Homemade light forklift stacker

[@CALDues]

I watched this on my TV awestruck that your lift telescoped. Then it went to the next video and I spent the next 45 minutes trying to find yours again. Would love to see a build or even just a reassembly. Well done and thanks!

[@RoadSafety1]

It's definitely the lightest lift I've seen. Exactly what I was looking for!

[@vvvwwwvvvv1]

Хорошая задумка, и исполнение на высшем уровне.

[@asifalimanagoli4189]

Sir nice work can i use this for oil drum for lifting on truck

[@cszrwi]

NO problem. I have lifted 300kilo on mine. You should test with double the load you need before you start to use every day. I would recommend that if you are going to be regularly in the 200 kilo range that you choose a heavier steel for the main vertical rails where the bearing run. Those are where the steel might twist.

[@pinkysondhi6153]

Can we put it in our second floor, which is top floor varandah to go to the roof?

[@Fergibaby1]

Thank you for a very clear demonstration of your impressive build. I was researching this concept and this was one of the best videos I've found. What height is your mast sections and the cable length please ? and in practical use what max lifting capacity feels safe when at max height ?

[@cszrwi]

Nothing is safe. You need to stay well clear of it unless you have done your own tests. I have tested mine with 300k and it was not the max. The mast min is short enough that it will go under the back hatch of my van and full extension is high enough to reach the doors in the video. You can make any size you need. The standard cable that came with the winch was long enough for me.

[@pauldean5458]

Do you have plans for this forklift? What weight can it lift

[@cszrwi]

Weight depends on what you use for the steel. Mine is only light you will have to test yours before you use it. I have used mine with 300kilos. No plans sorry. I made it short enough to go under my van hatch and high enough to get to the top floor of my barn.

[@derekmoen5382]

Well done!! People like you and the things that you people all build is the reason my wife doesnt get the house finished lol. I desperately need to build this i got several lighter items that i need to put on some racking and its fairly room limited. Would be sweet if i could see how you connected the mast inner and outers together. You did a damn nice job!!!

[@lescherry458]

Impressive! Nice job!

[@cszrwi]

Thanks, its really useful to have around. I used it the other day as a platform to empty the rain gutters.

[@VVip-vip-vip]

какая грузоподемность ?

[@michaelprince814]

Very clever!

[@plasmaguy5]

Awesome build

[@13756]

撑高機危險指數在於焊接之處，未有甲級技術証照者，勿模仿，看看就好

[@adamalimam8294]

how many meters of cable sling

[@cszrwi]

Depends on how big you design your stages but you can simply multiply by 7 and you will have enough.

[@sureshgulati8985]

Kya ye safe hai

[@miraytavsan5415]

hello i am a student and i want to draw this forklift can you give me your measurements?

[@cszrwi]

Hi Miray, I never made any measurements sorry. I just built it by eye. It’s short enough to go under the hatch of my VW t4 and it’s narrow enough for the forks to fit in a E pallet.

[@cck0728]

Good video....Can it be made battery driven? Thanks.

[@cszrwi]

Yer i have swapped the winch now fir 12v and put a car battery on the tray at the back. My problem here is my ground is not so level so i nerd to increase the ground clearance. Would be cool to have jack up wheels like a pallet truck.

[@evgeniidolbnew5578]

Класс супер👍👍👍

[@movitecnicapaleteiras9570]

muito bom me manda o projeto por favor

[@SanthoshKumar-pb5wc]

Full video pls

[@lewisbriffa4715]

Where is going use it and carrie how many kg's no use

[@cszrwi]

I use it at home to stack pallets and put things into the first floor of the barns. I have lifted 300kg to about a meter and that is a heavy as i need. If you need heavier just use thicker steel for the channels. It is the channels that deflect the most.

[@damsannguyen]

How many kg it can lift.

[@selamlaut8165]

I cant say about the mechanical metal frame. But I got that very same motor he uses in the video. The factory claim can lift upto 300kg.

[@gregorydahl]

That is good .

