Honda Accord IGNITION PROBLEMS 98-2012 | REPLACEMENT | "NO KEY PROGRAMING HACK" | DO IT YOURSELF

JOIN GASDIESEL GARAGE AS WE "DON'T GET SCREWED BY THE DEALER" . WE DIAGNOSE WHY THE 98-2012 Honda Accord IGNTION KEY CYLINDER WILL NOT TURN OR UNLOCK THE STEERING WHEEL AND WILL NOT START THE CAR. I SHOW YOU HOW TO REPLACE THE ENTIRE KEY CYLINDER, IMMOBILIZER SWITCH, AND HOW TO BYPASS HAVING TO "PROGRAM THE NEW KEYS TO THE BCM". SAVING YOU HUNDREDS OF DOLLARS AT THE DEALERSHIP. YES A SECRET YOU NOT BE TOLD BY ANYONE IN THE INDUSTRY. ENJOY
******ORDER YOUR Honda Accord IGNITION SWITCH A NEW KEYS HERE..........amzn.to/3B2nHxt
60 BUCKS ON AMAZON
FOLLOW ME ON INSTAGRAM:
/ gasdieselga.... .
FOLLOW ME ON FACEBOOK
/ gasdieselgar.... .
MERCH EMAIL :
[e-mail]
Due to factors beyond the control of GASDIESEL GARAGE, I cannot guarantee against improper use or unauthorized modifications of this information. GASDIESEL GARAGE assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GASDIESEL GARAGE recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GASDIESEL GARAGE, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GASDIESEL GARAGE-SUBSCRIB

[@jamesjordan345]

Thanks a lot...,I'm a mechanic and when I do ignition switches,I hate having to tell my customers that they have to call a locksmith after,this will save them money and make me more because now I can do an complete job..... Your a smart and helpful man... thanks

[@Gasdieselgarage]

Absolutely brother anytime I can help just hit me with a message. It’s why I do these videos. To help people

[@jamesalaquinez3474]

@@Gasdieselgarage i have a 99 accord just replaced the ignition tumbler with new harness and keys, only thing is can't program keys car starts with the new keys but have to disconnect the battery for ignition to fully release keys.. any suggestions sir

[@charlessullivan2623]

Did everything you said for my mom's 2007 Honda Accord and it worked perfectly. Tripped me out that the key transponder thing worked as well. Saved us allot of money brotha, THANK YOU.

[@Gasdieselgarage]

You’re very welcome….it’s why I do these videos.

[@robmarkham3049]

I have to thank you my friend this totally worked on my 05 accord. I lost the key blade but still had the fob with the transponder! I live in the mountains & the closest locksmith was over a 100 miles away & quoted me $870 the cheapest was $650, I followed your instructions & your link for a total cost of $65 & 3 days later had my car up & running!!! You saved me a lot of $$$!!! Just needed you to know I'm beyond grateful & that I appreciate your videos brother!!!

[@Gasdieselgarage]

Awesome my friend I’m glad it helped you

[@eyevansee]

i also have an 05 Accord, did you have to take the transponder out of the key fob and if so, where is it located?

[@robmarkham3049]

@@eyevansee The key Fob is only 2" × 2"! Come on, take a chance-I bet you'll find it my friend!!! :)

[@eyevansee]

@@robmarkham3049 where were you 5days ago!? lol i found it on that day, thanks for the laugh, knowledge and reply!

[@josevalencia4566]

Awesome video. I followed the video exactly and my car now starts like a charm. My steering wheel was locked and my key would not turn, until I replaced the cylinder assembly exactly like the video. This video probably saved me thousands. A shop would have charged me $800 for the part, $300 for labor and another $300 to program the keys. Not to mention the tow bill. You are a genius.

[@maroni1257]

I did this with a used ignition from a junk yard. It didn't work initially. I had to strip all of the electronics off the donor ignition, and replace them with the original, only using the mechanical tumbler/cylinder from the donor and the donor key. I then had to swap the chips from the original key to the donor key to get it to work, but it works fine now. Thanks for the video!

