Homemade mini yacht from scrap yard part 2

Homemade mini yacht from scrap yard part 2
I build my own mini yacht for free with materials from the bottle yard

[@MrJohnmichael33]

Someone buy this talented man a welding helmet.

[@tna--]

i was about to write the same thing lol his hand protection trick is scary

[@cycoholic]

Hopefully someone will sponsor them and give them a set of welding helmets, or at least, goggles.

[@nagamus]

He probably wouldn't use it!

[@cycoholic]

@@nagamus Probably right. ☹

[@christopherdoff-sotta4441]

AMEN THE WELDING HELMET AND GLOVES WOULD SAVE HIS EYES.

[@user-oi4bz4hr1c]

Крутая работа! Дам несколько советов с дивана. 1. Ролики на тросик управления рулём нужно было хотя бы на фиксатор резьбы посадить, очень важный узел при постоянных вибрациях открутиться в самый неподходящий момент. 2. На помпу охлаждения двигателя нужно было хоть какой то грубый фильтр поставить, если так оставить рубашка охлаждения быстро забьется мусором из забортной воды. 3. Как уже ниже написали, опорный подшипник на вал винта нужен, нагрузка идёт прямо на коленвал, это не хорошо. 4. Ну и сварочной маской конечно нужно пользоваться, это не дело ладонью закрываться.

[@absoltd7490]

@@lost_dream Он сварил намертво семеринг и подшипника сторону винта, вьi какие-то то ерундьi обсуждаете...

[@frederichrecinski4616]

eMeM..., Abso Ltd, et Bobii DM, Vous êtes Russes 🇷🇺 ?? 👎🏻😡

[@absoltd7490]

@@frederichrecinski4616 Je suis Bulgare si ca est tres important pour vous...

[@imboondockrider6858]

А так же гребной вал с ржавыми кавернами,который сальники удрочит в момент,рабочая поверхность не полированная.Я надеюсь что хотя бы хомуты на патрубки системы охлаждения он в последующем поставит.Хоть какой-то трюмный насос нужен...

[@user-Poliarnik]

матор без подушек поставил, или мне покозалось?

[@elvisonredbull7370]

What a guy! Things I loved: - Only saw a tape measure once. - Welding and cutting in bare feet or flip flops, what a savage! - Using available material to create the thing that he wants. He is a true genius that can look at stuff, think outside the box and make it happen. My hat is off to you sir, great job!!

[@pgal64]

you forgot his welding helmet jaja

[@BXtremP]

This is good thinking but very poor execution. I wouldn't step foot on that boat, and I doubt it's gonna last, but hey a poor guy is making his dream boat with only sloppy materials, let's not break his dream.

[@teeanahera8949]

He may also go blind from not protecting his eyes when welding.

[@richrocks1516]

@@BXtremP This stuff is going back where it came from lol

[@slukky]

You anticipated different? He's Vietnamese! Failure isn't in their vocabulary.

[@user-dg4tu9lj1d]

Настолько интересно, что я даже подписался! Мастерство твоих рук и сообразительность просто поражают! Привет из России и удачи в окончании постройки!

[@mr.k6136]

Hello from the USA I just want to say that you are very talented and you give me inspiration to do things that I never thought could be possible thank you for the videos and keep it up

[@restorationzippo9719]

Thank you . He is from Vietnamese 🇻🇳🇻🇳🇻🇳

[@kosamotovlogs]

Thank you. Please support us. You can also donate to our paypal. And help us continue our journey

[@fenderstratguy]

We got to crowd fund him or get DeWalt or somebody to sponsor him. He makes the coolest stuff out of literal junk and his videos are super fun to watch.

[@michaelscrivani2721]

He should be teaching !

[@MrZiploc1]

@@restorationzippo9719 He is from Viet Nam.

[@artemli723]

Красава! Как у нас говорят - Очумелые ручки!!!)) респект

[@user-ye7mw2rw6q]

Тросик с роликами не очень хорошее решение , оторвутся ролики при нагрузке или ударе

[@nhut2020vovan]

​

[@nhut2020vovan]

​@@user-ye7mw2rw6q0⁰0

[@alexandrruzakov452]

Вот это завораживает, можно бесконечно смотреть как работают другие!!!!

