.

[@wwlb4970]

They're occasionally tested, but many car parts, specially regular spares, have high tolerances for quality, like oil pumps, brake caliper supports, amortizator casings, pulls, gears, etc. For many of those, when material is metal, it's already fine.

[@antonitobendrito2243]

Inferno🔥

[@djisydneyaustralia]

The tube in front of the coveyor cast pouring, is that a hopper dumping flux?

[@줄기수초]

That is tube for carrying inoculat to pourin stream Inoculant consists of mainly Fe-Si and small amount of rare earth Inocuation is to avoid Cementite matrix and improve graphite form, count

[@rgl1925]

Какая чистая отливка получается. Видимо через абразив проходит, а не просто по вибро-столу

[@КоляИванов-р8ц]

Дак что, раз в землю льют, то должна быть с буграми и впадинами?

[@Evgenkr]

там аж 2 раза дробеструйка, судя по всему.

[@배현호-n3n]

무슨 회사인가요?

[@2wa-h1v]

what is the name of foundry?

[@AungMyintKon]

If can explain step by step about this video is better.

[@patrickperry6945]

This video isn’t a tutorial. It’s entertainment, a diversion. Detail isn’t needed.

[@wannaheinhateshislife]

​@@patrickperry6945 where can i find and learn tutorial?

[@echolee3323]

A metal chips briquette press manufacturer called TITAN, mainly for Hydraulic Briquette Presd Machine

[@richardcerquera8549]

En q país utilizan está tecnología es muy eficiente 😌

[@menwal5702]

En Korea

[@nmr6998]

Good job but what are the parts?

[@Holy_Maker]

Engine parts😉

[@rlewis1946]

Could you be a little more specific, please? Thank you.

[@aj9270]

@@rlewis1946 the one part is a differential carrier for a rear end no idea what the square one is

[@greenbudkelly2820]

@@aj9270 the square part is marked inlet on one spot but I can’t figure it out either

[@rlewis1946]

@@aj9270 Thanks for this info. I tried to identify this Korean foundry, without luck. RL

[@scott-qk8sm]

Time to take all US business out of China

[@Holy_Maker]

This is South Korea😅

[@merouanemegdad8041]

رائع سندعمك في قناتك دائما ؟

[@123-e5z8n]

레고맨 귀여워

[@sky173]

0:18 - look at all the faces on the parts. 😧

[@THR33STEP]

00:19 Looks like Cybermen!

[@york2600]

The march of the lego heads at 8:48

[@michaelbayer5887]

... me wondering - where are now all the Oldtimers - in hot Metall again - Thin Lizzi - Ford Modell T.

[@joaojuvenaldasilva920]

boa tarde aqui no brasil meu trabalho tb e assim metalugica aqui no brasil nome de fuminas em itapira sp

[@Holy_Maker]

Obrigado por assistir.

[@СултанИсламович-ж3ь]

А где ваш офис

[@Holy_Maker]

in korea

[@kms-gu7bl]

Case Differential

[@ahmetylmaz9099]

what is the name of this company?

[@joaojuvenaldasilva920]

cidade de itapira estado de sao paulo brasil

[@jelajahmania]

😮😮😮😮 08:37

[@Holy_Maker]

😁

[@jun5266]

making LEGO's head 0:20

[@reyfandycschannel8609]

👍👷

[@식사했능교]

디프케이스ㅋㅋ

[@scroungasworkshop4663]

That’s not how they do it in Pakistan 😂

[@nastydog1047]

0:19 😮😮😮😮😮😮😮😮

[@Holy_Maker]

🤣

[@brentambrose7036]

No narration!!!!!

[@Korea-1948-o2z]

레고가 나오네?

[@rodjames]

wow they went in the tumbler round and came out square

[@brentambrose7036]

No narration

[@pierrethomas8484]

8:39 😮

[@Holy_Maker]

😆

[@thanhphatleang943]

Hàn Quốc phụ thuộc thị trường nhiều Quốc gia trong đó có VN

[@user-twluc4110]

這就鑄造阿，哪是多了不起、多厲害的製程，全用廢料不加薪料就榮湯會雜質多，那除渣的頻率就要提高，否則成品的良率會下降。

[@СултанИсламович-ж3ь]

Жду очень

[@ernestcotton9324]

America can do the same

[@wannaheinhateshislife]

No one is asking

[@СултанИсламович-ж3ь]

На работу берете

[@КоляИванов-р8ц]

Приходи, литейщики всегда нужны.

[@СултанИсламович-ж3ь]

@@КоляИванов-р8ц а каму абратица

[@muhamadtarom1635]

PT metinca industrial work nyimak

[@dr.a006]

0:18 😦🫨

[@DaniilKovalev-m2t]

Позабыты хлопаты,21 век, вкалывают робаты, а не человек

[@pierrebonneau7785]

le titre n'est pas bon; la fabrication des pièces, n' est pas faites de déchets; mais de pièces a défaut et surtout de parties extérieures a la pièce finale, comme le réseau de coulée, qui est le même alliage que la piece...je n'aime pas notre époque ,ou trop de gens ne savent pas, et disent tout; c'est désolant de bêtise...

[@Holy_Maker]

🥲

[@albertrosales6726]

yo esperando ver indios con chanclas xD

[@mike7gerald]

The workers will become deaf because they're not using hearing protection.

[@Holy_Maker]

T_T

[@kotnapromke]

И без рук. Потому что работают с расплавленным металлом с голыми руками. Они нарушают правила!

[@mohuc-beberovich]

Скукота... Где парни в тапках и без?! Не, в Пакистане веселее и зрелищнее.

[@onenikkione]

Employs very few people so No Jobs. People need jobs.

[@kotnapromke]

Нет. Нужен социализм вместо капитализма. Чтобы высокая производительность труда и автоматизация служили всем людям, а не только собственникам завода. А при капитализме чем выше автоматизация, тем меньше людей имеют работу. И больше прибыль капиталиста.

[@андрейлебедев-й7д]

4.17 отделили летник ,который опять переплавят,вместе с браком и новым металлом.Металлолом похоже не используют,это не россия*.

[@КоляИванов-р8ц]

Да все используют, и стружку тож. Везде.

[@СултанИсламович-ж3ь]

Куму абратица

[@kotnapromke]

2:57 Нарушение формы одежды. Открытые части тела (руки). При брызге металла останется инвалидом!

[@КоляИванов-р8ц]

Да не придумывай, инвалидом. Со мной работал чел плавильщик ом, его два раза обливало чугуном. Ему бы надо было ехать в Голливуд, сниматься в фильмах ужасов. Но нет, работал до самого закрытия нашего участка. И на пенсии будучи 13 лет. Но не какой группы не дали, только каждый год ездил на море, бесплатно. Чтоб в нашей стране дали группу, надо придти на втек хотя бы без головы. А тут ожег. Не мели чего не знаеш.

[@ВладимирЛевин-ь5ю]

😆

[@Holy_Maker]

😉

[@domesticcat5069]

🗨️😹

[@孝一工藤-h8z]

こんなだから製品の品質が低いのだよ｡

[@Holy_Maker]

😭