I converted my 5x10 utility trailer into a dump trailer / DIY dump trailer

I was in need of a dump trailer for some home projects so I converted my 5x10 trailer into one. I used an electric winch and mast system to do the lifting. #dumptrailer #diy #utilitytrailer #fabrication #welding

[@my60year]

OMG! I fell off my chair when it slammed down. Must people would of cut that out but not you. Love your channel and keep them coming. I am pretty sure you were the one who taught me how to weld over 20 years ago. Thank you!!! Best hobby I have ever had. Welding up a locking AR holder for my F250 this weekend.

[@wallysworkin823]

Haha gotta show the mistakes too.

[@pg9112471]

I had a 4x8 foldable northern supply trailer I used as a bed in a 5x8 utility trailer I was given and turned it into a dump trailer similar to your build. I made the 4x8 removable so the 5x8 stays original with the rear gate/ ramp operational. I did have the same challenge figuring out the mast. I welded my winch to the mast and also made it removable and height adjustable. Definitely a rat trap if something goes wrong. But the wireless remote gives you the ability to stay back and keep your eye out on others when your operating it.

[@FFRJB1971]

Did you start with a 4x8 or 5x8? Trying to figure out what you meant. I'm wanting to make my 4x8 into a dump

[@pg9112471]

@@FFRJB1971 I had a 4x8 since 2010. My brother in law gave me a 5x8 in 2020 which is way better built with a removable gate ramp. I only used the 4x8 frame and chucked the rest. I welded the 4x8 to make it rigid to carry a good load without breaking. Now the 5x8 stays stationary while the 4x8 is what tilts on pivot hinge points where the ramp gate goes. If you want to do something similar you can make a platform out of 2x4's and a sheet of plywood you'll have to add at least a 2 foot high walls on three sides and a removable door on the rear. Add some good strong hinges that attach the rear of the 2x4 to the frame of your trailer and you'll need a mast which you can make out of 2 2x4's sandwich together. This is where you can attatch your winch. The rest is hard to put into words. I'd have to show you. Subscribe to my Channel and I'll make a quick video explaining and showing what I mean. Took me a good while to figure it out but every time I go to the dump I get stares and people ask me if I would sell or make them one. I use a small plastic tool box that I fit a 12v lithium battery and the winch controller. Anyhoo let me know if you're interested I can muster a quick video. On a weekend.

[@FFRJB1971]

@pg9112471 planning on reinforcing with steel.

[@irvingcobian]

What you could do is maybe cut it at a 45 and it could possibly ratchet on the way up but quickly engage in a hole on the way down

[@wallysworkin823]

We talked about that but since the pin is round we were worried it would rotate.

[@FFRJB1971]

Did you shorten the length for strength?

[@wallysworkin823]

I didn’t want the bed any longer than 10’. I shorted the frame to move the hinges forward. Moving the hinges forward takes a considerable amount of load off the winch. Most dump trailers have the hinges 2-3’ from the rear of the trailer.

[@petem6291]

Wally, you do nice work I am sure you will get years of use out of it. Down the road if you chose to sell it? You will get most of your money back you have moved past the cheap trailers when you made a dump body type , I have only seen very heavy duty duel axle dump trailers so you have something there that would appeal to many people in the trades and doit them selfers

[@wallysworkin823]

Thanks! My friend that builds trailers wants to copy it (I was the ginny pig 😂) We also do not see too many small dump trailers around here.