I have a few bars and just moved into a much smaller garage with low ceilings, so my horizontal and vertical spaces were tight....this looks like it may be a perfect solution.
@MacStrengthCo8 ай бұрын
i stopped using the barbell anchor. Just too annoying to have bars over head in the rack.
@pob1845 Жыл бұрын
Since you showed the washers trick...I unbolted my rack put the washer the right way even if the damage was done...my ocd has been doing much better! 🤣
@MacStrengthCo Жыл бұрын
ha ha.. right on. We have the same OCD! cheers bro
@pob1845 Жыл бұрын
@@MacStrengthCo still in line for the IFS bench review? Waiting for your review to press the magic button
@MacStrengthCo Жыл бұрын
@@pob1845 Thats the plan.
@tony_mau Жыл бұрын
I had wondered how the SSB would work. Thanks for showing that!
@MacStrengthCo Жыл бұрын
Glad that helped! cheers
@EJH-jn6moАй бұрын
Basement Brandon shows getting this rep safety bar up there easily. Cheers
@anthonyl95668 ай бұрын
How many inches under the 3x3 crossmember does the bar sit with the anchors? I have 80” uprights and trying to determine if I will hit my head on the bar ?
@MacStrengthCo8 ай бұрын
don't buy them. Since the video I stopped using them to store bars.
@anthonyl95668 ай бұрын
@@MacStrengthCo appreciate it. They just get in the way too much? Trying to find a solution for swapping my bar and Bella bar in tight space. Kids will have a hard time swapping in the Bella bar
@MacStrengthCo8 ай бұрын
they just jam up the rack too much. I found it annoying to have bars up there. @@anthonyl9566
@anthonyl95668 ай бұрын
@@MacStrengthCo got it! Thanks!
@scubaz28 Жыл бұрын
Nice!! Now I can buy more barbells! My wife thanks you lmao 😅
@MacStrengthCo Жыл бұрын
😜👍🏻👍🏻
@Lpttrsn301981 Жыл бұрын
Btw, have you made a video on swiss/football bars, and if not, do you recommend any particular vendors/distributors?
@MacStrengthCo Жыл бұрын
kzbin.info/www/bejne/jZO9hop_iceWnpI
@MacStrengthCo Жыл бұрын
Overall best cambered bar is the REP bar hands down. If money is no object go Rogue which I have another review on. ELITE makes a nice bar but it's 38lbs and odd sized sleeves it comes in behind the REP bar in my opinion.
@Lpttrsn301981 Жыл бұрын
What about a non-cambered swiss bar?
@MacStrengthCo Жыл бұрын
@@Lpttrsn301981 just not something I use. I have one and rarely used it
@BoiseTriathlete Жыл бұрын
The Rep SSB was my downfall as well. What a pain to store that bar! I wound up having to get Tornado hooks and drill them directly into studs to hang the SSB flush on the wall. There was no other option with those grab handles.
@MacStrengthCo Жыл бұрын
ya it's awkward just to move around! I know exactly what your saying.
@samrmills Жыл бұрын
Good Stuff. I also like where/how you put up that OTB too
@MacStrengthCo Жыл бұрын
Thanks Sam💪🏼
@robdoe8694 Жыл бұрын
Thanks from T. O.
@MacStrengthCo Жыл бұрын
Thank you too!
@trogdor8634 Жыл бұрын
For the SSB likely would have to have the anchors all the way towards the wall depending your rack setup. Otherwise I'd use the anchors for my "go to" bars that I'm gonna be pulling down to use nearly every lift.
@MacStrengthCo Жыл бұрын
Honestly I stopped using the anchor all together. Just easier to pull a barbell off my storage and use it. I swap bars often so probably not the best option for me. I think for home gyms short on space and have 1-2 bars it's a great idea!
@markhalstead2386 Жыл бұрын
Those are a great idea, but they won't work for my setup. I have the Rep Fitness PR 5000 with 30" front crossmembers with a multigrip pullup bar and Ares. I need the room between the pullup bar and middle cross member to do lat pulldowns. My Kabuki Transformer bar is the only bar that gets exclusive "in the rack use" and you have already shown that SSBs don't work well with the storage hooks.
@MacStrengthCo Жыл бұрын
Agreed it's not for everyone. Just a neat storage solution.
@sonofashepherd6668 Жыл бұрын
Have the exact same setup except I have a PR4000. Any tips for ease of use. Don’t really have a problem with mine, but wouldn’t mind hearing your take to see if I’m missing something I can get use of
@DingusSquatfordJr. Жыл бұрын
Is it possible using the anchor as a pair of J cup 😂
@MacStrengthCo Жыл бұрын
I would say no. I don't think they are made for carrying much weight.