[@TheWiz07]

Just did this today on my 04 accord thanks to your video. I ordered the same ignition unit you linked and it fit. Went and got a chisel set from harbor freight and got to it. The left bolt head for me came off simple enough but the right gave me trouble so i just bent the bracket enough to get it out. As far as the key goes i had to file down the inside notch on the cap that is angled to fit the angle cut on the chip. Once that was done the cap seated all the way flush without glue. Starts and runs great now. For anyone reading this , it can be done and you can save yourself a lot of money if you dont mind having an extra key along with the fob key.

[@marius478]

This is the best and most straight to the point video I found on this. My ‘05 accord just had this problem. I’m going to try this now. Thank you brother!👍👍👍

[@Gasdieselgarage]

Awe thanks bud I greatly appreciate your comments

[@twotoneopossum7240]

My 05 Accord just had this problem too! Did this guide work out for you and what ignition switch did you buy? I'd appreciate any tips you might have

[@lorclutch5582]

My 05 is doing it now

[@danielpledezma8558]

Finally ,someone that go to the pinta. Thanks man

[@longhuynh5249]

I did exactly what you did and my started. Only issue is programming working key to the 2nd key. I used the autel 508 without success. Long and short, i am happy that i got 1 working key and not stuck in the barrel like before. All for $AUD 80. Thanks heaps mate.

[@aeronwolfe7072]

omg, i can't BELIEVE i actually got the old assembly off using a hammer and chisel. things like this NEVER go well for me, but thanks to you sir!!!!!! woot!!!

[@brauliosalazar2108]

Did exactly as show and all worked out great!! Only I had my new ignition unit rekeyed with a local lock smith before installing ($80) and avoid having to cut out chips and carrying extra keys. Totally worth it in my opinion

[@SpawnBuster]

Dude you just saved me a bunch of money. My only problem was that the tamper proof bolts seized completely and I had to cut the bracket off with a dremmel without cutting into the steering column.

[@Gasdieselgarage]

Yep I believe it brother…couldn’t tell you how many times I seen techs at the dealership actually try to cut it off too….yes I worked at a Honda dealership for many years

[@ericsniffle5885]

chisel

[@davidcollazo2102]

@@Gasdieselgarage couldn’t u use tamper proof torx ?

[@Gasdieselgarage]

@@davidcollazo2102 yes sir absolutely

[@TheDIYcarMODS]

I did this on an 08 odyssey and it worked however heres a tip. We had purchased a used ignition off another odyssey which came with its own key. If you are using a used ignition with the key that came with it, it will also have a transponder in that key. When trying to place the keys over each other as in the video, the car would not start. You must first remove the transponder out of the new key you received in order for it to work. The overlapping of the keys worked in this video because the key that was used was new with no existing transponder in it.

[@teddysands96]

Same process followed for honda CRV, however I swapped over the other 2 black parts aswell (not sure if necessary) all working now just need to mount it back on the steering column, the hardest part was the anti tamper bolts, persevered and just as I was about to give up it came loose, cheers for your help mate

[@Gasdieselgarage]

Awesome my friend I’m glad it worked out for you.

[@markcalaranan3975]

What 2 black parts? Mine just broke i have 03 crv and im trying to buy used ignition switch with key in the fb market

[@deltonsmith3528]

This is so nice of you to show us these tricks now my wife car drives fine I appreciate you bud

[@Gasdieselgarage]

Absolutely my friend…it’s why I do these videos. Too many years I watch my customers get screwed heavily at the dealership.

[@bradbozarth4635]

How dare you have that distraction of a delicious looking giant snickers bar on the floor

[@cesarpa6330]

Very,very,good teaching, you've saved me a bunch of bucks, well explained,made it simple,,thanks again.

[@Cl9Daddy]

I swapped ecus in my acura to make it compatible for hondata. My autel wouldn’t support the relearn and vin writing process. But given this info I just need to go back to the yard and grab the key cylinder and immobilizer from the donor car to match the new ecu. So much love and appreciation for you for posting this. God bless you brother!

[@baltimorebigman5999]

Just happened to my 04 Odyssey I’m scared to fool with it. I had no choice but to take it to the shop find out in the morning what he’s going to overcharge me.😂 Awesome video Thanks.

