Honda Accord Cold Air Intake Install (2008-12 Accord) /pulls and revs) 8th gen Accord

[@FastlaneHero]

Thank you all for clicking on this video. Don’t forget to subscribe and like the video! 😃😁 Stay tuned for the 8th gen accord build. If anyone has any questions, go ahead and comment. I’ll get back to you as soon as possible! 💯😁

[@samueljosuecandelariomarqu8948]

I have a 2009 6v accord do you think it will work?

[@FastlaneHero]

Not this one. You will have to get one for the v6. I say get the dc sport one. Cold air intake.

[@samueljosuecandelariomarqu8948]

@@FastlaneHero thanks bro

[@joshuaaguilar4905]

What's the link for the part? I'm looking to buy one for my accord too

[@mac11takeya2heaven9]

I’m glad there’s someone new that post vids on 08-12 Honda Accord sedans! Just subbed, keep us updated on ya mods!💪🏽💯

[@FastlaneHero]

Yessir!! Thank you so much! Definitely stay tuned. Working on getting a lip for the car soon and that will definitely be a new vid for the channel! And don’t worry, it’s not gonna be a universal lip. Going to be a actual fitted lip which a lot of people don’t know about. 😁😁😁💯

[@mosesmiller1761]

​@@FastlaneHero good day. Good job. I want to buy one but I want to know how was the fuel efficiency before and how was it after the installation since the past year?

[@FastlaneHero]

It did help with fuel efficiency a little. Maybe 2 mpg or so extra.

[@beatlynx7400]

for the breather tube delete and i found this out the hard way the other day, swapping to the single cooling line on the throttle body will shkrten the distance at a possibility of kinking it on the port coming from the thermostat housing, if you want to do it right buy a foot of line that matches the size and cut it to where itll route nicely with no kinks or snags causing a restriction of cooling to the throttle body

[@NX_TRILXGY]

I DID IT , IT TOOK ME 3 GJALVKLAG HOURS BUT I DID IT , THANK YOU DUDE , your a goat 😩👌

[@FastlaneHero]

Ayyyy! Glade to hear it! Enjoy it dude!

[@oldskolacura9798]

He got an extra 5 HP by adding that. If he could upgrade the heads he could run headers and get about 20 extra HP and that intake would be bringing in double the HP. Imagine sucking air thru a tube much larger but expelling it out thru a straw. It makes no gain but plenty of noise.

[@zeye-_-]

Pretty clean installation👍👍👍👍 the way your glove kept ripping more and more ☠️☠️☠️ it sounds rlllyyyy good when driving

[@FastlaneHero]

LOL thanks so much! Glade you enjoyed! 🙏😁

[@kaspermp.3.495]

This guy should have way more subs honestly a life saver

[@FastlaneHero]

Hahahha yooo thanks!!! Means a lot!

[@thuhinmiah632]

Glad to see you back man, amazing video!!

[@PlasticRocket2]

Cant wait until i can get an intake for my 5 speed accord. That VTEC noise is addicting.

[@FastlaneHero]

Haha your gonna love it! And ur accord is a stick, gonna be hella fun! Popping vtec everywhere!

[@marcelogarciajr7672]

did you say "tooken off?" you're a genius!

[@alberthernandez5886]

Good video. Some other guy didn't know what to do with the rest of the intake tubing and made it into a short ram hot air intake lol

[@FastlaneHero]

Oh lol! 😂

[@AZay25]

Welcome back! 🙌🏼

[@FastlaneHero]

Yessir!

[@ainaaipa5810]

New 2012 Owner - this will be my first upgrade

[@FastlaneHero]

Ayy congrats! You’ll absolutely love it!!!

[@cal8391]

i love this, intake is one of the must-dos

[@FastlaneHero]

Facts

[@Chasingbenji37]

Nice video I have a 4 cyl 2009 accord ex and so far only have an intake as well. I’m trying to figure out how to make this 4 cyl as fast as possible lol from what I’ve read so far adding new header which is like 160$ would give it about +10 more horsepower

[@FastlaneHero]

Ya, I’m guessing that’s the rbc one. I heard of your going that route your need to change the vtc actuator as well. Which is a good thing cause that goes bad on the k24z2 and z3.

