Honda CRF250F Update (Part 2) | Front Suspension | BBR for the win?

Honda CRF250F Update (Part 2) | Front Suspension | BBR for the win?
Here is the last section for the suspension! Make sure y’all like and subscribe! Ride at Iron Mountain coming up but more videos to come in between! Stuff is on the way!!!
KZbin- / @thatguy-771
#crf250f #enduro #dirtbike
Appreciate y’all as always!
Subscribe:
/ @thatguy-771
Recommended video: • HONDA CRF250F Install ...
Audio: Vigilant by Tall Oak Town
Content Owner: Epidemic Sound
Crf250f,Crf250f upgrades,Crf250f mods,trail riding,enduro,off-road adventure,exploring trails,motovlog,Dirtbike riding,Suspension,BBR suspension,Honda CRF250F Update (Part 2),Front Suspension,BBR for the win?,New Honda CRF250F Review,CRF 250 Dirt Bike,front suspension install,honda crf 250 f,honda crf 250,honda crf 250 f trail riding,best trail riding bike,yamaha ttr,trail riding honda crf,crf 250,honda,how to ride trail bikes,daniel sedlak

[@David-jk4ep]

Thank for what you do. Not many people making videos modding these bikes.

[@ThatGuy-771]

Thank you, David! I appreciate the support greatly! I’m glad it can help or even give some insight to these bikes.

[@michaelcrosby6071]

Picking one up in spring. Just subscribed nice explanations and to the point. Thanks

[@ThatGuy-771]

Thank you! I appreciate it greatly. Glad it could help. If you have any questions on anything feel free to let me know as well. You will absolutely love this bike! You’ll see a lot of my shorts that this bike can handle just about anything we have thrown at it haha

[@anthonyprocaccini1259]

I love my BBR suspension wish they work on CRF 250 line as there only concentrating on 110 game but BBR said they mite have some stuff install

[@ThatGuy-771]

Yea everything here part 1 and 2 are all BBR components for the 250F. So you have a good selection to choose from with mods now. They have came out finally with a good variety across a couple companies.

[@TravisBerry-cp6hd]

After installing the bar risers do you have to raise the steering stem & lower the forks. How do you get stiffer springs that match your weight ratio ??

[@ThatGuy-771]

After you install the fork extenders you will lower your forks. This is done by loosening the bolts up on your triple clamp. Link for the rear spring is here. www.crfsonly.com/catalog/product_info.php/cPath/355_360_415_419/products_id/7665

[@TravisBerry-cp6hd]

I’m 5’ 4” I don’t want the bike to sit taller. I do want fork blender screws so can I use the extender & not raise girth of bike @@ThatGuy-771

[@ironthumb3048]

How do I find the community page with the torque settings ? I need to know the top triple clamps torque settings. They are only 10 mm bolts so I don't want to over tighten them.

[@thisguy-615]

Gotta subscribe and go to the channel page, it located under the community tab.

[@ThatGuy-771]

Exactly what he said. Gotta subscribe to be able to see it. and then on the channel is the community tab.

[@TravisBerry-cp6hd]

I am subscribed and I found a community channel and I’m not seeing anything@@ThatGuy-771

[@anthonyprocaccini1259]

Also have you upgraded your valve springs and cam yet

[@ThatGuy-771]

Yup done it all now

[@troyater1609]

Do these springs actually add any travel, since they are much longer and eliminate the spacer?

[@ThatGuy-771]

Nah. They’re not giving anything more really on your travel. They’re just stiffening it up a whole hell of a lot. I no longer run the BBR rear.

[@flappymcbobjoe35]

Do the fork extenders end up raising the handlebar an inch higher?

[@ThatGuy-771]

Yes. It raises the entire front end up an inch

[@flappymcbobjoe35]

@@ThatGuy-771 could that be an issue if you already have a handlebar bend that's raised quite a bit?

[@ThatGuy-771]

Nope not at all. I run oversized 1 1/8th CR high bend bars with the riser adapters and the fork extenders. It’s actually perfect.

[@TravisBerry-cp6hd]

I’m not finding the bar springs on eBay or Amazon. What is the part # on the box ??

[@ThatGuy-771]

You can get this from Hyperlite Moto, crfsonly or BBR themselves. I don’t ever buy anything off Amazon or eBay for the bike. Here’s one link for you and where I got mine. www.crfsonly.com/catalog/product_info.php/cPath/355_360_415_419/products_id/7665

[@TravisBerry-cp6hd]

Thank you I ordered a set. @@ThatGuy-771

[@CuseOutdoors]

That’s odd I ordered the same springs for mine and they were the same size and the stock springs

[@ThatGuy-771]

Hmmmm that’s not right then. Where did you order them from?

[@CuseOutdoors]

@@ThatGuy-771 I ordered them from hyperlite Moto and they came in a bag rather than a box like yours and the bag did say bbr. Hyperlite usually has some good stuff but the reason I was watching your video was because my forks make a clunking sound whenever my front tire is off the ground and comes back down. Im wondering if the springs are possibly the wrong diameter for the tubes because I’ve tried stacking extra washers(only one extra in each side) and no luck still.

[@ThatGuy-771]

@CuseRippin I’m honestly wondering if you got the wrong springs in there. Used the same oil that was in the forks before right? Or did you add/take any away. What was the part number on their bag?

[@CuseOutdoors]

@@ThatGuy-771 A small amount of oil dripped out when I removed the old springs so I did add a very small amount of oil in each side and as for the part number, I ordered these springs roughly a month ago so unfortunately I couldn’t tell ya the part# however I do agree after watching a few videos on KZbin of this swap and no one else having my same problem that they probably sent me defective ones or just completely wrong ones. I may try to add a few more washers and see if that works because the bike rides much nicer than with the stock springs I’m just concerned about wearing out the fork internals due to the movement of the parts. If that doesn’t work I’ll have to order from a different place that has actual bbr springs.

[@ThatGuy-771]

@CuseRippin that’s what my worry would be brother. Are they the same diameter as your stock ones or a little smaller? Wondering if they sent you their 125f springs by chance if they’re not as big in diameter and aren’t any longer. I’d call Hyperlite and explain and I’m sure they could work something out with you though.