Just successfully replaced pump, your video was super helpful, thank you! Glad you mentioned getting 1" cap screws to accommodate the thicker flange. If my key was the same as your key, you were right - the key is rectangular not trapezoidal, and can only fit the right way into the keyway. Tip for others - when removing the OEM pump, go after the 4mm set screw in the keyway first (will need WD-40), then unscrew the pressure relief hose that feeds under the deck, and lastly the four cap screws bolting pump to engine.
@JohnMiller-lh7qpАй бұрын
How do you get the cover off
@hoppy07204 ай бұрын
I just need a unloader. Don't make it
@davidgerber99076 ай бұрын
Now what to do about those stupid chineese tires.
@JohnMiller-lh7qpАй бұрын
How do you get the cover off
@TUDIU2 жыл бұрын
very good video. Do you have the item number for the Pump? I have the same issue with my Excel XR2600 power washer....
@Volfandt2 жыл бұрын
Pump name & model: Himore Pump PW24/2.3L Thanks for watching
@edwardlangley26253 жыл бұрын
Receiving mines today,great video. Already cleaned my moter,so it be looking good when I put it on.
@Volfandt3 жыл бұрын
You should be happy with the new pump. These newer pumps seem to have more power.
@clonefan624 жыл бұрын
I'd use some grease or never-sieze on the shaft so it comes apart easy next time.
@annehechesliverdonation9624 Жыл бұрын
it works, but its not impressive. I did the same swap, cheaper than buying a new one, but if you can find a used MTM get it!
@MarcusHF Жыл бұрын
I have this exact same washer, but I think the gear oil you mentioned is not filled enough in mine. Do you have the owner’s manual? I can’t find it online for the life of me.
@Volfandt Жыл бұрын
Hey Marcus, I don't have an owners manual for it. If you're talking about the pump's oil, I unscrew the tall plastic "breather" and fill the pump with enough oil to come up to the bottom of the hole then screw the "breather back on. I'll estimate I got around 15 hrs on the pressure washer and only had to add alittle oil to top it off one time. Good luck. btw if you think it's overfilled it'll vent it out through the "breather".
@axtonsadventures25242 жыл бұрын
how you check the oil in that pump, has no way of viewing how much oil is in it
@MarcusHF Жыл бұрын
Yeah I have the same question, it seems like one of those things the internet just doesn’t know.
@GOATfml2 жыл бұрын
I did this same pump swap and when I start the engine it wants to immediately rev all the way up. Any idea?
@Volfandt2 жыл бұрын
Sounds like the governors linkage rod is jammed against something. Double check all the linkages connected to the carb. Good luck Rylan
@mym12173 жыл бұрын
I did exactly the same process on mine but when I pull the trigger the engine bogs down, once released the engine runs fine. Thanks for sharing!
@Volfandt3 жыл бұрын
Thanks for watching
@kennypaul1003 жыл бұрын
I have a Honda Pressure Wave PWH2500 with a broken pump. I can't find a replacement pump. Do you know if this one would fit it?
@Volfandt3 жыл бұрын
I did a quick search on your model# and came up with this: www.amazon.com/PRESSURE-VERTICAL-REPLACEMENT-REPLACES-PWH2500/dp/B00ZTCVA08 I don't know if it'll fit but if your pump is under the engine ( vertical shaft engine) the pump I used will not fit as my engine has a horizontal shaft. Good luck
@kennypaul1003 жыл бұрын
@@Volfandt Thanks very much. I tried that link but it says currently unavailable. There was no price on it but I would suspect it would be more than the machine is worth. I might just scrap it and buy one of those wee Lidl ones.
@Volfandt3 жыл бұрын
@@kennypaul100 Sorry I couldn't help. Good luck
@kennypaul1003 жыл бұрын
@@Volfandt No problem.
@rudyyarbrough51223 жыл бұрын
Do you still have the old pump? I need the unloader valve and they no longer make it. Thanks
@Volfandt3 жыл бұрын
Sorry Rudy, that old pump is long gone. Good luck.
@toddrayarmstrong3 жыл бұрын
Hi Rudy, My pump cracked last week and i still have it. Youre welcome to have it.
@rudyyarbrough51223 жыл бұрын
@@toddrayarmstrong Thanks Toddy but I had no luck so I bought a new pump from Amazon for $59. It works great. I threw my old one away since I can't believe anyone would actually rebuild one. That was one of the worst designs that I have ever seen.
@toddrayarmstrong3 жыл бұрын
Rudy... Which pump did you get?
@rudyyarbrough51223 жыл бұрын
@@toddrayarmstrong I got it from Amazon and it is the only one they sold that would fit the Honda with a 7/8 inch shaft that was less than 2-inches long. If you have the same engine that I had, it has a short 7/8-inch shaft.
@grktycoon4 жыл бұрын
Hello, where did you purchase the new pump at and what model number? Thanks!
@Volfandt4 жыл бұрын
The part number is at the 15:08 mark. I got it through amazon. Thanks for watching