So long story short, it's a fancy desktop fan for aviation enthusiasts.
@interlinkknight8 жыл бұрын
Yes, and nothing wrong about that
@HelloKittyFanMan....8 жыл бұрын
Hehe, yeah, it's... "COOL," ha!
@MM-un3nb8 жыл бұрын
DoctorMac It's very nice, I like it.
@3az3oz7 жыл бұрын
Man, if it had reverse thrust to act as a fan, that would be cool as fuck
@blumac98017 жыл бұрын
Microoperations it would be loud if it was an actual engine lol
@Jboss2001Gaming8 жыл бұрын
title say jet engine but its electric still cool dog
@Democlassof148 жыл бұрын
jet engines make thrust by burning fuel and air, creating thrust, like a rocket. this is just a propeller in a jet-looking case
@johnnyllooddte34158 жыл бұрын
an electric jet is still a jet engine hahahaa
@Democlassof148 жыл бұрын
Daniel M what im saying is there is nothing that makes this a "jet". its just a electric fan
@jimbojones73408 жыл бұрын
A "jet" is a stream of a liquid or gas forced out of a small opening. An engine is a machine with moving parts that converts stored energy in to kinetic energy. While this guys creation is not a "jet engine" in the commonly used sense, it is technically a jet engine, by definition of the words.
@Democlassof148 жыл бұрын
Jimbo Jones yeah there is no gas or liquid being used
@elliotchen77068 жыл бұрын
I don't really like the electronic noise but that is awesome!!!!! put some stuff in the engine. use it as a mosquito killer so that when they fly near the engine will suck them up and destroy them.
@HelloKittyFanMan....8 жыл бұрын
Well, there's not really an electronic noise in this one. Maybe you're hearing the brushes, commutator, and maybe bearings, of the motor. That's mechanical noise.
@elliotchen77068 жыл бұрын
Maxx Fordham oh. Makes sense.
@HelloKittyFanMan....8 жыл бұрын
Yep, Elliot Chen, thanks.
@adrianandpjoutdoors5658 жыл бұрын
Elliot Chen cool
@fouzaialaa79628 жыл бұрын
why ......the little mosquito's are trying to get a living and suck your blood but no .....you only think about yourself !!!
@an1477 жыл бұрын
Perfect for an RC Boeing 777.
@justanotherasian43956 жыл бұрын
an147 unless you can make this produce a metric shit ton of thrust, a scale 777 isnt getting of the ground with that.
@justanotherasian43956 жыл бұрын
@@a.k.1965 a scale 777 would probably weigh about 30-50 pounds. You would need pretty powerful motors that can output more than 30-50 lbs of thrust.
@roshankathayat70055 жыл бұрын
But it doesn't provide enough thrust
@fusion43735 жыл бұрын
Nah it’s probably for an A320-200
@cod_cape54835 жыл бұрын
I agree with the a320, the b777 is just way to heavy for the motor. Ur gonna need a crap ton more thrust
@MrMarcBeat8 жыл бұрын
this engine is called "the hotglue turbine"
@Bagusp978 жыл бұрын
MarcYz loltfl 😄
@itecko21937 жыл бұрын
xD
@ludwig40297 жыл бұрын
MarcYz 😂
@alonsobla7 жыл бұрын
MarcYz i
@Barontoaster7 жыл бұрын
MarcYz 👊😂👍
@supercat3808 жыл бұрын
Brilliant replica with convincing audio and characteristics of the real thing... well done!!!!
@interlinkknight8 жыл бұрын
Thanks
@primatoolsengineeringworks77638 жыл бұрын
+interlinkknight ..can I purchase it???
@interlinkknight8 жыл бұрын
+92 Tayyab3 thanks for your interest but is not for sale. I would only sell it if would be for considerable amount of money, and i doubt someone would pay a lot for it. My kids like to play with the engine.
@THEADVANCEDGAMERTAG8 жыл бұрын
is 2000 USD exceptable...
@interlinkknight8 жыл бұрын
Ha ha. Sure, but I can't imagine anyone paying that much for this model.
@Talltrees848 жыл бұрын
Impressive. The next step is scaling it up for a 767, 777 sized aircraft.
@barrygeary1890 Жыл бұрын
Sounds so real like a real ryanair love the sound ❤
@fouzaialaa79628 жыл бұрын
most satisfying engin start and acceleration on the internet ........you can break the little plastic peace that touche the metal wheels gear to get lower resistance and more speed
@interlinkknight8 жыл бұрын
But if i cut the plastic peace it wouldn't sound as cool
@isaacalt35178 жыл бұрын
interlinkknight a
@yaaahhtcha8 жыл бұрын
Nice fan !
