HOME MADE WASTE OIL HEATER BURNER

[@ndankkp4095]

The best video of waste oil burner I have seen...thanks for share.

[@dawlac_dojyo]

ARIGATO😃

[@thaylangvuong]

This is the best video about waste oil buner which i ve seen. Thanks alot from Vietnam.

[@dawlac_dojyo]

ARIGATO😃

[@brianbright7614]

Thank you so much for all the details. I know MANY people greatly appreciate it. Thank you for your time.

[@dawlac_dojyo]

Thank you! I hope it helps 😀

[@TV49]

Thank you for the great video. Have a great day 👍👍👍👏👏👏

[@dawlac_dojyo]

Thank you! I hope it helps 😃 I'm drinking beer 🤩

[@marius.f.8478]

Hi. Can you describe your oil furnace more, what profile, pipe diameter and height. And what fan did you use? You solved the oil-water separator perfectly 🤔🤔💪💪

[@dawlac_dojyo]

The air pipe is a 50mm square pipe, 550mm long, with 3.2mm holes drilled at a 40mm pitch. The blower is a burner fan that was removed from the kerosene water heater😃

[@bygeorge328]

This is by far the best waste oil heater on utube. Almost unbeliveable...great job

[@jeremyrock9305]

Heck yeah nice job very compact and simple!

[@dawlac_dojyo]

Sorry for late reply.Thank you for your rating.I think it is safer to use a simple structure because it handles fire.

[@MrSprintcat]

Wow good job. Could u do a video on the details? Thank you.

[@Mad.Man.Marine]

dawlac dojyo man oh man. You should build and sell these. What a fantastic design. Looks really efficient too. Good job man

[@dawlac_dojyo]

@@MrSprintcat new video is uploaded( ﾉ^ω^)ﾉ

[@agapiosagapiou]

simple and smart!!! thank you shearing

[@dawlac_dojyo]

thank you😃

[@gandl2123]

Any chance of getting plans for the heater? Cool

[@dawlac_dojyo]

The heater I've been using for a long time has become damaged, so I'm making a new room heater, but I've been so busy this year that I haven't been able to work on it at all😅Next year, I'd like to make a new, more efficient hot air room heater😃

[@mohawksteel2215]

simple, neat and well built ....GOOD JOB SIR.

[@dawlac_dojyo]

Thank you, I think simple is the most durable and safest option. I'm planning to create a new work this year, so I look forward to your continued support.😃

[@NicolasOrdahl]

Excellent build. Very clean, well assembled. Thank you.

[@dawlac_dojyo]

ARIGATO😃

[@BMDM]

Great video 👍

[@dawlac_dojyo]

ARIGATO😃

[@ollykruger4575]

The engineering here is so amazing 🤩

[@dawlac_dojyo]

Thank you! It's been a few years since it was released, but I uploaded a new video last week, so please check that out too. kzbin.info/www/bejne/oqPdYntvrrV9rJYsi=B0GsO9UDrk_5mD0J

[@stevebriggs732]

Well done. This is my go to video for my build

[@dawlac_dojyo]

I hope you find it useful, thank you!😃

[@MadSceintist]

Honestly the BEST I've seen. Great job

[@dawlac_dojyo]

😃ARIGATO😃

[@MadSceintist]

@@dawlac_dojyo Dōitashimashite

[@dawlac_dojyo]

Thank you 😃

[@keithrichardsson9008]

Very very nice.

[@dawlac_dojyo]

ARIGATO😃

[@JasonVladimir]

Very well thought out design. Awesome! Thanks for sharing!

[@dawlac_dojyo]

ARIGATO😃

[@psyamok3735]

This is the best blower style waste oil burner design I have ever seen. Good job! The complete combustion. With plenty of air is definitely environmentally friendly!

[@dawlac_dojyo]

Thank you! There is almost no smoke or smell when burning, and unlike other stoves, it is very quiet. It is kind to both the environment and the people who use it.

[@АбдулгамидАлисултанов-в8с]

Hello! And why did you skew the hole. What's the point?  

[@dawlac_dojyo]

The hole was too big as it was, so I crushed it to make it thinner.