[@ainaaipa5810]

Recently bought a 2012 Honda Accord LE (82XXX) miles! This will be a sweet add! Thanks Brah 🤙🏽

[@FastlaneHero]

Hahha nicee! Will love it!

[@jwhatthefrank]

Ight now I'm doing it to my 2012, Thank you for giving me the confidence

[@FastlaneHero]

Hahah, you’ll love it.

[@papiistheone3614]

What kind of intake

[@nijum56]

Forgot your yt name just got it from a friend dang you got a car now ngl car is clean keep it up

[@FastlaneHero]

Thank you‼️ Definitely will‼️ Got lots planned for it‼️

[@nijum56]

@@FastlaneHero how much hp your car making rn

[@FastlaneHero]

@@nijum56 honestly, not that much. Maybe 180 only.

[@nijum56]

Make them vids and make the car faster also Ramadan Mubarak

[@FastlaneHero]

@@nijum56 yessir!!! Ramadan Mubarak!

[@IllIlIlIlIIIllll]

Can’t wait to get one I have 09 accord v6

[@FastlaneHero]

You will love it, have one on my j35 and it screams. Makes cool whistle noises too.

[@NTG223]

I felt the “oh my back” 😂 doing this soon

[@FastlaneHero]

😂😂😂😂

[@raffeuddin5]

Great video way better then the short ram intake

[@FastlaneHero]

Helll yaaa‼️ Thanks cuzzz‼️💯

[@money1093]

Great video man!

[@FastlaneHero]

Thanks man!

[@user-tx5dy5yo5y]

I just bought one for my accord this video helps hella bro 💯

[@FastlaneHero]

Haha, glade it did! And welcome the accord familllyyy famoooo!

[@bradhemmerle7700]

What do you do with the other two hoses that had the coolant coming out of them??

[@oldskolacura9798]

Reroute them.

[@uttasyda9746]

Tbh I have an 08 k24 and if u spend a little more on k+n short ram kit,u get just as much if not more as longer ram air boost and also u life somewhere w/snow and roadsalt,u can really fuck up ur engine or if u live somewhere it rains a lot!lol Just sayin man,good install tho! The k+n has a divider that keeps hot air out so its a separate unit once u close the hood!👍

[@FastlaneHero]

Ya I was thinking of getting it but was too expensive for me honestly. But maybe in the future since winter isn’t too far from now. Don’t want to hydrolock my motorz

[@marcoa.sanchez9297]

Can you provide the link to this specific k+n short ram kit?

[@matthewreynolds2778]

Thank you bro for this video very helpful🤜🤛

[@FastlaneHero]

You’re welcome

[@Strack007]

Totally getting an intake for my accord!

[@FastlaneHero]

Heckkk yaaa!!

[@pokiemua]

Damn I like the sound of that

[@FastlaneHero]

Ayyyy thanks!!!!

[@SuperMan-uh1kz]

Keep going I was going to do my Accord but it got crashed might start something for the k24 2014 crosstour that's basically the same plat form

[@FastlaneHero]

Oh dang, I was looking into getting a cross tour at one point, but ended up getting my accord.

[@najmahussain3664]

Great video!

[@Jhall-ql6bs]

Have an 09 v6 ready to hear it roar

[@BoBBklipZ]

Bro you look cold 🥶 af😂😂😂 thanks for the vid

[@FastlaneHero]

😂😂😂 I gotchu bro

[@maximusgaming7950]

I'm gonna definitely be getting this mod for my 08

[@FastlaneHero]

Worth every penny!

[@official_crisjefe4d4ChapoG]

And I have to ask That flat tire you got next to the temperature, right The orange or yellow thing

[@johnrosario6841]

So the cold air intake doesnt make the check engine light go off?

