HONDA | CB1000R | WE MAKE FIRE | Fitting the new exhaust from BLACK WIDOW

[@djacid4100]

Just taken my black widow 200mm full system off, and gone back to the stock. Such a relief to the ears. It is like taking a tight pair of shoes off. Nice and quite and peaceful, can here the purr of the engine now. That's me done with aftermarket exhausts. Already have tinnitus from loud music and loud bikes.

[@Mrfish2015]

Ear plugs work well lol

[@chrisweston9764]

Quite right. I Wish they did off the shelf SS systems that aren't super loud. My stock exhaust is shitty quality metal but I also don't want it to really be much louder

[@royalwood4693]

🤣🤣

[@cristianalexandru3332]

Are you that old man😂🤣,,,,just joking

[@motomat2]

I agree,stock system at certain rpm there is an intake roar that you wouldn't hear with louder pipes,bit of character for Honda engineers to build in. Put on a racing tip and you could tell the difference straight away,engine is tuned for the stock muffler big time.

[@koshtie]

Hi mr fish at least you got some instructions with yours , i didn't get any & its blowing like a pig from the down pipes , so its off again, my exhaust is on a cbr900rr , did you get any exhaust paste with your kit ? atb Wayne.........

[@LambChopRides]

Hope you twisted the lambda sensors the opposite direction before screwing them in.. Doesn't twist them then 👍👍 good video though mate

[@Mrfish2015]

Lol yes all straight , only the rider that’s damaged

[@martinkavanagh196]

When a younger me had a Subaru WRX - I was in love with the neck snapping take-off .. BUT then I had the middle "box" removed & replaced with a straight-through BIG-BORE .. SO loud & head-achy on long trips that I had to get shot - and realised that I was getting old. - BUT that sounds beaut.

[@AndyManCam]

That. Sounds. Nuts. No way I’d get 100m from the garage before having my collar felt by the fuzz!! 😂 Quite jealous of that popping and warrping. Weight saving isn’t too shoddy either. I’m afraid this means we can never ride together though! My bike will likely refuse to run out of embarrassment!

[@Mrfish2015]

They won’t notice 😉 it’s warm sound

[@wayne478]

Looks great, do you remember the torque setting for the 8 header bolts? Thxs

[@keithappel5021]

Sir you are one of my favorite channels your humor and taste Are absolutely great I’m curious am I going to have to re-tune the motorcycle after putting a whole system on it seems to me you took the cans off put the system and it sounded in ran Great if you get the time please tell me did you have to remap it

[@rzu7120]

I’m surprised you didn’t have to remove the radiator to get to the exhaust nuts.

[@Mrfish2015]

Thought about it but didn’t need to

[@grenphelps7455]

Future note...the gaskets fit in the holes and are held in with a tiny bit of grease so they don't fall off....👍👍

[@Mrfish2015]

I thought that after 😂 should say in the instructions to be fair ha ha

[@grenphelps7455]

@@Mrfish2015 yeah the instructions were shite, I did feel for u.. 😅😅

[@keithsbitsandpieces]

Did you take out the old gaskets They are the copper coloured ones?

[@splodge57]

Prefer the standard exhaust, quiet so you can hear the purr of the engine. Also saves me time, money and aggravation.

[@Mrfish2015]

Saves a load of weight

[@johnrocker2986]

The chronicles of mr fish go on a diet and save tons.

[@jaromor8808]

@@johnrocker2986 also where it matters waaaaay more :)

[@royalwood4693]

I have the same bike would love to know if it now needs to be tuned in any way?

[@Mrfish2015]

Yes it needs a tune ok in sport but makes the throttle choppy on the on/off bit at slower speeds

[@keithappel5021]

Sir you are one of my favorite channels your humor and taste Are absolutely great I’m curious am I going to have to re-tune the motorcycle after putting a whole system on it seems to me you took the can off put the new system on and it ran great sounded great do you have any information on how many horsepower you gained and did you have to Remap it

[@Mrfish2015]

I would advise a dyno run and map , I didn’t but would have if I kept it longer

[@cristianalexandru3332]

How it is the ride bro coz I'm looking to but one and I just heard is kind of soft I mean it's bouncing a lot,,,, I'm between mt10 and this

[@craigs2363]

Looks and sounds awesome, great work! I found I kept dropping those baffle screws in similar exhausts too - but a magnet helps easily retrieve them again (rather than resorting to can rattling!)

