Homemade Car Service Ramps

Homemade car service ramps - DO NOT TRY IT AT HOME !!!

[@robertlee4172]

At my local McD's is an elevated drive through. I just get in line then drive over the cement dividers. A perfect 8" additional clearance for me to get underneath. Some people honk and complain. But I'm quick about it. Done several services on my truck. Saved me ton of money on repairs and didn't spend a penny on commercially made ramps.

[@aonoymousandy7467]

lol, don't know if you're joking but that is some good stuff

[@applejacks971]

...but did you get fries with it??

[@gonetimeless]

And now we know another cause for road rage lol

[@OldAndGettingOlder]

I like the wooden truss teeter totter ones at 1:38 best. I'd have a vertical flag at the mid point to use as a marker instead of just feeling for the end.

[@paullogieri248]

The concept is interesting. The execution is potentially terrifying. A failure at just one point means someone is picking out a casket.

[@4sl648]

The master of this was Joey Chitwood.

[@jaywatts333]

add car shocks to the frt to take away the hard drop. ancor/concrete into the ground. smoother drop and left going down.

[@specialized29er86]

I see no problem using those methods to raise the vehicles but never get under the vehicles without using 4 x certified chassis stands.

[@wildbillhackett]

Railroad ties cut into two foot sections are some of the strongest stands you can have, and they cost next to nothing and last for decades.

[@windward2818]

Notice that no ramp examples actually try to lift a vehicle that has very low ground clearance. The pivoting ramps are just scary.

[@notnilc20]

You can just get wheel cradles by a company called race ramps.....they are 100% safe....the best money I ever spent on any type of stuff like this.

[@crystalball2469]

You could save your car from a flood with some of these.

[@johnrobi0]

1:43 when your roofing contractor says he also works on cars lolz

[@pastoryoda2789]

John Robi lol

[@joeshmoe781]

Sometimes what I do is drive two wheels up on the curb.

[@giovanideromain8877]

That is an old trick and it is safe too.

[@brentspellmeyer8943]

Joe Shmoe lol I've done this for oil changes. 😂

[@RoobehTunes]

There's a bus stop outside my house with an extra high curb. At night when the busses stop I can get underneath. My first car basically got knackered by the jacks and stands.

[@dethmaul]

I had to do that to get to the oil filter on my 90 dakota.

[@sicks6six]

See if the insurance companies pay out when these go tits-up. Want work under your car. Dig a pit. Safest and you can store stuff in it when not in use.. Stihl saw, pick, shovel. Few hundred bricks. 1/2 #MTR concrete and finish to suit. Lights, sockets, wood planks to cover. You will have loads of new mates wanting to use it. Make sure they lend a hand during excavation. I seen one 3 foot deep with 3 foot high walls alongside. The walls were used as seats and the pit cover doubled up as a table..

[@einercamarena2705]

I think ,Most ,to,be more higher ,so is more comfotable ! 😆

[@pavopo]

Seems impressive until part 2 “Service Ramps fail compilation “

[@linusfzj80]

Or you can hire some kids to jack your car up & set it on cinder blocks. ---Sure, they may take your wheels & tires as payment, but they are always done in under 30 seconds.

[@Mike-dx4uu]

Click on www.carlift-ramp-mr1.com for all the details.

[@danc1197]

The nicer ones leave it on blocks, if they don't like you they will drop it on the brake rotors.

[@imadog131]

linusfzj80 Cinder blocks? They are more dangerous than anything in this video

[@kenjones2819]

ditto kickin, these folks not enginers for sure

[@edw9571]

6 days ago i couldn't even spell carpenter now i are one

[@hhnguyen504]

That last one looks easy to build might have to try that.

[@AL197845w34832479823]

and also very safe haahahahahhahaha

[@ACommenterOnYouTube]

All great but what about changing tires or doing a brake job ..??

[@jimmyross4352]

not needed, just a jack and jack stand(s).

[@Saint696Anger]

Some really cool ideas here

[@theninja001]

I also have a service lift, my truck.. I can climb right under it!

[@jmac2050]

all this just to change your oil, what else can it be used for, if the vehicle is not running and needs repair

[@03056932]

treating rust, exhaust work, access transmission, o2 sensors, accessing low alternators etc etc etc

[@naturalselection7163]

How to fabricate ramps that will be your ticket to hell

[@AKAtheA]

2nd seems to be the best designed and made, 4rd one at least looks solid, 5th might be solid depending on how it's fastened together. The rest is sketchy as hell, little to no cross bracing whatsoever.