[@xd-_-trashyonps4821]

how much hp would this mod increase? and does anything else need replaced if i put an intake on

[@theniceneighbor]

Sounds like from your start that you dont have a throttle response controller or tune. The DBW system is hindering your acceleration.

[@ayanbdllh]

Yessir

[@FastlaneHero]

Yessirrr!

[@revengejonathan]

Definitely gonna do this to my accord

[@FastlaneHero]

Worth every penny!

[@Freddy-bx6sf]

Ay great video, but PLEASE invest in some sturdier gloves 😂 it got gradually worse as the video went on lmao

[@FastlaneHero]

😂😂😂 literally have too! Na that so funny, throughout the video it js kept getting worse. 😂😂

[@hakimdurand8427]

Nice vid my dude. Bout to buy 1 of these myself (The Coupe (AT) though) wanted to know. Did a engine light ever come on and did u ever get a tune?

[@FastlaneHero]

Haha it’s a fun car! I never got a check engine for the intake but did get it for something else. And I never got the car tuned .

[@habibi9699]

So can I not just use the newer gen intakes? Much shorter and convenient since it still looks like so much space where the stock filter is

[@FastlaneHero]

Which newer gen are you talking about? If you’re talking about the 9th gen accord, it won’t work

[@marcelsmith6128]

I been wanting to put a cold intake but I’m worry the it could make the engine light turn on

[@FastlaneHero]

Go for it! Surprise I didn’t get a single light for the intake. I got a check engine for something else but never for the intake! Best thing I ever bought for my car! Induction noises are insane!

[@marcelsmith6128]

@@FastlaneHero cool thanks ,another question do you kno how much hp did that give?

[@FastlaneHero]

It gave about 2-6 hp. Realistically speaking. It gave way more throttle response. When punching the car, it drops gears much more faster! Unless if you tune the car, you’ll be making more power out of it. More like 10-15. Maybe more.

[@TheLexusIS250Dude]

awesome video thank you for sharing

[@FastlaneHero]

Welcome bro! Glade you enjoyed!

[@TheLexusIS250Dude]

@@FastlaneHero no problem I dunno if you heard I sold my 2014 IS250 and now I have a 2019 ES350 I have videos of it on my channel feel free to check them out and let me know what you think

[@FastlaneHero]

@@TheLexusIS250Dude ya for sure. I did see a vid on it on your channel.

[@shxfxt]

That shit going hard.

[@fierropaa]

Where you get the kit at?

[@samwhiting1369]

Why get rid of the original air box when you can just take the top of and use the isolated airbox that has direct airflow?

[@FastlaneHero]

I personally wanted to hear the induction more. Either ways the cold air was getting better flow then the stock restricted set up.

[@Lothlanx]

Is it better than the K&N?

[@Aaron_M22]

What happens when it rains, is the filter anti-water?

[@FastlaneHero]

It is not anti water proof, you Actully have to be very careful driving in the rain. My car had a fender liner so that helped keep water way from there.

[@sim021ful]

is this a weird spot to have an intake, like what if theres a flood not too high tho is it close to the floor?

[@FastlaneHero]

It really isn’t too low, but if there is a flood I would not drive it because it will definitely suck I’m water. You could turn it into a short ram by the taking the bottom part off.

[@meaculpamishegas1121]

How did you install the mass air flow sensor? I have the same car and the MAF sensor doesn’t fit

[@FastlaneHero]

That’s weird, make sure your tube is right way. Worked perfect for me.

[@darkmode0104]

Is it safe? Filter itself is located so low. Can it suck the water into the engine with normal daily use in a heavy raining day?

[@Hman.0]

very possible to mess up the filter, yes

[@steezyrony]

I cannot express how fucking amazing this video is bro you explained it so well bro for my slow ass 😂I watch your video 5 time to remember what to do 😮‍💨😂good stuff dawg 🫡

[@FastlaneHero]

Ayyyy that’s what I’m here for!

