Homemade children's snowmobile with a petrol engine of the grass-cutter. How to make a homemade mini-snowmobile of a children's sled and Weedwacker. How to build a snowmobile. DIY child's snowmobile.
Пікірлер: 102
@jasonveilleux97916 жыл бұрын
Take my money now! Always wanted that as a kid, i would love my boys to have one.
@joejoe2833 жыл бұрын
WOW, 45 thumbs down smh..........They must be haters and very jealous individuals, great job dad!!!
@jtothefx5 жыл бұрын
I’m building something similar. Your setup is very very well thought out.
@officialWWM Жыл бұрын
Wow, that’s cool! Great job. My son found tis video, now guess what he has me doing 😂
@pheenix426 жыл бұрын
You could run a sled tow service at your local hill, getting sleds back to the top.
@nateb45433 жыл бұрын
If my kids were old enough to think of that and charge kids, i would be so damn proud.
@Gamebit4506 жыл бұрын
Would have been epic 2 grow up with a dad like you!
@cicero44bc6 жыл бұрын
This is the best DIY build I've seen on KZbin, brilliant job and great video! If you were to build another is there anything you would do differently?
@yevhenvenhlovskyi83616 жыл бұрын
Thank you. I would leave unchanged the constructive part of the snowmobile and improved safety.
@oneofthosepeople21015 жыл бұрын
Best idea yet. Get these things on the market.
@crazykuup92716 жыл бұрын
My kids would love one!!!!!!
@nolacross7046 жыл бұрын
NEED a 450 on that
@RIBBY_BOY3 жыл бұрын
Lol hell yea
@ianlarimer6 жыл бұрын
Get one of those scrappy free bikes on Craigslist and slap the gearshift on those handlebars, youd get alot more out of it 👍
@ianlarimer6 жыл бұрын
Great thing btw
@starpilot1014 жыл бұрын
Nice idea with the treads
@isellcatlitter7 жыл бұрын
you could use your ice auger motor instead, simply slide the motor off.. drill your holes, and i bet you could even pull a tub with a tent shanty and stuff, while riding it across the ice
@davidkosach30952 жыл бұрын
Your snowmobile parts page has been taken down !! Could you please repost it?? This looks awesome 👍 thanks
@krisjohnson44435 жыл бұрын
Great job Dad!
@garyrush24546 жыл бұрын
Now I’ve Seen It All‼️ 😀👍
@MGszamanVlog6 жыл бұрын
Hi, can I use part of your video to my compilation homemade inventions and projects ?
@yevhenvenhlovskyi83616 жыл бұрын
Hi, I allow the placement of my video on any resource in its original form in authorized ways. I do not allow the use of parts of the video or completely copy video to create new material.
@yevhenvenhlovskyi83616 жыл бұрын
Hi, I allow the placement of my video on any resource in its original form in authorized ways. I do not allow the use of parts of the video or completely copy video to create new material.
@remygudas20403 жыл бұрын
@@yevhenvenhlovskyi8361 when ur not the creatir
@yevhenvenhlovskyi83613 жыл бұрын
@@remygudas2040 explain pls
@remygudas20403 жыл бұрын
@@yevhenvenhlovskyi8361 ur not even the creator of the video and telling him how he can use it
@rstead84776 жыл бұрын
Wow. Impressive. Good job
@PlayingWithFireOutdoors6 жыл бұрын
got a rough list of parts used id like to build one.
@uniquehomemade30736 жыл бұрын
There are references to such details (you need to choose any language and currency): ali.pub/kjxaw - reducer ali.pub/2c0pth - reducer ali.pub/uyxab - chain for gearbox T8F ali.pub/hbyo3 - sprocket 14 teeth ali.pub/gb5tk - sprocket 11 teeth
@davewood71066 жыл бұрын
Frame in 4:15 your frame looks cracked!? Otherwise, excellent job Dad! I don't even have small kids anymore but would love to build one!
@jamfd3s7886 жыл бұрын
Dave Wood it's just an illusion, a strand of plastic that was scraped off the ski is over the metal part in the still picture making it appear as a crack in the frame
@mikethompson59667 жыл бұрын
need a stihl 440 or 660 on that, she'd be flyin
@juliamckenna28517 жыл бұрын
Mike thompson then how many mph will it go?
