Wow! Really impressed! I did this to my adly silver fox 50 ccand now it is going 80 km/h. I also did this last night to my Kymco Bet&Win(ego) 50 cc and today I will give it a test run =)
@MBPATENTS3 жыл бұрын
Hi Bucoooo I'm glad you made it yourself, a big bravo !!! This patent does not apply to all scooters
@mihaink7 ай бұрын
Nice work cong. What is the dimension of the belt and front variotor diameter? (thx)
@MBPATENTS7 ай бұрын
Hi mihaink I have never sat down to deal with it, but if you enter the strap in the information, you will see what the dimensions are
@adrianofienga97824 жыл бұрын
Great job man, very nice indeed!
@MBPATENTS4 жыл бұрын
Thank you adriano!!!!
@bp-tuningaeroxlc-dd6474 Жыл бұрын
Yes …. Jubuuuuuuu jubiiiiiiiii … he he you clean the Variator House , i like it
@MBPATENTS Жыл бұрын
Thank you!
@cumaalibalc12473 жыл бұрын
0.5 mm is taken from all of the front variator and speed is increased. It is taken from the middle of the pulley 0.5 mm. It will not be taken from its surface. The drive set will be installed 1 gram lighter.
@alisandikci89537 ай бұрын
Başkan bende freccia var 150 CC.orta göbekten düz yüzeyden 0.5 mm alsam hem sogutucudan hem bağa dizilen kasnagin orta gobegiinden.ise yarar mı.birde bağa yuvalarini biraz genisletsem motora bir zararı olur mu.😊
@aloshiq80044 жыл бұрын
well done , i do it with honda forza 08 and it was 122km and after be 147km but is it safe to engine ?
@MBPATENTS4 жыл бұрын
It's better for the engine and it has much lower fuel consumption
@ravedisc11 ай бұрын
Great video, what about Piaggio X7 250 with Quasar engine, stock variator, will it have similar effect or is it only for "smaller" engines?
@MBPATENTS11 ай бұрын
Hi ravedisc I think so because most of the motorbikes from Varadero start I don't know In some others it also starts from the centrifugal rear you have to tamper with the centrifugal that opens and closes to get the top speed to increase the step Thank you very much for your kind words!!!
@ravedisc11 ай бұрын
@@MBPATENTS my scooter Piaggio x7 is stock, I will install Dr pulley sliders (10gr, vs 11gr stock) and just better braking pads. Soon, I will do the variator mod and will write you how much speed I gained and how it affected the fuel consumption. Now my top speed is 132 on the speedometer (GPS I think 122-123), I will see with Dr pulley 10 gr what the speed is, I will also modify the sliders to 11gr, 12gr, 13, 14gr and see what the difference is. And I will do the modification on the variator as you did. I just need a little bit more top speed in order to have less rpm at 80-110 km/h. Acceleration is not so important to me, but I see you gained a lot for acceleration with your mods (faster than 250cc with your 150cc) Thank you.
@MBPATENTS11 ай бұрын
@@ravedisc as for the drum brakes, I will make an important video this month. as for the variator, if you know how to bring the stops and grind the middle part of the variator, you will comfortably go 138 km+, you can put a hard spring, but the damage will be enough
@sfak53 жыл бұрын
Great presentation!! Nikos, Greece.
@MBPATENTS3 жыл бұрын
+Sfak3 ελληνικά please😂😂😂
@sfak53 жыл бұрын
@@MBPATENTS haha
@MBPATENTS3 жыл бұрын
+Sfak3 καλησπέρα Νίκο σε ευχαριστώ φίλε μου!!!
@sfak53 жыл бұрын
@@MBPATENTS Επίσης!
@user-cf3ju5ir3p Жыл бұрын
Wow thats is a big improvement. Can i do this on my Aprilia sportcity 125cc? My top speed is around 100km/h and my acceleration is bad. I checked the roller weights and they weigh 7g. Is this too low?
@MBPATENTS Жыл бұрын
do it, low is not 7c depending on how hard the spring is?