[@Mrfish2015]

Non magnetic screw , I did try with 2 different magnets

[@xxthehuskycaboosexx]

I put a full akrapovic exhaust on mine, but I never got any flames. My old FZ09 used to spit flames like a dragon, my CB1kr, not so much 😭😭

[@mikemorris1465]

Great instructional video, I watched AndyManCam's too so I've got all the info I need for my new system when it arrives! Decided to go with the SC Project full titanium system with an S1-GP end can. Got it booked in with Jordan Bikes in Leeds for half a day on the dyno and an ECU + throttle remap. I'm hoping mine pops and bangs too but I suspect it won't once it's had a proper tune. My main gripe with this generation of CB's is just how bad EU emission laws make it run from factory! This bike has a lot to offer once it's mapped and a full exhaust system is fitted.

[@markbenson7670]

Did you re map the bike

[@stianstorengen9579]

Without having the instructions myself or fitted one, it seems it would make more sense to assemble the whole exhaust before fitting it to the bike, also wrt the numbering of the downpipes.

[@Mrfish2015]

It needs fine adjustments when on so has to be loose so you can adjust the little parts

[@willhoult]

Sounds great and looks sweet

[@balex96]

Sounds great. I just ordered the slip-on for it. Do you think with the full exhaust might cause any issues with police or MOT?

[@shanemma1188]

Where can I get one? I love the Sounds.

[@paultanton4307]

Good effort Mr Fish - its always the case that however well you plan a Job it never quite works out the way you had hoped,i did wonder about Exhaust Cement,are the Joins sound ( excuse the pun lol ) without it ? .

[@Mrfish2015]

So far so good but I do have some just in case

[@nightmare6043]

I have the same bike and I put full system by akrapovic. I think yours maybe sound a little louder.

[@somedude9378]

Hi there, I might be a bit late for this, but I wanted to ask anyways.. wasn't there that brand's sticker on that exhaust? At least on their website there is, so I was wondering where you left that! Looks a lot better without it to be honest

[@Mrfish2015]

I never put it on

[@stephenhansen8034]

Hello from Alaska here, been watching the videos for a while. Definitely appreciate the garage scene. Helps that this is the next bike I’m interested in getting, do you have more mods for the CB coming soon? The exhaust is excellent, flame on!

[@Mrfish2015]

Only other thing I did was crash bars but no video .. andymancam has done one for the same bars he has a few accessories and mod vids on his channel

[@johntheaccountant5594]

I would have tried to hide those flange bolts and nuts on the last section by twisting them round to the back / inside of the bike if possible.

[@BiglumpADV]

I've had black widow end cans a couple times. Sadly they really don't last, build quality wasn't great and the carbon seemed too get tatty really quickly. The rivets started to separate which was annoying. They're a British company so it's nice to support UK firms, but I'm not paying out fire that lack of quality. Current bike has a Delkevic exhaust on and it's much better!

[@Mrfish2015]

I’ll have to see how it goes , I have a delkavic on the shelf

[@Dp3.16]

Never had an issue with delcavic 👍

[@timmcvittie436]

So much better 👍

[@TheSweetasanut]

Will it need Dino now as they are tuned so lean from factory

[@Mrfish2015]

Yes

[@DjMarkyBatch]

Great video, only now do I realise the effort of making these videos after starting to do my own channel. Well done. Enjoy, stay safe!

[@chrislecouteur2360]

Mr Fish ...... Hmmmm ...... AWESOME ..... love it thinking of this bike or new S1000R...... but that sounds the dog's bollocks .... New subscriber

[@Wats1984]

Good video! Those instructions weren’t the best were they. Flames from the exhaust was mega! 🔥 👍

[@richiektm]

Not sure if you realised it or not you have left the old copper gaskets in place and then fitted new ones over the top of the old OCD will kick in and would have to do the job right sorry pal

[@Mrfish2015]

No worries it’s was rectified after I made The video

[@kristophertrout7328]

Break out a cigar and light it with the exhaust flame 🔥 😎

[@chestnut1969]

That full system really is the dogs nuts, love the flame! Remember to wear some earplugs...

[@andyboyes05]

Sounds like a proper sportsbike now 👍🏍

[@rocketrollsvlogs7625]

No need for an ECU flash?

[@Mrfish2015]

Will need a tune for sure

[@cloggsy1971]

How many times did you say ‘end can’ 🤣😂🤣😂 Full system is CLASS 😎

[@Mrfish2015]

More than I thought it seems lol

[@marcusgeorge1825]

Great work Mr. Fish! Nice video as always. I’d be interested, in time, to see how the exhausts change colour. One point I’d like to make is it’s always best to handle new exhaust systems with the thin rubber gloves so you don’t leave any finger prints. As these will become permanent once the exhaust gets hot and changes colour. Especially for a full titanium system (which this obviously isn’t). Stay upright and stay safe! 👍😎

[@BrosefRides]

Good reminder!

[@dutchdryfly]

You are not planning trips in the future? No CE for the exhaust is asking for trouble in most European countries.

