Honda HRR2166VXA not running

[@Disdained_talent1]

Wow!!! That's the most gummed up carb I've ever seen!!!That choke lever was really stuck. I loved how you changed the mat after cleaning the exterior of the carb, no point in letting that debris enter the inside of the carb. Hope you cleaned the cookie sheet before you sneaked it back in the kitchen.:)

[@richardmorse5307]

I’m going to have to get a couple of dowels to assist with the assembly of the carburetor on a very good Craftsman mower with a Honda engine that’s been sitting in a shed for 2-3 years. I can see that it would be ideal to get a Sonic cleaner and an air hose to be properly equipped. The Easy Walk controller for the self propelled feature works like a charm (or at least it used to). Thanks!

[@jackhuddleston6830]

Good idea on the Allen tool. I’ve seen guys fight those with pliers and everything thing else. I have that same mower since 2012. Never had the carburetor off. Still starts on the 1st pull. Had to replace the back shield on the air filter. And here lately I had to order the bracket for the drive spring. I own 3 Hondas now.

[@robertmailhos8159]

Nice looking replacement mower for your needs of cutting the grass

[@richardyoung5586]

Nice job Well done great video. Now I gotta pull mine apart and hopefully, I can be as successful as you. One question, where did you find those suspender? SI could use a pair of that clip on your belt? Looks like that. Thank you for a great video news and thread new subscriber.

[@DaleHobbs39]

Thanks for watching. I found the suspends on Amazon.

[@michaeldolan2531]

Hi Dale. Where did you find this clutch assembly? I can’t seem to find a part number, do you have the part number or a resource to find the part?

[@DaleHobbs39]

For Honda parts I use. www.hondalawnparts.com

[@richardmorse5307]

What is the emulsion tube and its purpose? Thank you.

[@DaleHobbs39]

It is a tube with several holes that is located after the main jet. It helps atomize the fuel before it is pulled in the carburetor. images.app.goo.gl/jxF3DgTbnRgGZA9FA

[@richardmorse5307]

@@DaleHobbs39 Thank you. That was a very good video!

[@DaleHobbs39]

@@richardmorse5307 thanks for watching

[@DigZworld]

My HRR2166VXA is making a squealing noise especially when the blade is engaged. I replaced the clutch bearing but it didn’t fix. What should I look for now?

[@matthewcaldwell6763]

Coild be the bearing on blade assembly...i did replace blade assembly with new bearing and a new clutch on mine...squiel gone