[@thommysoderlind8900]

Top notch .......... wery nice build

[@dawlac_dojyo]

ARIGATO😃

[@dangh5036]

Hello, I appreciate the stove you posted, I'm working on something similar and I was interested in how you varied the speed of the fan?/triac / variable frequency? greetings from Romania!

[@dawlac_dojyo]

Thank you for your comment. This is a sliding resistor. The rotation is adjusted by changing the voltage. I'm glad if you can use it as a reference😃

[@dangh5036]

High Power rheostat ,old but good idea , tks!@@dawlac_dojyo

[@dawlac_dojyo]

Since we are dealing with fire, we believe that simplicity and high reliability are important. Please be safe😃

[@superochoo]

Very clean assembly, thank you! why do you have two oil valves? can't understand the tubing layout for the oil drip, do you mind expanding on that? thanks

[@dawlac_dojyo]

Thank you for your comment! One is to prevent misfire and the other is for temperature control.😃

[@JTKK9]

looking real clean! but i want to know why is there a can next to funnel and why it has a valve?

[@dawlac_dojyo]

This is to separate and discharge the water mixed in the fuel from the bottom of the tank. Motor oil brought in by friends may contain coolant, etc. 😅

[@englishrupe01]

This is a fantastic oil burner, with a revolutionary design. I love it and thank you every much indeed for showing this video.

[@dawlac_dojyo]

I'm glad you like it 😃 I tried to make it simple and easy

[@yiy3429]

Cool design!

[@dawlac_dojyo]

Thank you😃

[@fredmiddendorp4764]

clean burn good job

[@dawlac_dojyo]

ARIGATOGOZAIMASU🤩

[@ecchstore2939]

Pretty blue fire, clean burn! Like it!

[@dawlac_dojyo]

ARIGATOGOZSIMASU😃

[@oddballdynamics.9658]

Whoa. Really cool

[@joesmith5306]

By far the best burner I've seen.. hands down. But... now if we could get some words on how it's made?

[@dawlac_dojyo]

thank you. 😃The construction is extremely simple, and I think the key point is the air pipe. Please refer to the past videos and the comments section for sizes, etc., as a reference. Please leave a comment so I can answer any parts you don't understand😃

[@joesmith5306]

Much appreciated. I'm trying to build one right now actually.. all the videos I've watched don't really break down how they are made. It's always "well I found this part in my yard and welded it to that part" also is there a way to make it burn clean? Like clean enough so thst my white dog don't turn black like he's been doing? I'm trying to make one thst has a 18"x 24" barrel on top to hopefully collect the soot.

[@dawlac_dojyo]

Sorry for the late reply, do you mean adding more space above the combustion cauldron?

[@Canvideo]

It goes without saying. Good video.

[@dawlac_dojyo]

Thank you arigato😃

[@shanawazkhan6969]

Bro , thickness of burning chamber

[@dawlac_dojyo]

I think the thickness of the combustion kettle was about 3mm. I'm out now, so I'll measure it when I get home and let you know 😃

[@dawlac_dojyo]

Thank you for waiting, it's about 2.3mm thick 😃

[@shanesmaineshop]

Now that is a great set up, thanks for sharing.

[@dawlac_dojyo]

ARIGATOGOZAIMASU😃

[@minouche49]

Bonjour, construction vraiment propre... Quelle est l'utilité du petit siphon au niveau de l'alimentation en huile. Merci

[@dawlac_dojyo]

Il s'agit d'un joint liquide pour éviter les retours de flamme 😃

[@jeremyrock9305]

Very nice build

[@dawlac_dojyo]

ARIGATO😃

[@kuysedz9247]

What waste oil do you use?

[@dawlac_dojyo]

I use the room heater every day, but I only use this heater when working outdoors 😃

[@bobbybrown213]

nice job that is genius

[@dawlac_dojyo]

ARIGATO😃

[@briancowie2893]

Nice build

[@dawlac_dojyo]

ARIGATO😃

[@bobbymoore6692]

Thank you for showing this.. I've made a copy of what you have.. It works well.. Good video!!!!!!

[@junaidzahid9531]

Hi:how u made it?Can you please send me the procedure by steps.Junaid Zahid is my fb name.