[@FastlaneHero]

💯💯💯

[@mr.blueman9468]

This was cool

[@FastlaneHero]

Ayyy thanks!!!

[@etobin2003]

Hey do you get a check engine light after installing

[@FastlaneHero]

No I didn’t get any check engine for the intake system.

[@lfc.madeit]

Yo did it make the check engine light come on???

[@FastlaneHero]

No check engine from the intake

[@fabianfitness3627]

Did you get cel

[@nezko3420]

im thinking bout doing this but someone told me ill slow it down, should i do this on my 2011 accord ?

[@FastlaneHero]

I honestly say go for it, the sounds it made literally made me smile everytime! Mad the car feel a lil more happier, getting more air.

[@meaculpamishegas1121]

You could have just installed the one tube and made it a short ram air intake, but the longer tube increases performance at lower speeds

[@FastlaneHero]

Yep, exactly y I put on the bottom part.

[@JosePerez-il3ht]

So it makes it slower if it’s longer or does it make it faster?

[@Hman.0]

@@JosePerez-il3htfrom my understanding it will take longer for the air to get to the engine with the longer tube, meaning you’ll need a decent amount of speed to get a decent amount of airflow, meaning the longer tube will be more effective at higher speeds than lower speeds.

[@nationalsocialism3504]

​@JosePerez-il3ht ummm... the longer is better since the air is being pulled from out side the engine compartment making it cooler than the air from inside the engine compartment. Both are going to work better at higher speeds than lower since the faster you go the more air will be being "pushed" into the system thereby making it denser

[@JosePerez-il3ht]

@@nationalsocialism3504 oooh ok thank you bro

[@sammy.rosario2460]

Where did you order the intake from

[@FastlaneHero]

I got the intake from Amazon. If you go down in my description of the video. I put the link for the intake. It goes for 90 bucks which is the same price as eBay. So I ended up going with Amazon.

[@prod.jaefuego2670]

Hey man I’m really hoping you respond fast but what did you do with the coolant lines ?

[@FastlaneHero]

Haha of course ima respond fast, basically I took of that metal piece that had one for coolant and the other I believe for a vacuum. Once you pull of the coolant part of the metal piece, you plug that straight into the other end in the throttle body.

[@prod.jaefuego2670]

@@FastlaneHero is there anyway I can contact you off of KZbin ? So i can get further help?we’ve been at this for a while

[@FastlaneHero]

Ya of course, my Instagram. Fastlane_k24

[@youthamongus]

Gon do this to my 10 exl

[@olaitanadesoji3719]

This is nice 🎉

[@JosueVazquez-sw3qy]

Puedes poner el link de la pieza?

[@silentnight8667]

is there a specific name to that cold air intake that you Installed? And also what dose "pulls"mean

[@Hman.0]

A “pull” is just slang for driving at full throttle / high power for a set amount of time.

[@official_crisjefe4d4ChapoG]

Wait, I’m new here hello everyone I saw you said you guys will hear the vtc and I wonder if that bad or does it do that when repairing something

[@FastlaneHero]

Vtc actuator is bad, it makes a grinding noise on start up. Indicating that the vtec sprocket is going bad.

[@boredjor3329]

nice. what brand is it?

[@FastlaneHero]

Honestly don’t know what brand, it’s a eBay one.

[@streeks277]

The front bumper has given me so much issues with my accord

[@clarencejules8795]

Where did u order ur cold air intake?

[@FastlaneHero]

It was on eBay. Look up the car year and make, then cold air intake.

[@JamesCraigHeath007]

Guess what I’m doing this weekend….. i like that aloot

[@FastlaneHero]

Trust me. Your not gonna regret it! Just get a good hydro shield so it’ll protect the filter from water just to be on the safe side!

[@JamesCraigHeath007]

@@FastlaneHero will do! Says not in stock on amazon, any suggestions where I would be able to snag one??