@user-cf3ju5ir3p Жыл бұрын
@@MBPATENTS i’m sorry what spring do you mean? The three little springs ons the clutch?
@saibinmonib22724 жыл бұрын
Ur amazing! Big salute
@MBPATENTS4 жыл бұрын
Thank you very much!!! And thanks for the subscription! 🙏🙏🙏🙏
@saibinmonib22724 жыл бұрын
Its me again love ur watching....... i hope i can do that
@MBPATENTS4 жыл бұрын
Thank you again! I will be honored! If you do that send me your work!
@saibinmonib22724 жыл бұрын
But i cant im super newbie. I didnt how to start first..
@lucifer33destroyerIXXI3 жыл бұрын
Job done well done.⚒👍⚒👍
@MBPATENTS3 жыл бұрын
Thank you!!!
@okankurt52783 жыл бұрын
good work how long did you use any problem occur master
@MBPATENTS3 жыл бұрын
I use it for over a year and a half, I have lost 130000klm, I have no problem, the step is getting bigger and the pcx becomes more economical !!
@okankurt52783 жыл бұрын
@@MBPATENTS Thanks for your reply, but I did the same. The fingernails in the nest of the buckles have become a little oval.
@MultiWildhawk3 жыл бұрын
really 76800km ? Stock engine ?
@rouni12342 жыл бұрын
Καλησπέρα φίλε μου πόσα γραμμάρια ραουλα χρησιμοποιείται..το ένα ράουλο πες πόσα γραμμάρια είναι
@MBPATENTS2 жыл бұрын
16g τα μαμα χρησιμοποιώ γτ?
@georgem24563 жыл бұрын
Φίλε μου, γιατί ανέβηκες τόσο πολύ σε γραμμάρια στις μπίλιες ; Λογικά ανέβηκε η τελική,αλλα δεν εχασες σε επιτάχυνση ;
@MBPATENTS3 жыл бұрын
Γιώργο επιτάχυνση χάνω λίγο το καλό ειναι ότι δουλεύει με πιο λίγες στροφές κ πιο οικονομικό ο ιμάντας δεν τραβάει τοσα ζόρια κ αλα +συν και -μείον οπός ανηφόρες με δικαβαλο πεθάνει μόνος μου είμαι ευχαριστημένος.
@MBPATENTS3 жыл бұрын
Ι τελική δεν έχει να κάνει με τα γραμμάρια έχει να κάνει με το βαριατορ γραναζια μετάδοσης κ δύναμη του κινητήρα.
@georgem24563 жыл бұрын
@@MBPATENTS Το ξέρω οτι όσο ανεβαίνεις γραμμάρια, τόσο πέφτουν οι στροφές. Η τελική ανέβηκε γιατί ανεβηκε και ο ιμάντας πιο ψηλά. Σε ρωτάω επειδή κι εγώ πείραξα τα αυλακια στο βαριατορ για να ανεβαίνουν πιο ψηλα οι μπίλιες και δε ξέρω αν πρέπει να μείνω στα ιδια γραμμάρια ή να ανεβώ λιγάκι (ακομα δεν το έχω τεσταρει)
@MBPATENTS3 жыл бұрын
Ι τελική ανέβηκε απο 102 έφτασε 134 με τις ιδιες μπιλιες. Ααα εσύ έχεις αφαίρεση τα στοπ απο το βαριαντορ. Πιο pcx έχεις?
@georgem24563 жыл бұрын
@@MBPATENTS Δεν έχω PCX. Έχω Kymco X-Town και επειδή έχει τελική τα 130 χλμ/ωρα και επειδή στο πιατέλο του βαριατορ φαίνεται απο τις διαγραμμισεις ότι δε φτάνει μέχρι πανω ο ιμάντας, εφαγα εσωτερικά τις ραμπες.
@vasiadance4 жыл бұрын
Great video!!
@anisytv6858 ай бұрын
Good skill❤😊
@MBPATENTS8 ай бұрын
Thanks!!!
