Homemade Dump trailer BUILD /Tipper trailer

Tipper trailer build using an old bed of a truck and two ford transit axles 10/6

[@wheelchairwarrior72]

Me and my buddy played the drinking game while watching this video. Every time he said “yeah” we took a shot of bourbon. Needless to say we were both tipsy as hell about 20 minutes in. YEAH !!! 🍺 🍹 🥤

[@seandoran6809]

Thanks glad I could be a part of your drinking game, hope your heads not to sore today 😂🍻

[@harrydavidaererua8017]

YEAH...... they were.

[@mikeboccasini4166]

If you’d of done whiskey shots you would’ve died from alcohol intoxication in under 10 minutes,lol

[@MrTimdtoolman1]

LMAO!!! You were s**t faced is what you were LOL!!!!

[@tomo4690]

I've been doing it wrong all these years I need to get a punching bag for my shop for when things don't go right. 😎 Nice job on the dumper. I'm getting ready to build one my self out of my old dump truck. Enjoyed the video!

[@seandoran6809]

Thank you, best of luck with your build 👍

[@ewanbaxter9199]

Great idea, frees the van up when you don't need an open pick up. Other people should copy this idea.

[@seandoran6809]

Yes it’s been working great so far, thanks for the comment 👍

[@jimmoravec1326]

I’m doing kinda the same thing, very good job you done on yours works flawlessly 👍

[@seandoran6809]

Thanks hope it goes well 👍

[@rickychatt]

Mighty job lad

[@seandoran6809]

Thanks 👍👍

[@bennyhill3642]

I have almost the same trailer no lift😇 Great job!!!

[@seandoran6809]

Thanks for watching

[@J_Beazy223]

Great video and nice build. I didn't think the digger was going to lift it off the stands to get it outside. Thought possibly pick it up one side at a time and set her down easy. Nope Just gracefully drag it off and over the stands works fine too... yeah thats my style

[@seandoran6809]

Sometimes brute force is the only way lol thanks for commenting 👍

[@cutweldngrind]

That's one heavy duty hydraulic cylinder. I am currently thinking on adding a Hydraulic system on a truck bed trailer for testing. I would really like a dual or triple axle dump trailer. Awesome video.

[@seandoran6809]

Yea it's been working great so far, I was going to buy a new tipping trailer but it works out too expensive so this was perfect. Thanks for watching 👍

[@Brush0akie]

That’s a really good video for DIY dump/tipper trailer build. I’m in the US of A California west coast Monterey & Carmel Valley.

[@seandoran6809]

Thanks appreciate the comment. It's been going great 👍

[@Ants_Pants]

Nice build Sean

[@seandoran6809]

Thanks Andris it turned out well 👍

[@lewispond9876]

Very nice build!

[@seandoran6809]

Thanks for watching 👍

[@nietbestaand4597]

Yeah uh yeah nice trailer

[@seandoran6809]

Thanks

[@0556827100]

Good job. Really appreciated. Saffeer from Oman

[@seandoran6809]

Thanks for watching 👍

[@0556827100]

@@seandoran6809 I have a body building workshop in Oman.

[@seandoran6809]

Good man thanks for commenting 👍

[@jefferybarron929]

Fine looking trailer... Especially after its Painted. I mean no disrespect but Might I suggest running another "C" channel on the outside of the frame to better support your spring hangers. That's a lot of weight when loaded to be putting on just a 2 x 2 angle iron... PS: Loved the video. I do love building and fabricating trailers. My hobby...

[@seandoran6809]

Thanks for the comment and the advice. I will do that, I've a few other wee bits to do to it as well. I'm new to metal work but really enjoying it. Thanks for watching 👍

[@barrybrady6814]

That's a decent trailer carries a fine load fair dues to you and if anything goes wrong its easily repaired

[@seandoran6809]

Thanks mate, it's been going great so far. Thanks for watching 👍

[@davisscott8499]

Great build seems heavy duty what size is the main trailer body and what is the section size of the steel ?

