The Aqara A100 Zigbee - The World's First Lock with Apple HomeKey! (incl. EN and CN subtitles)

[@homekitnews]

Don't forget, you can also find us on the following social media platforms; Facebook: facebook.com/homekitnews Twitter: twitter.com/infohomekitnews or @infohomekitnews Instagram: instagram.com/homekitnews/ Reddit: www.reddit.com/user/HomeKit-News 🖥 Check out our website for all the latest HomeKit related News, Reviews, Listings, Tutorials and more - homekitnews.com

[@zzayanzzhanayah1265]

When will thus be out please

[@homekitnews]

@@zzayanzzhanayah1265 it depends on your region. It’s already available in a few locations is south east Asia, but they won’t be selling it everywhere unfortunately.

[@jasonfriedlander9312]

More than anything else I’m in awe that you were able to get your hands on this. I spent a couple hours trying to find a company that would ship one to the US. (No luck)

[@homekitnews]

Aqara did send this to me, so that made things a lot easier of course, but you might have luck getting one shipped from Taiwan once they start selling them here.

[@holmes333]

Fair warning to all (comments below also mention this in some of the replies which I only saw after ordering the lock): this lock will always auto-lock in 2-3 seconds after being unlocked. There is no option to keep it unlocked or to only auto-lock after a custom number of minutes pass. Unfortunately, this doesn't work for how I want to use it. Hope they give us these features in a firmware update but won't hold my breath. I understand the U100 has a passage mode feature but I really need something with a handle and latch-bolt.

[@GeorgeMaier]

If only it had thread and an IP rating - would be perfect

[@Hudhud5]

I was about to buy it until I saw this video about ip raiting

[@nicolasdujarrier]

From your review, I really love that the build quality and design seems great. Although I really like it, here are some improvement ideas for future iterations in priority order : 1. An energy harvesting system that would use the mechanical energy generated by actioning the handle to recharge an integrated battery (avoids to need to have to regularly replace batteries), but with still the USB-C connector for back-up 2. Compatibility with the future protocol Matter 3. Weatherproofing 4. UWB integration for automatic auto unlock as it would be able to detect the distance / direction where the person is coming from

[@homekitnews]

All good ideas. As regards the Matter integration, there’s a possibility that could happen via one of their two hubs - the M1S and M2 - as they’re going to be upgraded for Matter support later this year. Whether it’ll work that way I’m not sure however.

[@nicolasdujarrier]

Thank you 👍

[@grigorischaralampopoulos4999]

Great video and very detailed again!! I have some questions: 1. Is it the Europe server or the mainland China server in Aqara app? 2. It is zigbee connected with other Aqara hubs and Bluetooth with the home hub correct?? I have noticed that other Bluetooth devices I have like onvis temp sensor are not all the time synchronized, it is ex every 5-10 minutes!! 3. The fingerprint open can be set for all the family fingerprints or only one fingerprint at a time? 4. In apple home app you can’t make any automation geofence or something else like some away? 5. The zigbee version is the international version?? 6. I live in Europe can I buy it in Amazon or from AliExpress? 7. Can this be installed in Europe’s security door if you know? 8. Estimated time life drop the batteries ? Thanks again!

[@homekitnews]

Hi Grigoris, glad you liked the video. At present, you can add it to the Aqara app using “Other” in the server section, as this lock is not designed for the Chinese market. The good news is that once added to Other, the lock also appeared when I logged into the US server (I use US and China servers), so it should be the same for the EU I suspect. You don’t need a hub for HomeKit, as it uses Bluetooth (via a home hub), and even in the Aqara app, as long as you’re in range of the lock, you can use Bluetooth there too. Connecting to an Aqara hub is optional, but you get more functionality by connecting it or a hub. The lock syncs reasonably fast in the Home app, and in Aqara too. You can add 50 separate fingerprints to the lock. You can use Geofencing to make the A100 unlock, but it will only stay unlocked for maybe 2 seconds, before the lock re-engages. The A100 Zigbee is international, whilst the A100 and A100 Pro are for the Chinese market. You might eventually be able to buy it on AliExpress, but the issue right now is that this lock needs a professional installation, so Aqara need to be able to set up a network of installers before they can start to sell it with confidence in areas outside of Asia. We have a steel security door here, and it was able to be installed without any problems, but it does depend on the materials inside the door too. The batteries should give you 18 months on average.

[@grigorischaralampopoulos4999]

@@homekitnews thank you for your detailed answers!! I asked for the server because I have some Aqara in mainland China like ac p3 and G2H camera and all the other hubs and sensors in the Europe server. So I can’t interact one server with the other and when I am signed in one server I can’t use the automations in the other server and all the way around! :( and last I can’t find it in AliExpress:((

[@homekitnews]

Yes, I have the same kinds of issues, although HomeKit does a good job of making everything work together without regional differences. Hopefully it will be on AliExpress at some point. I did see one for sale, but it was sold almost instantly.

[@grigorischaralampopoulos4999]

@@homekitnews haha ok thanks again! But in HomeKit there are very little automations or any ir remotes

[@homekitnews]

@@grigorischaralampopoulos4999 yes, I think Aqara Home is generally better for automations, as long as all your devices are Aqara - and on the same server.

[@robertcruikshank8864]

I wonder how compatible this is with open source systems such as zigbee2mqtt, Node-Red and Home Assistant to avoid being locked into proprietary and cloud based systems like homekit and aqara.

[@homekitnews]

This is an area I know next to nothing about unfortunately, but I would think chances are high someone would work out how to do it.

[@Rol9ns]

do you need a Aqara hub specifically, or can another hub be introduced? Say custom made rasbery pie with zigbee and home assistant. Thanks!

[@homekitnews]

From my discussions with one Home Assistant user, it seems difficult (impossible for him so far) to get the lock to connect to HA due to it initially requiring Bluetooth for pairing. Maybe there’s a way around this, but I’ve not seen mention of this being successful so far.

[@anastasiav626]

Where did you buy NFC key? I have issues finding specially aquara ones since others would not work.

[@homekitnews]

Hi, I bought mine from a store on China, but if you’re in the US they sell them on Amazon - amzn.to/3TjOlOt - it says U100 on the description, but these work with all Aqara locks that support NFC.

[@holmes333]

Many thanks for the detailed video. Can’t find a detailed video for installation though. I’m testing before completing the installation, I had to switch my handles 180 degrees as my door opens to the left. One thing I couldn’t figure out is that my door handle functions are inverted so my locks engage when I pull down and unlock if I pull up. Any ideas what I did wrong for the installation? Thanks!

[@homekitnews]

Hi, here’s the official installation video for the A100 - kzbin.info/www/bejne/pJXRZmuFl5aUepI - I suspect that this will also shed light on the issue with the lock engaging the wrong way.

[@holmes333]

@@homekitnews many thanks. I’ve watched this more than a few times before I reached out. Unfortunately still not sure how to fix… please let me know if any tips. Thanks!

[@holmes333]

figured it out - it was so simple. the part of the lock that was meant for the inside was on the outside and vice versa. Switched them and now working as intended.

[@homekitnews]

@@holmes333 I guess as you haven’t installed the lock yet, it wasn’t immediately apparent. Glad you got it sorted either way!

[@cruz3608]

When is this supposed to get a release in the U.S., and has an official price been announced?

[@homekitnews]

There’s no official word on a US release right now. As regards price, it seems to vary quite a bit depending on where it’s sold. It’s quite cheap in Malaysia, but a lot more expensive in Singapore.

[@peaceful668]

can you use this lock for house front door? maybe water resistant? what's operating temperature?

[@homekitnews]

It’s not designed for outdoor weather. You could use it for an external front door if there’s sufficient cover from the elements (rain,,snow, direct sunlight etc). The operating temperature is -25~+55°C.

