Thanks Charles and Javier for having me on the channel, had a ton of fun! Thanks everyone for supporting the build! @T3_Auto
@alitoroganan2442 Жыл бұрын
What xona x2c turbo is it bro
@obsidian.... Жыл бұрын
Beautiful ride!
@obsidian.... Жыл бұрын
What is the gearing in the rear end? The spacing seems perfect with the 009
@ASapWheelie6 ай бұрын
How much was parts and how much was labor?
@TexasVexes Жыл бұрын
450wheel at 9 psi. Gotta love k motors.
@RagingBullNuts Жыл бұрын
That just means it’s a laggy turbo for that power, that’s in comparison to say a smaller turbo making 450 hp at 20 psi. The 450hp on a smaller turbo(sized right) would spool up quicker and have a bigger powerband. Not shitting on it cause it’s all on end goals, I’m assuming he’s looking to increase power and he knows he isn’t in the turbos efficient zone. It’s always about end goal. If 500hp is your goal you want the smallest turbo possible(sized efficiently) for the quickest spool up possible for said power. A small turbo on 40 psi for 450hp would dog a big turbo that’s on 5 psi for the same 450hp. The smaller turbo will have the 450hp almost the whole powerband, while the big turbo will only have it at the higher rpm’s. Which for mountain racing you want the smaller turbo to have a wider usable powerband.
@swanginfleet Жыл бұрын
@@RagingBullNutsYou understand👍
@veejay120793 Жыл бұрын
@@RagingBullNuts I agree to a point.Smaller turbo aren’t usually efficient 40 psi at 450hp, you’re most likely choking out the turbo and blowing hot air so you’re powerband is not wider.
@RagingBullNuts Жыл бұрын
@@veejay120793 I did say “sized efficiently”. The smallest efficiently sized will make for the best power band for this application. 40 psi was just a hypothetical.
@veejay120793 Жыл бұрын
@@RagingBullNuts his turbo is definitely sized right, it’s probably the smallest turbo I’ll put on a k24. He probably see full boost at 3500
@TrayneTracks Жыл бұрын
Honestly would love this over the rotary as bad as that may sound. The k series is the best 4 cylinder engine ever made
@mm6705 Жыл бұрын
have you heard what rotaries sound like? this is a huge downgrade in sound
@TrayneTracks Жыл бұрын
@@mm6705 yes the rotary sounds so sick but the reliability is absolutely terrible so it’s s good trade in my opinion
@billballin6948 Жыл бұрын
@@TrayneTracks reliability is only terrible if you don’t know what you’re doing
@TrayneTracks Жыл бұрын
@@billballin6948 yeah if you keep a pallet of apex seals and some other things on deck then I guess it’s ok…lol I’d rather buy a stock k series and make 500hp and still have a reliable daily driver
@Dazaking719 Жыл бұрын
@@billballin6948says someone that has never owned one. Guaranteed
@css172 Жыл бұрын
Nice edit / intro. Sick K24 Swapped FD RX7, love the colour and styling.
@Andyp310 Жыл бұрын
Man I've been waiting for someone to do this. Would really like to see a high rpm drift car with a K !
@ArtVandelayOfficial Жыл бұрын
Love the swap Styling I prefer oem plus on a FD rather than this
@wildimpo Жыл бұрын
Nice build! No LS
@TrackstarBR Жыл бұрын
So now I want a k24 swapped rx7. My list just keeps getting longer and longer of dream cars.
@TheRyansLion Жыл бұрын
It’s the perfect swap imo, being an i4 it maintains good weight distribution, and still revs as high as a rotary.
@vintage-genes Жыл бұрын
Gears and gasoline did the same swap with a k20.
@SilentSamurai8 Жыл бұрын
I thought that was what this video was about when I clicked on it, admittedly. I figured they were interviewing those guys. Same rear end setup too.