[@mohammadghannam3574]

Hi:how u made it?Can you please send me the procedure by steps.Junaid Zahid is my fb name. Please , thank you

[@Tubecraft1]

seems to be gassifying the oil first. what a great design and so clean thankyou

[@dawlac_dojyo]

That's right, thank you 😃

[@bsv8111976]

Приветствую 🖐️. Отлично получилось.

[@АндрейРоманкевич]

А что хоть получилось?

[@сергейклецкий-г8ф]

Что это? Посмотрел и не понял. Поясните, пожалуйста.

[@simt2916]

Hello can i use a desile instead of waste oil?

[@dawlac_dojyo]

Of course you can use it, but since the tank is open, you may need a tank lid to prevent ignition if the oil is flammable.

[@karmicmessenger]

This is a thing of beauty. I will be making one. Thank you for showing it.

[@dawlac_dojyo]

ARIGATO😃

[@Олег-э3ч7и]

Очень интересная и простая конструкция!автор молодец!

[@dawlac_dojyo]

Спасибо 😃

[@omararosemena1689]

Preguntas para que sirve este apartado

[@dawlac_dojyo]

Es una estufa que no tiene ningún uso particular😅

[@omararosemena1689]

Bueno investigando en internet en Rusia lo utilizan como calentador y calentador de agua

[@dawlac_dojyo]

Es muy ideal para hervir agua, busco piezas para hacer

[@NaughtyGoatFarm]

Interested to know what sort of blower motor that is? Is it from a vehicle?

[@dawlac_dojyo]

This fan was removed from a broken oil water heater, but the fan can use anything relatively, a hair dryer is enough 😃

[@johnnygoins7457]

That is by far the best oil burner I have seen on u tube,thanks for sharkng.this deserves a subscribe 🙂

[@dawlac_dojyo]

Thank you! It's very encouraging. (^^)

[@YouLikeToast]

Excellent!

[@dawlac_dojyo]

Thank you😃

[@SSergey1978]

Отличная печь 👍! Вентилятор от газового котла использовали ?

[@dawlac_dojyo]

Привет, я повторно использую вентилятор от выброшенного масляного водонагревателя.😃

[@anthonyblaise7804]

Work this vegetable oils ?

[@dawlac_dojyo]

Even vegetable oil will burn without problems😃

[@mohamedaminhakimdin4792]

Hello my friend brilliant heater just want to ask you a question please what's the distance from the bottom upto to that square tube and also there are so many holes on that why is that ? Thanking you reply

[@dawlac_dojyo]

The distance from the bottom is about 40mm, and there are many holes to accommodate different oil types and supplies.

[@mohamedaminhakimdin4792]

Thanks

[@sweenie58]

Looks awesome! Since you're using electricity Have you thought of adding an H-HO gas system?

[@dawlac_dojyo]

Thank you! Is it oxyhydrogen gas? I have never thought of it for use in heaters, but it sounds attractive as a fuel!😃

[@the300c9]

hi, can you give me the brand of fan and variator you use, and the diameters of the square tubes to feed the air thank you, great job

[@dawlac_dojyo]

The size of the tube is 50 mm, the variator is made by a manufacturer called matsunaga. images.app.goo.gl/nx5itgX7zv769Efy7 The fan is removed from the kerosene boiler, the manufacturer etc. are unknown, but the air volume is about a hair dryer ..

[@the300c9]

@@dawlac_dojyo merci

[@als6278]

what is the consumption of used oil?

[@dawlac_dojyo]

It depends on the firepower, but I think it's about 1 liter per hour, this stove is very quiet, not something that makes the main body firepower kettle with a roaring sound like other people are making. Because it is a thing, it consumes less fuel.

[@ghcatzen]

Is that oil burning so good on the floor of the barrel ?? that its not going out ? am i right ? to start it up u need a bit petroleum ? thx

[@dawlac_dojyo]

It doesn't burn at the bottom, it just seems to boil and vaporize. Only at the time of ignition, waste oil or kerosene mixed with a small amount of gasoline is added.

[@jamiewhitney5136]

Any chance I could get your plans for this heater???

[@dawlac_dojyo]

How to make it? This is really simple so I'm just looking at it(^^)

[@igorstaszak133]

Do I see well? No smoke? How much take oil for 1h?