@mikethompson59667 жыл бұрын
no idea, be quick though
@tannerarant366 жыл бұрын
Haha that thing would be killer
@rudolfsarromaa65975 жыл бұрын
No, No, No, You would need an 880!
@DHxbump6 жыл бұрын
Is there any info about sled model? I have exact same sled, same logo on steering wheel and frame shape identical. Just looking for spare parts, like both side plastic skis. Btw, nice work, just need a bit more powerful engine
@djordanquibael1224 Жыл бұрын
can you tell me what size the chain and sprocket pls
@bestamerica6 жыл бұрын
' wow very good homemade toy snowmobile for kid... how old kid and limit weight on the toy snowmobile
@user-ed3op6sg6g8 жыл бұрын
very well, bravo
@shanelozoya92875 жыл бұрын
So cool, do you remeber about how much you spent building it and would/have you ever posted detailed parts list?
@uniquehomemade30735 жыл бұрын
Thank. I do not remember how much I spent. But the list of parts is available by reference goo.gl/pr7fKP . You can count approximately .
@scottsharer30426 жыл бұрын
WOW! Great job!
@ericlessard50213 жыл бұрын
This thing look 10x robust as my polaris
@sethcarey52707 жыл бұрын
Is there any way I can contact you and possibly purchase the kit from you?
@emattsmith7 жыл бұрын
Very cool, Dad!
@ernestolara93693 жыл бұрын
Can you make me a list of the parts it doesn’t let me get in the one in the description very helpful if you did want to build one
@ghostscalper61596 жыл бұрын
Make it smaller, lighter and electric. I will buy one right away ;)
@uniquehomemade30736 жыл бұрын
I think about it. Perhaps soon I will develop an electric snowmobile. :-)
@javacode4u4 жыл бұрын
@Unique Homemade It looks like you removed teeth from the sprocket. What was the advantage of taking the teeth away?
@yevhenvenhlovskyi83614 жыл бұрын
Yes, I have removed half the teeth of the sprocket. These empty spaces coincide with the mounting bolts in the chain.
@javacode4u4 жыл бұрын
@@yevhenvenhlovskyi8361 Thank you for explaining the reason. I made a similar dual sprocket drive design for a micro dozer and my chain loses alignment easily. I am considering using a single center drive but you have shown that a dual sprocket drive works without losing alignment.
@regismasse15447 жыл бұрын
Where do you get the reduction drive for the trimmer. Is there a part # or lace to order it from?
@Nograc_6 жыл бұрын
Regis Masse it's for a mini bike or pocket bike
@nickc27086 жыл бұрын
Showing the goodies before the patent?
@nateb45433 жыл бұрын
Can the track/motor be raised and lowered? I'm thinking to adapt to snow conditions and to ride down a hill without the motor running
@yevhenvenhlovskyi83613 жыл бұрын
If you raise the caterpillar, the distance between it and the ground will be about 3-4 cm. It seems to me that this is not enough.
@nateb45433 жыл бұрын
@@yevhenvenhlovskyi8361 I'm hoping to eventually build something similar but it will have adjustable suspension, tread depth, brakes, and battery powered. This is a long term project
@yevhenvenhlovskyi83613 жыл бұрын
@@nateb4543 Cool idea! Wish you luck!
@nateb45433 жыл бұрын
@@yevhenvenhlovskyi8361 Thanks. I'm gonna need it, a lot of it
@dmonat6 жыл бұрын
Well done!
@nybergsgarage5 жыл бұрын
Where did you get the brackets in which you mounted the drive shaft bearings from? how much did they cost?
@yevhenvenhlovskyi83615 жыл бұрын
These parts were made to order according to my drawings. I do not remember exactly how much I paid. Here in Ukraine, this work is inexpensive (maybe $ 20 for all turning works).
@nybergsgarage5 жыл бұрын
@@yevhenvenhlovskyi8361 ok. thanks!
@ericfisher85145 жыл бұрын
Where did you get the gear drive shown on 3:16? I'm trying to make one of these but electric!
@martinvargas11034 жыл бұрын
No 40 sprocket chains, I think you can get them on Amazon
@MotoModzofficial2 жыл бұрын
How as could this thing good?
@sethcarey52707 жыл бұрын
Can you list out what all the parts are called?