[@tripjet999]

"Homemade death traps"

[@Well_I_am_just_saying]

My homemade ramps are safer than all of them. I simply stacked two 2 by 8's on top of each other and cut the ends at an angle to make it easier to drive onto. They only lift the vehicle 3 inches off the ground, but it is enough and I guarantee that they will never collapse. I could add a third level to it if I wanted to be slightly higher.

[@RGPinger]

can u do video pls boss?

[@Well_I_am_just_saying]

@@RGPinger I can send you a picture if you post your email address.

[@yz8302]

I don’t recommend using those homemade tools when working on cars

[@rfbu]

actually, how would people know how much weight those ramps can support?

[@allenmckinney9533]

Rfbu that's when the term "overbuilt" comes in. I plan to make a set of steel ramps and I don't plan on finding a flaw while being under my truck.

[@GK-hf5ze]

@@petemiller519 nice... Well said .. Great and interesting

[@4sl648]

I had an aluminum trailer ramp give way when loading a tractor on a trailer. Not fun. When they say 1000# or whatever, dont believe them. Insert wooden blocking under the middle.

[@papalaz]

The last ones would have been better if they were made with metal.

[@dalcoz]

The only safe one was the click bait, that you didn't even show. Wtf

[@MonthlyCramps]

Proud of their work? I'd be sure to not get under and prevent getting crushed.

[@ВладиславОрлов-п7л]

Вторые самые четкие. Там бортики сделать и будет самый лучший вариант.

[@lmalino695]

The one displayed in the thumbnail not in video. Excessive time spent on the least interesting one. Most did not provide any meaningful work height.

[@georgestyer2153]

Ive got a great idea...dig a hole...concrete the sides good and thick make a stair or ladder at one end...I think it' called a pit.

[@CashApp-HelpMeStayAlive]

NOT A BAD IDEA OLD MAN . I WILL START THE DIGGING TOMMORROW. QUESTION ,,YOU THINK I'LL BE DONE BEFORE BEFORE XMAS OF NEXT YEAR ?

[@d-e-a8209]

@@CashApp-HelpMeStayAlive exactly people tend to give out opinions not knowing stuff like that cost the triple of just going with this home made ramps with a little intelligence and some good welds you have a cheap good ramp stand

[@petergregory5286]

Don’t forget to ventilate the hole, remember that CO2 sinks being heavier than air. And, you can’t breathe it. Regards

[@randomarrow7278]

En mí país está prohibido hacer esto que decís

[@joserobertoisoppo9532]

quem mora em apartamento vai gostar de ver este novo invento,pesca roupa

[@dazmac159]

I like the first one!

[@porkchop10]

That last one looked like some lightweight aluminum...sounded sketchy!

[@AaronUnknownPerformance]

Might aswel drive up a curb! No height at all

[@billmea5593]

Ok. I thought he was actually going to show how he made it

[@johnathanescobar9225]

I don’t think these people understand how much cars weigh.

[@michaeleverett2650]

Might as well just use a couple of bags of cement to drive your car on

[@kennyb2357]

I love it. Well done 👍

[@thommytwotoestimesthree847]

These are engineered and tested so they are safe. Human beings are great inventors. Trust your gut. If it looks safe, it must be ok.

[@03056932]

worst advice ever

[@trevorrichardson505]

All those ramps look very unsafe death traps

[@terencejay8845]

Sometimes, an extra few inches is all you need to get the job done. Just ask most women.

[@ambassadorforchrist9504]

Necessity mother of all Inventions.

[@Vladimirtub]

2:36 я сначала смеялся с столь ограниченной высоты, а потом понял что можно сделать 2-ю ступень и 3-ю.... и будет норм.

[@sarahthibodeau6439]

Not one of these things will work for my 10,000 lbs truck Merica!

[@drewski1441]

Never trust anything made out of wood for a jack stand.

[@PedroGomez-bd9ro]

Ever worked on heavy duty equipment?

[@divierteknia]

Some of them have design mistakes that Will have deadly result

[@lamachevre511]

You mean most of them*

[@blahblahblahblah2837]

2:10 That is a lot of faith in some fucking pine

[@VWbugman]

Two ramps and concert blocks is the something

[@oldoldpilgrim7898]

Those trusses scare me.

[@lilorbielilorbie2496]

i "wood" never use wood to jack up a car or truck of any kind. imo. it is unsafe.

[@adolfoocampo5658]

el nsu de eduardo

[@crpth1]

For ramps it's a perfectly acceptable material. Never a light weight passenger vehicle would "crash" a solid block of wood the tires distribute the weight quite well. PS: On the other hand those ramps without stop bars...That's really unsafe. There's always one day when a bit of distraction and you simply drive over.

