Home Made Boat Loader

[@verbatim1144]

Best system yet... brilliant!

[@markmerryfull5959]

Hi Hayden, Love this boat loader. The extending arms are a great idea. Have you put any further info out about what you used in the build.Thanks.Mark

[@DOIN__STUFF]

Hi Mark. I haven't put any info out. What would you like to know?

[@clintonbuckley3798]

Hey mate. I was looking at doing the same for the my pioneer rack on the 200. Was wondering if you would be able to send me some close up pics so I could get a better understanding on how you’ve done it?

[@WildTouring]

Nice on Haydo. Actually watched this before but didnt realise it was you haha.

[@brendabarrett6270]

Any chance of getting a diagram of how the ropes run on your boat loader was great the way you didn't have to pull the boat back by hand appreciate it you can thanks John

[@rayatswan]

Hi Hayden, What size and model gearbox and motor did you order from Motion Dynamics please

[@craigmartin1589]

Hi Hayden. Do you make and sell. Best one I have seen. Need something like that for my 200.

[@DOIN__STUFF]

Hi Craig thanks for your comment. No i don't produce these although these comments are making me think i should.

[@craigmartin1589]

Hayden Cunnold well if you want to make another I will buy.

[@DOIN__STUFF]

Craig Martin. No worries Thanks I might look into it.

[@phantomperformanceparts]

Ill buy one too haha

[@mganut37]

Great job with this loader! Very innovative,

[@adventurebegins1]

Video is old. Doesn't answer comments

[@bradcassidy5700]

Hi Hayden can you tell me please what size motor and gearbox you used and ratio or RPM and where did you get it from????

[@bradcassidy5700]

Read through the rest and found it thanks

[@kevinmcnamara8568]

Nice and simple mate just what I'm looking for, what size tubing did you use for the extensions out the back. Im thinking of using my winch instead of the worm drive.

[@toddandrews8662]

Hi mate, do you remember the torque value of the worm drive unit?

[@DOIN__STUFF]

@toddandrews8662 hey mate I ended up with a 320w, 1600rpm motor on a 75:1 worm drive box which outputted 21rpm and 75nm torque.

[@ivelinageorgieva8298]

Absolute beauty. This is an awesome loader.

[@rudyweber1573]

Very nice! Can you put Informations about emotor and roof rack and stuff you have used in the comments?

[@davideast4727]

Having had a rhino boat loader this looks much more likely to hold up. Could you supply the info on the MOTOR and controller as I am in need of a loader for my cruiser (lc200 landcruiser)

[@connieparent4085]

Eide boat loaders have been making this exact concept for many years.

[@yiotarigas5373]

Hi Hayden, love that system. We have the same, being a flat Rhino roof rack. My hubby was just asking about the whole system you put on & where you got it from. He would love that for our 200 series. You love to hear from you if that is ok.

[@kevinmcnamara8568]

Hi Hayden is there any chance I can visit you to check out the boat loader I have a ARB roof rack and I'm wondering if I can adapt your idea to it instead of buying another rack Cheers.

[@DOIN__STUFF]

Hi Kevin. We can organise a time to meet if you would like.

[@damian31746]

That's a great system. Well done. I'm looking into doing something similar myself. I currently have a rhino rear loader which is great but has so many limitations being just 3 cross bars instead of a platform. I'm interested to know more about the drive system and roller you have and how you built it. Do you still have the same email as you mentioned previously? Can I email you for some info please?

[@cruepprich]

Impressive!

[@gregbarnett8283]

G’day Hayden, very clever design mate and simple. Did you go any further with producing these to sell?

[@nickgreenhill7868]

cool job mate look nice easy too use which good in long run thanks

[@cjm368]

Do you have a part number or spec's for the drive motor?

[@refloyd1978]

Awesome, the best one I have seen so far. Do you have any close up pictures of the pulleys?

[@sunnyyoo6219]

OMG! CRAZY~~~

[@newport5504]

Hey Hayden did you ever end up making these to sell

[@DOIN__STUFF]

Na I didn't mate.

[@chriswebster5908]

Great loader Hayden. What motor did you go and what rpm is it?

[@traviscollinson1467]

How does it pull the boat off the vehicle?

[@DOIN__STUFF]

The rollers that are on the same shaft that spools the rope push the boat backwards.

[@이준범-q8k]

very impressive. If possible, I'd like to have.

[@shumi5754]

....EXELENTE....

[@kevinmcnamara8568]

Hi Hayden sorry for the late reply but been hard at it, I can catch up on the 29th and 30th April if it suits you I'm in North Yunderup. Travelling is not a problem Cheers

[@DOIN__STUFF]

Gday Kevin my email address is [e-mail] send me an email with your phone number and I'll give you a buzz to tee something up. Cheers, Hayden

[@markmerryfull5959]

Thanks for the reply Hayden. Is the rack you have based the loader on a Rhino rack? I have seen a Pioneer platform with rhino backbone system on the net similar, but can be longer than yours. The front support bar looks simple enough. Is this Rhino rack or your own adaption. The back cross bar with the rollers and worm drive and extendable arms looks a little more complicated. Is this all made from alloy or steel? Would you mind if I contacted you at the e-mail given below?ThanksMark

[@DOIN__STUFF]

Yea no worries mark send me an email and i will reply

[@elitemotorcycledrivertraining]

@@DOIN__STUFF did you end up producing more of these

[@josephinerocque9621]

❤

[@АнтонОвсиенко-ш3ъ]

Ну и хренотень..

[@jaylee1166]

you should patent that thing and sell it world wide!!

[@elwoodpolarisrzr5957]

slick

[@8003TV]

素晴らしい！

[@oldschooldiy3240]

It's okay, all in all, I think I would rather have a small trailer!

[@DOIN__STUFF]

Thanks for your reply. I use this rig when I'm towing a caravan. The caravan has a fold up boat trailer in the back.

[@vgoncharov888]

Где ее купить ?

[@alexmat8027]

what is the weight of your boat?

[@DOIN__STUFF]

Hey mate, I cant remember the weight of that boat in the video however we have since upgraded to a Seajay angler 3.75 which is about 80kgs plus about 20kgs for flooring.

[@michaelnovak9766]

A grandad in another video loaded his boat from the side of his car on a wooden frame That was far easier & less complicated than this set up. Sometimes old dogs know better. 🙂🙏

[@edvaldojoseramos788]

Show de bola

[@cwnewsnow7875]

Bad ass

[@super1woofer1]

great job

[@123danle]

hey mate is this a normal rhino rack ?

[@DOIN__STUFF]

Dan Le yes it is just the standard rhino rack pioneer platform

[@Panebco]

Great!

[@nwlady1844]

WOW!

[@williamstares49]

Hi Hayden, Very impressed great job i think it is the best loader i have seen so far, I am interested in buying a loader or building one. I would appreciate any help Cheers for now Bill

[@johnharrower3632]

Crap footage you didn’t show how you build it

[@outtarangetouring2677]

Mate looks great, do you have a blue print or can you tell me where you got the parts to complete?

[@DOIN__STUFF]

Cheers mate. sorry no blue prints just made it up as I went. I did however buy the motor and worm drive gearbox from motion dynamics online.