Homemade lathe part 1

Homemade lathe machine for metal. Part 1. The process of making the front pastern.
part 1 • Homemade lathe part 1
part 2 • Homemade lathe part 2
part 3 • Homemade lathe part 3
part 4 • Homemade lathe part 4
part 5 • Homemade lathe part 5
part 6 • Homemade lathe part 6
Part 7 • Homemade lathe part 7
part 8 • Homemade lathe part 8
part 9 • Homemade lathe part 9
part 10 • Homemade lathe part 10
part 11 • Homemade lathe part 11

[@МихаилСтанискин-э7л]

Смотрю видео этого Мастера - как хорошие песни слушаю. И ведь что характерно - весь инструмент у него САМОДЕЛЬНЫЙ - за некоторым исключением. Хвала твоим рукам, Мастер.

[@wangouthangout]

Just that first part.... Thing of beauty. Also you should stick this on instructables and/or wikihow. This is some seriously brilliant diy.

[@patricklockett3625]

Well, there are both negative and positive comments on here. My first thoughts were, who would melt metal wearing sandals and I was quickly very skeptical. While I still believe you weren't practicing very good safety, I work in the medical profession so that's where my head is, you did an amazing job. Unfortunately, being that I'm not a machinist, I think I will have to by one rather than making one myself, lol.

[@BGraves]

This guy just used his own homemade tool to upgrade his homemade tool. Cool work, guy.

[@stanleycarter6275]

Great I'm currently restoring a 1920s lathe and I have to make everything which means this will be very usefull

[@greggroos2271]

It is a homemade lathe: that's his home, he's making it. What do you have to do to get cred? Dig the ore in your back yard? Homemade, DIY, scratch-built, pretty fine distinctions for ESL tubers. Watch all 7 videos, this is some nice work!

[@edwardsteel.023]

I love watching this guys videos. It means more when you make the tools that make the tools you need. Very inspiring content dude keep up the good work!

[@andreygurinovich1065]

Блин мужик, вот сколько смотрю твой канал, прям порожаюсь, вот руки золотые

[@ldwithrow08]

Jeez, guy! You are braver than I'll ever be pouring molten aluminum in sandals.

[@wahoo056]

If he would have splashed some of that stuff on his big toe, he would have went dancing to the next county. Great vid, thanks.

[@cesaraugustogarciaobando1373]

Esto es ingenioso, para ser aplicado en zonas de la Sierra o Selva del Perú; pues son zonas con baja solvencia económica.>>> ¡Felicitaciones al autor de esta magnifica iniciativa casera!

[@golfcartsnogolf4028]

I am really enjoying your videos. Metal casting in flip-flops, I love it! I am surprised you only have 3,148 subscribers with almost 500K views. I would love to see some more build videos. Thanks for sharing.

[@paolobitozzi9209]

Can I ask why you haven't used tapered roller bearings? Meanwhile, I congratulate you on how you works, I follow you from your first video and I always learn something. Thanks.

[@Homemadelathemachine]

I experimented with tapered roller bearings. I did not like, the surface after the cutter was not smooth

[@valeramaga5453]

смотрю я на такой ролик и не чего сказать тут---супер

[@SeasideGuitars]

Seems to me that the head stock construction, spindle drive and where the spindle came from is more important than a bunch of repetitive lathe work. I would love to build my own lathe but I'm not going to start by casting some intermediate piece so that I can bolt it on to some other piece whose construction isn't shown in the video.

[@miguelcastaneda7236]

redwelter2009 well lets see your skills...any pics..?

[@pacowang283]

I watch this amazed at your resourcefulness, ingenuity and skills. Wow sir!

[@genkidama7385]

i like when it starts with the homemade forge. So good.

[@jacoblattimore5434]

I always wear sandles when pouring molten aluminum.... All safety concerns aside nice build man 👍

[@guidosamson682]

Very clean work. You should build to sell my friend

[@I-Understand-I-Exist]

U used a lathe to make a lathe, u sir are a genius

[@douro20]

If I were building my own lathe I'd probably mineral-cast the base frame. It is a simple and effective way of making an extremely strong base.

[@nedjeljkokaloper9984]

douro20 .