[@engmuhaiman6178]

Hi my friend I'm mechanical engineer muhamian faleh from Iraq Babylon ..I need dimensions for this fork lift please

[@cszrwi]

Hi I just made it free hand. The height is just enough to fit under the back hatch of my van and the width is just enough to get in a pallet. I think it’s a little tight, too wide. The vert profiles are a little too lite. But enough for loading my van. One thing I need is more ground clearance. I am trying to work out some mechanism to jack the wheels down a little once it is loaded. Because of safety I don’t want to give out any dimensions or even recommend a build. This is just for me. If I chop my hand off then it’s just my fault. 😊

[@sydneyhoward3754]

@@cszrwi but you can give me dimensions to my email so i do for myself. i live in nigeria so if i chop off my hand then i take full responsibility. ?

[@cszrwi]

@@sydneyhoward3754 hi Sydney, I don’t have dimensions unless I go outside and measure it😀 which I might do in a bit. I very unwisely had to lift 500 kilos with it to unload a trailer last week and it worked great. Those little winches are amazing. I used a horizontal off road winch that has a high capacity but no safety features for verticle lifts. Don’t do that, use a vertical hoist with a proper brake etc. I made it too wide in the forks so some pallets don’t fit. But all Europallets seem to work. Also the u profile I used for the main verticle rails is not heavy enough. Could be a mm thicker. The other thing is it needs some kind of bearing at the top of the main vertical rail to stop the next section from trying to pull itself forward. I just have two steel tabs because I did not allow any clearance but it needs a bearing on each side or at high extensions it tries to twist forward and opens the rails a little. I just wanted to get my speakers on a pallet and in the van so I don’t have to keep loafing them every gig👌

[@sydneyhoward3754]

@@cszrwi ok i would really appreciate it. i just started my brick moulding factory and would like a lift like this to load my bricks into my van

[@techworksinfo]

Good work bro

[@cszrwi]

Thanks, I will finish it one day. It is very useful even as it is. I have unloaded a 300 kilo bandsaw with it and it had no problem with that. I am thinking of making a lift mechanism for the rear rollers to add ground clearance. I don't have flat ground here and sometimes it bottoms out. Maybe I will make a v2 version with everything I have learned. Time is always the problem.

[@castherman396]

Excelente cargador.

[@edisonleite6040]

E quanto custaria em real um elevador desse

[@houston5544]

Hell yea dude!

[@carlosbecker8759]

Muito bom trabalho

[@Tiemsatgiaphat]

Very good

[@ArcellMunjul]

Cek lokasi

[@forveillethierry4752]

Bonjour j aimerais construire le même projet pouvez je avoir le plan svp merci

[@alexanderhurtadomartinez1387]

Dónde lo encuentro..b tardes

[@edisonleite6040]

Gostaria de saber se faz por encomenda

[@tp3648]

Mega ich bräuchte die Skizze

[@anecitocuanico1662]

How to make it

[@sungju58]

Very good~!!

[@cszrwi]

Thank you Sir. It is actually very useful. I want to add a ground clearance / wheel lift feature to the back rollers so I can get over rough ground. I still have not fully welded it and painted it yet :-)

[@Keluargarohadichanel]

Top

[@vijayparekar5404]

Adress

[@federicobaravalle6920]

mi potresti dare le misure di h? grazie

[@divya1494]

How much price

[@edisonleite6040]

Tem algum número para contato

[@user-fm7su4uj2m]

👍👍👍👍👍

[@rolo9899]

Dum ways to die episode 😂

[@cszrwi]

I agree completely. I am no were near it if it is high or it has any weight on it. Its an adult thing. I don’t need someone holding my hand on my own land. I come from a fishing family. I take my safety seriously.

[@justwatch1413]

Hacı bu iş yapmaz.devrilir

[@nsvipjamku]

12 MITAR HIGHT 100 KG WET

[@정삼-x1t]

연락처?

[@정삼-x1t]

제품구입을하려면?가격등

[@هشامالغامدي-ه5ك]

أريد مثلها

[@edisonleite6040]

Sem o motor claro

[@antontrio6517]

Sorry..not stable..

[@cszrwi]

This one is super light and because i spread the legs at the back out it is actually quite stable. The design needs changing for heavier weights. Needs to have rollers on the sections not just rollers on the carriage. That means leaving space for the carriage to pass them. But i have found even this light version super useful. Also i think a more closed u profile for the rails would help as well.

[@darshansingh8343]

You are call n

[@piotrstefanski2608]

Weź widły i idź lepiej gnój rozrzucać po polu, nie marnuj matriału i pieniędzy

[@nikeshbhoyar8629]

Apka contact number milenga sir