HONDA ADV 150 Transmission Gearing Upgrade 17T Countershaft gear - REVIEW

[@AldrinAlmonteTv]

any update po sa 17T? :) naka salpak pa din ba sa Adv nyo till now? :)

[@kyondi8480]

Tama lng na mag 17T. Kc wlang dulo ang mga Honda, kylangan lng tlga my palitan or knting tune up para dumulo, sa torqe nag invest tlga c honda.

[@BluBlade-k7b]

I have 22 Air Blade 150 , will the 17 tooth gear work in my unit ? I put in DR, Pulley sliders . Take out the air tube and baffle in front of the air filter for more power , that is a simple thing and you will like it .

[@mikeal-assaddungon2446]

More power lods. Always ko talaga inaabangan vids mo. Pulley mo still stock or kenzo pa rin?

[@VidzMoto]

Yes sir kenzo parin

[@mikeal-assaddungon2446]

@@VidzMoto springs mo? Stock din?

[@VidzMoto]

@@mikeal-assaddungon2446 Hi Sir Gamit ko Center Spring NCY 1000rpm then for the clutch spring stock lang

[@mikeal-assaddungon2446]

@@VidzMoto kamusta top speed lods? Dumudulo na ba?

[@VidzMoto]

@@mikeal-assaddungon2446 hi sir hindi ko pa na try idulo sa city, pero mabilis makuha ang 100kph

[@human3565]

Meaning 17T is better then original transmission?and original one is T????

[@josephanselmo-g4b]

Saan mo nabili Yung counter shaft boss

[@papijhaytv4186]

Sir Vidz san nyo po nabili? And bakit NO for city driving?

[@mjsuanga9703]

Ano po ba stock counter shaft ng adv 150 boss

[@jacobcathyrine9770]

Pop's pahinga naman ng link 17 t or saan ka nag buy

[@DexterBalite]

Yown oh PM lang sa mga gusto pong bumili ng gear 17T meron tayo

[@ORYANALEXANDERPASCUA]

how to order boss? ASAP

[@johnlesterrivera5947]

Ano set ng makina mo sir?

[@renardvincemalunes37]

Paano po kung 18t? Mali kasi na order ko.

[@kyondi8480]

Mas dudulo pa yan idol pag mag bigat ka ng bola. Kng stock 20grams. Gwin mo21 grams straight. Pero stock lng center spring po.

[@renardvincemalunes37]

@@kyondi8480 Noted po, maraming salamat

[@kyondi8480]

@@renardvincemalunes37 nd ko masend ung link idol. D2 ko napanuood ung explatation ung mga flyball para my dulo kht pa mabigat ang motor. Kht mag stock center spring ka ok na un. FLYBALL - Mabigat vs Magaan By: THE BLUE KETCHUP Yn po try mo hanapin at panuorin idol.

[@larrypasumbal]

boss pwd yan s click 125 ?

[@sandylacampuingan]

Bos sa click 125 v2 ano pwede ipalit na gearings

[@rantyroman3288]

Boss anong brand ng 17th gear po ninyo

[@kyondi8480]

Sir anu ung stock flyball ng ADV po?

[@VidzMoto]

stock flyball ng ADV sir is 20 grams

[@rots_adv]

bro, may additional arangkada din ba ito? at kamusta ang long term use neto?

[@VidzMoto]

walang additional arangkada yan since, since nag taas ka ng 1 tooth, may advantage cya sa dulo ng konti.

[@maicon2rodas]

Adv 150 original são quantos dentes?

[@jakedumangeng4137]

Good day sir. Pag nasalpak na ba ung counter shaft sa counter gear ay may play talaga? May issue kasi adv 150 ko lumalagotok kapag nag branrake sa likod. Napalitan ko na transmission bearings 6 pcs pati swing arm bearing, break caliper and pads, rotor disc and bolts pero ganun parin. Thank you. Ganito po mismo issue na nasa video kzbin.info/www/bejne/m5TWdaSQjbJraNEsi=lb9-OE5XUW_imQJr

[@VidzMoto]

Hello sir, yes may play talaga yan sir pero not much. kung lumalagutok sa likod check your rear break assembly, baka hindi naayos pag lagay ng Pad Retention system. Pa check mo sir yan kasi nag hohold sa brake pad para hindi mag vibrate. also dapat may grasa ng konti yung pegs ng brake caliper dapat hindi stuck yan. pag ok naman check mo yung tensioner ng makina baka maluwag na or defective

[@jakedumangeng4137]

Ah okay sir. Try q ulit sa caliper. Hindi cguro tensioner sir kasi sa likod mismo nanggagaling ung tunog. May tanong aq ulit sir. Pag ba naka salpak ung mags sa final gear comp., na wala ung swing arm, may alog din ba ng kunti? Salamat ulit sir ​@VidzMoto Ganito mismo adv150 q. Kaso hindi nagreply uploader kung ano naging result ng alog sa mags kzbin.info/www/bejne/fKSramtpeLOamMksi=0-0otxmfe_Cjqppl

[@VidzMoto]

@@jakedumangeng4137 hindi ko pa na try alugin sa akin sir. pero if meron man sobrang minimal lang dapat since meron guide teeth yung final comp para sa wheel. check mo rin kung naayos ba pag lagay ng spacers sa swing arm.