[@elvisfreeland8081]

So what happend

[@user-cd3oi1jv2s]

Excellent video!! Thank you so much. I have no experience working on cars or with tools and I was able to replace the ignition on my 2005 Honda Accord. I ordered the replacement from the link in the description for about 60 bucks!! Thank you again super helpful video man 👍

[@Gasdieselgarage]

Absolutely my friend it’s why I do these videos 😃

[@asmrgodzzz7549]

@@Gasdieselgaragehey man. Great informative video. Kinda got myself in a pickle. I have a 2007 Honda accord that was having the buzzing issue trying to start it so I looked on KZbin and figured it was the ignition switch. I replaced it and now my cranking issue is solved but the car won’t start. Not sure what to do

[@Gasdieselgarage]

@@asmrgodzzz7549 do know if the engine is getting fuel?…..easiest way to figure that out is to spray carburetor into the intake and crank the engine ..if it runs for few seconds then you know it’s a fuel delivery issue

[@asmrgodzzz7549]

@@Gasdieselgarage I just cranked it up with starting fluid and it started and ran for a minute and I shut it off now and tried to restart it and it won’t start again

[@Gasdieselgarage]

@@asmrgodzzz7549 you most likely have a bad fuel pump or clogged fuel filter…I’d start with that my friend

[@kabulgreen8260]

Thanks for your video I did my honda accord 04 the same you did it now it is working thank you again it is very help full I appreciate you

[@Gasdieselgarage]

Too cool my friend…congrats…it’s why I do these videos.👍

[@ponchoh.sanchez137]

I am putting the change of switch into practice here in Mexico City 🎉🤩😍💯💯👍

[@RafaelA-ov8zu]

Thank you very much. I did my honda Civic , excellent explanation. You really save a lot of $$ .

[@masonboettcher2800]

Hey which year do you have and also which part did you get? Trying to fix this asap please let me know thanks!

[@RafaelA-ov8zu]

@@masonboettcher2800 2011

[@RafaelA-ov8zu]

@masonboettcher2800 My honda civic is a 2011, I got the kit that included the doors locks on Amazon, bc one door doesn't work .👍

[@rubenru1985]

Man thanks for that video it helped me so Michel and got the part replaced. That chip thing does work.

[@carmenlong7947]

I watched a guy cut the immobilizer out by using a blade along the seem and then later glueing it back together. He made it look easy.

[@cosmasokwoyo7169]

Amazing technique. You have saved me some cash. Thank you

[@Gasdieselgarage]

That’s awesome my friend it’s why I do these videos

[@fetusdalandlord8752]

Wish I saw this before I put everything together 😭. KZbin should be putting this towards the top of the search list of key reprogramming and ignition switch changes

[@armandopinon2827]

Thank you so much. You did help me. I am grateful to you. I hope you and your family have a happy life. Thank you so much Bro!!!

[@ponchoh.sanchez137]

and blessings to the whole family a big virtual hug for everyone 💯😍🤩🎉🎉🎉🎉👍👍👍

[@gregbellemy7436]

Ty so much for this video, I’m confident I can tackle this myself

[@rolandoclarke9866]

Just did this and it worked but then realized that I need to carry 2 keys now. One for the ignition and another(the original key) for the doors. So don't throw away the original keys.

[@josecamacho2429]

Thx for the tip brother i pay 300 for programming and made a key 3 years ago with a odyssey now have same problem with a acura tsx,also a friend told me if you put the old key stick under the switch works with new one w/o remove transponder but i prefer to do the whole way thx again

[@Gasdieselgarage]

Yes your friend is right

[@Lonewolf-nq2uy]

Damn!! You are the man!!! From all the videos on KZbin, yours is the best!!!🎉🎉

[@qrs3658]

thanks for this upload. i guess i really gonna have to go to the dealer because i lost the original key

[@Gasdieselgarage]

Yes unfortunately my friend

[@patuot5016]

Thank you for the video, I did exactly the same and have the job done perfectly.

[@ponchoh.sanchez137]

Hello my dear friend and you are great my compadre and blessings and I thank you very much for the explanation and God bless you I always send you a big virtual hug for everyone and take care of yourselves everyone

[@MatsuYoda]

Thanks brotha just got gifted one of these at work. Needs a few other things but runs mint!

[@hookabunny5030]

Its raining here to today as i watch this video

[@jimmymcgee4687]

Man that was smart thinking, excellent job

[@maurosandoval1130]

Hello. Try how the video explains it but it doesn't work, is there any other way.

[@Gasdieselgarage]

Doesn’t the starter engage when you turn the key?