@merigonmeri7 жыл бұрын
dude stop saying its a fan . its actually an engine damn you guys
@yaaahhtcha7 жыл бұрын
Sorry dude, Nice ventilator !
@mayhemmike17896 жыл бұрын
😂😂😂
@southwest00925 жыл бұрын
@@merigonmeri. Shut up
@bulatnoname96667 жыл бұрын
Nice fidgetspinner man
@SamiJumppanen8 жыл бұрын
Oh, you made the blades!! Cool handicraft! Impressed.
@jsinghkhaira8 жыл бұрын
This is awesome! I think it's amazing you made something this detailed from salvaged parts! This is seriously awesome and an inspiration!
@interlinkknight8 жыл бұрын
Thanks
@titaniumcassowary7 жыл бұрын
This is the single most awesome thing I have ever seen, period.
@RaldinCasidar5 жыл бұрын
0:50 im thinking that this engine would take off itself😂
@noah_aviation88455 жыл бұрын
LOL
@arprecisionmodshop-14464 жыл бұрын
This is pretty amazing. Fantastic job. I could only wish to make something this freakin cool.
@interlinkknight4 жыл бұрын
You can do it! I plan to make a tutorial on how to build it, including files and links to the things that you need
@ALKUKES7 жыл бұрын
I thought its going to take of...
@paulbennell33137 жыл бұрын
You made a very tidy job of the housing. Some people have commented that it's not a jet engine. No, it's not. It's a simulation in the same way RC model cars are simulations. I used to build things like this all the time just for the fun of it. Nothing wrong with that. Happy building!
@interlinkknight7 жыл бұрын
At last someone that understand the purpose of this project
@herrjonna20078 жыл бұрын
you need to get rid of the thing making that ticking noise :P
@pecak8 жыл бұрын
No 3d printing! You sir have my full respect.
@mozartips7 жыл бұрын
Did anyone noticed that the fan blades are is not even centered. 1:48
@lol-ug2ry5 жыл бұрын
MozarTips me
@Razerin7 жыл бұрын
This should be in stores
@brandongarretson94758 жыл бұрын
If its electric, it is NOT and engine. It is a FAN.
@interlinkknight8 жыл бұрын
This is an engine model. There are car models, plane models, train models, etc.
@MotherRussiaisforever8 жыл бұрын
What does an anti tank uses when it travel 600 feet per second an electric motor or fuel???? An electric engine could be as good as fuel one but much safer. There is no risk of explosion ever.
@brandongarretson94758 жыл бұрын
Its just a fan.
@brandongarretson94758 жыл бұрын
Its just a fan. Stop calling it an engine.
@MotherRussiaisforever8 жыл бұрын
Brandon Garretson ha ha which cave were born in. It is the same fan in the Big boats and that is also called Engine. It is the same fan in small boat and it is also called Engine. Some are electrical some are fuel. However jet is a total different stuff. It is high velocity wind compressed and fuel sprayed on it and then it burns with a big bang. Boat fan are just boat fane but are still called Engine idiot.
@jezzathenugget2 жыл бұрын
dude it’s amazing your video deserves the views
@jackyoung33688 жыл бұрын
How much thrust dose it put out
@interlinkknight8 жыл бұрын
None. Is just an scale model.
@jackyoung33688 жыл бұрын
ok
@jackyoung33688 жыл бұрын
i wonder what rpm it can hit
@interlinkknight8 жыл бұрын
I did measure the speed. At maximum speed the fan goes at 3600 RPM, and the fly wheel goes 16 times faster (57600 RPM).
@jackyoung33688 жыл бұрын
interlinkknight damn
@PhilipX20308 жыл бұрын
Each piece is well-conceived... everyone appreciates thrifty creativity, and the engine fairing, metal prop blades, and instrumentation look top-notch! Thank you for revealing the secrets of their humble origins, which shows the brilliance that following one's inspired vision can achieve! I especially like the ammeter converter from the record player gauge. Good eye!