@youtubecomments59516 ай бұрын
The gears and gasoline one is ugly though. This one pretty
@ricepony33 Жыл бұрын
It would be interesting with a Rotrex to make it feel super NA.
@dmlgarage1390 Жыл бұрын
I've got a GT3071R on my K20 and it feels N/A when only running 3PSI and is way faster and drive way better than my rotrex did.
@ThePokeru Жыл бұрын
Beautiful care but the rotary engine sounds so good
@petrolhead8851 Жыл бұрын
Sick build but my brain isn’t putting two and two together with that sound coming out of the rx-7…I think it would’ve been cool to see someone do an all motor super high 10.5k rpm 350whp k24/20 rx-7 so that it keeps that high rpm scream
@Cressfromhell Жыл бұрын
Funny I was thinking same thing. The sound doesn't match the car and doesn't sound good. But an all motor like you said would be dope.
@matthernandez210 Жыл бұрын
I agree. Or maybe a s2k swap. 10k all day
@0mniVerse777 Жыл бұрын
Ye put an f20 engine in there, ez 9000 and if you upgrade cams/valves/valvesprings u can get up to 10k no problem
@l8tapex4 ай бұрын
sweet. Took the built LS3 out cause the Turbo system didnt allow the big IC. Seats look terrific.
@cj41079 Жыл бұрын
Engine bay looks exactly like boosted S2K....❤
@cxbra Жыл бұрын
I truly scratch my head wondering why Honda didnt focus on the K24a as the platform for the S2000. I guess they had already invested so much making the F20c motor...
@texastrill5473 Жыл бұрын
Will the younger generation please start painting your damn cars please. Hasn’t this wrapped nonsense gone on long enough? Engine, brakes, wheels, paint. It’s been a damn solid formula for everything kickass for generations now!
@nasteegolf7 Жыл бұрын
Boosted Boi Kyle needs a RX-7 shell for a K SWAP!!!! LFG!
@vincecarter2778 Жыл бұрын
I'm still waiting on the 2jz civic!! LFG!😂😂😂
@bernardthefourth Жыл бұрын
I think the NA 3 rotor is the coolest setup for a drivers rx7.
@RadDadisRad Жыл бұрын
NA 3 rotor is a screamer and it makes a lot of power
@Unicornpirate Жыл бұрын
@@RadDadisRad Its not that much. They make like 280-290whp. 330~ish crank
@RadDadisRad Жыл бұрын
@@Unicornpirate depends on the build. They can easily make 500whp with porting and custom intake trumpets along with secondary port work. The 26B from Le Mans made almost 700hp.
@jimmyboy92891 Жыл бұрын
@@Unicornpirate that's stock, a stock k series ain't making that
@Red6er Жыл бұрын
better than LS swap, still can't beat the spicy nacho.
@ganeshnauth5692 Жыл бұрын
Thought this was Ben’s rx7 from gears and gasoline 😂😂😂
@connoisseuroftigolbitts Жыл бұрын
How did they find engine mounts to hide the vibration
@nickbianco2750 Жыл бұрын
They are custom mounts and do a really good job at keeping the crazy vibration from the k24 to the engine itself.
@connoisseuroftigolbitts Жыл бұрын
@@nickbianco2750 nice
@TV-nv8qq9 ай бұрын
Do they make engine kits for the K swap?
@ar_x79 ай бұрын
once my rx7 blows up, i'm doing this swap. this looks dope!
@BenjaminButton65738 ай бұрын
Smart man
@BEYTEK Жыл бұрын
Welcome to the kswap rx7 world. Before you know it it will be AWD and have compound turbos.. ask me how i know lol
@riceball4u172Ай бұрын
Nice, what transmission do you use?
@XxdskaterxX Жыл бұрын
Out in Perry park area?
@bikotheanimator6169 Жыл бұрын
That color is crazy.
@chingsoungable Жыл бұрын
You interviewing the car or the guy?