[@timbushnell6135]

Hi, Just confirming, you do not need a Zigbee Hub or Aqara Hub to run this and connect to HomeKit? It can connect directly to HomeKit? I understand some it has less features when used only with HomeKit versus with Aqara as well. Thanks

[@homekitnews]

Hi, you don’t need an Aqara hub for this to work. It has its own HomeKit code, and uses Bluetooth for direct connection to your phone, and any Apple Home hub (Apple TV, HomePod, HomePod Mini) for remote access. However, you still need the Aqara app in order to set up a few things, like codes or NFC cards.

[@Mohamed.Haytham]

@@homekitnews Aqara app can only be used using bluethooth or aqara hub to create codes from away? im confused im having apple tv 4k (wifi connected) so I can only unlock/lock from away using home app right? but if i want to create codes that can only be done through aqara app + aqara hub, am I getting it right?

[@homekitnews]

@@Mohamed.Haytham hi, you can open the door remotely from either the Aqara app or from HomeKit, but you can only create, delete or manage passcodes via the Aqara app, and if you want to do it remotely, you need an Aqara hub to do so. The passcode management option is also only available on the A100 Zigbee, not the A100 Pro.

[@Mohamed.Haytham]

@@homekitnews Thanks for replying, I still have unanswered question, I can lock/unlock the door lock while im in different location? at work for example Aqara app works only if bluetooth is connected.

[@homekitnews]

@@Mohamed.Haytham I answered this question in the first sentence of my last reply. Yes, you can unlock the door remotely, either from HomeKit - if you have an Apple Home Hub (Apple TV, HomePod etc) or via the Aqara app - if you have an Aqara hub.

[@TheBradLloyd]

Thanks for this detailed review! I can’t wait for it to come out in North America! Interesting it’s not rated for outdoor use, glad it should be ok with a covered porch. Looks like a very solid product!

[@homekitnews]

Thanks Brad, hopefully there will be enough interest in this kind of lock in North America, as they’re not too common right now I believe. I know that some people use some of the other Aqara locks outside (but protected from the elements) and they’ve had no issues.

[@mlbrgb2275]

The Schlage door lock has been out a number of months and has HomeKey. When did this one come out, as the Schlage says it is the first?

[@homekitnews]

The A100 series came out at the end of 2021, way before the Schlage was even officially announced. homekitnews.com/2021/12/24/more-details-of-aqaras-homekey-compatible-lock-emerge/ I Don’t think Schlage themselves claim it’s the first lock with HomeKey, only some reviewers have made this erroneous claim. The Schlage is the first lock with HomeKey for North America, but it certainly isn’t the first lock with HomeKey.

[@WeirdFlex]

@@homekitnews i like the way this one looks! how can i purchase here in Texas?

[@homekitnews]

@@WeirdFlex Hi, the A100 Zigbee isn’t available outside of some Asian countries (officially speaking), but there are some stores that will sell and ship to customers. Possibly the easiest way is via Amazon Japan, who sell the A100 Pro model and ship internationally, which looks the same, and has nearly all the same features.

[@TiagoCheregati]

Hi there! Thanks for this very good video. I have a question about the A100: If some burglar drills a hole in the door, big enough to put his hand through it, and opens the lock from the inside knob/night button, is is possible to configure the A100 to trigger the alarm and tell me remotely, once the away mode is activated? If yes, is it only possible with the Aqara hub? Thanks in advance!

[@homekitnews]

Hi, there are security features for the lock, so if someone tries to remove the lock panel from the outside, you will be alerted, and alarms can be set up with an Aqara hub to do this. This won’t cover the situation where the door itself is drilled. However, you can set up an automation to set lock to trigger an alarm if someone tries to unlock the door from the inside, but you would have to set automations up to cover certain hours, and/or with certain alarm modes. You would need a hub to do this, as you would need the hub to create the automations, as well as notify you when you’re away from home.

[@flyguy311]

This lock looks great! However, I need a lock that can work on an outside upvc door in UK. Do Aqara have a suitable model or can you recommend another lock with similar features. Thanks

[@homekitnews]

Unfortunately all Aqara locks of this type are not rated for outdoor use, unless they have some form of coverage (porch etc). The only lock by Aqara that will be outdoor rated is the forthcoming U100, but that’s a deadbolt lock, not a mortice lock, so probably not suitable for your door. I’m not aware of any other lock like the A100 that can work outside and is compatible with HomeKit (assuming that’s a prerequisite). Nuki (Nuki Lock 3.0) and Yale (Yale Linus) make retrofit smart locks that fit to the inside of your existing lock. There are also compatible keypads each company sell.

[@JhoneagTV]

Hi, great review. I got a few questions before the purchase: Can I open the door inside with some voice assistant like google home or apple home pop? The lock door still working if I turn off the bluetooth feature. cause I don't feel necessary.

[@homekitnews]

Hi, yes you can get the A100 to unlock via Siri or Google, although with Siri, if you're doing it via a HomePod/HomePod Mini, you will have to authenticate via your iPhone or iPad (security reasons). For Google, you might have to set up a pin code, but I'm not sure if that's mandatory or not. As for Bluetooth, you can't disable it in the lock, as it's still required for whenever you want to check local logs, or to change any settings in the lock, like add or remove users, or change a passcode for example. Additionally, if you're using HomeKit, along with Apple HomeKey, Bluetooth is still used as a direct connection method for unlocking the door, should all other options fail (that's unlikely, but still). You may want to hold off though, as Aqara has now released the D100 with Apple HomeKey, which has fully automatic unlocking - homekitnews.com/2022/05/09/aqara-release-second-homekey-compatible-smart-lock/

[@cyrusho2472]

Have been using it for a few weeks already. Gotta say I love the Apple Home Key and never worry about bringing keys anymore!

[@homekitnews]

Easily one of my favourite HomeKit devices.

[@anathavisouk3825]

Where were you able to purchase it from?

[@homekitnews]

It’s currently only available in parts of South East Asia, and possibly Russia.

[@alprma]

Hi, great review. One question..what’s the purpose of the night bolt if it still can be unlocked from outside?

[@homekitnews]

I didn’t mention it in the video at the time, but only an admin can fully unlock the door including the night bolt, using the digital methods (fingerprint, NFC, passcode, HomeKey). If the night bolt is not engaged then all users can unlock the door, although you can set exclusion times so that people can’t unlock the door between certain hours. Anyone who has one of the physical keys can also fully unlock the door.

[@nxaeem]

Does the deadbolt engage automatically after unlocking it or do we have to manually engage it? If we unlock the door through homekit, can guests enter the house? If the deadbolt is not engaged while the door is closed, does the home app still show status as locked? Can the Home Key be shared among family members? Does it show up for them automatically if they are added to my Home?

[@homekitnews]

The main mortice deadbolts (the group of three bolts) can only be manually engaged or disengaged via the handles, but the latch bolt (the top bolt) is the one that locks or unlocks automatically. However, it doesn’t actually open, it merely becomes unlocked for the person outside the door, and even then only for a few seconds, before it becomes locked again. You can unlock the door from the home app/ HomeKit, but as before, the latch bolt only stays disengaged for a few seconds, so the guest would have to be outside the door, ready to go in. When the door is closed, the latch bolt automatically engages, so it’s locked. The home app will show the door as Locked, even if the Deadbolts are not engaged. The aqara app will show the lock as ‘unlocked’ although the door is still locked to anyone outside. When you add the lock to HomeKit, everyone else who has access to your HomeKit home will also get a digital HomeKey generated and added to their Apple Wallet, as long as the phone is capable of using HomeKey.

[@jef3366]

Is there a wifi function for this smart lock which i can unlock or lock the door remotely ?

