Honda Jazz used ECU/PCM programming with the MS908P.

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
In this video I will quickly demonstrated how to program a used engine ECU or PCM, on a Honda Jazz 1.2 from 2012...
I had to program two different modules, and for some reason, this second time I had to do it slightly different... either way, got it done in the end...
if you are interested in know why I programmed an used ECU/PCM on this Honda, watch the video below...
Honda Jazz misfiring on 2 cylinders:
• Honda Jazz 1.2 misfiri...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!

[@95ashley]

Hi luis! This video just saved me on a job for a 2012 honda jazz (European market) thank you dude! Definitely worth a sub from me 😊

[@LMAutoRepairs]

☺️ 👍👍👍

[@mothanagharbe513]

It is good that programming was done in two ways so that we know what to do in case it fails from the first attempt

[@LMAutoRepairs]

😋 True... 👍👍👍

[@beluxauto5968]

I have had this happen the same and I bet it has to do with different specs on the vehicle regardless being the same nr ECU or in your case being 2 numbers off but still the same ECU. It worked and that's the most important . Imagine if it would have been the same issue again😂 grey hairs overnight. Good one Luis.

[@LMAutoRepairs]

Great hairs indeed...🤣 👍👍👍

[@mrgrumpy5116]

Happy two 😄😄👍 thanks for the Sunday vid

[@LMAutoRepairs]

😊 👍👍👍

[@vukasincmiljanic9776]

hello Luis I've been following you for a long time and I love your approach to car repair and I work too, so I'm interested in why you don't try to move the transistors out of the ECU and so you can be sure it will be, it would be a good experiment, you find a gate driver leg and you just pass it out of the ECU and then solder + 12v or - depending on what kind of system it is and so you test whether it will fix the car. You can try this with all systems controlled by transistors or voltage stabilizers such as LM 7805 or current stabilizers. BEST REGARDS. AND WHEN WILL YOU MAKE A REAL WORKSHOP.😄

[@LMAutoRepairs]

Hi I swapped them just to try, and as you have seen, it proved my theory... Yes, I could have swapped them an keep the original ecu, but the programming on these is so easy, that was easier and quicker to just program the second one... plus, open this ecu, was a real PITA.... 😋 👍👍👍

[@jackiemay9471]

slightly different ecu different set up. Chips may be less likely to go subtle differences here s hoping thanks for the video louis

[@LMAutoRepairs]

Possibly... 👍👍👍

[@jasonevans6720]

Last two numbers on ecu are relevant to software loaded

[@LMAutoRepairs]

Only that... Still compatible with the car/engine... 👍👍👍

[@ibrahan7680]

Good job great !

[@LMAutoRepairs]

😊 👍👍👍

[@loschwahn723]

yes it is a great moment every time after to get faulty devices in the market

[@isalmankhan1]

Top work, Thanks for sharing Bro👍 Stay Safe👍

[@LMAutoRepairs]

😊 Thanks!

[@autoteq299]

Hello Luis thanks for the video it's necessary to read the old ECU data and write it back to the new ECU and what about if the ECU have different part number and the car is the same year , Model , will it work ??

[@LMAutoRepairs]

Hi As per the video... no need to read any data, part number can be slightly different, due to different variants, as far as they are compatible will be fine... 👍👍👍

[@autoteq299]

@@LMAutoRepairs thank you

[@electronic7979]

Nice video 👏

[@LMAutoRepairs]

Thank you! 👍👍👍

[@MdHasan-pg6rz]

Good job

[@LMAutoRepairs]

Thanks! 👍👍👍

[@aymenmohamed1134]

Nice job

[@LMAutoRepairs]

Thanks! 👍👍👍

[@MohammadKhan-be7zt]

VERY NICE

[@LMAutoRepairs]

Thanks! 👍👍👍

[@abdulmajedkhalifa2358]

Nice video man. I am wondering should the maxisys subscription be active to be able to do this job?

[@LMAutoRepairs]

No... not for this... Thank you for watching! 👍👍👍

[@rohitchaudhary73]

Very nice sir 👍👍👍👍🛠️🛠️🛠️🛠️

[@LMAutoRepairs]

😊 Thanks! 👍👍👍

[@mothanagharbe513]

good morning

[@LMAutoRepairs]

👍👍👍

[@randolhernandeznaranjo1306]

Muy bien, muchas gracias por compartir,

[@LMAutoRepairs]

😊 👍👍👍

[@tahir1156]

Nice attempt

[@LMAutoRepairs]

☺️ 👍👍👍

[@ebrahimsadeghi5883]

Awesome

[@LMAutoRepairs]

😊 👍👍👍

[@jailankeshwer]

😅 I know .. How's feeling bro.. 😅 I am Happy 😊 like.. when I completed ..

[@LMAutoRepairs]

☺️ 👍👍👍

[@davidvaz10]

Great video, could the same procedure be implemented in a bmw e65?

[@LMAutoRepairs]

No... BMW requires a completely different approach... 👍👍👍

[@fergalmcgrath935]

Hi Luis, great video. I have 2013 Jazz 1.2 with 37820-RC7-G05 and it has one faulty injector SSD 103 transistors (causing misfire). I got 37820-RB2-G17 spare part from ebay - if I move the SSD 103 transistors from the spare ECU to the faulty one, will it work?