[@jonk8600]

except.....it holds up a house much heavier than aa car. Done right stacking solid wood pieces with no gas there is nothing dangerous about wood in itself.

[@williamevans6554]

next time your at the fun fair look under the rides most will be sitting on wood blocks.

[@2373stevieb]

The Keel blocks Aircraft Carriers sit on in dry dock are lined with timber. Shouldn't think a car would be a problem if done correctly. However, watching some of these reminds me of the Darwin awards!

[@bachelor843]

Im sorry but these kind of ramps are absolutely dangerous,risky working underneath the car,...the moment that you drive the car into the ramps it was so damn scary how much more working underneath....thnks anyway....

[@aonoymousandy7467]

Most creative design = 1:41

[@grahamrushin4384]

I want to see all the fail's now please

[@chazwalker7156]

Wonder if one or two of these folks have since died naturally...

[@finno123456]

5:51 so unsafe the bleeding thing bends

[@alexzander2358]

Наставьте лайков под комментом, типа я чего то дельное написал. Пусть репу чешат, чего это там русский прокомментил)

[@JC-um9ng]

Thumbnail pic not in video and for what is in there is a load of crap

[@azumi-osaki]

Title says 「Homemade」 but description says 「not to try at home」 それは何ですか "(¬ . ¬)" 1:37 looks fun to try、like rafters。

[@kseries1981]

all of these look extremely unsafe

[@ruthless12street]

Where is this Tijuana

[@larsdahl6594]

Is 1:38 made with 2X lumber?

[@gurlallaali7388]

Wow nice ideas thanks

[@shelbygjojosnonni416]

just tip the car on its side lol

[@ledaniezle537]

Just don't go UNDER THE FUCKING CAR.

[@PnwOnTour]

Those are just for overpriced jeeps at used car dealerships, put some rocks under there quick sale 💥

[@minskimia]

Upside down roof trusses? Really??? lol

[@nathanjohansen7169]

Plot twist - Your roof is made of upside down car service ramps.

[@BirdogEd]

6:40- red ramp detach and reattached?!? What a waste of time and energy 🙁 Respectfully yours

[@scott01clay74]

I will say it short & sweet...just because you doesn't mean you should!!

[@jerrycollins4826]

4:35 wouldve been great if he just drove off the other side (with no ramps) (with russian accent) BOON!!!!

[@PedroGomez-bd9ro]

Hahaha

[@brandonj3556]

I think the second one was at Ozzy Osbournes house

[@Makaronchuk]

На 2:50 есть такие.

[@lucasgroves137]

Hilarious 😅

[@sfcd4757]

Oh hell no!

[@firstdayonline]

The best!

[@ciroleandro4133]

😮

[@tregubenkoaleksey4148]

Все беспонтовые кроме второго варианта

[@gerlandkent6377]

👍

[@paulpan2011]

more lifts please visit logislift.com

[@AL197845w34832479823]

they all look very safe lol haahhahahaha

[@BinhNguyen-rv3fv]

Yes, hsn

[@michaelwashington2682]

What's the point for all of them? Not one of them actually did any Auto repair. Wasted 6min I'll never get back 👎👎

[@JOHNNYFUTS]

sketchy

[@joserobertoisoppo9532]

veja no youtube,pesca roupa

[@Clodoaldooficial4797]

I LOVE IT

[@zeediaz3821]

Genius

[@johnoregan40]

Waste of time ramps,have paramedics on stand bye.

[@jojogamertv4227]

'

[@hackinblack7102]

heah right; try doing that with wet shoes...see how many times you can before disaster strikes. the ones from 5min on are SOOOO wrong; the metal pierced-plate ramps are for loading lawnmowers onto your trailer! and the wooden ones are real pieces of, er 'engineering' no diagonal bracing, held together with screws, really? i wonder how many cars/drivers have been ruined by these 'lash-ups'? proof you can never under-estimate the ingenuity of fools!

[@MC-hs4mf]

Why not 4 of the Autozone type car ramps, metal?

[@rikcoetrop1763]

Salut a découvrir @

[@Dj-ve2hx]

😂😂😅🤣

[@edvaldoeloi4756]

top 👏 show 👏

[@MrXedos9]

mainly for "banglabastlers" 😝

[@ferrari8261]

Опасно

[@weldmachine]

Mr Handyman???????? Handy Yes ???? but most of the people you will see in casualty will be these Handy men????????? I understand the need to save money but not at the cost of if you are lucky permanent injury???? This video is more Funny than Educational. A video of how stupid people can be??

[@michelepatruno9833]

Come smontare 😙😙😙600 16 valvole

[@michelepatruno9833]

Peter CCR ENG nn mi

[@tonycavez]

oh god