[@homekitnews]

If you use it in HomeKit, it can be remotely operated as long as you have a home hub. This would be an Apple TV, HomePod, or HomePod Mini. If you only use it within the Aqara ecosystem, then you can connect it to an Aqara hub, which then allows it to be remotely accessed. This latter option is only possible with the ‘A100 Zigbee’, not the ‘A100 Pro’.

[@TuliskanRasa]

@@homekitnews what connection use between HomePod mini as home hub and aqara 100? Wifi or Bluetooth? I don’t thing HomePod mini have Bluetooth connection

[@homekitnews]

@@TuliskanRasa it uses Bluetooth. All Apple Home Hubs have a Bluetooth connection, including the HomePod Mini.

[@HarikrishnanTdoc]

Hi..Nice review! I installed this lock yesterday and I found the strike plate provided in my box to be different from the installation video. there is no place for the small bolt (what is it?)beneath the latch bolt to go in. Besides the latch bolt won't go inside the strike plate hole correctly, maybe I need the carpenter again! Now whenever I close the door, I have this door unlock alarm coming on and it will stop within 5 seconds. also the Aqara app says "Door is not completely locked"- is it due to this latch bolt not closing fully or the small latch beneath the latch bolt not functioning? When I push it both Aqara app and Home app says Door is locked! ? Otherwise Apple home app always says Unlocked and I can't lock by tapping the lock icon in home app. What should be the strike plate orientation for this to correctly work?

[@homekitnews]

Hi, the small triangle-shaped latch below the standard latch bolt at the top is a safety and security feature that can tell if the door is either not closed or if someone is trying to pry the door open. If this is not able to sit correctly (it should be pressed in when the door is closed), you are going to experience exactly what is happening to you now via the lock and app. You should contact the seller you purchased the lock from to see about a replacement strike plate, or maybe get a worker to align the plate you have correctly, in order to fix it so everything sits in place. Alternatively, if you still have the paper Installation template, this also has a shape for the strike plate, so maybe you can find one that matches those dimensions or get a blank one and get someone to cut the relevant holes. To me, it sounds like the security latch is slipping into the same recess that is designed only for the latch bolt.

[@HarikrishnanTdoc]

Thank you. I’ll hire the carpenter again and realign the strike plate. Your videos are very good. Thanks again for the help

[@homekitnews]

@@HarikrishnanTdoc no problem. If you have any questions in the future, regarding this lock or any other HomeKit products, you can ask and I’ll try and answer.

[@cafultz92]

Would you recommend for an interior door? Like a lock for my office door? Or is that overkill?

[@homekitnews]

It’s a great lock and even if it might be overkill in some situations, it’s might be cool if you have a home office. You can still use it outdoors as long as there’s decent cover for the exterior door, like a porch.

[@squirrelwise]

Thank you. A great review. One question. Is there a way to be able to open the door from the outside when you don’t want it locked. Say you are having lunch in the garden or washing the car and you are in and out of the house. Will you always have to unlocked it? Major major negative on not using it under the weather elements. That rules out almost everyone except apartments and porches.

[@homekitnews]

Hi, there’s no way to keep the door unlocked I’m afraid. I think the reasoning behind this I also why it’s not weatherproof - as it’s mostly for apartments, where besides not being exposed to the elements, you’re less likely to be going in and out, like you would in a typical standalone house. It’s a shame, I agree.

[@squirrelwise]

@@homekitnews thanks for the quick reply. I just wanted to say your reviews are really impressive. Quick and to the point. The branding and editing is also extremely well done. One of the best reviewers for tech I’ve come across (and I watch A LOT of tech videos). Keep up the great work.

[@homekitnews]

@@squirrelwise thanks for taking the time to giving your opinion on what I do - it makes all the difference knowing someone appreciates the time I put into my videos! 👍

[@salehalsaif2]

I just installed it. Love it so far. But I can’t seem to find the HomeKit QRcode to add it to HomeKit. The battery compartment only has a bar code and the SN number. What should I do?

[@homekitnews]

Hi, the QR code is on the battery cover itself, did you check there?

[@alexwarburton]

Great review man! Couple of questions - can you silence the alarm if you opt to peg the door open, and can you set it so no unlock is required (like a house party mode)? Cheers!

[@homekitnews]

Hi, on both counts it’s a no unfortunately. The alarm will only bleep for a few seconds however, and after that it won’t start up again. As regards what is sometimes referred to as Passage mode, there’s no option at all, which is a shame.

[@alexwarburton]

@@homekitnews No worries, thanks for the quick reply!

[@acherub0529]

Awesome video! I am using Aqara M2 as the hub, in order to use cheaper devices, I bought devices from Taobao and chose China server to use the Aqara App. I have couple Aqara double switches (international version, with neutral) and they can work with the hub perfectly. Could A100 international version be connected to the hub using China server?

[@homekitnews]

Hi, I can’t say for sure if the international model (A100 Zigbee) will work on the China server, but I suspect it’s not possible. Only the A100 Pro will work on the China server. The A100 Pro has everything that the A100 Zigbee has, except for remote access to create and manage passcodes, but I don’t think many people would use such a feature often to be honest.

[@rob3342421]

I wonder when they’ll release a thread compatible version

[@loylee]

I can't find this in HK. In your video I think you are recording in Taiwan, right! Do you know any asian distributors?

[@homekitnews]

Hi, yes I’m in Taiwan. You should be able to get the Pro model in Hong Kong, or at least order it from Aqara via Taobao/TMall, and have it shipped to Hong Kong (I think). If you want the Zigbee model, you’d have to look for distributors in Singapore.

[@TheJoaolyraaraujo]

Best HomeKit reviews!

[@cathrynpuffy6165]

Hi, nice review. Regarding to the auto lock function, you mentioned that only the latch bolt can auto lock after a few seconds, not the mortise lock. Do you have any idea why does it works that way? Isn't it not safe enough if I forget to lock the mortise lock and went outside? I am not using Apple phone. So I can only check Aqara app on the door lock status. If the mortise lock is not locked, you said I will see the door status as 'unlocked'. This will make me worry, isn't it?

[@homekitnews]

Hi, glad you like the review. The mortice and latch bolts aren’t motorised, so the way the lock works is by connecting or disconnecting the handles from access to these locks. The latch bolt is always in the ‘out’ position, so it’s easy for this to ensure the door is locked once closed. As there’s no motor, it requires you to use the handle to engage the mortice bolt. As for the Aqara app and the way it reports the state of the lock, as long as it shows the door is closed, you know the door is ‘locked’. Unfortunately Aqara’s terminology is the problem here, so ‘closed’ should probably be ‘locked’ and ‘locked’ should probably be ‘double locked’ maybe.

[@cathrynpuffy6165]

@@homekitnews Thanks for the detail reply :) I'm quite new to digital lock. I thought that they are motorised. Is it common that most of them are not motorised like Aqara A100? Sorry. I still a bit confuse on the "locked" state in Aqara app. If the mortise bolt is not locked, door status in the app will show as 'unlocked', right?

[@homekitnews]

@@cathrynpuffy6165 it all depends on the smart lock. Deadbolt smart locks for use in the US are motorised, because they need to turn the deadbolt in order for the door to be opened. The A100 has a latch bolt and mortice bolt. On this particular lock, the Motorised bit is a small part that either connects or disconnects the handles from the two bolts. So when the latch bolt and handle are connected, turning the handle allows the latch and mortice bolts to turn. As regards the locked status and how it’s reported, whenever the door is closed, the door is always locked, because the latch bolt can’t be ‘unlatched’ from the outside, unless you use one of the unlock methods. Aqara only reports the lock as ‘locked’ when the mortice bolt is turned to the locked position, even though the door is in fact locked. So as I said before, Aqara’s way of describing the state of the lock isn’t quite correct. The app should say ‘locked’ when the door is closed (as it’s automatically locked when the door is closed), and it should say something like ‘double locked’ when the mortice bolt is engaged. In HomeKit the lock will always say ‘locked’ when the door is closed, at least with this lock.

