Honda CB750 clutch remove & install

How to remove and reinstall the clutch on a 1972 Honda CB750

[@MikeT]

Looking for more Honda how to videos? Check out the whole playlist kzbin.info/www/bejne/i3bTnHenaLqtsMk

[@abdulfayez6897]

You made it look so easy! Thank you for the helpful video

[@MikeT]

Glad it helped

[@007mercucio]

Awesome video, thanks! Showed me how to adjust my clutch on the 1973 model.

[@MikeT]

Glad it helped

[@thereve]

Do you have to drain the oil do one of these? I know most of the oil is up in the tank.

[@Mattwest1985]

I have a 1973 cb750 and my clutch acts a little funny right after starting but when the bike warms a little the clutch works fine.🤔 I’m wondering why. Kinda makes sense since it’s a wet clutch but I changed the oil to see how that works. I figured the previous owner might have used an additive or something but tomorrow I’ll see how it does.

[@Mattwest1985]

Badass video bud. Thanks for the service! 👌🏻

[@paxonearth]

What if you break off the little metal tab you bend up/down? And would this be close to the same process for a '91 750 Nighthawk?

[@MarioLopez-tt1ey]

Great video.. right to the point thanks!

[@amateurastronaut5006]

What order do they go in? 3 in and double steel plate or 4 and then double plate? Then the rest.

[@Mototistampls]

Great video! I just got a 1975 and clutch doesn’t much, it is pretty much stock. That’s means it needs to be rebuilt or can I just do what you did in this video? Thanks for the nice video!!

[@troudecul69]

When you change your clutch, how to know what is shot and what is not? The plates are for sure burn out but are spring usually to be changed ? Thanks, good video !!!☺

[@MikeT]

If you get a rebuild kit it will come with everything you need generally

[@bkelsey6692]

is this the same for the 90s models?

[@nathanaelfrye829]

Where did you buy your kit from

[@RustyDusty90]

Should a 77 CB750 clutch be all oily when you open up the cover?

[@MikeT]

Yes, It's a wet clutch

[@eddieshittie4368]

yo the chamfered side of that funny nut with lock washer was facing out then when u put it back u said that has to be the other way. Is it or am i looking at it wrong?

[@blazerobbins3958]

Does a regular 7/8 fit that nut?

[@MikeT]

No

[@Bmack13]

@@MikeTwhat do you need then?

[@electriceagle7598]

@@MikeTwhat kind of socket is that?

[@ingeebeltoft]

Hm - is it a dry clutch ?

[@RustyDusty90]

That’s my question, opened mine up and there is oil EVERYWHERE

[@fryloc359]

Its a wet clutch, but the cb750 is a dry sump.

[@ghostmost2614]

@13:15 is someone hitting a Bong...twice?