[@dawlac_dojyo]

A small amount of smoke is emitted when the fire is extinguished, but not at all when it is burned. Fuel consumption depends on the thermal power, but it is around 1 liter per hour 😃

[@colbolt54]

How does the oil go up the pip into the furnice? Shouldn't it be drip feed up position

[@dawlac_dojyo]

Piping like this to seal the liquid 😃

[@colbolt54]

@@dawlac_dojyo forgetit!

[@mnshp7548]

absolutely amazing, such a nice and neat design, great combustion as a blue flame instead of bright orange

[@dawlac_dojyo]

Thanks( ﾉ^ω^)ﾉ

[@creativefarmer7182]

kzbin.info/www/bejne/mWLUaZmDobOEeKM

[@plap.]

Just scrolling looking at different designs for ideas in a burner/heater or metal forge and had to say this is the nice clean package I wanted to see. I knew it was possible to make one of these not look like some sort of scrap yard monster from a mad max movie.

[@dawlac_dojyo]

Thank you! MADMAX is so messy😅I came up with this design to make it look neater. I would appreciate it if you could help me with something 😃

[@devauxjean-marc6003]

génial a quand les plans

[@dawlac_dojyo]

Dans le nouveau plan de cette année, il est difficile d'obtenir une grosse bouteille de gaz, et je m'inquiète de passer à un type plus petit, car cela peut être bien s'il est petit mais efficace.

[@CaptainSwoop]

Congratulations on an excellent build. I've read every comment searching for the info I want and all I need is the hole size at the base (underside) of your air tube. I enjoyed the comments and replies and salute your gentle nature. Cheers from Australia.

[@dawlac_dojyo]

Thank you! Well, I adjusted it according to the combustion condition by making a hole of about 3 mm on the lower side and closing it again. I think it's best to start with just one hole. Drinking alcohol while hitting the stove is fun in winter! Cheers 🍻

[@ismoiljonolimov5223]

Ùu

[@eaglegp7]

His build is amazing

[@dawlac_dojyo]

Thanks( ﾉ^ω^)ﾉ

[@eaglegp7]

Can you please contact a local metal fabrication company , show them what you want and in quantity order prices. Off them on line or a Kickstart and when you get enough propane orders , then you make em, ship'em and make a profit while we get a great product.. just prepers alone is a few thousands sales. I get one for the push

[@eaglegp7]

Wait, with the fan , with its construction , you could modify it a bit and it to be a smelter. Two items for one.

[@dawlac_dojyo]

Sure, it's good to do business based on ideas, but I'm just a part of my hobby, it's more fun to make, and it's more fun to interact with people from all over the world on KZbin \ (^) ^) /

[@kevind7617]

Is that a handle from a chipping hammer welded on? I did the some on a homemade bbq grill from a compressor tank..

[@dawlac_dojyo]

This handle is welded by cutting the lid lifter of the Dutch oven (^^) v

[@grzes791]

hello again my friend I have two more questions for you what diameter and height is the main pipe ??? Many thanks in advance for your help, best regards

[@dawlac_dojyo]

Attached 40mm from the pot bottom with a 50mm square pipe😃

[@grzes791]

@@dawlac_dojyo great, and what height is this pipe 40mm ???

[@dawlac_dojyo]

Currently, the bottom of the pot is dirty, so I couldn't measure it clearly, but it was about 40 mm.

[@grzes791]

@@dawlac_dojyo my friend i am interested in the size of the main pipe width and height if that's not a problem, give me your e-mail address and I will send you a picture of the size I mean

[@dawlac_dojyo]

Do you mean the total length of the main pipe?

[@justaguydoingguythings2762]

Id love to see schematics on how yo build. This is by far one of the best designs ive seen. A couple of tweeks and this could be uses to heat an entire house and garage

[@dawlac_dojyo]

If you can make a structure that does not leak exhaust, you can install it indoors! As introduced in another video, I made it an outdoor heater with a hot air heater so that only hot air is sent indoors.

[@philipcooper8297]

Sure, if you don't mind cancer.

[@whyohwhy357]

@@philipcooper8297 says the man that eats fresh vegetables from the grocery store that were grown in improperly cured human poop 😂... Calm down puddin.. you are only going to live a predetermined amount of time. Enjoy this quick moment they call life!