[@fr0d0scious]

It's there no waterproof version of this yet? Can this be made to be waterproof?

[@homekitnews]

Unfortunately these locks are usually designed for the Chinese market where apartments are the norm, so this isn’t going to get a waterproof version any time soon. However, as long as there’s some cover for the lock, so in a porch or under a cover, it can function outdoors.

[@chelseap6182]

thanks for the detailed review. where did you buy the nfc cards? i’m in australia and i’m having a hard time finding where to buy them.

[@homekitnews]

Hi, I ordered mine from Taobao, but they only ship within China. You can easily find them on AliExpress though. I just did a quick check and there are quite a few sellers that have them. Hopefully they ship to Australia.

[@chelseap6182]

@@homekitnews thank you !

[@LacayoDe]

I’m based in The Netherlands where can I buy this aqara lock? I’ve been looking all over the internet for it

[@homekitnews]

Hi, it’s only sold Russia, in some parts of Asia at present, but Aqara are working on releasing it in Europe eventually.

[@meccu19]

@@homekitnews can you show any link for this ?)

[@saugustineosabi]

I need the finger print. It is much faster, sometimes the time to encode is even longer than using the physical keys. Locks like Eufy have finger print option and well built but not compatible with Homekit. Can this be shipped directly Singapore to the US.

[@homekitnews]

Fingerprint is easily the fastest way, although not everyone would be comfortable with providing this kind of biometric data, which is understandable. It’s also probably not as necessary for infrequent visitors to the home. As for shipping from Singapore to the US, you would have to check with the seller as to whether they can do this.

[@nicolasdujarrier]

Any chance that you could review and compare this Aqara lock versus the Schlage one to get a better idea of the features / functionalities differences ?

[@homekitnews]

Hi, unfortunately I don’t have the Schlage, and it seems hard to get right now. They both work with HomeKit and have the HomeKey functionality, but they’re quite different locks in a few ways, mainly the Aqara is a mortice type lock, whilst the Schlage is a deadbolt type lock. One main difference is that Aqara haven’t added the ‘Shared Access’ feature, which allows you to set up temporary passcodes directly within the Home app. You can still do the same type of thing in the Aqara app however. The Aqara app wins for me on the many ways it can be opened - fingerprint, NFC card, HomeKey, app, passcode. As it uses Zigbee there are some great ways you can also integrate the lock into automations with other Aqara devices, like their alarm system. The Schlage is a lot easier to install though, which is an important consideration.

[@nicolasdujarrier]

Thanks very much for those added information 👍. For the moment, I would say I prefer the Aqara one, but I don’t the immediate need for it, so I could wait a bit to review other options.

[@FernandoRodriguez-uu6fj]

Great review! Do you know if this could work with an armoured door wich has moving locks on top and bottom apart from the regular center one?

[@homekitnews]

Hi, it sounds like what you have is called a ‘multi-point lock’ which has a security bolt at the top and bottom. Does the lock have a metal plate that runs from the top to bottom of the edge of the door? If so, this lock is probably not suitable. The A100 comes with its own mortice lock, so you would replace what you already have installed, but because multi point locks cover almost all of the side of the door, it might be difficult to fit this lock.

[@hussainalajlah1776]

Dear thanks for the useful review.. can i use it as normal handle if it is not locked?

[@homekitnews]

Hi, the handle only works as normal on the inside. The A100 will always lock a few seconds after the door is closed, so you can’t set the A100 to be unlocked all the time.

[@hussainalajlah1776]

@@homekitnews thanks for the reply i appreciate if you have any suggestions that will help me?!

[@homekitnews]

It depends on the type of lock you require, but if your current door lock uses a style similar to the A100, then maybe you should look at the Nuki Lock 3.0. This is quite easy to fit, and doesn’t require any adjustments to your existing lock. I did a video of the product here - kzbin.info/www/bejne/h4Cnm5qKr8eHq9U If you want something similar to the Aqara A100, then maybe the ZemiSmart Zigbee lock is something you could try - kzbin.info/www/bejne/qYqTgINse8iHgpI - this has the feature you’re looking for, which is often referred to as ‘passage mode’.

[@hussainalajlah1776]

@@homekitnews thanks 🙏 i may go for zemismart

[@hietrn]

Great review! But i'm still having a question that if i don't use a hub to pair with the lock, what features that i will not able to access? for example, will assign multiple fingerprints require a hub and will home kit still show me the current status of the lock with out a hub?

[@homekitnews]

Hi, you don't need an Aqara hub for any extra features, unless you want remote access to the lock via the Aqara app. With a hub, you can access the lock remotely, and create, alter, or delete users and codes etc. within the Aqara app. When it comes to assigning a fingerprint or adding an Aqara NFC card to be used, you do need to physically be next to the lock, for obvious reasons, so remote access is not relevant here. This is all part of the Aqara side of things, but if you don't use a hub, the Aqara app is still required to add, remove or edit users, which is achieved by a direct connection between the admin/account holder's phone and the lock, using Bluetooth. In HomeKit, you can still access the lock remotely even without a hub, as long as you have an Apple Home Hub (Apple TV, HomePid, HomePod Mini), which allows you to check the status of the lock, and open and close it. Because user management is all done on the Aqara side of things, you can't do anything in HomeKit regarding users. I should add that without a hub, you can't use the lock for automations created in the Aqara app, although you can create automations within HomeKit. The automations available in the Aqara app are far more advanced than those in HomeKit, although they're limited to working with Aqara products. I hope that answers the question, but if you have further questions, feel free to ask.

[@hietrn]

@@homekitnews thank you for your really detailed reply, it's all clear to me now. Much appreciated your time and effort to reply to me this fast. Keep up the good work. I found your channel while finding a smart door lock and settle on this a100 zigbee. Really informative video and viewer interaction is excellent. Subbed.

[@homekitnews]

@@hietrn glad it was of help. Just to be clear, there are three variants of the A100 lock, two of which are only supported on the Mainland China server; All three use Apple HomeKey and HomeKit. The basic A100 model does not have a Zigbee radio, so it can't be used in Aqara automations, and can't be accessed remotely via the Aqara app. The A100 Pro does have a Zigbee radio, and can connect to a Zigbee hub for use in automations with other Aqara devices, but can't be used for remote access for passcode user management. The A100 Zigbee has the Zigbee radio, and can use remote access for user management. So, depending on your requirements, be careful to ensure you get the right model.

[@hietrn]

@@homekitnews Noted. Thank you so much for your reply, oh and i just have one more question, is there any setting that i can enable the door to automatically engage the deadbolt or i'll do it manually all the time?

[@homekitnews]

@@hietrn only the latch is automated, so if you want to engage the deadbolts, or the security lock at the bottom, these are all manual only.

[@taimurasad2228]

is it possible to setup HomeKey without HomeKit? The reason is that I want to put it in a place inside home which I dont want other family members to access via Home app. Can I add HomeKey just to my iPhone without having to make lock available for everyone in family via Home app?

[@homekitnews]

Hi, as I understand it, whoever has access to your HomeKit home, even if they are not admins, they will be issued with their own Apple HomeKey. The only way that you might be able to get around this, is to create a second HomeKit home (as though it’s in a different place), and add the lock to that home, but ensure only you have access to that home.

[@taimurasad2228]

Thank you for clarification on this

[@nicolasdujarrier]

Thank you !!! Really good and helpful video 👍.

[@scottymeuk]

Any idea how this will work with multi point locks used in the UK?

[@homekitnews]

Hi Scott, I think I answered your question on Reddit, but I’ll post it here too for others to see; This comes with its own lock mechanism, so you would just replace everything except the door itself, including the strike plate. You would possibly have to make some extra holes here and there, depending on the lock currently installed though.

