Honda Accord LED Interior How To Install - 8th Generation 2008-2012

  Рет қаралды 119,460

PrecisionLED

PrecisionLED

Күн бұрын

Пікірлер: 74
@b.f.378
@b.f.378 5 жыл бұрын
I have a 2011 Accord also (V6) & I just replaced every light in my car with LED & I even put LEDs in my DRLs, reverse lights and trunk light. What a difference it makes, in terms of making my car look and feel more special lol
@musicanoofficial7233
@musicanoofficial7233 5 жыл бұрын
What bulbs did you use for drl's. I bought some but they were crap and they kept flashing.
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Here is a direct link to your drl's for your convenience: www.precisionled.com/premium-9005-cree-led-headlights.html
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Glad to hear, it does make a huge difference!
@f34dave
@f34dave Жыл бұрын
Just what I was looking for! Excellent tutorial.
@sammysaid6496
@sammysaid6496 5 жыл бұрын
Awesome video, got my interior lights and dome lights done in 5-10 minutes. Thanks!
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Glad to hear!
@tatyanacanon3869
@tatyanacanon3869 Жыл бұрын
Great tutorial! Easy to follow! I bought my LED interior lights on Temu ($10). So happy with my new lights on my 2010 Honda Accord LX-S coupe! Def gives it a nice modern look😄
@2014xtep
@2014xtep 2 жыл бұрын
Thanks Phil for posting this video. This certainly helped me with led installation on my 2008 Honda Accord coupe.
@1695Ashu
@1695Ashu 3 жыл бұрын
Thank you for your video. It was so easy to get it done ✅ after watching your videos 😉. Saved some bucks
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Glad it helped
@Viralpete0
@Viralpete0 3 ай бұрын
For the license plate led installation, the little grey brackets that the bulb goes into, is their anyway to order those separately because the bulbs burnt the plastic and it melted together, everything else went on perfect and this video helped a lot💯
@SoonQie
@SoonQie 3 ай бұрын
Good tutorial & i want to believe same steps applies to the 2006 honda accord. I am particular about the door lights because the way u pry it open without having remove the door panel makes it a whole lot easier. Can same be done to the 2006 honda accord?
@zurul629
@zurul629 10 ай бұрын
Thanx for the video , all done apart glove box . There is something looking like a light on the side but I'm not sure how to take it out, don't want to break it..???
@33apd
@33apd 7 жыл бұрын
Way to go!! Excellant Vid Thank You!!!!
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Thank you for tuning in!
@arlenyvaldez6069
@arlenyvaldez6069 3 жыл бұрын
Hey, I’m aware you used the premium package on this video, but I wanted to know if you picked the Crystal white or the cool white color?
@maximusgaming7950
@maximusgaming7950 Жыл бұрын
Thank you so much bro 💖🙂
@bubba8984
@bubba8984 Жыл бұрын
awesome video man. thanks!!!!!
@михаилпанев-о4к
@михаилпанев-о4к 3 жыл бұрын
Brother, you are JUST GREAT! Thank You!
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Thanks for tuning in!
@josemeza4280
@josemeza4280 8 жыл бұрын
Hey I saw that you also offer fog light for the Honda Accord could you do a tutorial ?
@PrecisionLED
@PrecisionLED 8 жыл бұрын
Thank you for the interest. The fog installation is virtually the exact same as the low beams shown in the video. The only difference would be physically accessing your fog bulb.
@bobkat88
@bobkat88 Жыл бұрын
Hello, the trunk, door and glove box LED’s are T10 sockets right?
@vegasbob007
@vegasbob007 11 ай бұрын
What bulb model do you use for the courtesy door lights, trunk light ,and license plate light ?
@jajuangarcia7048
@jajuangarcia7048 10 ай бұрын
T10’s
@davidcrawford8561