[@ChrisLee66]

Being a man, nothing brings more tears to my heart and soul after watching current world news media than video such as this. Thank You sir!!

[@PeterColmore]

Very clever man. You really need a welding helmet or Google to protect your eyes. Can't wait for part 3

[@dhabangiemmanuel4505]

You could actually gift him with one. 😂😂

[@vegetablesoup777]

Engage the safety squints!

[@MrWalkingparadox]

Mr hô is amazing. Not only creative, but for being one of the first openly gay content creators in Vietnam. We love you Mr hô! Stay strong! Very proud of you.

[@thaidinh3443]

ông nội này công nhận giởi thật. thợ điện, thợ tiện, thợ máy, thợ làm đồng...[ vẽ được autocad nữa là thành kỹ sư hoàn hảo rồi ] video sẽ rất chuyên nghiệp,...

[@ngochuunguyen5345]

Bạn thông minh sáng tạo HƠN CẢ NGƯỜI MÁY , MÀ NGƯỜI MÁY LÀ DO CON NGƯỜI TẠO RA, vậy là bạn là người CHẾ TẠO RA NGƯỜI MÁY, vậy là bạn là BẬC THẦY CỦA SÁNG TẠO, rất nhiều người nước ngoài vào BÌNH LUẬN, bạn đã làm HỌ CHÚ Ý bạn, ngày TỐT ĐẸP sẽ đến với bạn, chúc bạn nhiều sức khỏe và làm việc CẨN THẬN nhé.

[@mikemanning3388]

This is so awesome! Thanks for sharing this amazing build

[@sangphamngoc7321]

Người Việt Nam mình thật tài giỏi !!! Chúc sẽ thành công nhé 👍

[@johnnyjohn5506]

Everyone talks about the engineering but what about the camera work and editing. Mad props to you sir! BRAVO 👏

[@tgoraj70]

I start to doubt his methods but always regain faith after seeing these creations blast across the water. As always I am mesmerized by these videos, can’t wait for part 3!!! Amazing

[@ubegrijpt8131]

Hoog houtje-touwtje gehalte.

[@Roberto-oi7lm]

Beautiful effort. One suggestion. Consider extending the exhaust pipe down at a 45 degree angle for about 20cm and injecting the cooling water outlet into the exhaust pipe at that point. From there you can use a large heavy duty rubber hose something like a large radiator hose to send the exhaust out through a hole in the transom above the waterline. The cooling water will reduce the exhaust temperature enough so that the hose will not burn. You could also use a fiberglass tube, but I do not think ordinary PVC pipe would work. This simple change will make the exhaust much more quiet.

[@Chicam_]

This man is smart lol

[@PrinceEdwardIII]

nah forget that, straight pipe that mf into some sick smoke stacks from a semi truck

[@Anonymous99997]

The ingenuity of the Vietnamese never fails to astonish me. Good job.

[@halfcenturycatfishing9800]

You are amazing at building with your hands and your mind . I hope you build your own company and change the world with you talent . Good luck with your builds . Half Century USA

[@sergeiveresk4134]

Спасибо за вашу работу, очень познавательно!

[@user-ye7mw2rw6q]

Василий почему не используешь опорный подшипник но валу он будет опираться в крестовину и коленчатый вал двигателя а это не правильно так как уменьшается ресурс нагруженых агрегатов это же не одноместная дженка а полноценный катер ???

[@chesterkane9394]

Да он много чего не делает профессилнально, похуй, главное контент

[@namtech425]

Good job so far, if I may make a few suggestions. Your propshaft to the back you encased the bearings and then welded them shut, that makes maintenance very difficult. Then you have to make stop plates with some type of rebound system for the steering, otherwise those cables will not hold up for very long. Further more you are doing a very good job keep it up.