[@seandoran6809]

The trailer is 12ft long and the steel is a quarter inch thick. Thanks for commenting 👍

[@elricofarmer1561]

Yeah...... Good Job!

[@seandoran6809]

Thanks mate 👍

[@daniellynch9451]

Fine trailer keep making videos like this👍

[@seandoran6809]

Thanks mate I appreciate it 👍

[@ruslankadylak2999]

Not a bad trailer. Yeah...

[@seandoran6809]

Thanks👍😂

[@markgallery8291]

Good stuff Sean

[@seandoran6809]

Thanks Mark 👍

[@ng4410]

if you build anther make a rotisserie for each end from scrap. Makes tasks far easier building a trailer . welding especially. use them all the time in Tasmania.

[@seandoran6809]

Thanks for the tip mate will keep that in mind. Thanks for commenting 👍

[@davidriley8590]

Interesting video, good strong tipper thanks for sharing I'm watching from West Yorkshire you have a new subscriber and thumbs up.

[@seandoran6809]

Cheers David for the positive comment and thanks for subscribing and giving me a 👍 will have more new videos coming up in the new year

[@silentdeath9237]

I would've just rebuild the engine on the truck

[@seandoran6809]

Was planning to do that but the frame and body is all rusted underneath. Thanks for watching 👍

[@dirtypocketsct]

Good job, only problem is where your standing when its raised. You should never stand in between a dump trailer and truck.

[@seandoran6809]

Thanks for the tip, I'm going to get a remote for it, I was too eager to get using it! Thanks for watching 👍

[@oleksII1903]

Great job. Interesting video. But i think you make too big weight.

[@redamor9182]

Nice build there Sean good work old son There's only one point if I may and that's is there is quite a gap between the bottom of the side Gates and the the floor allowing a lot of spillage mate I'd really hate for you to spend the rest of your life paying damages for the horrific accident caused by gravel spilling out and hitting a motor cyclest in the face or the missus and kids windscreen A little dramatic some may say??🤔 Happens every day somewhere in the world😕 Mind how ya go olmate

[@seandoran6809]

Yes mate good point cheers for that, one of the hinges was broke but I've it fixed and all. Thanks for watching and commenting 😊

[@PioBoyle]

very good! can i ask where you were using the arc welder as well as the mig!

[@seandoran6809]

Some of the gaps were bigger so that's why I was using the arc welder as well as the mig. Thanks for watching 👍

[@stevenburke1599]

Well lad did you use transit springs too?

[@seandoran6809]

Thanks for the comment mate, no I used heavy duty leaf springs for a trailer. 👍

[@philipmcmaster9723]

Really enjoyed video I looking to do same that's how found u Have liked and subscribed 👍

[@seandoran6809]

Thanks very much Philip. All the best with it, if you've any questions give me a shout. Good luck 👍

[@RobinRK1962]

What are the dimensions of your shop LxWxH? If you were to build again with the same floor square footage would you change any of those dimensions, and why? Love watching the process of the build 👍 ty Robin

[@seandoran6809]

Hi Robin it's 17m long, 7m wide and 3.2m high. I'd keep it the same I'm happy enough with the layout and size. Its a lot more usable now that I have a storage shed to keep all the large equipment in. Thanks for watching and commenting 👍

[@wfegdhdf147]

ថររេរ៣

[@frankobrien7765]

Find job fair play to you 👍

[@seandoran6809]

Thanks Frank appreciate the comment 👍

[@mrgoodtimes05]

How many times did he say YEAH? Sounds a little weird . YEAH

[@seandoran6809]

I'm not saying yeah I'm saying ehh just trying to think what I'm saying, it's just the way we talk over here! Thanks for watching

[@harkbelial]

Yeah count 168423

[@seandoran6809]

Thanks

[@pmdoit]

Yeah 😆

[@seandoran6809]

Thanks

[@Harrison6624]

Fucking rain man!!!!!! lol

[@seandoran6809]

That's Ireland for u lol 😂