@tomv33616 жыл бұрын
Mosquito killer
@3DPDK7 жыл бұрын
First of all to InterlinkKnight: A beautiful display and teaching model. The N1 gauge is a cool idea. It might enhance the model to also simulate the N2 and Exhaust Gas Temp (EGT) gauges as well. The shroud is nicely modeled and I'm wondering if it is a custom build or from an RC model supply. To all the previous arguments in the comments below. A jet engine is NOT like a rocket engine. Although the escaping exhaust does account for a portion of the overall thrust the majority of thrust is produced by the rapidly moving air through the engine induced by the compressor (or fan). Today's high thrust engines take better advantage of that by allowing a large amount of the compressed air formed in the first stages of the compressor to bypass the combustion chamber. For obvious reasons these are called Bypass Jet engines. The primary purpose of the exhaust is to drive the "low pressure" turbine which in turn drives the front end compressor. The bypass air serves to cool the combustion chamber housing, it pre-cools the exhaust gasses and produces roughly about 80% of the total thrust of the engine. The Navy S-3 has an extremely large intake compressor and sounds like a vacuum cleaner on steroids. It is a jet engine that could almost be called a ducked fan because of the huge amount of air that bypasses the combustion chamber. On the USS Independence I once heard the Air Boss ask (with tung in cheek) "...so, does an S-3 blow or suck it's way around the sky?"
@interlinkknight7 жыл бұрын
Thanks. As a matter of fact I do plan making another similar model and is going to have a color LCD display that will show all gauges you mention and some more. But that is for a future model engine. To answer you, I made the shroud by hand using body filler, the same use in cars.
@3DPDK7 жыл бұрын
A lot of shaping work indeed! Among other things I am a fiberglass boat builder so I understand the work involved to make the shroud. Nicely done!
@saxachewon80628 жыл бұрын
v1 rotate
@nillesonanthony99337 жыл бұрын
these videos will be the inspiration for so many to dare & do & lot of things to invent for brighten up the future of upcoming generations
@gg86047 жыл бұрын
it looks like hair dryer
@akhmadwahyudi50637 жыл бұрын
hahahahahaa
@ThePixelationWorld6 жыл бұрын
😂
@ThePixelationWorld6 жыл бұрын
@horizonfx so true
@bostoncopter24987 жыл бұрын
WOW your epoxy work looks GREAT.....
@WeskeyTreygon7 жыл бұрын
lol the fan in my PC is lounder than this xD
@interlinkknight7 жыл бұрын
that's sad... but funny... but sad... but funny....
@sarojaparasuraman11235 жыл бұрын
So true but my computer’s fan is much more louder and faster
@superadio17 жыл бұрын
This is a geared turbofan. Example Pratt & Whitney PW1000G. Nice and creative work.
@TechnicolorThree18 жыл бұрын
Fancy hair dryer
@ct924047 жыл бұрын
hey, this is pretty cool! It even sounds like a real turbine engine! Good work!
@AverageAlien7 жыл бұрын
not a jet engine not a jet engine not a jet engine not a jet
@interlinkknight7 жыл бұрын
Never said was a real jet engine. Is just a model
@AverageAlien7 жыл бұрын
***** it's not even a model of a jet engine
@interlinkknight7 жыл бұрын
Train models are not models neither? What about models of ships and planes made by Revell? Car models? I've seen also V8 engine models by Revell, Hawk, etc. Not models, right? I would love to hear your concept of "model".
@AverageAlien7 жыл бұрын
***** that's a turbo fan engine.
@interlinkknight7 жыл бұрын
From wikipedia: "The turbofan or fanjet is a type of airbreathing jet engine..."
@knowall57927 жыл бұрын
The workmanship is really impressive.
@reqinu16787 жыл бұрын
1-A Jet engine is NOT electric. 2-Is a simple fan. 3-Nothing impressive. bye
@interlinkknight7 жыл бұрын
1- A model is not suppose to be real 2- Is a fan... that looks and sound similar to a jet engine 3- Is fun Bye
@ricardopeixoto3847 жыл бұрын
Cosmin Capitaneanu fy
@slashboom1707 жыл бұрын
No , it is against the jet principal u illiterate turd go play gta
@bisonfunyuns49887 жыл бұрын
Shut the fuck up and just enjoy the damn video Goddamn
@IkKorp7 жыл бұрын
u can't even make one so stfu
@Cladcreeper5 жыл бұрын
Cool!
@sean447577 жыл бұрын
that would earn an A in an engineering class☺. Good video. NICE work.
@HyperBassYT Жыл бұрын
If you ignore those gears, it genuinely sounds like the real thing
@fao8315 жыл бұрын
That is so cool, looks like Rolls Royce engine.
@xferretz94066 жыл бұрын
Awesome! Don't worry about it being a fan or electric, it's to really cool
@OzInFl7 жыл бұрын
Hey, thanks for sharing! Im sure it was fun enjoying this with your kids!
@interlinkknight7 жыл бұрын
Yeah. I am not a dad, but my nephew (he it's 5 right now) always love to play with the model. He pretend he is driving an airplane and simulate the flight stages (taxing, takeoff, etc.). I hope this helps my nephew and other people in the world to create similar models, so they can learn about engineering. And it's fun!