[@kurt7873]

He’s making due with what he has, this is not a forever boat, his talents are nothing less than amazing

[@briancarolina3081]

Maybe he can put a grease nipple and be done with it

[@joshbatt7820]

After watching meny videos from this part of the world, making anything from replica supercars to homemade yatchs. These people are so talented, especially considering its all done with very simple tools and normally done in a pair of flip flops is absolutely inspiring! Could only imagine what they could do in a very well equipped workshop! Let's be honest who thought that engine would ever be salvageable.

[@maryloutetreault1650]

You are incredibly gifted ! Your craftsmanship is absolutely amazing. Thank you for sharing this with us

[@manuelalcaraz9305]

I’m also from the USA and I want to tell u that ur an amazing person very talented and smart . The only bad thing is that and I want to speak for everybody else watching u build the boat, the bad thing is that we gotta wait so long to watch the next episode we all can’t wait to watch how amazing it’s gona turn out to be n look. 👍🏻

[@rhtball]

I totally agree, can't wait to see the finish product...

[@rorysavanah655]

Yeah me too my friend

[@BackToTheFutura]

I can't stop watching! Building this boat from what's in your head is amazing! I can't wait to see the next video! I rarely subscribe to these videos but you got me. Thank you for the entertaining video...looking forward to Part 3!!!

[@zaurbekahomgotov5441]

Залитые руки!! Красава, Молодец.

[@mcspikes1]

The unbelievably talented and resourceful M. Ho does it again. What a guy !

[@whodareswins18]

Absolute savage. Pleasure to watch. As a professional mechanic these are the things I want to do but never get to do in the repetitious servicing and repair of modern vehicles.

[@freakinyankee]

Imagine if he was in a real shop with proper tools. Absolutely amazing what he built.

[@MrRandyj72]

On your turning pulley at the rear of the boat, weld a cover over half of the unit on the back to enclose the cable on the pulley so it can't jump off. You can always thread the cable back through if needed

[@robthomas5488]

I was thinking guide loops welded on the pully disk to keep the cable on the groove , and keep air flow on it so the cable can breath and dry out, and can be easily lubed if needed. The guides would keep the cable in place also.

[@donny0742]

Absolutely brilliant. You my friend are absolutely brilliant. Thank you for sharing. Respect from Las Vegas NV USA 🇺🇸

[@joebacero9483]

You're amazing, looking for the last part 3.

[@hoangducnguyen2340]

Tay nghề cơ khí của anh quá tốt

[@chinamannomad]

Absolutely fantastic Mr. Ho, you are truly an amazing craftsman, mechanic and all around creator and restorer 👍🏼 Thank you for sharing your build journey with us!!! And yes, echoing others here, we have to get you a welding helmet to protect your talent for years to come 👍🏼

[@user-vq8oj5lm1t]

Шикарно Брат, желаю тебе сил закончить этот тяжёлый проэкт!!! Вложен титанический труд, из говна получается просто конфетка!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

[@fasteddy4077]

I truly enjoy watching creative people build amazing things. This guy is by far the most amazing individual I have ever seen on KZbin. I am way older than him but would seriously consider being mentored by him. A very gifted individual.

[@AA-co8de]

BRILLIANT! Absolutely brilliant! Now I have to wait for part 3…. I have not enjoyed something as much as this, I still remember the crusty turbo from part 1. And no new parts, reconditioned and brilliant engineering. As a boat owner and engineer, I love this!

[@cheloveksbaikala8367]

у меня больше сомнения по поводу охлаждения двигателя. уже написали про отсутствие фильтра для воды, он крайне необходим, но у меня вызывает еще вопрос вот что: у вас же там море, а значит вода соленая. как можно охлаждать соленой то водой? она же нагреется, соли будут выпариваться и соляные отложения будут по всем каналам блока дизеля, затем они забьются солями и пойдет нарушение циркуляции и перегрев двигателя. в данном случае оправдано охлаждение по замкнутому контуру, к тому место в катере за двигателем позволяет разместить полноценный радиатор для охлаждения и даже расширительный бачок для воды влезет.

