Honda CB500F - USB Charger Installation

[@zsinormotors]

►USB Charger: www.banggood.com/custlink/Dmm5TuU0NC ►Motorcycle products: www.banggood.com/custlink/vvDHuTU0AP ►Coupons: www.banggood.com/custlink/D3m83Kh5SJ

[@RoadsideChannelTX]

I'm really starting to dig your videos about this bike man, you make everything look so simple and easy! Thanks bro!

[@jgb1549]

Thank you. I did this install on a CB500F from 2018 and it worked perfectly.

[@lucsalander]

I followed your tutorial, and I succeeded ! Thanks

[@IIghostu]

thanks very smart, straight to the point. I understood everything. wish there were more videos like this.

[@drewmorg.]

Dude your channel is amazing. Really thank you for all of this!

[@mbj1163]

Really nice clean job and very helpful video. Only thing, I'd change would be to pick up a bag of assorted heat shrink tubes (costs about a dollar at Harbor Freight). They can be cut to size and make a nicer insulating finish than electrical tape. Also worth it to spring for a shorter lightning cable for the phone, but I'm guessing you did that after posting the video. Thanks very much for posting.

[@michaelbrowne541]

I can't believe how easy you made that look.. I can almost guarantee I would have some sort of catastrophic failure if I tried that...😂 And I don't even own the bike yet.. I'm trying to find a dealership that actually has a 2021 CB 500 X... In georgia🇺🇸 great job..👍

[@ilive4d80s6]

Still in the state of Georgia? I grew up there in Clarkston. Have so much fond memories.

[@drew3811]

Thank you for this!! Finally someone do something the right way. 👍🏻

[@manuelhartinger4866]

Perfect - i did it the same way after i saw your demo - thx

[@birdtheword7836]

Like your videos, can you zoom out to see the area of work before getting in on the close ups?

[@lucsalander]

I think at 0:28 it needed a zoom out yes, otherwise it was good

[@nateellenberger6043]

...now this is an "installation" video (not like the heated grips video which was very basic). Fantastic steps on how to install...I gotta try it on my CB500FA soon.

[@raw71660]

Thanks for the video I guess this would work on CB500X

[@ramm35]

Fully approuved on cb500f 2016

[@migoone37]

Sehr informatives Video! Danke sehr.

[@SgtsTanTaco]

Hello, Love your video series on the CB500, I just picked up a 2015 CB500 myself, I'm curious with the wiring, how did you know that was a hot positive wire? The install looks like a cake walk.

[@michaelcoffey2706]

Good video. I was just wondering why you didn’t get rid of all that excess wire?

[@guntherroth3837]

Very helpful video. Thanks a lot. My CB500F has two black tubed wires not one. Which one is to chose? Or will both work?

[@diabolo6319]

Thanks for your video ... the link doesn't show the good charger on BG (yours is 2 usb, the link is only 1)

[@cachitohonda]

Hola , te consulto de donde sacas corriente para el uso, puedo sacar del otro para faros auxiliares. No hay problema de usar esos,cables. Gracias

[@bblltterry]

I’ve used those shitty connectors before and won’t use them anymore if they are exposed to the elements. I highly recommend soldering and heat shrink/wrap. Great vids.

[@saminstrumentals]

Does this work for 2022 model? Thanks for the helpful videos :)

[@Neptune-rq2if]

Nice! thank you very much

[@GeordiLaForgery]

Great recording, but it's easier to use the Option connector under the seat.

[@erikeggenbakstad]

Hmm, install is not the problem. What I'm wondering about is it connected trough it's own rele and/ or is it connected trough ignition (I think so) so it doesn't drain your battery during stops _ engine off. I guess the fuse is 5amps?

[@amen6846]

Is it the same procedure for 2019 Honda CB125R ?

[@bartekp5131]

What power fuse did you use, 2A?

[@danielrosner3877]

thanks for your video. I have a CBR 650 F 2017, do I also have this connection under the right fairing? Greetings from Germany

[@ilive4d80s6]

Im not familiar with electrical system on this bike. What is that your installing to? I remember on my old cb300f I just installed it to the battery. I want to do it your way since I have a 2013 cb500f, and it looks much easier instead of leading through the tank from the battery , but before that I want to know what it is.