@silicon2128 жыл бұрын
Looks real nice. Perfect conversation piece.
@VoraciousAvgeek6 жыл бұрын
0:42 it even sounds like the Trent 700 spooling up!!! That howl! Also it roars/buzzes too like a real jet engine :D
@yondel-kttkoh39485 жыл бұрын
Great job. Im sure soon or later a company will make it for beginners/ commercial plane lovers that dont have the budget to buy a real turbine
@FinnAL237 жыл бұрын
Oml dat RR spool up sound was sick
@karanveernarang8 жыл бұрын
wooowwww.. u made it at home ??????!!!!!! salute...!!!!!!!
@ajojohn3035 жыл бұрын
Wow that's an awesome job bro.. I Being work with cfm56 in daily life, it's so cool to watch this model working as like in commercial airplanes. Nice concept though....!!!! 😍 😍 😍
@ParkerW958 жыл бұрын
Very nice work on that jet engine.
@davsaltego7 жыл бұрын
Wow! You made an electric fan
@fk55805 жыл бұрын
Did you make it? Awesome!
@srvictorbatista5 жыл бұрын
This is amazing!!! Congratulations! To go a RC plane?
@darkdjo7 жыл бұрын
Awesome work, I like the sound it produces
@billgateskilledmyuncle235 жыл бұрын
Somebody sure likes their silicone gasket maker!
@alphamalewolf26168 жыл бұрын
I honestly feel so sorry for those poor bearings. But other than that, nice work, man. :3
@interlinkknight8 жыл бұрын
yeah. the bearings, that are actually just holes, of the flywheel i had to replace with metal because it actually melt
@thatboyben17 жыл бұрын
Stop the hate yes its not a real jet engine. He's not claiming it is chill out. I actually like it bro Didn't know it would go that fast how strong is the propulsion
@CB-RADIO-UK8 жыл бұрын
Nicely done. Good job.
@malcolmclements92545 жыл бұрын
Its a fancy fan that masquerade as a jet engine.
@AROWAYPlaysiscool6 жыл бұрын
Congratulations you made a fan
@arthurchristmas41128 жыл бұрын
that looks real badass. But make the fan a tad bit bigger to fit into the frame better. But seriously. That is really cool. It could fit well on a small RC jet of a 777-300ER!
@stone28895 жыл бұрын
This is really cool! Nice job.
@RFi7318 жыл бұрын
Love the whine!
@AvrahamGS7 жыл бұрын
thats so awesome, i work with jet engines , so i know , this is pretty good. a real engine vibrates a lot, maybe add that
@coriscotupi7 жыл бұрын
Good job on the model! ...Here is an idea that should get you busy for a few hours: don't have the start switch spring back to NORMAL as soon as you turn on the fuel, but rather only after reaching a certain RPM, say 25%N1. It would be more realistic. If you want to make it even more realistic, don't let it reach the specified idle RPM unless the fuel switch is turned on, otherwise make it turn at only starter RPM (around 20%).
@interlinkknight7 жыл бұрын
Yes, you are right that would be more realistic, but this model I show on the video has no "brain" (micro-controller) so it was imposible to do that kind of behavior. The starter switch is mechanically connected to the fuel control. Actually I am already planning to make another jet engine model that is going to do what you mention, and much more. I learned how to use arduino so now I can program that kind of things. But is going to be for the second jet engine model. I will keep my old model as it is. I always prefer making better models, instead of improving old ones. Same for my car engine model. Not sure when I am going to start building the new jet engine model, because I need a 3D printer. But eventually I plan to buy one and build the model. Is going to have color LCD display, reverse, react more realistically, etc. Thanks anyway for your suggestion.
@coriscotupi7 жыл бұрын
Be sure to post it on KZbin if you do get to build it. Seems like a very interesting project.
@interlinkknight7 жыл бұрын
Don't doubt I will post it. I am always posting videos about my projects
@bp_cherryblossomtree7237 жыл бұрын
Me: I got an idea! I use: to cut my carrots!
@RogerDDog8 жыл бұрын
If you were to attach it to an aircraft you'd one heck of a long extension cable to fly from New York to L.A.! I see some commercial potential there... for supplying cable!
@leokimvideo8 жыл бұрын
Send your design to Mr Airfix..because his model jet engine needs a rethink Excellent in too many ways
@inuyasha13898 жыл бұрын
Hey Leo
@interlinkknight8 жыл бұрын
I have no idea what are you talking about
@tomforshaw39338 жыл бұрын
This is rad. Nice job
@interlinkknight8 жыл бұрын
Thanks
@rahulsharma-ek2xm7 жыл бұрын
So cool. Can you add compressor ,decompressor or other stuff which are generally found in a fuel jet engine.Just try a bit.