[@scottymeuk]

@@homekitnews You did, thank you :)

[@Filipe_2004]

Amazing i have the previous one for 1 year and is amaziiing

[@nogalib]

Is there an option to create an automation to unlock it when approaching (like the august autolock)?

[@homekitnews]

There’s not an option for that unfortunately, either in HomeKit or the Aqara app. It probably due to the fact that the A100 automatically relocks itself after approximately 3-4 seconds, so it would probably cause more frustration that convenience.

[@iGarni]

What if I want to lock from my kids to get out. Is there a way to lock it from inside or outside when I leave?

[@homekitnews]

No, there is no way to do this, probably for safety reasons.

[@iGarni]

@@homekitnews that means I need to install another normal lock for this matter. Thanks 😊

[@danieltan9424]

is this compatible with non aqara zigbee hubs? And using the smart life / tuya application instead.

[@homekitnews]

Hi, this lock is only compatible with the Aqara app and HomeKit. It doesn’t require a hub, but if you want to use a hub for additional options, it has to be an Aqara hub. It won’t work with Tuya hubs or the Smart Life app.

[@Sarganh]

Very interesting thx. Does it exist in gold metal ?

[@homekitnews]

No, just the one finish. They do make a different lock that has replaceable fascia though - homekitnews.com/2022/05/14/aqara-unveil-xingyao-smart-lock-with-built-in-camera/

[@daddygadget2343]

Great review, im in the UK, is there any way to buy the A100 yet, i cant see on Alixpress?

[@homekitnews]

It’s on their Europe website, so they’re definitely trying to get it to EU/U.K. customers, but for the time being it’s only in some Asian countries along with Russia. There is a store that sells otherwise unavailable Aqara stuff on AliExpress, but you can only order in the evenings. It’s called the aqara-high quality life store.

[@arjunram8623]

Hi, i am from india. I installed this using a professional. Here in india there is no support of aqara authorised installation. For me everything is working fine electrically and software wise. But iam facing an issue in this after installation. When is lock from inside and try to open the latch is not opening using handle lever. Can unlock in app and use the inside lever it is working. But when i open from outside even with or without pin it is opening. I think i have done some mistake during fitment. Kindly correct me with procedure to solve this. Expecting a faster response. 😊

[@arjunram8623]

Even my night latching is not positioned normally to the symbol of locking and unlocking

[@homekitnews]

It’s impossible for me to comment or make a suggestion without fully knowing what you may or may not have set up during or after installation. Have you tried contacting Aqara? They would probably be able to help you better than I, and can talk you through the checks to see where the problem may lie.

[@arjunram8623]

@@homekitnews i have sent a mail to the local seller, modo who is the reseller of this product in india. I have no idea how to contact aqara directly. If any customer care details plz share it will be helpful.

[@homekitnews]

@@arjunram8623 you just need to go to their website, and you can contact them via chat or email - www.aqara.com

[@arjunram8623]

@@homekitnews thanks a lot for ur effort. He have responded. The issue is sorted i have missed a process of screw positioning from left side of mechanism to right side. After changing it now working fine

[@BrianLimBTL]

Great thorough review. Thank you!

[@ajisaputrars]

Thank you! Really helpful

[@gregghayes6710]

Thank you for this great review. I did come out of your video with one bit of confusion. It has Zigby in its title, but you say it communicates via Bluetooth. Can you tell me when it uses Zigby? Also, any rumors on when they might have an American version coming? You are correct, the style is not used here very often. I was wondering if they were going to come out with a deadbolt style that is more common here.

[@homekitnews]

Hi Gregg, thanks! To answer your question, the product name is “A100 Zigbee”, but it does indeed use Zigbee and Bluetooth. Bluetooth is used for HomeKit integration, so you don’t actually need a hub for the basic functions, whilst the Zigbee side of things is optional in the Aqara app. Without a hub you only get the basics, and to make changes or add/remove users and set up passcodes, you need to connect directly to the lock via Bluetooth in the Aqara app. With a hub, you can do these tasks remotely, as well as include the lock in automations, which is where the real power of customising the lock comes into play. As regards North America, I’ve seen Aqara tentatively mention a possible release, but also a bit non-committal. I can’t see a deadbolt version of this lock coming out without it looking majorly different, but I do think they’ll come out with a deadbolt lock for North America this year.

[@gregghayes6710]

@@homekitnews thank you for that informed answer. You do great work on these videos. Keep it up and thanks for doing it.

[@homekitnews]

@@gregghayes6710 hopefully the written review will makes things even clearer. It should be ready sometime today or tomorrow.

[@zeinfiz]

Do you know for the hub, must we use aqara's own or we can use other hub such as tuya?

[@homekitnews]

You don’t need the hub, but if you want the lock to use extra features, you need an Aqara hub.

[@n25992]

Can this lock be used outdoor?

[@homekitnews]

It can’t be exposed to weather elements, so if it is used on an external door, that door needs some form of protection from rain, sunlight, snow etc.

[@n25992]

@@homekitnews thanks :) are you using the abode alarm in China?

[@homekitnews]

@@n25992 yes, I have the Abode Iota Gateway.

[@fr0d0scious]

That's really disappointing. The design of this lock is what I've been waiting for. Time for a new porch! ZigBee compatability is huge and opens the lock to all smart home systems. Non cloud too thankfully.

[@binh25]

I pulled the handle up on mine and it wont lock the dead bolt any idea? I can see it engage the dead bolt but it wont stayed locked when you release the handle?

[@homekitnews]

@@binh25 just to clarify, when you pull the handle up, you’re saying the three mortice bolts go into the locked position, but then unlock when you release the handle?

[@binh25]

@@homekitnews correct

[@homekitnews]

@@binh25 I have to say that doesn’t sound normal at all. I’m not sure how it is able to do that tbh. Is it possible you can send a video clip so I can see for myself? You can either upload it somewhere or email it to me if it’s under 20mb

[@binh25]

@@homekitnews I email you the video

[@homekitnews]

@@binh25 just got it and sent a reply.

[@dom1701d]

What a great review! I’m looking at the D100 Zigbee at the moment. Any chance you’ll be reviewing that model anytime soon?

[@homekitnews]

Hi, glad you liked the video. It’s unlikely I’ll be able to review the D100 as it would require further adjustments to the door, which I’m not really prepared to do, as much as I’d love to test it out.

[@dom1701d]

@@homekitnews No problems. I’m trying to work out whether the A100 or the D100 is a better choice but it’s not an easy decision! Thank you so much for getting back to me so fast :)

[@homekitnews]

I think if you don’t want to have to pull a handle down every time you open the door, the D100 Zigbee is the best choice.

[@svth689]

Hi, do you know if the A100 Zigbee lock support HomeKit Guest access? I have where within the Apple Home App you can issue guest access to this lock via a passcode without needing the Aqara app. Is that right?

[@homekitnews]

Hi, unfortunately it doesn’t support Guest Access, which is something of a shame.

[@svth689]

Thanks for the reply. That’s what I thought. I have seen another of the same lock here on KZbin. Someone from the UK had that option to add guests via the home app. Unless that’s an iOS16 option?

[@homekitnews]

@@svth689 I think I know which video you’re referring to, but if you watch the video you’ll notice that at the point he demonstrates Guest Access, it’s not for this lock, and in fact just a separate demo.

[@manjumj2415]

are you using apple watch series 1 still in 2022

[@homekitnews]

I guess some things in life are more important to you than to me...

[@lbzpt]

The Aliexpress version works in European servers? Thanks!

[@homekitnews]

If it’s listed as the ‘A100 Pro’ it will only work on the China server. Even if it mentions Zigbee, don’t assume it’s the ‘A100 Zigbee’ model for international servers, so be careful.