@davidcrawford8561 7 ай бұрын
Do I need to install resistors with this?
@Quinten_Ebben
@Quinten_Ebben Жыл бұрын
Hi i order this led light but i want also led blinker at the front of my car. Do you know wich i have to buy? I have a honda accord elegance 2.4d out 2010
@PrecisionLED
@PrecisionLED Жыл бұрын
We do not recommend upgrading your turn signals to LED as they would likely hyper flash when ignited.
@JoshYates78
@JoshYates78 7 жыл бұрын
What's the difference between the standard and premium interior LED lights?
@PrecisionLED
@PrecisionLED 7 жыл бұрын
The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our 1 year warranty.
@cjelectronichunter
@cjelectronichunter 6 жыл бұрын
I watch this video all the time everything is easy to handle except putting the license plate housing back
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Thanks for watching!
@Hbtl_markie
@Hbtl_markie 2 жыл бұрын
Does map & dome take the same light in the 08 accord
@chrislarkin154
@chrislarkin154 4 жыл бұрын
Hi I've an issue with the front done light not coming on when I open the doors on my 2010 accord. Have any of you guys had this issue? Great video buy the way
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Unfortunately we have not experienced this issue, but perhaps one of our viewers has had a similar experience! Good luck!
@nasseranise102
@nasseranise102 2 жыл бұрын
The fronts shouldn’t come on even from the factory. Only that middle one does.
@bbminetesting6837
@bbminetesting6837 2 жыл бұрын
Don't know if you're still having this issue, but I had the exact same issue. In my case, the map lights didn't turn on whether I pushed the button or opened the door. Turns out one of the switches wasn't getting continuity, so I unplugged and replugged the switch, which fixed it for that side. The other side was just a burned out bulb. Hope this helps! EDIT: If the light comes on when you push the button, make sure you have the switch set to "door"
@nasseranise102
@nasseranise102 2 жыл бұрын
So when you finish installing these lights on your Honda it becomes a Nissan?
@Oppshopper
@Oppshopper 4 жыл бұрын
Wait does anyone see the title it says 2008 2012 Honda Accord but at the end of the video after he was done with the license plate light u could see the car is a Nissan Altima
@PrecisionLED
@PrecisionLED 3 жыл бұрын
You caught us! We must have run out of Accord photos! Good find!
@grediharyanto
@grediharyanto 2 жыл бұрын
hi bro, I want to ask, when I replaced the trunk light with LED lights, all the car cabin lights turned off completely? (front map, rear dome, trunk) the lights in that section are all completely off. How can be like that?
@grediharyanto
@grediharyanto 2 жыл бұрын
btw my car is honda accord 8th gen
@bbminetesting6837
@bbminetesting6837 2 жыл бұрын
Sounds like the LED in the trunk had a short. Probably blew the fuse.
@savann-gp2yz
@savann-gp2yz Жыл бұрын
same here smh
@john316burger7
@john316burger7 3 жыл бұрын
the rear dome led is 38mm?
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Hi! In this installation video for the rear dome light we used a 31mm festoon type bulb, which you can find here: precisionled.com/premium-festoon-31mm-canbus-3smd-5730-led.html
@bernymacjean8526
@bernymacjean8526 7 жыл бұрын
can u tell me what is the name of the light? I want the bleu one
@PrecisionLED
@PrecisionLED 3 жыл бұрын
Which light specifically are you interested in? We offer two color temperatures, 6000k crystal white and 8000k cool white. The 8000k gives off a very faint hint of blue.
@axeldel24
@axeldel24 3 жыл бұрын
Where do I get the tools?
@chipajoselito
@chipajoselito 7 жыл бұрын