[@bradyrose]

what is a mineral cast?

[@bradyrose]

ahh nevermind, epoxy granite

[@bobbystanley8580]

I love the sandals and melting metal!

[@glenking3337]

Did you build the drill press also? I like it.

[@Homemadelathemachine]

Yes

[@SauronsEye]

How to make a home made lathe. Step 1: Get a lathe.

[@obi-wankenobi9871]

thought the same

[@GeetarGaz]

+SauronsEye The other lathe looks homemade to me

[@golfcartsnogolf4028]

+SauronsEye Or borrow a lathe. Or build a simple lathe to make a nicer more functional one. If no one ever built one without one how could there ever be one?

[@TheCyclonesEye]

The only tool (other than a hammer) that can make itself.

[@ovais909]

+Golf Carts no Golf! Well its quite simple, if you dont have a lathe All you have to do is make a really simple lathe from wood that has wood gears and is powered by an other person or using a windmill, you can use the lathe to make a really bad iron lathe then you will use the iron lathe to make an other lathe that is much better then the first one you would have to repeat this until you have a lathe that you are satisfied with !! Ofcourse in modern world you dont have to do so much work because all the tools and machine are already available for so much cheaper and are also more accurate

[@marceltimmers1290]

Hi mate. Well done with some very modest tools. Keep going.

[@random5147]

Nice job man. Is it for wood turning or metal. I'm looking to make my own. How much weight do you think that spindle could turn

[@alfredoenargas5026]

Nice group. How far was it shot?.. Excellent video.

[@luisrivasgesell]

excelente trabajo digno de mirar todos los videos

[@stabbyfishfloundergigging1162]

Dude - molten metal and sandals?

[@Homemadelathemachine]

The real man is not afraid of molten metal))

[@TheHuntermj]

Correction "Safety" Sandals

[@chyrt]

I would wear some good shoes when pouring metal, but you are a real profession and you totally know what you're doing. you are btw a real man because you made a lathe. good job, keep on working.

[@ldwithrow08]

I wouldn't work with anyone too stupid to be afraid of molten metal.

[@drhender6943]

Real men know the difference between bravery and carelessness.

[@GeetarGaz]

Could you do a video showing your pillar drill? looks like a pretty cool design..is it just a rack and pinion ?

[@baronbarbaron]

I strong recomend you to cover the terminals of the motor with something. But keep going :)

[@PaulDesmondimakewoodthings]

This is very cool man. I will keep watching for more

[@pistih.2265]

Nagyon jó! Igazi barkácsember!

[@YT-User1013]

Wait one minute, you use a homemade lathe to make a homemade lathe? I'm screwed...I don't already have a homemade lathe!

[@SirDrakeNewcanon]

Really simple! If you can make a not so good lathe, you can made a vetter one with that! :-)))

[@barrycass4604]

that cool work nicely done hope to see more

[@Imwright720]

It’s so funny how many people make lathes using a lathe.

[@gripWIN]

I hope you are Planning to do an equivalent on VERT. MILL. Thanks...

[@Timmanurs4]

Well done! Impressive work!

[@davideliasfloresescalante8840]

but, WHERE IS the part when you build that "green monster" ??? PUt that please

[@nothingwrongwiththisname2313]

Why is the 1st Alu cast made so thick? then u shaved off 3/4 of it to make that part.

[@chrisball3634]

Hmmmm..molten metal and open sandals...interesting!!

[@Homemadelathemachine]

well and what, sometimes it is necessary to work so.

[@aubreyaub]

Nice stuff.!! Question. Do you find the quality of the aluminium, after casting, to be quite different to commercial stuff. Seems to be a bit more brittle....?

[@Homemadelathemachine]

+aubreyaub Aluminum lower quality, is not as strong as industrial, but for my purposes this is enough.

[@manofkentcatapultsgunsando5069]

Homemade lathe machine Forget the negative stuff on here mate you have real skill with modest equipment you put a lot of so called engineers to shame here in the uk.

[@mudassarbebji835]

Can u share drawings or plans... I want to make same lathe machine for my workshop

[@superraptorproductions5452]

Hi, will you show how you made the bed ways and saddle on your big lathe? It looks intresting

[@Homemadelathemachine]

+Kani nar Hi. Write your email address, I will send you photos.