[@rwcraver]

Another trick is to duct tape the old key to the lower steering column cover below the immobilizer unit. Over 50% of the time the immobilizer will still recognize it.

[@Gasdieselgarage]

That’s right

[@ronald0446]

Wow thanks so much for the programming yourself tip it really works 👍🙏😇✝️

[@johnsonlong1272]

I saw this video and thought there was hope thanks for making the video but in my case the old owner lost the key and they have been unable to find it so without the old key I don't have a chip either 2004 Honda Accord sounds like I'm going to have to bend over for the dealership after all. The car is in fairly decent shape a couple hundred dollars worth of work should get it through inspection plus a set of four tires it appears the most expensive part of this whole car will be the key which will probably still be less than two car payments of a new car.

[@Gasdieselgarage]

Well if I can help in any way just message me or email [e-mail]

[@devn2190]

thank you brother!

[@noe11eism]

I assumed it was possible and you just proved me right.

[@jeffbenoit5393]

I got screwed by the dealer and now the windows and door unlock but won’t start took battery out and tried the key in different modes of lock and unlock but still won’t start it worked from the dealer for about a month but now won’t start not the battery it a new legend one cleaned terminals still in a theft mode and the green light acts up and when I put key in it stays on for a bit longer than it’s supposed to

[@Gasdieselgarage]

No it’s not bud….Does that car engine crank when you turn the key?…..not start….just cranking?

[@alejandrogallardo649]

Thanks man you save my life I’ll send you greetings from sacramento ca

[@Gasdieselgarage]

I use to have family in YUBA city near Sacramento…very cool my friend

[@seanvillanueva7158]

Gonna order my part now, wish me luck!!

[@Gasdieselgarage]

Absolutely my friend

[@1lowaccord176]

I’m having hard time getting security screws out. My Dremel crapped out on me in the middle of cutting a slit. I don’t have the patience to hit it with a screw driver and hammer. My steering wheel locked to so hope it goes to get in way of taking off screw behind steering wheel.

[@seshachary5580]

very nice and educative. Thank you regards

[@georgewashingtoniv8745]

I mean I have a problem. My key fob on my '04 Accord is pretty ate up at the top, but I highly doubt the transponder fell out on it's own from general wear and tear. I think on mine it's located kind of top right in-between 2 buttons, but I can't tell if it's my tumblers that is the problem, the fact that I have to super glue now the physical key to the fob itself and it's just not turning correctly while in the ignition or the highly doubtful transponder itself that is malfunctioning somehow. I have to go to work in the morning. I can't really do anything at 11 pm for the next day. It just won't budge it seems. It is stuck in the zero position when there are 1, 2, and 3 positions. It won't go out of zero now though. I somehow got it to work when I went to work this morning though and when I left work this evening. I wish I knew what it was, I'm a sitting duck with my job on the line. This isn't the type of job with a lot of "mercy" either.

[@tombinks7672]

I will be doing this to my Honda real soon. Ty

[@marius478]

You definitely got another subscriber in me. 👍

[@ericcraighead9158]

How’d you get your steering wheel to unlock??

[@gatos697]

You are a genius man!

[@KenDepew]

What if you have to replace the immobilizer as well?

[@juanmireles4299]

Tanks great video

[@mariomaldonado518]

I am having trouble with my honda civic 2015 ignition key switch, thanks to your tutorial I know I can do it. Q. Any idea where can I buy it. Thanks for your help.

[@Gasdieselgarage]

Is the key not turning freely/ getting stuck?……yes I do know where to buy one ….just trying to narrow down your problem

[@mariomaldonado518]

@@Gasdieselgarage ir does not turn at all.

[@Gofucurself123]

So is the honda accord n odyssey same for honda pilot like well that part fit in to a 05 pilot cuz i keep looking they look like da same

[@Gasdieselgarage]

I really can’t be for certain that will work…sorry

[@HighWithTy420]

So my issue before I start trying to complete this job is that the steering wheel is locked up so I’m stuck at what do do about that one screw that you have to turn the wheel to get to but I can’t turn my wheel because both the steering wheel and ignition is locked up and to get the steering wheel to unlock you have to put the key in to turn it and I can’t because both are lock so I’m stuck on what to do

[@joesephgrainger1683]

Dude you helped me big time ty 🙏

[@theworldisnotenough5185]

this is really cool. good job and thanks for sharing. good video

[@AdamAdam-vg4ed]

It really help me out it work for thank you so much

[@julianfs35]

I wonder if this trick will work on Honda Accord 03

[@Gasdieselgarage]

Yes it should

[@rscar9195]

GREAT TUTORIAL

[@manuelmunoz1104]

These are awesome videos thanks for the tips

[@Gasdieselgarage]

No problem my friend 💪

[@emilywood6426]

What about if the steering wheel won’t turn and I can’t looses the screws behind it

[@cayrick]

Thanks!