[@FastlaneHero]

I have another link for it. It’s one from eBay. Under the Amazon link. 😁

[@cooperdubolino6779]

is the intake you used the amazon link?

[@FastlaneHero]

The one I got was taken down for some reason, but I put two links and they are both the same. Just the coupler is different colors.

[@meaculpamishegas]

Take out the more plain aluminum pipe and it can be short ram too

[@FastlaneHero]

Yep, ran it like that during winter for a lil.

[@everzainperez5157]

would it work for the 3.5 v6 one

[@FastlaneHero]

No it wouldn’t

[@GerberFlerber]

hey man just bought one of these with the 5 speed manual and im looking for a intake any issues with water getting in the intake with it sitting so low

[@FastlaneHero]

So far I’m good, I’ve drivers through some really bad rain storms lately but the car is fine still. The intake is changeable. So I can run the short ram or cold air by taking of the lower part of the intake tube.

[@Brobecreative35]

Did that check engine light come off?

[@FastlaneHero]

Wellll, it comes and go. It’s for my catalytic converter.

[@iron-gamerstv]

Let me ask, the metal hose that you undid with the three hoses(3 in one metal hose) ; you plugged in the valve breather hose to the air intake but what did you do with the other two holes? Did you just leave them un plugged? After I uplug the hose here: kzbin.info/www/bejne/pH6Qf5RnhNyNldE I'm at a loss as what to do with the 2 unplugged holes. lol.

[@FastlaneHero]

I’m sorry, I just saw your comment. Basically what I did is I took of the metal hose part and put the hose straight into the throttle body. And another hose goes from the intake tube to the crank case.

[@tylertirado8675]

Phillips screwdriver my boy 😂

[@zleepyjan]

What muffler you have?

[@FastlaneHero]

It’s all stock, all noise are coming straight from the intake

[@giodelossantos409]

Did you cut out a piece of the inside plastic where the intake hangs?

[@FastlaneHero]

Nope, I didn’t need to cut anything. It basically was a perfect fit.

[@giodelossantos409]

I got a similar intake, and I cut out a piece of the fender liner

[@FastlaneHero]

Oh really, ya I didn’t need to cut anything.

[@kjcustomsauto]

Did any lights come on after running that intake?

[@FastlaneHero]

Nope, hopefully it stays like that!

[@marcoa.sanchez9297]

@@FastlaneHero did it?

[@someguy768]

I installed this on my Honda accord 2012 and now my car is overheating and got leak around the coolant reservoir

[@FastlaneHero]

Sorry to hear that, but I’ve had my intake in my accord for like 2 years and I had no issues what so ever with it.

[@someguy768]

@@FastlaneHero was coolant issue lool i fixed it rookie fix

[@FastlaneHero]

That’s awesome to hear

[@emanndaman8315]

Did your mpg increase?

[@FastlaneHero]

It did but not too much, maybe like 1 or 2 mpg

[@kevingetrich]

Can you use the short ram if you don’t want to use the cold air pipe?

[@FastlaneHero]

Yes, that’s the cool part about this intake system.

[@alberthernandez5886]

No. That would be a hot air intake

[@iamurnamann8662]

Post the link to the CAI so I can buy one. 👍🏽

[@FastlaneHero]

I have another link under the first one link in my description. Check that one out.

[@adrien8695]

Someone help me, I just installed mine on the same exact car but the air filter is like almost touching the wheel

[@FastlaneHero]

That’s weird, I think you put in the tube the wrong way. Try spinning it around, the bottom part of intake.

[@adrien8695]

@@FastlaneHero there ain’t no way else. I took the old air intake box and put the new one in, turn it to the right it hits the wheel, turn it to the left it hits the body of the car, so it’s just in between both of them ain’t no turning it. What I did was I just installed the one with the mass air flow sensor and just left it on top…

[@kclips2518]

How much hp you think this engine is capable of

[@FastlaneHero]

Honestly, I think the k series I have is capable of like 400hp until it needs to be built. Maybe up to 500.