[@dawlac_dojyo]

@@philipcooper8297 I don't know if this will cause cancer, I'm still alive 😂

[@dawlac_dojyo]

@@whyohwhy357 Well, it's true that waste oil heaters may be a shit technology 😅 I'm a poor person who can't miss free fuel 🤣🤣

[@zuzica88]

Felicitări si multumim pentru idee.As avea 2 intrebari:dacă o astfel de instalatie se poate monta într-o locuință,fără să afume peretii și dacă ii atasez o serpentina din cupru,poate inlocui o centrală și să încălzească un spațiu de 150 mp?Multumesc și mult succes în continuare!

[@dawlac_dojyo]

La instalarea în interior, poate fi dificil, deoarece este important să sigilați fierbătorul, deoarece arde din cauza ventilației și pentru că interiorul ibricului are presiune pozitivă. În orice caz, aerul cald trebuie scos pentru încălzirea interioară, așa că, dacă locul de instalare este aproape, poate fi mai eficient să folosiți căldura de ardere în interiorul ceainicului, așa cum este în afara ibricului.(^^)

[@anthonymari2717]

This is a great solid build congrats. Do you have a parts list like the blower used etc.

[@dawlac_dojyo]

Thank you! The blower is reused and all handmade so I haven't written down the details, sorry 😅

[@sinegra30]

How are you getting a clean blue flame out of waste oil? You should have some black smoke and reddish flames, that looks a lot like propame flames...

[@dawlac_dojyo]

Any waste oil usually burns blue, but if the water mixed with the waste oil spatters or ash rolls up, it turns reddish, and depending on the type of waste oil, it burns green.

[@Lucas-vk8fz]

I'd say its because no waste oil is being fed into it..its a drip fed system (gravity fed) and if you look at the line feeding it..it goes down and then has to make almost a 90°bend upwards into the bottom of the pipe..which if you know anything about gravity you'll know that without any pressure behind the oil..anything forcing the oil to move and counteract the forces of gravity..well it would fill the fill pipe back to the funnel...that's why I believe it's so clean...its a decent design and I dont know why a guy would fake it working when changing how its fed would be an easy fix but in my opinion that's what's really going on ..I could be wrong but I'm not

[@dawlac_dojyo]

@@Lucas-vk8fz I couldn't translate it well, but is it the curve of the refueling line?

[@mally35]

Brilliant burner. How did you wire up the variable control for the fan ? How you schematics?

[@dawlac_dojyo]

I am using a general-purpose sliding variable resistor 😃

[@genesmith2416]

Were there air holes also drilled in the tubing also and what model fan

[@dawlac_dojyo]

I am using a fan that I removed from a broken kerosene water heater.

[@liuro73]

Excellent work. I did not understand what the can in the oil supply circuit is doing.

[@dawlac_dojyo]

Is it about the can at the bottom? That is to remove the moisture contained in the oil. Since the specific gravity is lighter than water, it can be pulled out by attaching a valve at the bottom. Oil mixed with water is extremely dangerous so we sometimes open the valve and drain water.

[@liuro73]

@@dawlac_dojyo Many thanks!

[@henryrollins9177]

Beautiful and very clean design..! Thanks for uploading the video..! Have you tried waste vegetal oil on it? What do you think about using it as a boiler and heat up some water to later distribute the heat with radiators? I have access to WVO but dont want a burner like this in or close to the house...

[@dawlac_dojyo]

I thought about heating by heat exchange, but I put safety first, so far, I have stayed in a simple structure. When I use vegetable waste oil, I feel a little hard to burn, but it burns as blue as motor oil. The viscosity change by temperature may be a concern, but I can not get much, so I use it mixed with motor oil.

[@henryrollins9177]

@@dawlac_dojyo Thanks! I will use your ideas to make an outdoor boiler.... Cheers from the Patagonia, Argentina..!

[@robinwells8879]

It reminds me of the old Wilson Wallfire boilers that had a cylindrical water jacket and the fuel and therefore the flame played against the inner wall of the boiler by way of dripping onto the centre of a spinning disk that had the fan blades below. The disk flings the fuel outwards and it’s ignited at the point it impinges on the boiler jacket wall.