[@Gasdieselgarage]

Absolutely my friend

[@dwighttyler2796]

Dope video GDG

[@jemy1971ify]

I did that on a Honda pilot. I need to do that now on my civic but I had forgotten this trick. So glad you reminded me bro lol

[@tysongonsorowski8574]

Good tutorial and great idea to save money

[@cristianledesma7482]

If I’m right for civics you can just take out the FOB out of the key and move into the new set of keys?….. ok I’m trying to take of the tamper bolts and they’re not as easy as he makes it look to take out

[@Gasdieselgarage]

Yes technically

[@neilmacindoe1931]

Put in new ignition unit with old immobilizer, placed old key next to new key, engine will crank fine but does not start. Is that due to the immobilizer not reading the chip in the old key? Thank you for any advice!

[@lenardblunt8871]

This really works thank you

[@charleletondoll2118]

Just tried this on my 07 Honda Accord. It did not work switch the chip from the key fob which is the original one that goes to the mobilizer into new key which happens to be different than yours push button keys still will not respond or start

[@oyfum7318]

I’m not able to find the chip and I don’t know if I damage it trying to find it

[@Gasdieselgarage]

The key you took apart…is it the original key by Honda?

[@fpvraver]

Could you do the same thing with just replacing the cylinder? I guess it's called. It has the cylinder with the wafers, and it all slides in to the locking piece. With like a dove tail on it. Could you just replace that if it came with a new key and you switched the transponders?

[@Gasdieselgarage]

To answer your question YES but it may need to be programmed if the key is new. If it’s just the mechanical tumbler (cylinder) you’re replacing you should have no problems

[@HighRidgeHandyman]

I took my key apart and I didn’t find a black chip but inside the actual key was a little rubber holder and there was a glass little tiny tube in there is that the chip? Coming out of a 2005 civic key? I did switch the transponder over like you did to the new ignition and I held the key up but I still get a flashing green light. Any advice on that one?

[@brittanyjeffrandolph7497]

What do you have to do if you totally lost the old key and i bought a new key and ignition switch but dont have the old key to take the transmitter out of so what steps do i take now?

[@robertkaranja6056]

Having the same problem with my honda fit jazz 2010..have swapped the immobilisers already, the old key and the new are in the same key holder since i cant tear up my new key like you, i think am afraid of messing it as i only got one key but the light still on... what do I do

[@Gasdieselgarage]

Unfortunately you may have to take it to the dealership to have it programmed…you already did the expensive part by replacing the immobilizer.

[@Not_your_Dad117]

What do if my steering column locks up???

[@Gasdieselgarage]

Does it lock up while driving or sitting still? Check your power steering fluid level 1st

[@bryankrispens227]

Great work GDG

[@anahicervantes8235]

Great job man my housband he fix he is car thanks for you video thank you thank you thank you

[@Gasdieselgarage]

Awesome ty for the kind words

[@abdulkadershariff1720]

I changed the ignition lock and now the immobilizer cant recognize its key. any solution please??

[@angeldelgado7189]

Un honda accord 2006, v6 , se puede hacer eso? Gracias amigo

[@Gasdieselgarage]

De nata ….hopefully I spelled that right 😬

[@cxnnon]

What can I use to take off the non tamper 2 screws that’s on top ??

[@noe11eism]

This is fantastic!!

[@loganmarcus6516]

What about the door lock, do I just have to keep my old key? How will I move the steering wheel if it’s locked?

[@MyLifeThai371]

Yep. You need to keep your old key. My Honda actually has 4 different keys on the key chain, since every lock on the car uses a different key. Honda's are notorious for the tumblers in the door locks going bad. It feels like I drive a Frankenstein car.