@martingaudreau76776 жыл бұрын
Call me a snowflake if you must but there are so many ways to loose a digit on this thing! Looks like fun though be carefull!
@ericbourgoin12126 жыл бұрын
loose?
@StevesDIYProjects75 жыл бұрын
250 2 stroke it.
@mascort086 жыл бұрын
Hey where did u get the parts for the motor at?
@Bylga7 жыл бұрын
Ski doo elan prototype ftw
@Dirthead_6 жыл бұрын
Basically a mini sled
@noahmacdonald90957 жыл бұрын
Awesome
@friends5016 жыл бұрын
throw a 110cc on one of those! :D
@GtA-ck4uo3 жыл бұрын
Hi do you have the blue print and where did u Get the parts
@yevhenvenhlovskyi83613 жыл бұрын
Hi. I don't have the blue print. The pats were bought in Aliexpress. There is a link to them under the video.
@GtA-ck4uo3 жыл бұрын
@@yevhenvenhlovskyi8361 ok
@RanGavriely Жыл бұрын
@@yevhenvenhlovskyi8361 The link stopped working :( do you have a list of the parts needed for this ? thanks!
@yevhenvenhlovskyi8361 Жыл бұрын
@@RanGavriely Hi Ran, ohhh, I see . Unfortunately, I don't have an updated list of links. Try to look for the "T8F 11" using the embedded Aliexpress search. I think it help you to start.
@jiggly_puffs54855 жыл бұрын
Put a dirtbike engine on it
@driveitbreakitfixit74967 жыл бұрын
they should make that a kit
@potwengtot6 жыл бұрын
Where did you get the parts?
@yevhenvenhlovskyi83616 жыл бұрын
snowmobile parts - goo.gl/E8qTrK
@tristandoremire86366 жыл бұрын
Put a cam in it
@chrispompano7 жыл бұрын
Wow......are you going to sell kits?????
@uniquehomemade30737 жыл бұрын
I would like to sell the kits, but it is difficult from the point of view of legality, certification, etc. This vehicle for children, and therefore - high demands on security and level of responsibility.
@ericbourgoin12126 жыл бұрын
F=ck the security sell it to kids with a 40 of vodka
@anthonyrybczynski54206 жыл бұрын
Unique Homemade it's safe as can be. It doesn't need a guard over the track it'll be fine.
@ericbourgoin12126 жыл бұрын
Anthony Rybczynski don't worry, even if you make is as safe as can be some idiots will still try to find a way to hurt themselves and sue.
@anthonyrybczynski54206 жыл бұрын
Eric Bourgoin that's true. People are fucked.
@Gjaeralaus8 жыл бұрын
So did you steal this video or do you have the creators approval?
@uniquehomemade30737 жыл бұрын
I made this snowmobile, recorded this video and I am an own the copyright on the video.
@Gjaeralaus7 жыл бұрын
Because I don't want to see people being ripped off when they put a lot of effort into something. Is that wrong?
@Tshizzle42o6 жыл бұрын
Gjaeralaus i want to know why you automatically assumed the vid was stolen?
@patprop746 жыл бұрын
Who give a hoot if he is the first, or the tenth person to build a DIY snowmobile out of a snow GT, it hardly a new idea! we did something like this ten years ago!
@williamtessier59306 жыл бұрын
What a waste of time that's lame
@WhatIThinkNation7 жыл бұрын
Not sure who the owner of the DIY video is but thats somewhat irrelevant. The principle works well but its quite poorly executed for reliability. 1. track is homemade, chains are made of steel (rust will eat this concept alive in no time). 2. track is extremely unsafe for moving parts with aluminum pieces just attached to the chain. 3. Motor has low hour run life, list goes on and on. Bottom line, you are better off getting an older snowmobile, fix up the motor, and putting a speed limiter on the revs for kid play. Ski-doo also makes a smaller (but quite expensive) kid snowmobile for this very application. Safety trumps all other savings, your kid's hospital bill / death will cost more than a safe winter toy when that track breaks apart or a piece goes flying into a by-standing child.
@loooseunit6 жыл бұрын
You could expect 1000hrs plus from one of those Stihl professional line trimmer motors , I'm a contractor use them day in day out , we get 8+ years out of them .