@gonlee1114 Жыл бұрын
This might be the best k24 swap yet
@darbyrichard18692 ай бұрын
Is this the car in cloverworks current giveaway? 👀
@aRTH_IAS Жыл бұрын
The best of both worlds!
@RICARD01 Жыл бұрын
Are the sideskirts on layaway?
@Just_Modify Жыл бұрын
I gotta say $35 per t shirt is crazy expensive bro. Cleetus will give you two t shirts for $35 in his mystery bundle. I was gonna try to win that RSX but just can’t spend that kinda money on one t shirt. Do a mystery bundle with two random t shirts for $35 and I’m in.
@Zone-mc2tp Жыл бұрын
Easy maintenance 👌
@YoshiBuiltTV Жыл бұрын
About to watch again to see how many times he said “custom” lol
@SilentSamurai8 Жыл бұрын
Small side note but the tires are directionally wrong. The drivers side needs to be rotated the the passenger side on each axle. G&G clone.
@Codizz88 Жыл бұрын
Seems like it needs a resonator or something sounds like rattling change in a can.
@gabrieldelacruz4278 Жыл бұрын
Not a bad one for sure, it's like solving a puzzle with missing pieces.
@jeeperzcreeperzz Жыл бұрын
Thanks for making Rob Dahm throw up 😂
@GrantWeidner Жыл бұрын
Sounds strong
@joemahadeo7317 Жыл бұрын
What transmission do you use ?
@ThatRacingChannel Жыл бұрын
They go over it all in the video 😉
@tcrawford97 Жыл бұрын
That color is sick!!
@bungholeracing Жыл бұрын
Wow clean build !
@sneezinhatch Жыл бұрын
How do I get my truck on trc
@ThatRacingChannel Жыл бұрын
Email us! Info@thatracingchannel.com
@ZLAKLR20B Жыл бұрын
Nice car, Looks great and awesome to build the car how you like. Now as a die hard rotary fan with 3 FDs, and they will always be Rotary powered, love i how guys do what they want to their own cars. But one thing, that radiator set up, has the car ever been tracked? because that set up is waiting to fail. NO ducting through the radiator and at that angle with no undertray (or was it removed for the show?), the air is simply going under the car. I guess lucky its not a rotary, but even then I can only imagine a few laps at full send at that thing will cook, same with intake temps with that intercooler set up like that, maybe it works and ide say your lucky if it does but never would i have ever built the cooling like that. Otherwise, great build mate and obviously deals with what you throw at it for your use.
@TS34675 Жыл бұрын
Lol we got "k swaps are cringe" and "at least it's not an LS" 😂 My cry baby bingo is filling up fast.
@looseparashoot Жыл бұрын
Love the FD, burnt orange is so cliche though, I'll give it a 5 outta 10 for unique, looks put together by someone with alot of money is all
@TheMindfulSkater Жыл бұрын
Very cool build
@That1lowaccord Жыл бұрын
Crazy how thats nothing to a k series they can make much more
@bladenrexroth2555 Жыл бұрын
"Jesse, don't do it! He's gotta have at least $100 grand under the hood of that S2000"
@bladenrexroth2555 Жыл бұрын
@ClickOnProfile1128 bye felicia
@georgecupac120226 күн бұрын
Good job 👍.
@hsuhao5400 Жыл бұрын
Where's crazy unquie swap?
@brandonhaywood3391 Жыл бұрын
You made it more reliable but you definitely made it slower
@sergiopadilla4248 Жыл бұрын
He knows more of cars then his life with glasses😂
@VS666 Жыл бұрын
everyone in the comments whining about k swaps and ls swaps like they have the money or know how to do either 🤣
@nickbianco2750 Жыл бұрын
Always the broke ones that hate the most.
@calebskeeper35533 ай бұрын
Why not a b-series? They're running 6's, something k-series can't do💯😄
@burnie896 Жыл бұрын
looks good. BUT.. disgraceful
@MichaelCoolGuy86 Жыл бұрын
Desperately needs some sideskirts
@tonydisabatino Жыл бұрын
Car is amazing
@reycaballero2462 Жыл бұрын
Close your eyes and what do hear when that thing passes you by......