[@evildrome]

@@robinwells8879 My parents first central heating boiler was of this design. Thanks for informing us of the actual name for these boilers. Laughably inefficient but reflected the cost of heating oil at the time (pre 1973).

[@trailerparkgarage6574]

Could this be used in a Autobody shop and not mess with paint work? How clean can they burn

[@dawlac_dojyo]

It is not recommended where there is volatile gas, etc., combustion is smokeless at ignition, and when extinguishing fire, it depends on the state of the burning residue on the bottom of the pot, but there is not much smoke.

[@lindonilson26]

amazing! what is the diameter and height of this combustion chamber cylinder?

[@dawlac_dojyo]

I am using a propane gas container with a diameter of 320 mm and a height of 600 mm.😊

[@lindonilson26]

@@dawlac_dojyo Thank you mate. Greetings from Brazil.

[@trinidadysquierdo7924]

How did you wire up the blower motor with the rheostat I'm wanting to make me one

[@dawlac_dojyo]

Is it a variable power supply? Just connect it between the power supply and the fan

[@trinidadysquierdo7924]

Like for a light switch rheostat 120 volts 15 amps

[@mihaicristea3600]

Hi. I don't know what type of air blower is that. Can you please help me?

[@dawlac_dojyo]

I think that the fan should have the air volume of a hair dryer.

[@roberttill3787]

I would like to know what the pipe into the Wynns oil can does?

[@lazyfox661]

Water separator

[@roberttill3787]

@@lazyfox661 OK, sounds reasonable, but waste oil needs a certain refinement before putting in the heater fuel tank. A good thing to do to it before using it is filter it to get lumps out (carbon etc) that would block the pipes and let the water settle out before drawing it from the drum to use in the heater. All that tube will do is drain off settled water from whats been left in the tank between burns.

[@dawlac_dojyo]

The wynn's can receives the water that collects at the bottom of the oil tank. Waste oil sometimes contains water and sludge, so drain it from the drain valve at the lowest point of the oil line from time to time. If the fuel oil contains water, the heat will increase rapidly and it is extremely dangerous, so it is recommended to install a drain.

[@roberttill3787]

@@dawlac_dojyo If the oil is left to settle for a week or so before tipping it into the Burner tank, there will be almost zero water in the oil, and so no need for a drain pipe.

[@dawlac_dojyo]

I see, that's good too! I also gently put it in from the waste oil container and try not to put in water as much as possible, but sometimes it gets in

[@firemanjim9025]

I think these heater are the best, we tested them for 24 hours, and in that time we had no smoke at all, not even when turned off. Over feeding the fire with oil didn't change it, unlike a gravity fed heaters that turn into a nuclear reactor. No soot, and no ash build up in the bottom of the cylinder except the cardboard that it was lit with, now that the ash isn't there it can be burnt 24/7 for days or months. We notice diesel can smoke in normal waste oil heaters doesn't in these, just changes the colour of the flame more orange. Burns approx. 2.7 litres an hour so best connected to a 44 gallon drum but we could have turned it down, and used less. Noticed the cylinder got hot just by starting it with the meth's. Love it. Drip fed

[@dawlac_dojyo]

Looks like it's working very well! The fact that nothing collects on the bottom of the pot is evidence that the bottom of the pot is kept at a high temperature. It is very stable and will be able to extinguish the fire immediately without continuing to smolder after the fuel is shut off. I think it's a very good stove (^^) d

[@skeets6060]

I would really like to see the build on this !

[@dawlac_dojyo]

ARIGATO😃

[@DemeDemetre]

its so satisfying to see fire with no smoke!

[@dawlac_dojyo]

Thank you very much. Unlike the image of waste oil, it burns cleanly without smoke (^^)

[@stevenanderson3386]

Can I buy the plans for this from you please? By far best design I’ve come across

[@dawlac_dojyo]

Thanks for your comment!This stove is different from the one made by others, it is very quiet, safe, has less fuel consumption, and can be adjusted to the optimum fire power that can also cook with the top cover.Of course it can also be enough to turn the combustion kiln into red.Please try by all means.

[@chen7262]

Guy hello. I build better waste oil burner. I can give you my plan.

[@stevenanderson3386]

Vlad hi yes please because this guy does not want to share

[@dawlac_dojyo]

@@chen7262 There are still unfinished parts, good ideas please upload

[@chen7262]

@@stevenanderson3386 email please.