Do these LED lights dim down when the car doors are opened and closed like they do with the factory bulbs? Didn't seem like they did in the video and it's not clear in the product description in your website. Please clarify.
@PrecisionLED
@PrecisionLED 7 жыл бұрын
Thank you for your interest. Yes, the LEDs would indeed dim, exactly as your halogen bulbs do.
@iramercer5245
@iramercer5245 2 жыл бұрын
my front map lights do not turn on when the door is opened. How do I fix this?
@bbminetesting6837
@bbminetesting6837 2 жыл бұрын
Do you have the switch set to "door"?
@iramercer5245
@iramercer5245 2 жыл бұрын
@@bbminetesting6837 my car does not have that switch
@bbminetesting6837
@bbminetesting6837 2 жыл бұрын
@@iramercer5245 What year and trim level do you have?
@iramercer5245
@iramercer5245 2 жыл бұрын
@@bbminetesting6837 2012 LX
@hassanrana3838
@hassanrana3838 7 жыл бұрын
where can I get the tools sie
@PrecisionLED
@PrecisionLED 7 жыл бұрын
You can find our trim tool set here: www.precisionled.com/trim-tool.html
@Afa895
@Afa895 7 жыл бұрын
i tried putting in led lights while switch on.. it kinda flashed and stopped working even the other side stopped working. do u know what could have happen...?
@PrecisionLED
@PrecisionLED 7 жыл бұрын
Was the LED purchased from PrecisionLED? We have never heard of an issue like this before with our kits. However, if you did not blow a fuse in your vehicle, I would suspect it is likely a defective bulb.
@Essa_H1
@Essa_H1 6 ай бұрын
How the hell did u pull it out so easy
@Ihaveadashcam
@Ihaveadashcam 7 жыл бұрын
How many k were those interior bulbs.
@PrecisionLED
@PrecisionLED 7 жыл бұрын
We do have listed the 6000K color temperature was used for this installation.
@darrylhammond3969
@darrylhammond3969 7 жыл бұрын
You forgot to wear gloves when installing the bulbs.
@PrecisionLED
@PrecisionLED 7 жыл бұрын
When installing HIDs, the oils from you skin can decrease the lifespan of the bulb. However, the oils do not affect LEDs, so it does not matter if you are wearing gloves or no. We would only advise to use a cloth or gloves when removing a hot bulb.
@bernymacjean8526
@bernymacjean8526 7 жыл бұрын
can u give me the name of the , I want to bleu in my 2009 Honda car
@PrecisionLED
@PrecisionLED 7 жыл бұрын
Thank you for your interest. You can find a direct product link in the description of the video. You can select the blue color during checkout.
@hayzar4054
@hayzar4054 7 жыл бұрын
my friend i accidentally break the lamp now i am trouble can you should how to take out lamp
@PrecisionLED
@PrecisionLED 7 жыл бұрын
I would recommend using a piece of tape to wrap around the bulb, and then use the tail end of the tape to pull the bulb out of the socket.
FIXED! Honda Map Reading Lights Not Working
10:08
TightWadDIY
Рет қаралды 212 М.
How Strong is Tin Foil? 💪
00:25
Brianna
Рет қаралды 30 МЛН
Бенчик, пора купаться! 🛁 #бенчик #арти #симбочка
00:34
Симбочка Пимпочка
Рет қаралды 4 МЛН
Episode #180 - 8th Generation Honda Accord USB Audio Interface
9:23
College Hills Honda Accessories
Рет қаралды 138 М.
HOW TO Install HONDA Accord LED Door Sills (EASY)
20:11
KLEANTRIX
Рет қаралды 373 М.
Top 5 Problems Honda Accord Sedan 8th Generation 2008-12
5:32
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 617 М.
How to Install Honda Accord LED 9006 Headlight Bulb 2008-2012 Review
6:33
How to Program Honda Accord Key - SAVE $200 Doing This!
4:14
Laith Hana
Рет қаралды 1,2 МЛН
8th Gen Honda Accord | What Wheels Fit
6:03
Fitment Industries Garage
Рет қаралды 139 М.
Should you choose LED or HID Bulbs? Everything you need to know!
17:10
Headlight Revolution
Рет қаралды 5 МЛН
Verna  Automaze USB EL wire | interior Light
3:07
DVL car world
Рет қаралды 1,8 МЛН
How Strong is Tin Foil? 💪
00:25
Brianna
Рет қаралды 30 МЛН