@nazimgafoor7913 Жыл бұрын
Just clicked on the video to say how sad the title made me feel.
@Mistadontplay89 Жыл бұрын
Love this Mazda S2000
@darnell1320 Жыл бұрын
Love the car but thats not oem plus styling.
@KirksKars Жыл бұрын
Sweet ride, but a rotary is what makes an RX an RX 🤷
@davidayuso2815 Жыл бұрын
I’m trying to do this build please send me in the right direction please 😊
@tougefit4881 Жыл бұрын
Less turbo more seat time lol
@chasingcloudsandflavorrevi9817 Жыл бұрын
Lower that thing it’s not a F150 😂
@mryang3644 Жыл бұрын
Kswap the World !!!!!!
@shawnbraden6689 Жыл бұрын
Couldn't ever afford one builds better one lol
@ll-rb7or Жыл бұрын
Camera guy could have focused more on the actual car build , engine bay and parts.... couldn't see much in the split seconds of filming.
@sickpunch1 Жыл бұрын
i hate when they film the guy more than the build
@jeancharlesrabaux5658 Жыл бұрын
Est un 2jz big turbo serait plus logique meilleur chassis que le supra mk4 plus légère 🤚
@Usmc913 Жыл бұрын
Sick rx7
@sneezinhatch Жыл бұрын
Looks like a mini 2jz
@advangs Жыл бұрын
What's the deal? Why that thing' sitting so tall? Too-tall a tire? Bring it down a little bit. Otherwise tight build, IMO.
@nickbianco2750 Жыл бұрын
Colorado roads suck. Gotta set it high enough to get around without destroying itself.
@advangs Жыл бұрын
@@nickbianco2750 got it, makes sense.
@AMGTT2 ай бұрын
Better than LS1 but still blasphemous needs a 3 rotor
@mingscustoms Жыл бұрын
Won't ever sound like a rotary or have the power band
@rickylazare8773 Жыл бұрын
He needs to learn to heel & toe!
@tylersealey80928 ай бұрын
Um
@darrylbrooks851 Жыл бұрын
Very Interesting👍🏼👍🏼👍🏼
@billballin6948 Жыл бұрын
Make rotary’s great again❤️
@pandroidigital Жыл бұрын
Rotaries 🙄
@billballin6948 Жыл бұрын
@@pandroidigital Rotaries❤️
@thegodzilla6481 Жыл бұрын
Rotaries r suck smh
@billballin6948 Жыл бұрын
@@thegodzilla6481 yo mama suck
@williamrouse3033 Жыл бұрын
The only other engine swap I would do on an Rx7 is an audi 5 cylinder. Give it a little more bottom end.
@LonnieHutchinson90 Жыл бұрын
Sick!
@redsunsmr284 Жыл бұрын
Shoot the car while he's talking dude...
@1carlsworth Жыл бұрын
There's no way it's 450 WHEEL hp at 9 psi
@TheRyansLion Жыл бұрын
Vtec makes boost super efficient.
@1carlsworth Жыл бұрын
@@TheRyansLion 🤣
@TheRyansLion Жыл бұрын
@@1carlsworth I don’t know why that’s funny. 8psi is enough on K motors because the vtec head flows extremely well.
@1carlsworth Жыл бұрын
A gt35 would make 450 but at 15 psi But probably not whp Maybe at the crank. If it didn't crack the liners. A quick search on a boosted k24 forum gives you all the info needed. So no...not at 9 psi - cheers
@TheRyansLion Жыл бұрын
@@1carlsworth I saw someone do it on a dyno I thought, it was in a forum years back so maybe it’s my false memory
@TheSwedishCarGuy Жыл бұрын
Soo damn cool :D
@brothaman1312 Жыл бұрын
driver needs to work on his downshifting...