[@kclips2518]

@@FastlaneHero nice I’m trying to get mine in the 3s as a daily driver

[@FastlaneHero]

@@kclips2518 ya that would be a good number. Would be safe for the car too.

[@sushi6266]

will this fit the accord euro?

[@FastlaneHero]

I’m actually not sure. If the maf sensor is the same then it might work.

[@kerikku8998]

is this compatible with a 2012 3.5L

[@FastlaneHero]

I don’t think so, but they do make it for the v6. It’s on eBay, look up Honda Accord 3.5l cold air intake.

[@FastlaneHero]

I believe it’s like 60-100 dollats

[@Danielxperez14]

I have the 2012 accord sedan, I’m looking to get this mod… where can I find it?

[@FastlaneHero]

If you go down in my description, I have a link for it. This one is from Amazon.

[@Danielxperez14]

@@FastlaneHero i have a v6 3.5 so this wont work for mine right?

[@FastlaneHero]

Nope it won’t work, but there is one for the v6 accord. It’s one whole tube. I think it’s like 60-80 bucks. If you type in your car info on eBay, you’ll find it.

[@Danielxperez14]

@@FastlaneHero alright thanks man!

[@FastlaneHero]

@@Danielxperez14 I gotchu! Good luck bro!

[@avsarrr]

Bro, just buy the V6 for real performance gains!

[@FastlaneHero]

Hahahah bro definitely check out my two new videos. I ended up selling my accord and got a j series. Don’t want to say what car until you check it out the new videos, trust me it’s a absolute banger😁😁

[@Aaron_M22]

how much did you spent on that?

[@FastlaneHero]

I believe I spent close to 100 on my one.

[@beyondreality3411]

Can you send me the link so I can get one as well

[@FastlaneHero]

It should be in my bio of the video

[@younga.g8652]

Is your accord a v6 or 4 cylinder?

[@FastlaneHero]

It’s a 4 cylinder.

[@jaredharrell5751]

nice car bro. I have the coupe not the sedan, can i get the same intake?

[@FastlaneHero]

Yessir bro! Long as you have the 4 banger it will fit! 😁

[@jaredharrell5751]

@@FastlaneHero thanks installed it today sounds great

[@FastlaneHero]

Ayyy, that’s awesome bro!

[@jaredharrell5751]

@@FastlaneHero do you recommend k tuner? how much hp do you think it adds with intake muffler and rv6 high flow cat

[@FastlaneHero]

@@jaredharrell5751 I’m guessing you have a v6 accord since you have rv6 parts, I do recommend getting a k tuner to make all the power from your mods, you can be looking up to 20-30 hp but, you will need an actual tune for it. The base maps that come with the tuner would work but they aren’t that good.

[@danteanderson9052]

U should flash the computer to have the vtec kick in earlier

[@FastlaneHero]

Haha, I thought about getting hondata or k tuner, but it’s gonna cost too much. Maybe in the future or I’ll get another Honda that has vtec in intake and exhaust side.

[@definitionXrp]

is your intake carb legal?

[@FastlaneHero]

I’m actually not sure. In my state, no one really cares for carb parts or anything.

[@definitionXrp]

@@FastlaneHero I figured it out all exhaust are carb legal long as you don't modify catalytic converter

[@mlahmagnet936]

Bro, u never floored it! It shifted at 5k rpm lol

[@FastlaneHero]

Lol, I didn’t even realize. I have a review on the intake and did a pov on that video. I went more in depth on that one, more pulls too!

[@m4d894]

What intake is it

[@FastlaneHero]

The link should be down in my description. It’s just a normal eBay intake that’s made to fit this specific accords.

[@AZay25]

Bro your gloves just kept getting worse through the video 😂

[@FastlaneHero]

Lol I literally gave up on it. Just wanted to be done.

[@Mr.Bearns]

I wish someone told him all he had to do was release the wheel well tabs.. 😂

[@FastlaneHero]

Haha, I would have done that but I wanted to show everyone where everything goes.