[@zsinormotors]

This is the stock wire to connect a USB charger. This way it won't drain your battery. It works only on ignition.

[@ilive4d80s6]

@@zsinormotors Thank You

[@draghz]

How to know if my suzuki have this accesories install?

[@robclay]

excellent video and just what i was looking for, is the charger you fitted fully waterproof and have you tested it in heavy rain yet?

[@Jasfras1]

It can't be waterproof in the rain when in use.

[@mixtania4859]

Hello there I have a cb500f 2014 And I need your help please How can I contact you?

[@troyrucker2659]

Would I have any issues hooking directly to the battery?

[@mrsuppi10]

Szia. Az en CB500F-em nehezen indul mikor a stand lent van. Kicsereltem a stand switch-et de a problema nem oldodott meg. Mikor fel van hajtva a motor tokeletesen indul. Ket kabel (zold es zold-feher) megy be egy 2x24 pines boxba. Gondoltam megnezem hatha ott van erintkezesi hiba. Nem tudod veletlenul hol van ez a box? Hi, when the kickstand is down on my CB500F the bike does not start smoothly. When the kickstand is up it starts straight away. I have installed a new kickstand switch but it didn't solved the problem. 2 cables are coming from the switch (green and green-white) and they are going in to a 2 x 24 pin junction box. I thought the contact problem could be there. Do you know where that junction box is?

[@berniebober123]

great video

[@st4849]

Very nice! Do you know how to install it on a CBF 600 SA (PC43)?

[@jaggerati8758]

szia! egy navit szeretnék ugyan igy bekötni csak nekem nincs meg ez a vak kábel, viszont ugyan ott megvan a fekete fehér, szerinted arra rá tudok kötni ?

[@lucsalander]

A perfect video

[@iplaygamesnoob]

Hi, i like watching your videos and i know you had a CBF 125. Did you have any running problems with the engine? I have a 2012 with 21k km on the clock and im having a problem where on my first start of the engine the engine just stalls. I already did valves at around 19k km and that fixed it but im getting the same problem again. I did them today again since they were again a little over spec but after my first start after the valve clearence adjustment the engine stalled again after like 10 seconds. Did you have this problem or not?

[@SergeK6]

Hi, i know this is an old comment but still. I have a cbf125 (also 2012) myself with 12k km's. I have never encountered this problem, just to let you know

[@Jasfras1]

Does it catch the tank on full lock ?

[@aymericguibert9793]

Merci ! Ça marche sur un cbr 500r !

[@TheJet742]

Tu sais sur quel fil la prise a été connectée ?

[@TheJet742]

@BLUCKBUSTER j'ai fais l'installation, et non ma prise n'est pas alimenté lorsque la moto est éteinte c'est un fils apres contact

[@JuanAntonioGordo]

Excelentes videos Crear videos

[@twiked]

Seems only available on CB500 2016 and later.

[@igoralexandrov4812]

True. I was trying to do it on my cb500f 2014 and there is no this wire. To author: could you suggest what to look for?

[@mustangw8ford415]

You should have put the charger head down incase if it rains, water 💦 won't get inside the charger.

[@u563rick6]

What’s your plan if it rains? Will it dry out and be fine or just not to ride in the rain?

[@ianglynwilliams]

Yeah that’s what I said too... I think the answer is installing the cube upside down rather than how it’s depicted.

[@bblltterry]

Maybe that “cap” is semi water right. Maybe if he’s caught in the rain he’s just unable to use the USB’s.

[@michaelcoffey2706]

Ian GlynWilliams yeah he could possibly just twist it till it’s upside down.

[@davidayala666]

uh, lo conecte director a la batería, hice mal? gracias por el video 👍

[@JuanAntonioGordo]

Mal rollo siempre tiene corriente. Mejor q lo corte la llave

[@davidayala666]

Juan Antonio Gordo , gracias por la ayuda

[@xpit-bullx4283]

Entonces esta perfecta la instalación que hizo este hombre?

[@oscarsolis805]

@@xpit-bullx4283 , si yo se la copie y no tuve problemas, ahora espero sacar del otro cable energía para unas luces exploradores que compre.

[@Nc0184]

hahaha nem os mecanicos da concessionária da honda tem esse cuidado todo

[@ErConos9]

👏👏👏👍😊