@jeancharlesrabaux5658 Жыл бұрын
Enfin il est etait temps le rx7 et un exellend chassis sauf que le moteur rotatif qui et très rapide casse trop facilement donc un vtec k24 était la suite logique pour cette voitures qui n est qu un merveilleux chassis le rotatif qui a etait inventer par les allemands qui l on donner aux japonais leur homologue qui on réessayé dans faire un qui chauffe trop bois autant d huîle que d essence et casse souvent mais n est bon neuf pour 400 m et faut le changer les allemands ne savent pas construire des moteur pour préuve bmw le 3 cylindres turbo c est un moteur Peugeot en faites le cox c est un 2cv changer le 2cv et née en 39 avec la guerre en non fait le cox les 6 cylindres BMW sont surment des moteur de traction c15 voler à la seconde guerre mondial si personne parle sa va continuer il copie les français en faite mais a l epoque de Napoléon c était des bouseux dans leur campagne qui on voulue devenir pareille que c est chevalier a fusillé sinon c etait des gens qui travailler la terre avec un roi bidon qui coucher a droite ou gauche seule le rois avait la belle vies dans sont châteaux et tout les paysans autour attendait du roi des choses mais lui avait le feux au pantalon seul ca femme avait la tête sur les épaules comme dab les femmes sont plus fortes mentalement 🙏😑🤲🇫🇷👉🤚
@rachmatdwiputramat2683 Жыл бұрын
👍👍👍👍👍
@miguemazda8627 Жыл бұрын
No no no no😲😲😲😲😲😠😠😠😠
@tompariseau4298 Жыл бұрын
May as well put electroc motor in ,
@mm6705 Жыл бұрын
SMH like the rotary engine is sooooooooooooo drool worthy...they sound and feel amazing, all you need is a quality tuner, and quality apex seals...they are so easy to the drive train... unnng the bridgeported rotaries...like how could you be dreaming about the rx7 without the brap brap idle, and crazy sonorous, yet agressive, high revving rotary sound? Not my dream, glad the dude is happy...I just smh...like what were you dreaming about my man? OMG IT GETS WORSE...they put the electric power steering in from a PRIUSSSS like wtf...this guy didnt even care how it drove either...its wild to see what people dream about and how disjointed it is in reality.
@kennethdiaz666 Жыл бұрын
No
@AhRamboRo Жыл бұрын
Hate Honda put k engine in it
@sk8ersr20 Жыл бұрын
the sound does not match the car, the sound of a rotary or v8 would be dope too
@korzer Жыл бұрын
Sounds terrible
@peytenandmadi2831 Жыл бұрын
Sorry love the car but I can not listen to dude go umm any more . Umm
@todoeldiacruzao Жыл бұрын
🤮
@droopy-R Жыл бұрын
blasphem swap
@WineHouse33 Жыл бұрын
K swapping cars like the RX-7 is beyond cringe. I know the KZbin algorithm likes ridiculousness for attention, but this is 🤢
@yashinbuilds Жыл бұрын
You clearly have no engine knowledge to even try knocking the k. There is a reason it's one of the most used engines for swaps in all sorts of cars, rx7 being one of them as its way more reliable than any rotary. Did i mention how the k loves boost? unopened blocks pushing 500+ hp. Its literally one of the best 4cyl engines you can build today.
@mrboss1766 Жыл бұрын
No car companies sell rotors other than Mazda and yet you still get people swapping them out to “be different“ and it’s an rx7….😂🙄
@lsreborn Жыл бұрын
What's wrong with the K swap? Don't underestimate the power/weight/balance and low maintenance of these K motors
@Unicornpirate Жыл бұрын
I'd much rather have a k-swap over a LS swap.
@jimmyboy92891 Жыл бұрын
I agree this is so cringe. Keep that in a hatchback or Hondas. Rotaries sound way better and power that can be made from these motors are unimaginable from the size. Properly maintained they are reliable