[@LMAutoRepairs]

Should do the job, if anything else is bad... 👍👍👍

[@fergalmcgrath935]

​@@LMAutoRepairs hopefully so. I tried swapping the ECU itself but it could not communicate properly (RB2 model has a different wiring harness to RC7 model).

[@aarondunlavey5782]

Its a miracle it started with 0 fuel 🤣

[@LMAutoRepairs]

🤣 👍👍👍

[@stevenhewitt9102]

Hi what other ecu fits my car do u know as this is exactly what is wrong with mine. But I'm finding it hard to get an ecu. 37820-RBO-E18 is my part number. Tho I'm getting the same ecu when checking ebey but it's saying E14 and E13 does that matter. Thinks

[@qasimaslam7364]

Can you use same process to program Renault Scenic 2011 1.6 dci’s body control module?

[@LMAutoRepairs]

No... It is a different procedure... 👍👍👍

[@lamarfarquharson3937]

Can i used this method to disable the transmission control unit?

[@LMAutoRepairs]

Not sure... that might be part of the map, and you might require to flash to ecu with a manual transmission file... Would have to investigate that one... 👍👍👍

[@garybrown5500]

Does this still work if you have the standard interface rather than the J2534.

[@LMAutoRepairs]

Don't know... as I never worked with the VCI version... Sorry...

[@evansmarts775]

I have got the exact same number on ECU what you have in this video ( I have 2013 honda I have found another ECU for 2009 but the last 2 number is G02 instead of G16 ) the rest engine is all the same will it work ? ( Also my ECU has oe UK the other one is JP ) I would really appreciate if anyone can answer please confirm

[@LMAutoRepairs]

Hi Difficult to tell... it might be just a software difference and still work... but unfortunately can't really say... ring the dealer and see if they can help...

[@MOHAMMEDIRFAN-fb5vz]

Hi I just done this but it's still misfiring on injector 2 and 4

[@blessingnaseri1457]

I bought the second hand ecu with the same IGNITION do you think will work if it goes into my bt50 2013??

[@LMAutoRepairs]

Withe the same ignition? What do you mean? 👍👍👍

[@blessingnaseri1457]

@@LMAutoRepairs hi mate My bt50 ecu damage and the mechanic came with the same scanner like yours, he plugged In and tried but apparently the old ecu need to function so he can load data from it into the second hand ecu....

[@FranRomeroo]

Hello This machine tool can program any car or only Honda ? Thank you

[@LMAutoRepairs]

Several different cars... but each case is different... some cars can't do... 👍👍👍

[@FranRomeroo]

@@LMAutoRepairs Need it for a Volkswagen routan and mini cooper

[@LMAutoRepairs]

@@FranRomeroo Slightly different procedures for those... This tool will not be much of a help... You need other tools...

[@ebrahimsadeghi5883]

Does it needs the j box /j 2534 For this procedure?!!!

[@LMAutoRepairs]

Not sure... I only have the J2535, someone with a standard VCI might be able to help... 👍👍👍

[@LMAutoRepairs]

Yes... Bluetooth connection...

[@pedroneves8288]

Now that the car has a new ECU which must have different miles on the clock, and different miles from the ones shown at the dashboard, wouldn't anyone who buy that car and test it with a good scan tool, notice that the miles registered on the ECU are different from those on the dashboard and may think the car has a miles' fraud?

[@LMAutoRepairs]

Hi Not all cars stores the mileage on the PCM/ECU... some only store it on the cluster... Not going to say 100% it is the case on this one... If the car has no big discrepancies against the MOT mileage readings, shouldn't be much of a problem though... But I understand where you coming from... I never actually checked (that I remember), if the mileage was recorded in there... probably should have, but that was definitely not a priority...😋 👍👍👍

[@pedroneves8288]

@@LMAutoRepairs Ok, thanks for the reply. And, by the way, is the owner going to have any problem with the other car key/immobilizer? Is the ECU going to accept the other car key, since it was not programmed with it?

[@LMAutoRepairs]

As I have explained in the video... In this system, is the ecu that is programmed into the immobiliser system... all the keys programmed on it will carry on working as normal...

[@pedroneves8288]

@@LMAutoRepairs Ok, I thought the immobilizer was part of the ECU... 😋I'm not a mechanic! Just someone who wants to learn something along the way...

[@josipdjerfi]

maybe immo system is not the same in 2010 and 2013 year

[@LMAutoRepairs]

👍👍👍

[@londondaddy7013]

For a fiat bravo tjet 2008 is the same?

[@LMAutoRepairs]

Each manufacturer is slightly different... Don't think is the same for that one... 👍👍👍

[@londondaddy7013]

@@LMAutoRepairs how to do for a Bravo

[@LMAutoRepairs]

@@londondaddy7013 Depends on the ecu installed.. Some can't even be done this way... and needs either virginize first, or need cloning...

[@nelsonjagualing7836]

Your scanner is local

[@LMAutoRepairs]

What do you mean by "local "?

[@AuraTrimCoMeath]

We doomed. Soon only bicycle will be used on roads. I wonder whar car manufacturers will produce, when we stopped buying cars?

[@carremote8651]

Fake video

[@LMAutoRepairs]

Fake comment... 😅