[@AlekseyCamodelkin]

Крутая работа ...

[@sitio_da_arte]

Fantástico.... belo trabalho.

[@kavishsahadeo3797]

any ideas on plastic injection moulding

[@losteroni]

If you can hear the spindle turn there is too much play in the bearings . Good luck though !

[@alessio55555]

what's type of metal molten in this video? Aluminum?

[@heru-deshet359]

That is bad ass, but it would be much easier (and cheaper) for me to buy a used one, lol.

[@marksolivan6685]

What do we do about metal fatigue

[@leksey7870]

Good work!

[@cabrauzimm]

nice machine over there

[@mahmodnedal8461]

مممبدع من المقدح اللي مفصله

[@gravelman5789]

Inspiration!!!!! 👏👏👏👏👏 Thanks!!

[@80amnesia]

Perfect! nice job!

[@jhonnyginting8985]

ah..just order it from the coffee shop nearby... a coffee lathe...hehehe...cheap too

[@capnskustomworks]

Awesome, and inspirational. Good on ye, brethren!

[@headknocker8999]

Looks to me like you have a lathe to start with?? Homemade lathe??

[@Homemadelathemachine]

+Headknocker The new lathe machine was manufactured using a different homemade lathe machine.

[@jerry1378]

he has a cnc lathe to make the first hommade lathe to make the hommade lathe you see

[@jansy7899]

Headknocknpm

[@hpschulz2873]

what kind of metall is he casting?

[@KennethScharf]

Gingery inspired? Proof that a lathe can make another lathe. Was that drill press home made?

[@Homemadelathemachine]

+Kenneth Scharf All details of the new lathe are made on other homemade machines.

[@JagdtygerII]

You know, it might just help if you explained exactly what you are doing at each step of the project. I am a Machinist by trade and I actually have to think about what you are doing in order to understand your design

[@peepeedoodoo8590]

JagdtygerII machinist as well. I understand perfectly well. Maybe he’s like me and many others and has a hard time explaining and an easier time demonstrating

[@73superglide62]

here did you find your chuck

[@juliocesarcalderon20]

Hi, what size is your chuck, and what engine are you going to use?

[@Homemadelathemachine]

Hi. Chuck 100mm, engine 1.2 kwt

[@whitenorthstar]

Good job!

[@wrenchesinthegears]

what grade/ where did you source the ally?

[@nurettinozen7951]

Bunların seyrini doymuyor insan.

[@PainterRP358]

Вячеслав, Вы уверены, что именно вы сделали этот токарный станок, или вы купили его, разобрали и перемонтировали все, чтобы показать ваши туалеты. Работаю очень хорошо, поздравляю. Будьте счастливы. Освальдо Южноамериканский друг из земли под названием Бразилия.

[@Homemadelathemachine]

Почему вы думаете что это не мои работы? Все что есть на этом канале было сделано мной.

[@SierzantYelonek]

First i thought late like a coffe . Any way how to make a lathe without lathe ?

[@I_leave_mean_comments]

Step 1 in making lathe: use lathe to make first part. Um... something seems wrong here.

[@rochmeca4790]

Hi Zeet did U realy shed one eye on the lathe ??? it's also a maked lathe my friend!!!!!!!!!!!!!!!!!!!!!!!!

[@rsz90182]

Who made the first Lathe before any existed? Ha ha got ya !

[@luiz--edz8868]

very good.

[@avleerxo]

Great, wath size is your chuck?

[@Homemadelathemachine]

100 mm

[@faroukabd5293]

h!!!! the lathe that you are turning with is homemade?

[@Homemadelathemachine]

yes

[@innovation1153]

رائع

[@rickybulao5112]

The power of sendals

[@actorzone856]

he's making his lathe in the same way the Chinese make their lathes, I like the drill press, we have a scrap metal company which sells to the public and they have loads of good stuff, also bins full of laser water jet cut steel offcuts just about everything you would want for projects, you would have a field day there.