[@gredvei6126]

Здравствуйте. Отличная конструкция. Пытаюсь повторить ,не получится добиться такого же горения . В чем секрет подачи воздуха. А то у меня или пламя красное или если голубое то горит не стабильно и греет плохо.

[@dawlac_dojyo]

Если пламя становится красным, это может быть связано с недостатком воздуха или низкой скоростью.

[@Lacosta-dh7ye]

​@@dawlac_dojyoа если пламя, соломенное цветом а не голубое эта что означает , моло скорости вентилятора или мощность слабая вентилятора

[@dawlac_dojyo]

@@Lacosta-dh7ye The fan can be weak, but try narrowing the holes to increase the air flow😃

[@brutusjb3814]

I'd imagine this is vegetable oil? Fryer oil?

[@dawlac_dojyo]

This is motor oil, of course frying oil, hydraulic oil, ATF, anything burns well😃

[@grzes791]

hello, can i have more details ?? how many holes did you make in the bottom of the pipe and what diameter ?? what diameter are the rest of the holes and at what intervals in the order from bottom to top ??? Awesome project !!!!

[@dawlac_dojyo]

There are two holes on the bottom, the sides are 40 mm apart from the bottom, and the diameter is 3.2 mm. This size and diameter may change depending on the type of oil, the size of the combustion kettle, the type of fan, etc., so for reference 😃

[@grzes791]

@@dawlac_dojyo ok, what about the rest of the holes ??? do they also have 3,2mm ?? what is the distance between them

[@dawlac_dojyo]

All holes are 3.2mm, 40mm apart

[@dawlac_dojyo]

I don't know if 3.2mm is the best, but it's a hole diameter that I made without any reason, please tell me if there is a better size 😅

[@grzes791]

@@dawlac_dojyo ok, i think i know everything, i will try to do something on the weekend. Thank you very much once again and best regards

[@titusm]

Blue flame means it has a very good burning temperature. Do you have any idea why is the flame blue? compared to other variants on youtube where the flame is yellow. Is it the air intake?

[@dawlac_dojyo]

That is the most important point, I think that the speed at which air is mixed with the flammable gas from the oil boiled at the bottom of the combustion pot is important.

[@titusm]

@@dawlac_dojyo do you have any "math" behind it? what should be the distance between air intakes from bottom - and what size holes?

[@dawlac_dojyo]

@@titusm Air holes with a diameter of 3.5 mm are opened at intervals of 40 mm. But there may be better hole diameters.

[@rickpitts1095]

Very nice job you have done. I have one question from a plumbers prospective......why is the supply tee for the fuel pointing down? The tee is allowing the fuel to be trapped in the supply line. Other than that...great job.

[@dawlac_dojyo]

The downward direction of tee is for liquid sealing with supplied oil. If this is not liquid-sealed, it is dangerous for the combustion gas to flow back from here and ignite.

[@michaeld1770]

@@dawlac_dojyo i had the same question but your answer makes sense. nice job.

[@dondiego124]

Awesome!

[@dawlac_dojyo]

ARIGATO😃

[@IonutJaR]

What is the electrical power of the blower?

[@dawlac_dojyo]

I'm sorry, it was a used blower, so the label was dirty and couldn't be read. This is the one removed from the kerosene water heater, but even smaller ones do not affect combustion.

[@IonutJaR]

@@dawlac_dojyo thanks for reply. I've managed to make it work with a 58 W blower 220v . Thank you again for sharing your design.

[@dawlac_dojyo]

@@IonutJaR I'm glad it worked! Do your best to complete your ideal stove!

[@lionelroger626]

Un grand BRAVO de France

[@dawlac_dojyo]

ARIGATO😃

[@deanemily889]

Hi what's the purpose of the can

[@dawlac_dojyo]

This is a propane gas cylinder that is no longer needed.

[@firemanjim9025]

Hi Dawlac, the heater i built like yours has turned on me, smokes badly so i'll be removing it. What's the longest you have run yours for, as it looks like a demo heater only not one that operates day in day out. It worked fine for a few weeks now now it smokes I can't use it. I've used 89mm box steel what are you using it looks smaller than that. Anyone else had issues with it.