[@richerdoucet2679]

Is the computer also programmed with the chip? Or only on the barrel module?

[@Bieggaoaivi]

It worked, thank you so much.

[@ronaldkapeller584]

How can I get the part with the right mobilizer on it? The person that tried to steal my car busted the screw or the mobilizer attaches. So don't think I can swap my old one on to the new unit.

[@Gasdieselgarage]

No unfortunately if you need a completely new immobilizer it will have to be programmed by the dealer or a locksmith because the new will have to be programmed along with the new immobilizer. I feel for you I do ☹️

[@Tacotorrojo]

will this replacement part work with a 99 honda accord?

[@Gasdieselgarage]

Yes it should

[@Princess_Arly]

I love this channel

[@jameseaton6429]

Will this work on a 2012 Honda Civic?

[@Gasdieselgarage]

Yes if it’s the same set up as seen in the video

[@68mediagroup34]

Can I use flathead screwdriver to chisel out the tabs

[@Gasdieselgarage]

Yes absolutely

[@RichyN25]

this just happened to my 2004 Accord, I hate new cars and their stupid chip keys, guess I'll be ordering the new ignition cylinder

[@Gasdieselgarage]

Bummer man….yes the new cars suck for career mechanics like myself….now Adays it seems like mechanics need an IT degree on top of mechanic skills with all the new computer crap

[@RichyN25]

@@Gasdieselgarage I'm an IT guy myself and I much prefer the older vehicles, there is almost no reason for a car to be computer controlled, especially seeing all these new cars with electric E-brakes, I thought the whole idea of an emergency brake was that it was supposed to be usable even in an emergency, if you lose power, the button doesn't work, thus the E-brake doesn't work... so stupid. Love my old Chevy trucks though, much easier to work on but the local scrap yards parts are much harder to find now than 5 years ago

[@Gasdieselgarage]

@@RichyN25 a man after my own heart I’m a Chevy guy too. I couldn’t stand that electric e brake on the Dodge Ram I had….the truck wouldn’t start one day and had no way of releasing the brake to get it towed. I had to research it and there’s a secret panel that has to be removed and put a lanyard cable hanging out of the dashboard.

[@RichyN25]

@@Gasdieselgarage gonna be tearing apart my 04 honda Accord steering column today after work, luckily found a local locksmith who said he'd program the new keys for me for $95, otherwise I was gonna do the chip transplant method myself haha

[@salvadoralvarez2093]

Gracias from Guatemala 💸💸💸

[@Gasdieselgarage]

You’re very welcome my friend

[@jimklovestheway6653]

I took my 2006 civic to the dealer...they call 8 hours later...needs a new starter.... Can you guarantee i asled... they said no but that's where we have to start

[@knock904]

Great tip bro 👍🏿

[@louissolano8949]

Sir what if the key that I have now (original) is NOT being recognized by the system then what? My key does turn with no problems but the car is NOT recognizing the key. I've checked everything else in the vehicle I mean EVERYTHING, the green key symbol keeps flashing I'm assuming to let me know it's an issue with the ignition system. I have a new starter, a new alternator and a new battery I also have recently installed a new fuel pump assembly. Before the car stopped working it would turn on but it took sometimes a dozen or more key turns before the car would actually turn on. If possible could please give me some ideas of what could be wrong. I'm at my wits end

[@Gasdieselgarage]

Yes absolutely I’m sorry you’re going through that headache. #1- does the original key have a chip in it?…#2- is the original key a Honda key “meaning does it have the logo on the key?..#3- if the answer to both questions are yes. Try holding the original key up to the ignition near the illuminated green circle while turning the new key….if this doesn’t work you most likely have a bad VATS ring that doesn’t recognize the key….Email me I can show you what that part is…..”GasdieselGarage.com”

[@pouncerminned863]

check the fuse, it will say something like ACL or something under the hood

[@ronald0446]

Ps! Since i could not get the bracket off that holds old assembly inplace bcoz of the theft proof bolts i just left it and hooked both wiring harnesses to new one and for temporarily i tied ip new assembly so not harm wiring. I put old immobilizer put on new assembly and old key chip put in new one it started but shut off as soon as it started also like i said earlier in my comment steering wheel stayed locked so what did i do wrong? Its a 2009 honda civic dx thanks Godbless 😇✝️🙏