[@habiblouati1333]

bravo

[@ธนวรรณทับทิมทอง]

tony coppe

[@baileymoody3916]

1:12 dont know what im gonna doouuooouuuoouuuooohhhhh ~~~yodeling walmart kid

[@user-gr7ck7gn5w]

Подскажите, пожалуйста, высоту передней бабки от швеллера до оси шпинделя?

[@Homemadelathemachine]

210мм

[@chinnaraj6398]

how to make thread chaser vice and hyow worke

[@confushiarch3421]

if you already have a lathe why make a lathe? also i would use 3d printing to make moulds for that myself if i was making one and my it was summer again so i could run the forge... I may do that... one can make excellent moulds using sand and Sodium silicate then when the sodium silicate binder sets you can burn out the plastic or 3d printable casting wax if your being fancy and get a nice sand mould you can then pour into... Admittedly the lathe would probably still be good since with 3d printing you never get perfect circles just a roughly rounded polygon I am onestly surpriced all the aluminium did not all pour out the way you cast that thing... but good idea not to do that over cement.... that is a good way to get exploding cement propelling molten aluminium all over the place...

[@abdallaelhagef1090]

Please where did you get the piece which hold things thanks

[@Texaca]

I was thinking the same thoughts when I was watching the video. Looks like a lot of the parts, such as washers, bushings, and gears come from motorcycle transmissions. I would have never even thought of using that. I live in Tyler Texas, and looking for stuff like that here, isn't easy. There are very few salvage or junk yards, that will let you scrounge for hardware, and those that do, charge to damn much for their crap!

[@ExtantFrodo2]

Keep your eye on Craigslist for throw away cars and such. It may be cheaper for you to buy the car for parts then selection the remains to the junkyard. (Beat them at their own game)

[@ZAPION32]

amazing!!!

[@panchovilla1486]

Good job

[@zoesdada8923]

So to make a lathe you need a lathe?

[@Homemadelathemachine]

Yes

[@robertschumann9059]

man. nice skills but Pay a BIT more attention to working safety!

[@aziem462]

u need PPE..nice work though

[@o11221138]

فنان 🖒🖒🖒🖒🖒🖒🖒🖒

[@HermanOtto-wr2nn]

Forma musi być skręcana a dolewanie do stygnącego aluminium to porażka to nie zupa na talerzu hahah

[@Homemadelathemachine]

part 1 kzbin.info/www/bejne/e16kpGeqeqiqmbM part 2 kzbin.info/www/bejne/ppPHh5SeZ9Grhdk part 3 kzbin.info/www/bejne/l4PUZoCOad1mhKM part 4 kzbin.info/www/bejne/r5WyhWmAhsR-Zqc part 5 kzbin.info/www/bejne/hKbMYqefiqmeatU part 6 kzbin.info/www/bejne/hHm8kmaNm8yWhrs Part 7 kzbin.info/www/bejne/rqKbhXZsrqmjfpo part 8 kzbin.info/www/bejne/onXKnpKBq8SCgKM part 9 kzbin.info/www/bejne/e5XckGSgepyJpKc part 10 kzbin.info/www/bejne/oZKlf3dvbcmVjZY part 11 kzbin.info/www/bejne/h5K5mqWvoqpsnc0

[@mudassarbebji835]

Price of lathe machine

[@fernandomaldonado6300]

exelente el calzado para fundir , sin hablar de los pantalones , será que este individuo no a visto la herida que causa una gota , de material fundido en la carne

[@user-ew9uk8hi6u]

Привет!

[@Homemadelathemachine]

Привіт

[@michaelhaiden6718]

wonderful if i had a lathe then i could make another one and call it home made

[@cjgreen3836]

What came first, the chicken or the egg?

[@imadrayan5380]

Bravo

[@НикитаСемёнов-у7л]

Заморочка с литьём алюминия можно было поршень от трактора сточить так

[@Homemadelathemachine]

Заморочки це шукати той поршень по всіх розборках та металоломах. Легше самому відлити та виточити.

[@jtbmetaldesigns]

Only real men cast aluminum with sandals LMAO!

[@alambiquemejico8800]

were are you from

[@Homemadelathemachine]

from Ukraine

[@westharti8132]

A spindle without through hole is useless.

[@edclark9064]

Now try making it without a lathe.