[@Snipe4261]

I love how his welding protection consists of a single cotton glove and blinking at the appropriate moment.

[@caveman69_]

who needs a welding mask when you have the old "cover it with your hand" trick

[@buckmurdock2500]

and his welds come out better than mine, lol

[@1BYEBYE1]

@@buckmurdock2500 except they won't because he's tacking the pieces not welding them.

[@grandsoleil56]

Engage safety squints 😆

[@stanleythompson5321]

If your eyes are slanted also helps.

[@user-sk6dn7jg5w]

Если бы я не увидел это собственными глазами, я бы никогда не поверил, что есть такие гениальные мастера!

[@davidhudson5452]

Your Toyota Boat you need welding glasses dont kill your eyes so much talent waiting for more

[@andrewlarkin3074]

Yip I was all ready to say the same thing

[@davidhudson5452]

@@andrewlarkin3074 Isnt the first time hope he listens

[@salepupils3095]

Đeo kính hàn là tốt để bảo vệ đôi mắt khi thi công, nhưng trong trường hợp bạn thấy . Anh ấy khi hàn, khi anh ấy hàn ở điểm cần hàn khi chạm múi hàn thì anh ấy đã nhấm mắt lại , điều quan ngại ở đây là khói hàn

[@davidhudson5452]

@@salepupils3095 Its both i cant weld with eyes closed the smoke is a problem

[@salepupils3095]

@@davidhudson5452 , ở đất nước tôi, rất nhiều người hàn theo phương pháp như vậy ! Nhưng lâu dài không tốt cho sức khoẻ

[@MsRybak1]

From the state of Ohio in the USA. I am so impressed with your talent. I can’t wait to see the finished product. So nice to see things repurposed. You are a mechanical genius.

[@chuckdarcymackay9761]

You Sir are the most talented engineer I have come across on you tube. Thank you sharing the work you do.

[@calhun4481]

As a TUAV engineer, I highly respect your amazing work. Innovative, Creative, Engineer....Awesome...million like!

[@jameswarren423]

You truly are a very talented man and have come along way on this project! You’re creative ability and ingenuity are just amazing I can’t wait to see this when it’s finished! And please be careful with your eyes ,not wearing a welding helmet when welding can burn your eyes !so please be careful and think about getting a helmet ! keep up the great work sir!👍🏼🤩🙏🏼💪🏼

[@tru83fulnuffsaid71]

Love the stuff u make on this channel and wish I lived out there with u so I could visit or maybe buy a boat off u!

[@francozedda8510]

I think your work style is incredibile...is like all simple for you, but i now that is not for us...normal people....great great great job...Franco from Sardegna , Italy

[@foxisretrofitting4556]

Using the Toyota seat and column on this build really tied things together. Looks great.

[@xxalmightyxx2304]

All this while using old rusty tools. Just amazing!!! This guys are very talented 👍🏼🔥

[@Toby_the_Glen]

Old rusty plasma cutter, still stand, lathe, welder too?

[@alexanderguesthistorical7842]

Really, really clever!!! Some ingenious engineering solutions on this fantastic up-cycling project! I'm glad to hear you used all stainless steel material to fabricate all the bracketry, like the steering column pedestal, so it won't all rust away in 2 weeks on the water. And that you used good solid METAL pipes for the engine cooling pipework, as it carries water at over 100 degrees centigrade, with the engine right behind the seat. So that nothing can accidentally break or split the coolant pipe and spray boiling water everywhere. You did say that, right???...........Oh! Good luck whoever wants to narrowly escape death riding on that then.

[@nhangontienhuynh]

Việt Nam sao nhiều người giỏi đến vậy! amazing gút chóp. Xin nhận em 1 lạy

[@user-ij5gk4br2p]

Молодец,наблюдаю за твоей работой с Сибири.

[@kelvintawhiti9577]

This guy is one of the best engineers I have ever seen awesome thanks for a great video

[@janetkneece8555]

Love to watch you work and make something out of scraps. Nice welds. Much respect.