[@chenbayun9494]

if you have finger print why homeky?

[@homekitnews]

Some people would prefer not to provide their fingerprints for personal or privacy reasons.

[@AlexManMe]

What are the typical types of locks in the UK and will this be compatible?

[@homekitnews]

Usually you find people use either latch (Yale) type locks if they’re older doors, or mortice locks for more recent homes, sometimes also using multipoint locking mechanisms. This should be compatible with most doors, as the A100 includes the internal lock mechanism, that essentially replaces any lock you already have. This does also mean, however, that there would be the need to cut a few holes in the door to fit it, so this is the kind of thing best left to a qualified lock installer who can understand the provided template as well as have the tools to it the kinds of holes needed.

[@araroberts24]

Where can i buy this? I am in UK, but can have a friend forward it to me from China. Also do i need the hub if i want to set a temporary password remotely, for example 3 days. Or can this be done without? Will be using this for airbnb let and need to set a temporary password when away from the lock

[@homekitnews]

If you have a friend in China, you’ll only see the A100 (basic model - no Apple HomeKey, no Zigbee) and A100 Pro (uses HomeKey, but no Zigbee). Your friend should be able to ask around and source the Zigbee model, if they know who to ask (unofficially). So if your friend can only get the Pro model, you won’t be able to set passwords remotely, as this can only be done with the A100 Zigbee and an Aqara hub.

[@araroberts24]

@@homekitnews so am I correct to understand the A100 pro has HomeKey but this is not Zigbee and you cannot set password remotely. So instead I should try to source A100 Zigbee version where you can set password remotely but HomeKey is not available on this version? M friend is useless to be honest. Anywhere online I can source this?

[@homekitnews]

@@araroberts24 yes, all of the above is correct. You might be able to arrange for one to be purchased in Singapore or Malaysia, but the only way I can think of is to find a company that does freight forwarding in these places, where you pay for the product and have it shipped to a warehouse address in that country, which then forwards it onto your address. There are various companies that do this in the US for example, but I don’t know whether they’re as common in places line those I mentioned above. Singapore is probably a better bet, but Malaysia seems to be selling them cheaper. Maybe a store from Singapore can ship to your connection in China.

[@marcelagarza7815]

Hi! I just got this door lock but can't seem to change the default language to English and can't understand Chinese, does someone know how to change the language?

[@homekitnews]

Do you have the ‘A100 Pro’ model or the ‘A100 Zigbee’? Both have/use Zigbee, but only the international model is called ‘A100 Zigbee’. Is the lock setup on your door yet?

[@천둥신-z4b]

Just remind one only thing that do not install the stuff under the sun means that kind of locks are considered inside such as ATP, accommodations.

[@homekitnews]

Yes, this is for indoor use only, as it’s not weatherproof.

[@madalinliviuvlog]

Hi. Do you know what's the difference between this version and A100 Pro Zigbee? I see that Pro version it's also ZigBee, but none of these 2 appears in Aqara app set to Europe server. Thank you!

[@homekitnews]

Hi, the Aqara A100 Pro and the A100 Zigbee (in the video) both use Zigbee, but only the A100 Zigbee can use remote access via a Zigbee hub within the Aqara app for things like remote operation and managing Access codes. The A100 Pro can’t do this. In order to add these devices to the Aqara app, you initially have to set the app to the ‘Other’ server. Once added to this server, it will then also show up on the other servers (except for China). Also note that the A100 Pro only works on the China server, whilst the A100 Zigbee works on international servers.

[@madalinliviuvlog]

@@homekitnews Thanks a lot for clarifying this. 👍

[@aiangutierrez5465]

Is there a way to make the deadbolts automatically close aswell?

[@homekitnews]

No, there aren’t any motorised parts for the deadbolts. The only lock that has this is the Aqara D100, which is totally automatic.

[@garygoodger]

The Aliexpress link you've put in the description links to an A100 Pro, is this the same device you reviewed in your video? As you mentioned the A100 Zigbee. From what I've seen, the pro doesn't work in the EU but the Zigbee does? Can anyone confirm this lock would work in the UK and Spain?

[@homekitnews]

Hi, the product in the video is the A100 Zigbee, whilst the AliExpress link is the A100 Pro, which I do mention in the description. The A100 Pro and Zigbee models will both work directly with HomeKit regardless of region, but to add them to the Aqara app, the A100 Pro will only work when connected to the China server, whilst the A100 Zigbee will work on the ‘Other’ server. This ‘Other’ server is interchangeable with the US server, but not the EU server. So when I added it to the Other Server, after switching back to the US server, the lock was still visible. This apparently isn’t the case for the EU server. It’ll still work in the EU as long as you have the server in the app set to the US or Other. You don’t need a hub for the lock to work, but if you want to use the lock in Aqara automations with other Aqara devices, then a hub is required.

[@garygoodger]

@@homekitnews Thank you for taking the time to reply, that's great! Although I've read on Reddit this isn't waterproof, is that true? If so, that's a big issue, and a huge shame for such an amazing looking lock.

[@homekitnews]

Unfortunately it’s not designed to be weatherproof, so it’s more suited for use with apartments or houses with some form of cover for the door, like a porch or overhang of some kind.

[@iGarni]

1:25 I love to get one. But, I can't find the dimensions for the lock mortise & strike plate. I want to make sure if it will fit my door or I adjust it a little bit. Can you provide me the dimensions?

[@homekitnews]

I can send you the actual template guide as a pdf if you want it. send me an message or email (via the About section) and I’ll get it to you.

[@iGarni]

@@homekitnews that will be super helpful. Thanks 😊

[@gustavoalbuqu]

Great video man! I just bought one of those and it is working fine for me back here in Brazil. The only thing I couldn’t set up is the scheduled temporary password that I want to use for some employees back here. This option just does not show up in my Aqara app. There is only the option to create a one time password, but no date/time selection periods. I’ve watched your video many times and it helped me a lot but it seems that you have a different Aqara app version than me…

[@homekitnews]

Hi, is your lock the A100 Pro or the A100 Zigbee? There is a small difference between the two models. The easiest way you can know (aside from the packaging) is whether it’s on the China server in the Aqara app or not. If it’s on the China server, then it’s the A100 Pro.

[@gustavoalbuqu]

A100 Pro

[@homekitnews]

@@gustavoalbuqu ok, so if you want to add passcodes for your workers, you have to be connected to the lock via Bluetooth, which basically means you have to be standing near or next to the lock. To add a permanent user, you need to select the ‘user management’ option, then click on the ‘+’ icon and then select password.

[@gustavoalbuqu]

Yes, I’ve done that. The thing is I want to add a scheduled passcode to a worker, so that they can’t use it at nights or weekends for example.

[@homekitnews]

@@gustavoalbuqu I understand now. At this time that level of control is unfortunately unavailable. I actually mentioned this to Aqara whilst putting the video together, and also asked if they had any plans to add Apple's Shared Access feature, but the answer was "not at this time". So whilst you can create a periodic passcode, it's limited to dates, plus start and end times, but not specific days of the week, or specific times of the day, which is standard on other locks. The only upside is that at least you will have a log of who has entered and at what time and day.

[@SteveBrownAfterglow]

Can you use nfc on an Android phone or do you have to use the nfc card?

[@homekitnews]

The lock only works with Aqara’s own NFC card unfortunately.

[@SteveBrownAfterglow]

@@homekitnews damn. Thanks for the reply.

[@ahenry7220]

Can this lock be used on a multi point lock?

[@homekitnews]

It essentially replaces your whole lock, including the internal mechanisms, so once you’ve replaced the original lock, it won’t be able to control the remaining locks located at the top and bottom of the door.