[@dawlac_dojyo]

Both of the blower pipes of my heater are 50mm. It's best to put a flame on the inside of the burning pot, but I think it's better to use a slightly larger pipe like you. My heater is 10 years old this year. Although various improvements have been made to the control method, the combustion section basically uses the same mechanism.

[@firemanjim9025]

Another issue I found with it is as it's outside, if the lid isn't shut properly the rain gets into it. Which isn't good. Water and oil doesn't mix very well I've found, more than often explodes.

[@dawlac_dojyo]

@@firemanjim9025You're right, it's very dangerous because the burning of even a little water gets stronger.The lid of my stove is a thick steel plate and almost the same size as a firewood so it won't distort with the heat of combustion. In addition, the inside is a positive pressure, so there is no blowout when cooking on the lid.

[@northernmichiganoverland]

What size square tubing did you use for the air tube?

[@dawlac_dojyo]

I use a 50mm square tube

[@fullchrist4405]

@@dawlac_dojyo is the end closed?

[@dawlac_dojyo]

The bottom is closed, but there is a small hole.

[@shurik1336]

Gut gemacht! Ich habe in der Garage auch nach diesem Prinzip einen Ofen.Grüße aus Belarus.

[@dawlac_dojyo]

sorry. Could not translate.

[@jamesrussell8278]

It says: " Well done! I also have an oven in the garage according to this principle. from belarus"

[@dawlac_dojyo]

Thank you! Everyone is well made (^^) d

[@arnoldshnol8321]

Желаю здравствовать! Какой расход у вашей печки?

[@dawlac_dojyo]

В зависимости от подачи топлива, один литр горит около часа.

[@p.sp.s848]

@@dawlac_dojyo ого!!!!

[@YmaL_555]

good afternoon , mix the oil with water , you will get an emulsion . The heat will be more intense. Add water to the oil little by little - and mix thoroughly .The effect is good

[@dawlac_dojyo]

Well, I've tried a cloudy oil with water, but the firepower is very strong! Will the explosive expansion of water cause the oil to scatter finely? I gave up because I couldn't make a stable and cloudy fuel of the same quality 😅

[@YmaL_555]

@@dawlac_dojyo I made a copper tube and connected a medical dropper. In the tube, Steam entered the gorenje, the effect is also good and the dropper is easy to control the supply

[@dawlac_dojyo]

The metering pump is good! I used it for the room heater before, but it seems that the waste oil I got was mixed with brake fluid, and the pump part cracked and broke 😩 A tube type pump is good Maybe? I want to control the electromagnetic pump with a timer, hopefully it works 😃

[@44coonhunter]

Very nice. 1 question. Can the furnace run without the blower motor after it has heated up?

[@dawlac_dojyo]

This can not burn without a fan

[@44coonhunter]

@@dawlac_dojyo ok thanks

[@dr.ahmedyahya8996]

dawlac dojyo Can you post a video on how to make such a wonderful machine that you have or to see the parts Atsalsal and I thank you with all my heart to help me to protect me from the cold in winter and thank you.

[@dawlac_dojyo]

There are no plans for a video, but I'm thinking of creating a new stove for home heating.I want to make things that are quieter, consume less fuel, have stable firepower, and are safe.

[@dr.ahmedyahya8996]

@@dawlac_dojyo Thanks for the reply. You are a very creative person

[@dr.ahmedyahya8996]

@@dawlac_dojyo Can you tell me how much oil is consumed per hour if you have worked on it?Please tell me that

[@lionelroger626]

SUPER!!!!

[@dawlac_dojyo]

ARIGATO😃

[@ozweego64]

good job bro👍 i saw no smoke. what about smell? can you use indoor?

[@dawlac_dojyo]

There is almost no smoke and almost no odor during combustion, but some oils may smell. However, it cannot be used indoors.

[@simt2916]

Hi again, i am thinking to use propane ignition system for starting fire, any suggestion, so nice design by the way

[@dawlac_dojyo]

When ignited with propane, does the flame of propane heat the waste oil used as fuel to the temperature at which it burns?

[@riceball4u172]

Very clean design, what's the highest temperature you ever reached?

[@dawlac_dojyo]

I've never measured the temperature, I want a thermometer

[@romemabuang]

❤