[@wilfredom.distorjr.3583]

Amazing 👍 Watching Here In Philippines 🇵🇭 Land of The Promise 👍

[@user-ws1yb7dv2q]

Какой красивы сварочный шов,это дорогого стоит. Дай ему маску так вообще можно в космосе варить.👍👍👍👍👍👍👍👍👍👍👍👍

[@SorexSan]

Quiet simple and also efficient this crazy build--if i might say so--but in the same time cheap due using recicled materials combined with new teckh ... awesome !!! Congratulations my friend ! I will keep watch your work until finish. RESPECT & CONSIDERATION !!!

[@rubenlara4437]

Ya. Espera. Este video sludos amigo desde. Tijuana Baja California mexico

[@Valvulin]

Te está quedando bárbaro, espero ver pronto la parte 3.. Admiro a personas con tu capacidad de hacer.. y revivir cosas deshechadas.

[@johnny3700]

Anh là phù thủy luôn rồi chứ thánh chế gì nữa 👍👍👍👍👍👍❤️❤️❤️❤️❤️❤️❤️

[@pablofritsche9839]

Your metalbuildingskills are amazing. This project is a piece of art and you are a genius! Can't wait for the next part.. I like your welding-style with the saftey-hand instead of welding-glasses :D but take care of yourself when doing it and when working with toxins!

[@MetalRestorationBho]

Big Fan Bro Big Fan♥ This is a masterpiece. Congratulation from Vietnam.😉👍🍺

[@Mr_Ho]

Thank you

[@axeloroby7472]

God

[@normal_norm2627]

@@Mr_Ho Sir, you are THE most talented individual I've seen on YT. Do you speak good English?

[@user-gr1th4pt8s]

H 1o

[@Wilson-te6zj]

So this is how I get off the island 🏝️

[@ronaldclark2624]

Very nice! Thanks for sharing! Ron PTL USA

[@cthesavage]

Can’t wait for part 3!

[@shockburn]

Absolutely fantastic fabrication skills, this was very interesting to watch. Those welds are impressive, especially considering you don’t have a helmet and work in small weld using your hand to block the arc. Is this all self taught? Only boat builder error I saw was no sealant on the transom bolts and water cooling intake. I wouldn’t be surprised to see it taken apart again and this step added. Very nice out drive / steering setup, curious how this will perform. Direct drive Nice work buddy.

[@jeffgordon9103]

Is there anyone not absolutely blown away by his skill? I'm thinking he dad at least owns a hardware store, but my lord, what a vision this gentleman has! So impressive!

[@torstenarndt4084]

Yes, me. His work safety is appaling, and there are so many solutions that will work for a short term, but absolutely ruin the parts after a short time of use. I loved the first part and suffered through the second.

[@KaZoria]

Haaa enfin la suite merci beaucoup !! 🔥☝️🙏🙏

[@banhduythinh3331]

Bạn để tôi chờ Past 2 hơi lâu rồi đó.....😀

[@khaduong4387]

Tui cũng vậy chờ hoài

[@JorgePereira-zo6vu]

@@khaduong4387 99

[@faouziazizi1669]

​@khaduong4387

[@ionracer24]

I couldnt wait for part 2!! I wanted to ask why you did not drill a circular hole in the transom for the prop shaft pipe instead of a square hole. Seems like it would be easier to seal? Hope part 3 is soon. i love this build!! Very creative!

[@kathycasazza272]

probably because he didn't have a large drill bit for that and decided shape didn't matter. Easy and fast to cut with his cut off tool

[@ericperry4379]

You did an excellent, smart, hard to do job!I hope you're proud of yourself!You could use this video to land a job doing, ANYTHING! Your work speaks for itself!

[@kiemthanh2477]

Lúc này anh thấy em tiến bộ rất nhiều tiến bộ một cách vượt bậc

[@darylbultitude3786]

Loving the content, really imaginative!! Not convinced by the metal wire around the steering rack, I'm worried for you in case it slips when wet

[@concernedcitizen2868]

dont change, you have a good thing going keep the videos like this... good luck EDIT.... Green screen for the wielding. Check out SHURP he has a green filter for the welding. I like my eyes :)

[@themegamuffin2542]

I know you aren’t trying to say you can get weld flashed through a video…

[@Holy_Maker]

I'm curious to see what the finished ship will look like. I look forward to it.