[@troigrl]

Can I use this in the US on our door and do you recommend AliExpress

[@homekitnews]

These kinds of locks aren't very common in the US, but as long as you're willing to cut the relevant holes in the door to accommodate the lock, there's no reason why you can't use it - although be aware it's not waterproof, so unless your door is for an apartment or the door has some form of shelter, it's not going to be a good idea to use it. I'd advise getting someone who's experienced in cutting holes in doors to fit something like this too. As regards AliExpress, I've never had any issues with shopping there in the four years I've been using their services, but it's important to note that any stores on AliExpress will only sell the A100 'Pro', not the A100 'Zigbee' as seen in this video. The main differences are that the A100 pro will only work with a hub connected to their China server, although using a hub is not required, especially if you only plan to use it within HomeKit. The other difference is that you can't remotely access the A100 pro via the Aqara app for passcode management. Once again, accessing the lock remotely to let someone in is possible via HomeKit though.

[@troigrl]

@@homekitnews thanks for your reply. I do have home kit and was thinking about using this for my garage to home entrance. It looked like a cool lock

[@homekitnews]

I’ve had it for nearly a year now and I can say it’s one of my favourite smart home products, especially if you use in coordination with some other Aqara devices like hubs, sensors, cameras or light switches. If it’s going to be used for the garage door to your home, then it’ll be fine as long as the door thickness is 40mm deep or more. Anything less than that and it’ll be difficult to install.

[@josemulero95]

Where can I buy this?

[@homekitnews]

Hi, the A100 Zigbee (the international model) is currently limited to Russia and some Asian countries, but it should be getting a wider release later in the year.

[@limajuliet9529]

I think this smart handle bar need a function, that U can unlock it all the time!? I have the n100 and every time when the door is closed (use it at my motorcycle garage) I need to unlock it with fingerprint or other options, I need only to push the handle and open the door.. I miss this function!

[@homekitnews]

The Aqara D100 Zigbee has the feature you mention - homekitnews.com/2022/05/19/aqara-officially-launch-international-d100-zigbee-with-homekey/

[@madalinliviuvlog]

What would you recommend between this model and the N200? Also, do you know what its price will be and when it can be ordered? Thank you!

[@homekitnews]

I think the A100 is probably a better lock due to the Zigbee and HomeKey support. Additionally, the N200 is designed to work with HomeKit and Mi Home, but not the Aqara app. This doesn't matter if you only use HomeKit, but it's also important to note that the N200 and the A100 Pro are only officially available in China. The A100 Zigbee is available outside of China in certain territories, so it depends on where you live as to how easy it is to get hold of, and at what price.

[@madalinliviuvlog]

@@homekitnews Thanks for your quick reply. I posted twice this comment but it does not appear. Can you tell me if the N200 (which works through a Bluetooth hub) can set a temporary password remotely, for example 3 days. Or this can be done only using a zigbee version? I'll be using this for Airbnb and I need to set a temporary password when I'm away from the lock. With A100 you can set a temporary password when you're away from the lock?

[@homekitnews]

Hi, as I understand it, the only locks that will allow for remote passcode management are the Aqara A100 Zigbee and the Aqara D100 Zigbee. The Aqara N200 and the Aqara A100 Pro don’t have the option to manage passcodes remotely.

[@madalinliviuvlog]

@@homekitnews Thanks for you're reply,. you're awesome! I bought the N200 version, it had a good price, if I'm not satisfied with it and A100 Bluetooth will be available at a similar price, I will replace it with this one.

[@MrVonky]

@@homekitnews Do you happen to know if Aqara D100 (not Zigbee version but Chinese version) supports Apple Homekey?

[@heidi9569]

I thought the Schlage Encode Plus was the first smart lock with home key?

[@homekitnews]

No, the Aqara A100 came out months before the Encode. homekitnews.com/2021/12/20/new-aqara-products-announced-including-skylight-smart-lock-and-more/

[@JoanLukowicz]

Good day. Can any NFC chip be used or does it have to be original Aqara?

[@homekitnews]

Hi, as far as I’ve been informed, only Aqara NFC cards will work with Aqara locks.

[@JoanLukowicz]

@@homekitnews Thank you very much for the answer. I just ordered original NFC cards. The carrier just delivered the lock to me and I will install it tomorrow. It seems to be very well made. :) 😀

[@homekitnews]

@@JoanLukowicz did you order the Aqara A100 - and did you get the Pro or the Zigbee model?

[@JoanLukowicz]

@@homekitnews Specifically, I ordered the Aqara Smart Door Lock A100 Pro Unlock With Zigbee. My neighbor has the same lock, from the same store, and it's been working without a problem for almost two months. I also have an Aqara HM1S-G02 gateway, but the EU version. Well, I'm curious how it will work together.

[@homekitnews]

@@JoanLukowicz if you have the Pro model, it will only work with a hub set to the China server, but the hub is not required unless you want to use the lock in conjunction with other Aqara devices for automations.

[@stevedekorte]

Is there any way to have the door auto lock when closed?

[@homekitnews]

Hi, the Latch bolt auto locks by default, so once the door is closed, it can't be opened just by pulling the handle down unless you use one of the unlock methods (fingerprint, NFC, passcode etc).

[@stevedekorte]

@@homekitnews Thanks. Looking forward to these becoming available in the US.

[@clarkbuys2000]

Thanks - helpful video. Any idea how to source this in the uk?

[@homekitnews]

The only way currently is to import it from online stores in Singapore, Hong Kong or Malaysia unfortunately, although you might be able to source one from smarterhome.sk

[@homekitnews]

Hi, the A100 Pro is now available on AliExpress - ￡211.92 20％ Off | Aqara Smart Door Lock A100 Pro Zigbee Bluetooth 5.0 Apple Homekey Unlock Fingerprint Unlock Work with Apple Homekit Aqara Home a.aliexpress.com/_mNlYuKO

[@AminVlogs1]

Will this actually work with a UK door with multiple latches ?

[@bennie_pie]

No. As I understand it this lock will not work with UK upvc multipoint doors. There are a few alternatives that will work with your existing multipoint 'gearbox' but most implementations are poor as they either deactivate the additional latches or require the user to lift the handle manually to activate the multi point latches and lock the door. This lock is also not compatible with UK weather - no IP rating so only suited to use on an interior doors which is a huge oversight. Seems It's a bit useless for the typical UK smart home, which is a shame as Aqara kit is pretty good.

[@danieldrakko]

Does anybody know if this lock work in US..? I don't see this types of locks in United States and want to upgrade mine for this one or one that include HomeKit. Thanks

[@homekitnews]

You would need to find someone to install the lock for you, as it requires a bit more knowledge than a standard Deadbolt lock. Once installed, it’ll work on the US server just fine, so it’s just the installation that’s the hard part, and whether the holes that are already present in the door from your current lock will be covered by the holes required for this lock.

[@Nilsje]

This lock has the potential to blow all the competition away.... Except its not weatherproof?

[@homekitnews]

I agree it’s a shame it’s not weatherproof. Perfect for apartments of course, but not so much with doors exposed to the weather.

[@Nilsje]

@@homekitnews Next project, build a porch so I can buy this smart lock haha!

[@homekitnews]

@@Nilsje I would say it’s worth the effort, but then I’m not the one building a porch!

[@RikugunTaii]

How does this work with multipoint door locks that are often found in the UK? Is it compatible?

[@homekitnews]

Hi, it would replace the lock mechanism that’s already installed in your door, but as a lot of multipoint doors have a metal strip going along the length of the door, it may not be possible to install it. If you were able to make the necessary holes in the door for the mortice deadbolts, the multipoint locks usually found on the top and bottom of the door would be unused, as there’s no mechanism to control them from this lock.