[@Mrfish2015]

Chance would be a fine thing

[@djacid4100]

Always best to unplug the O2 sensor before you unscrew it. I hope you put a shit load of loctite on that removable baffle. Once you break that factory seal it forever comes loose and you end up losing it.

[@Mrfish2015]

Factory seal ? It’s screwed in .. plus is on my shelf so no need to worry

[@djacid4100]

The chronicles of mr fish, Yeah I know but once you unscrew it and remove it, then put it back, even with loctite on the screw they always seem to work their way lose. At least in my experience. I lost 2 Yoshimura and 1 fmf, and they 35-50 quid a pop. If you not using it though you not have to worry.

[@motomat2]

I actually like the original breadbin can ,sounds good enough to me and the Cb runs well with it. BUT I have tinnitus from loud bikes and working with chainsaws and heavy machinery most of my life....lol.

[@DjMarkyBatch]

There are enough bikes that sound awesome with stock exhausts. Ktm 890 dukeR, Africa twin AS etc. I’m done with aftermarket. I’ve done this faffing and the noise is impressive but I think it spoils riding the bike long distance, lol, and using comms

[@Mrfish2015]

I’ll put the baffle in for distance , plus I have the cub for travel 😂

[@splodge57]

Impressive to who? 🙉

[@DjMarkyBatch]

@@splodge57 to my ears :) (and eyes), but not my wallet!

[@iannsr125]

Sounds awsome

[@mikewatson361]

Your on fire 🔥 Mr Fish 👌🏍🤭

[@The_Arby]

Haha...Repeated yourself alot, lol Looks GOOD mr fish :-)

[@Mrfish2015]

It’s my age

[@The_Arby]

@@Mrfish2015 Wait til your 63...It gets worse mate, lol

[@Bengeyboy]

Now go and find that long tunnel 🔥😉😁

[@gordjy]

ill give you a trick for getting screws on cans, MAGNETS!!!

[@The333]

So this was a great video, mate. Nice exhaust the and flame pops were cool. I am curious though - will you now need to have the bike dynoed and re-tuned? I was always under the impression that if you replace a full system like this, it needs to be re-tuned or the fueling will be too lean and you can damage the engine? Or is that BS? One of the reasons I have shyed away from a full system - I don't really want to mess with re-tuning the engine...

[@Mrfish2015]

It will definitely need some kind of tuning

[@jamelvilmont3561]

Did you get this bike retuned? Where and what kinda of time up

[@paullovesey4863]

3:00, geez someone likes Jack Daniels

[@Mrfish2015]

Maybe

[@michaelwade1092]

hey Mr Fish, im guessing the hand is ok? Vid was ok, although i look forward to more Honda Reviews. Best wishes as always!

[@josh786manchester]

Awesome!!

[@Ravan_Caw]

👍🏻👍🏻👍🏻

[@TheSweetasanut]

Good vid well don sir

[@denisrailey777]

Blackwidow seems to have a communication problem. Especially when things don't fit as it should.

[@genxkevin]

Am I delusional? this full system with pipes is 800 USD? holy cow, you can't touch a full system for that! I am seriously considering this one. Sounds amazing. My 1000r is coming in about one month from factory... theres a huge shortage of bikes due to production delays...cough cough

[@NooBiker]

Interesting. After market exhausts are not really for me (and the twats riding past in the evening revving the tits out and popping their exhaust on the A12 two blocks away annoy the crap out of me but ho hum), but nice and informative and I hope you enjoy that responsibly 👍🏼😉

[@Mrfish2015]

It’s quieter now

[@pilotdaffy]

Wow, you've convinced me, single cylinder engines are easier 😂😂

[@WilliamAndrewPhilipBodie]

Yeah Jack Daniels told me your not a mechanic :_:

[@johnrocker2986]

Honda spent millions, employ very clever engineers so you can have reliability, power, economy and longevity but why do so many choose to buy flimsy shed built accessories is beyond me.

[@Mrfish2015]

Not really a valid point but I get where you’re coming from .. the boffins strangle a bike to fit emissions, of the were all perfect from the factory they would all be standard in superbikes etc

[@johnrocker2986]

You have a road bike not a race bike and get it dyno'd against the standard you may eat your words.

[@xxthehuskycaboosexx]

john rocker lmao the designers made an exhaust that succumbs to terrible EURO4 compliance, along with the tune. go talk trash somewhere else

[@azlong4596]

I chased a dog down the block but couldn't catch him to look at his nuts to see if you were telling the truth about what the exhaust system looked like, oh well, my loss I guess.

[@Mrfish2015]

😂

[@BrosefRides]

Excellent exhaust and install walk-through. Those fireballs are tits.