[@GrafDeGus]

Красавчик, золотые руки)

[@nigelw598]

Gday Mr Ho, Once again a I must say you deserve every Like and Sub that you get! It’s coming along great. I’m really looking forward to seeing the stylish modern lines you produce for your deck and screen structure. It has been very wet down here in Australia too lately. All the very best to you and your family, Cheers 👍👍🍻

[@thedollarboys8600]

This guy is a beast, my respects go out to you for being as creative and smart as you are! Keep doing what your doing man!

[@kiemthanh2477]

Ngưỡng mộ quá chừng luôn em giỏi thật

[@aminesayah8181]

Hello, you have beautiful and wonderful videos, I am waiting for part 3, thank you

[@mmhfs]

Cara, incrível 👏👏👏👏👏 parabéns Você consegue fazer a gente querer saber e acompanhar o seu projeto. Muito bom mesmo,👏👏👏👏👏👏

[@evertonalmeida7039]

Bom 👍

[@BDL090754]

So clever. so inspirational, just love how you can make anything old just work, As Nigel says below, You deserve every sub and like you get. Two points: PLEASE get a welding mask. and build yourself a verandah roof shelter, so there won't be any more weather delays. Great work mate.

[@vietus1040]

Tôi tự chế du thuyền mini từ bãi phế liệu part 2. Video thu vi va huu ich de kham pha. Xem ngay 298 thang 5, 2022 rat thich. Thank you so much va chuc vui

[@unkjason]

I have been looking forward to this video! And was disappointed when it ended. Please make more! From the USA here

[@JudoHubKenya]

been waiting for this my guy.

[@andersonpires479]

Olá muito bom 👍, i from brazil.

[@KebunLangit67]

Hadir sobat Nyimak aja ni semoga sukses ya..👍👍👍👍😊🔔🙏

[@keithwhittaker5238]

This guy is next level.....making something out of nothing !!! Amazing talent !!

[@salierbittencourt7081]

Parabéns, está ficando muito bom !!👏🏻👏🏻🇧🇷

[@randsonsouza4688]

Tô ansioso para ver a parte 3 🇧🇷

[@zarteichhakchhuak1294]

J

[@reynoldzarate1947]

Yes! From the philippines,now i saw the real man that they called "jack of all trade"...very interesting, i really admire keep it up and take care,guys,

[@joshwright9202]

Where most of us only dream this man does.. watching you work is magical. He is 100% the real deal.

[@jeronimoduenez1336]

Finally !!!!!! You are the mAn

[@trevordurham8043]

Hello from Canada, love your build! Can I get your mailing address I'd like to try and send you a welding helmet and some other safety gear if your interested

[@JAQ157]

Amazing workmanship, and has the ability to make his dreams come to fruition. Looking forward to seeing your Yacht in the water and you enjoying. Good Luck my Friend.

[@plemtv7499]

Xin chào các bạn like ❤❤💗❤💗

[@unrealinventor2006]

Get a welding helmet man . Your going to ruin your eyes.

[@tranvanhoanganh1849]

Bửa nào bạn chế cano cải tiến thêm như tàu cánh ngầm chạy lên tốc đồ cao sẽ năng cano lên khỏi mặt nước và cho tốc độ cao hơn khi ít bị cản nước

[@maksimp9015]

Отличная работа,трудолюбие и нестандартные решения делают своё дело👍,но мне интересно ,если потребуется поменять подшипник на ведущем валу со стороны винта , как,ведь он заварен 🤝

[@christinanelson1388]

Eres un ídolo Xxlovezzz.Uno siempre en mi corazón, hermosa, amor, elecciones, culturales.❤ -Son unos de los mejores conciertos QZ1w-

[@crespaodamassaspfc3287]

🇧🇷🇧🇷🇧🇷🇧🇷👍👍