@interlinkknight7 жыл бұрын
That would be another kind of model. There are a few of models like that on thingiverse that I plan to 3d print someday when I have a 3d printer.
@bt43088 жыл бұрын
its pretty cool but, if you want it to actually work and create thrust, youre gonna need major modifications with adding a lot more turbines, a spark plug, and a propane or gasoline fuel source
@interlinkknight8 жыл бұрын
I don't plan to create thrust. And even if I would want that, would not work because I use materials that can't handle the high temperature.
@odorouswo1f6 жыл бұрын
Congratulations. You just made a very overcomplicated fan.
@bataradharma39945 жыл бұрын
Is it the edf? Electric duct fan?
@eun5oo2804 жыл бұрын
Looks cool for a decoration, Kinda messy though.
@quinnsavage23257 жыл бұрын
GKproductionsHQ I'm glad you caught that, no wonder the public schools have such a hard time educating,garbage in garbage out, iney.Whoo out standing craftsmanship,great idea, I do believe if the designer can void his creation of the rattle sound. One could get their highbypass, audio fix sitting there watching T. V. looks nice.
@boomagovind8 жыл бұрын
really great design brother!! My kind request to post a video in designing one!!
@interlinkknight8 жыл бұрын
information on the description
@Pertamax7-HD7 жыл бұрын
nice sir
@factorone8 жыл бұрын
If you routed the air to a narrow outlet, and moved all the rotating components out of the way, you could actually turn this into a ducted fan motor, that would actually produce viable thrust (not nearly on the level of that of a real turbine engine), but RC planes have used ducted fan motors for years and have worked just as well as standard prop engines, and in some cases, better than them.
@interlinkknight8 жыл бұрын
The reason of making this model was to sound realistic, not to generate thrust.
@factorone8 жыл бұрын
Yeah, totally understand. It looks pretty damn cool, too.
@ichhasseyoutubewerbung51637 жыл бұрын
This is pretty cool.
@Edittname8 жыл бұрын
DAMN!!! SO COOL!! WELL DONE!!
@interlinkknight8 жыл бұрын
Thanks
@thalaajithfc97687 жыл бұрын
Then why didn't it fly?
@johnbarnes12685 жыл бұрын
The one guy got it right, engines run on fuel, motors run on electricity. But it was a nice looking little replica. Did it produce any thrust?
@interlinkknight5 жыл бұрын
It's a toy of a real engine. And no, it doesn't produce any thrust
@franzjosephgonzales56548 жыл бұрын
whoah nice scale model.
@jeffreygonzales39875 жыл бұрын
That really cool ... 👍
@JKTCreation7 жыл бұрын
Lack of the awesome jet sound.
@3DprintedLife7 жыл бұрын
Sir I think you got some turbine in your hot glue. Really nice model though!
@interlinkknight7 жыл бұрын
Yeah, I love hot glue :)
@tongkiparts46727 жыл бұрын
how come a miniature jet engine don't have any THRUST ??? this is just another cooling fan
@nillesonanthony99337 жыл бұрын
Mind blowing Job my friend best of luck for your future inventions
@interlinkknight7 жыл бұрын
Thanks
@NovejSpeed35 жыл бұрын
Came excited to hear a mini jet engine firing up.....left wondering if this is what's inside my Dyson Bladeless fan......
@sultanaljedda36885 жыл бұрын
*At the manufacture*: we need a new engine. This one sounds a lot *Random employee*: my dudes, I have an idea *brings this* *boss* I love this!
@TheErawl8 жыл бұрын
Very cool. Thanks for sharing.
@tf.63826 жыл бұрын
I like this.
@XStarss8 жыл бұрын
Nice work :)
@iamnotamushroom28805 жыл бұрын
Now that is cool.
@dophamduytam5 жыл бұрын
*Nice video*
@thomaswheeler427 жыл бұрын
cool table top model!
@xDieselv7 жыл бұрын
Impressive
@4.0.48 жыл бұрын
You made the fan by hand from the metal of floppy disks? that's remarkable!
@interlinkknight8 жыл бұрын
thanks
@GamingAmbienceLive8 жыл бұрын
if its electric it aint jet
@interlinkknight8 жыл бұрын
+Igor Igor is a model, not a real jet
@GamingAmbienceLive8 жыл бұрын
***** change word homemade to mockup
@interlinkknight8 жыл бұрын
The word "Model" is synonym of: replica, copy, representation, mockup, dummy, imitation, duplicate, reproduction, facsimile. Just so you know. I can add it to the tags, though.