[@kalvinluaha2496]

Kegunaan ring nya apa bos

[@JuniorFerry-y7q]

Sir nagpalit ako counter gear 17T, binili ko mothaiconcept, bakit nagvivibrate ung handle bar ko pagtakbo ko, 3(16) / 3(18).tenks

[@jayjayjacosalem]

mukhang nagddragging ata clutch mo cguro sir.

[@bantongworks]

Boss tanong lang po same lang to sa pcx 2018 model no??

[@Triple-Amazing]

Same lang po😊

[@MrRGM10]

Sir sn mo nabili side mirror may link ka

[@marwinblanes3491]

Pwede po kay qng 15t ang ilagay sir para magkaarangkada c adv? Meron po kaya 15t na countershaft for adv150?

[@VidzMoto]

kung arangkada sir ang hanap mo, babaan mo ng bola stick with the stock gearing po sir. pag ginawa mo kasing 15T wala kanang dulo po.

[@marwinblanes3491]

@@VidzMoto pro pwde po kaya xa salpakan ng 15t sir? Meron kaya available or pwde po kaya ung pang click?

[@evelynreyes5002]

hm yan boss

[@georgemamaril2439]

Boss pwede po ba ss pcx 160 ko ang 17T ano pong magandang combination text mo ako boss sa # ko..tnx

[@carlomungcal]

Meron link boss?

[@kimberlywexler2208]

pwede DIY boss? plug and play ba yan? TIA

[@VidzMoto]

yes sir plug and play yan sir

[@kyleasuncion422]

Sir, Okay lang po ba mag change ng Pignon comp for ADV (stock) kasi may issue sa threading. Mag change ba ung sensor nya sa speedometer or hindi? thank you!

[@VidzMoto]

Hi sir, wag mo lang palitan ang final drive na gear, kasi mababago ang reading ng speedometer.

[@kyleasuncion422]

@@VidzMoto may issue kasi sa thread ko, kasi ung nut ayaw na pumasok. Okay lang ba stock ung ipapalit ko? Or rethread nalang sa final comp?

[@kyleasuncion422]

@@VidzMoto correct me if I’m wrong sir final comp is ito ung part na e attach ung rear tire diba?

[@jaamirasuman3175]

@@kyleasuncion422final drive gear sir, yan yung axle na pagkakabitan ng mags..

[@JCMoto143]

Wow..astig idol...pa libre Naman po

[@wauuppoypoy7472]

Stock ba pipe mu boss

[@VidzMoto]

sir kalkal stock pipe na po

[@jjlaz828]

Sir paano mo naiconnect cp mo sa ecu?

[@VidzMoto]

Hi sir, For stock ECU need mo bumili ng OBD Scanner sir na bluetooth i connect mo sa Data Plug ng Motor. Ngayon kasi sir naka AfterMarket ako na ECU thats why may app po cya and nakikita realtime ang stats sa phone.

[@neilque4336]

San ka nakakuha ng parts bossing?

[@VidzMoto]

Search mo lang si MothaiKonzep sir sa FB

[@HONDALUIGI21]

It's not good if you're looking for fuel economy

[@toryo5239]

sakto sa pcx yan.. tapos palit bola lng. ayos na.

[@wauuppoypoy7472]

Center spring Ilan rpm den clutch spring?

[@VidzMoto]

Center Spring sir 1000rpm clutch spring stock, flyball 17grams

[@wauuppoypoy7472]

Hanggang naun parin motor mu paps

[@zikrilhakimramly3396]

I already remove it because top speed improve but hill climb so bad

[@VidzMoto]

change the flyball sir to a lower weights and have a 1000rpm center spring. This will improve hill climbs. But if everyday you are in a steep road, better use the stock gearing.

[@zikrilhakimramly3396]

@@VidzMoto already change to 1000rpm center spring...lower flyball but not so much improvement.. i think for standard engine not suitable

[@VidzMoto]

@@zikrilhakimramly3396 maybe sir, it all depends on riders weight and preference.

[@juanandresgarcia1095]

Changing to a stiffer contra spring might just do the trick. However, it will change your driving experience. I quite like the back shifting of the stiffer springs

[@kabigtingrodney]

Try mo 1500 center spring 1200 clutch spring Hirc pulley set Stock bell at clutch lining 100kg rider here sobrang lakas sa paakyat Top speed 113 adv 150 w backride. Cons walang arangkada pero gitna at dulo damang dama mo ligaya. Ndi pang daily use maganda lang pang ride. 34-35km per litter ang sunog ng gas

[@ohmacc9603]

malakas ba yan 80kph nga lng napatakbo mo

[@VidzMoto]

dyno tested sir nakaka 125kph, mahirap mag test sa public roads. pinaka tops ko dyan sa daan 117kph sa mabitac, tanay rizal. konti lang naman po ang naitutulong nyang gear na yan, since isang teeth lang lamang between stock. pero nag dedepende parin sa bigat ng rider at condition ng motor.

[@wauuppoypoy7472]

So Anu balita motor mo naun .

[@VidzMoto]

so far yan parin gamit ko sir, mag release ako video soon about sa 59mm bore up.

[@wauuppoypoy7472]

Nagpalit kna block,maganda update Yan paps

[@MrRGM10]

Mahina d nga pwede d magpalait bola. Need to experiment

[@bantongworks]

Boss tanong lang po same lang to sa pcx 2018 model no??