Honda CRF1100L Africa Twin - Pannier Racks Installation

[@TLE1977A]

I still trying to figure out why the top rear mounting bar from the hoop to the bracket on left side has a bend in it and the top rear bar on the right side is straight. Do the hoops site at the same height?

[@sav66]

Such a simple fit up, compared to my 2019 A/S.. great product/ products.

[@Outbackmotortek]

neil savage thanks!

[@jackk1583]

v/nice install/clear/ ques: is this set up avail for 24 ATAS/ manual w/alum panns? tkx

[@danbraden4401]

Just got a base model AT. When will these and the crash bars be available? Had it all on my 2017 and loved them, so of course I need them on the new one with my Mosko luggage.....

[@kjaw7278]

So, does this mean you have the new engine guards (Low mid high) for the 2020 ATAS? In White please?! 😍 Dual Sports PLus is waiting to put them on mine.....

[@Outbackmotortek]

Kjaw we’re just about to release the protection parts. In white as well as matte black and matte metallic silver

[@kjaw7278]

Can’t wait!

[@kjaw7278]

Is there enough “heat” clearance on the muffler side for semi rigid soft bags?

[@Outbackmotortek]

Kjaw it’s always suggested to add a heat shield. Most soft pannier brands offer it.

[@fabriciopajaro7878]

how efective if is used oly as a Rear crash bar??

[@simonglobalwalkaboutnet6320]

So ok, just got your racks for my CRF1100L as advertised through Mosko Moto and I look up how to fit them to see that you're fitting them on the adventure sport model... Which is nothing like the standard model. Am I missing something here? Because my bike doesn't have those little holes as shown at 4 min in to the video...

[@Outbackmotortek]

The note is on our website. It clearly says you must have the original Honda passenger grab handle and its base in order to install our pannier racks. It’s optional for standard CRF1100 and default on Adventure Sports CRF1100

[@simonglobalwalkaboutnet6320]

@@Outbackmotortek ahh, but it was ordered from Mosko Moto and it doesn't state that on their website. Just reread it to make sure.

[@oli-no-way]

I love your produkt 👍

[@Outbackmotortek]

Oliver Herzke thank you for your compliments!

[@NicolasGovetto]

Hi, how many centimeters the pannier racks are protruding on each side ? Thanks.

[@Outbackmotortek]

@@NicolasGovetto the asymmetrical racks are 56.5cm wide, the symmetrical racks are 61cm wide

[@NicolasGovetto]

@@Outbackmotortek thank you for your swift answer.

[@Fatsliman]

Hi, Is it fit for 2020 AT Adventure Sports? How much is it? Do u hv the side cases? Tks

[@renolta1365]

Do you have a video or instructions showing how to install the Xframes on these racks? I ordered with XFrames and it does not seem obvious to me. I appreciate the videos and find them helpful, but I would rather have printed instructions to complement the videos.

[@Outbackmotortek]

Paper based instructions lack details. We had them for years and then ditched them. Videos are the present and future thanks to the details we can include in them. The Rotopax installation is pretty simple but it’s explained here starting at 1:50: kzbin.info/www/bejne/qHiboKZurpxqjq8

[@zackr8444]

Is this the same install procedure for the asymmetrical pannier racks as well? Thanks

[@Outbackmotortek]

Yes, the exact same installation process.

[@joegelencser2571]

Do you have a rear bracket for a non adventure Africa twin??

[@timtarbet7301]

Hi, will these fit the 2021 AS ES ECT? I know it says they will on your web site, but so did your competitors & they didn't. They hit the plastic by the passenger foot peg.

[@Outbackmotortek]

Overland Expo outfitted an Adventure Sports ES DCT model last year with our Ultimate Protection MAX package: www.overlandexpo.com/ultimate-overland-motorcycle-2021/

[@timtarbet7301]

@@Outbackmotortek Thank you for your quick response. I've seen that build & love it. So, NO cutting of any plastics to make them fit?

[@Outbackmotortek]

@@timtarbet7301 if there was the need for any interference with plastic parts on the DCT ES model we would have heard about in the past two years. You can also ask around on Africa Twin forums though.

[@timtarbet7301]

@@Outbackmotortek Thank You.

[@danbraden4401]

I'll buy those for sure..Do you like the 1100 better then the 1000?

[@Outbackmotortek]

living2 Day yes, it’s just better overall

[@BreizhWolf]

Ca m'a convaincu !

[@robertfancher7381]

Can you do an installation video for the Honda CRF250L? Or at least make a video on how they look on the bike?

[@TLE1977A]

Are you going to make a symmetrical set of racks for 2019 crf1000l?

[@Outbackmotortek]

No, we won’t. Sorry

[@3angle906]

what is the weight of these pannier racks?

[@oli-no-way]

when are the products on sale?

[@Outbackmotortek]

Oliver Herzke we’re looking to start around mid March for this item

[@sameermoto]

Will these work for non Adventure Sports model?

[@Outbackmotortek]

Sameer.Design yes but you must purchase the OEM passenger grab handle from Honda and install it on the standard CRF1100

[@welsewool]

Does it fit CFR1100 2020 non adventure? )

[@Outbackmotortek]

Yes, but you must have the OEM Honda passenger grab handles installed on your standard CRF1100L

[@foodwarrior449]

What bags fit on these?

[@Outbackmotortek]

Food Warrior practically all soft bag brands.

[@foodwarrior449]

@@Outbackmotortek Thanks I was looking at the Kriega overlander ones

[@Outbackmotortek]

Food Warrior they’ll work well, just make sure to get our X-Frame pannier racks

[@volodymyrspyrydonov]

Is you rack made or black steel or is it aluminium?

[@Outbackmotortek]

Vladimir Spiridonoff always aluminum.

[@alainbrouillette7740]

@@Outbackmotortek Is it only in black , or we can get silver like the crash bar ?

[@Outbackmotortek]

Alain Brouillette black only for now

[@mardelplatalimousines3423]

@@Outbackmotortek perfect !!

[@rustyevolution6298]

These look like a great product. Too bad that they are unavailable.

[@Outbackmotortek]

Thanks. They’re new but we’re sending them to our dealers. Which country do you reside in? I can provide you an estimated availability

[@rustyevolution6298]

@@Outbackmotortek I'm in the US.

[@lordvader2060]

Spoiler - Kit includes washers

[@welsewool]

Have just received my package without brackets ;( Cryyyyyyyy

[@Outbackmotortek]

Please send an email to [e-mail] and we’ll sort it out for you

[@welsewool]

@@Outbackmotortek thanks! already contacted through Czech distributor, hope to get missing part soon. And really appreciate your attitude!