[@Silverwing_99]

I can’t find the a100 zigbee anywhere in the uk, the a100 pro is available from Ali express but this can’t be added to international aqara servers

[@homekitnews]

The only place I know of that sells the A100 Zigbee and ships internationally is Homesmart in Singapore - homesmart.sg/product/aqara-a100-zigbee-smart-lock/

[@Silverwing_99]

@@homekitnews thanks so much, I’ve messaged them to ask if they can ship this to me and will mention you linked

[@StaagG]

@@Silverwing_99Can you share how much the shipping quote you’ve got from them? I already have ordered the pro version as it along with Chinese hub was the price of zigbee model without shipping, but I’m still curious :)

[@samersarofim1819]

May you please compare it to the H100 in an article or so

[@IchigoTensaZangetsu1]

Can the auto lock be disabled?

[@homekitnews]

Hi, no it can’t be turned off unfortunately.

[@inc_thunder8946]

hi, how did you flip the handle to be a left handed handle?

[@homekitnews]

If I recall, there are two retaining screws on the inside of each half of the lock that once loosened, allow you to turn the handles 180°.

[@EDFWR]

Hi, I was able to move handles 180°, but it seems that it still is working as the outside is the inside and viceversa....help!

[@Axelean]

Is there any good lock for outdoor use?

[@homekitnews]

It depends on the type of lock you need - do you have a Deadbolt type lock as found in the US, or a Mortice lock, which is more common in Europe?

[@poabeaving]

@@homekitnews Need one for the EU like the Aqara, just rated for outdoor use

[@homekitnews]

I don’t know of any locks that come close to the Aqara locks (visually or with the range of functions) that are compatible with HomeKit. I think Yale make a lock compatible with mortice doors and for outside use, but it doesn’t have a keypad or anything like that.

[@Axelean]

@@homekitnews Mortice lock

[@CA.....]

This is an very well done review, of what appears to be an excellent smart lock. Kudo's.

[@jaimejuarez2141]

Hi, great video! Quick question, do you have the pro or the zigbee version? The AliExpress link takes me to a pro version but it is my understanding that the pro version doesn’t have “one off passcodes” capability or am I wrong?

[@homekitnews]

In the video it’s the A100 Zigbee, but the link in the description is for the A100 Pro, as stated. The Pro doesn’t have remote access to passcode management, so as I understand it, you can do one-off passcodes, but not remotely, only when you’re connected to the lock on either your local network via the hub, or directly via Bluetooth.

[@jaimejuarez2141]

@@homekitnews thank you!! is there a way to get the zigbee version? just if you know.

[@homekitnews]

There‘s a store in Singapore that ship internationally I think. homesmart.sg

[@jaimejuarez2141]

@@homekitnews thank you for taking the time!!

[@jaimejuarez2141]

@@homekitnews bothering you one last time I promise, have you bought in this store before? Just to feel safe.

[@coleture3]

Do they have a USA lock version of this?

[@homekitnews]

There will be a lock designed for the US market later this year. It will be different in some ways, due to the deadbolt locks in the US being different structurally, but it may well have many of the same features.

[@leewalker9851]

Big fan of aqara for a while now. I would jump on this if it wasn’t for he fact it isn’t IP rated for the elements. Such a shame

[@homekitnews]

Unfortunately pretty much all their locks are in the same situation, although the forthcoming U100 deadbolt lock should be weatherproof, given it’s primarily for the US market. Many A100 users seem to have no problems with the A100 as long as it’s covered by even moderate coverage though, like an open porch, for example. It’s not going to hold up against weather on a fully exposed door however.

[@SirFrancescoGalli]

Hey buddy, I've got the lock installed, but it sometimes loses the Bluetooth connectivity permanently, making the lock on the Home app unresponsive. So far I've solved the issue by resetting the lock. What can I do to sort this out? I should mention I have no Aqara hub.Your response will be very appreciated.

[@homekitnews]

Hi, do you have a Home Hub - Apple TV, HomePod, HomePod Mini?

[@SirFrancescoGalli]

@@homekitnews I have two Apple TV’s and 3 HomePods.

[@homekitnews]

How far are these hubs from the lock? Are there walls that may be reducing the Bluetooth signal strength?

[@SirFrancescoGalli]

@@homekitnews No walls. The closest hub is an Apple TV. Literally 3 steps.

[@homekitnews]

@@SirFrancescoGalli sounds like the lock is faulty.

[@greatspeechco]

Still looking for decent smart lock for front door suitable for outside that works in the UK. Just have fingerprint & mechanical key option. Any suggestions?

[@homekitnews]

What kind of lock do you have? Is it the latch type, a mortice lock, or a deadbolt (like they use in the US)?

[@greatspeechco]

@@homekitnews currently pvc multipoint style though if necessary ready to change that to whatever door then works best with good smart lock

[@homekitnews]

I don’t know if multipoint locks are easy to swap out for other types (probably not), but if the lock itself uses a eurocylinder, then you might be good with something that’s retrofit, that sits on top of the inside half of your door. Nuki and Tedee both make these kinds of locks. I reviewed the Nuki on KZbin, so you can check if your eurocylinder will work with it. Other than that, it would probably be better to get a new door, as at least then you have the choice of going for a deadbolt style lock like the ones used in the US, which are generally easy to get, with lots of choice. If you want further help, you can use our Facebook messenger facility on the website. I can help you further if required.

[@greatspeechco]

@@homekitnews thank you very much. Yes I suspect the total replacement and deadbolt will the option. Do you have best recommendation for smart lock for that?

[@homekitnews]

@@greatspeechco as a lot of deadbolts are sold in the US more than the U.K., you don’t have that much choice (unless you order from Amazon.com and get it shipped over), but Kwikset do decent locks, and generally seem to have a good reputation. Maybe you should hold out and wait for the Schlage Encode Plus though. That will have HomeKit, HomeKey and Thread.

[@SH-jl8zf]

temperature rating is totally inadequate for anyone in a northern climate that sees significant cold weather. good looking product unfortunately not usable for many markets in the U.S. based on temperature rating

[@homekitnews]

I do state that this is not suitable for exposure to the weather, so it’s only really of any use for apartments or covered porches.

[@therobnfw]

Will this work on UK doors?

[@homekitnews]

The A100 replaces the whole lock on existing doors, so as long as you don’t mind cutting larger holes then it’ll work, but be aware it’s not weatherproof, so it would only be suitable for apartments or houses with a porch protecting it from rain etc.

[@mohdamrirazlan7879]

best review! subscribed!

[@homekitnews]

Thanks Mohd!

[@juanwilliamocaranzasagua310]

hello friend to open the aqara A100 pro lock remotely via siri i need an aqara M1S hub

[@homekitnews]

If you use Siri to open the lock remotely, you don’t need an Aqara hub, but you do need an Apple Home Hub - Apple TV, HomePod, HomePod Mini.

[@juanwilliamocaranzasagua310]

@@homekitnews So, an aqara hub is useless for me to remotely open the lock, so I must have an apple hub to open the aqara A100 pro lock remotely through siri, right?

[@homekitnews]

If you have an Aqara hub, you can open the lock remotely through Aqara. If you use HomeKit as well, you can open the door remotely but you need an Apple a home Hub, as I’ve already said. Using Siri (on your phone, for example) relies on a home hub, as the A100 connects to your home hub using Bluetooth.

[@spydey2k]

Ajar means the door isn't fully closed

[@homekitnews]

Yes, I am aware. The reason I believe they mean ‘jammed’ instead of Ajar, is there is already a separate setting for door left open (ajar). All HomeKit doors have a ‘door jammed’ feature, so I think they have the terminology mixed up.

[@OldBoyTantrums]

Where can I buy it in the UK

[@homekitnews]

Unfortunately you can’t. It’s only currently available in certain countries in South East Asia, and Russia. Hopefully they’ll bring it to Europe at some point later in the year, but there are no guarantees.