@reptiloidx89424 жыл бұрын
HEY JUSS FEW HOURS AGO I ADJUSTED BACK BRAKE AND ITS NEARLY AS GOOD AS FRONT ONE . SO IM HAPPY NOW . PLEASE TELL ME WHY I DONT HAVE ANY BACK LIGHT WHEN I IGNITE THE ENGINE ??? I CHECKED THE WIReS AT THE BACK AND THERE IS NO ELECTRICAL SIGNAL GOING TO IT AT All .....
@MBPATENTS4 жыл бұрын
Did you check the electric rectifier?
@reptiloidx89424 жыл бұрын
@@MBPATENTS rectifier ??? where is that ??? all other lights are working fine ..... though
@reptiloidx89424 жыл бұрын
@@MBPATENTS HELOOO PATENTS PLEASE HELP ......
@MBPATENTS4 жыл бұрын
@@reptiloidx8942 images.app.goo.gl/D5S9T7cAhQ7YM9Jg7 Watch these wires first they get cut off sometimes
@MBPATENTS4 жыл бұрын
images.app.goo.gl/cqD7UMHQN74HUJww9 Or it may be this valvide
@dendys04 Жыл бұрын
I'm going to do the same with my gy6 125cc Chinese scooter, it already runs like 110KMH but I want to try this variator mod just for fun, I have a spare variator so if I mess it up it won't be a big deal
@MBPATENTS Жыл бұрын
Hi Dendys04 there are scooters that need to be tweaked And the centrifugal to get a bigger step for the scooter There are other machines like the PCX that tweaks the variator, you remove the stops to increase the step
@MarkusK.-wx9ge9 ай бұрын
Fazit: Da wird lange rumgebastelt, um die Übersetzung womöglich tatsächlich etwas länger zu bekommen und am Ende läuft das Moped dadurch auf dem Hauptständer schneller. Na, da hat such die Mühe ja gelohnt.
@MBPATENTS9 ай бұрын
Hi MarkusK Wenn Sie leichtere Kugeln einsetzen und die Stopper aus der Bohrung entfernen, werden Sie einen großen Unterschied feststellen.
@vroegahh3 жыл бұрын
Hello sir, thank you so much for this video :)! On the stand it gives 138 km/h, how much will it do on a flat road with and without wind? Will it be able to reach 125-135 km/h? I actually thought that only the yamaha Nmax 155 is worthwhile buying, but with these tweaks it looks like Honda PCX 150 is also an option now :-)!
@MBPATENTS3 жыл бұрын
+Thomas de GrootFor thoma thank you for your kind words !!! I love the pcx the only bad thing it has are the brakes as for the Nmax very good scooter but not like the pcx it is not, if you disturb the variator and the centrifugal a good exhaust flow flow head and a camshaft goes with 155 - 160km / h comfortably has a lot of room for improvement !!! Up to 135 I go but after 130 they find it difficult to do things. As for the Nmax it can have a good start up to 60km after you bring me that they press the "brake" :) I also wear 23 grams of bliss. PCX only !!!!!
@vroegahh3 жыл бұрын
Thank you :) !! So the PCX is able to reach 130 km/h on the road? Are you able to imporve the brakes as well? Also, do you have experience on tuning the variator of the SH150 or the Honda PS150 in the same way? :D These scooters also look very good to me... Thanks again for your fine work and help!
@MBPATENTS3 жыл бұрын
@@vroegahh yes and SH the same variator has been made !! as for the brakes you mean the rear or the front;
@vroegahh3 жыл бұрын
@@MBPATENTS both rear and front :)
@mixalismixailidis58703 жыл бұрын
Καλησπέρα φίλε στο 1:09 πως το τροχίζεις; Γυρνάει το βαριατορ και εσυ έχεις βάλει τον δικό και αν ναι πως γυρνάει
@MBPATENTS3 жыл бұрын
Καλησπέρα mixalis pontos το βάζεις μπρος και τιν ώρα που δουλεύει ο κινητήρας ρελαντί εσύ κρατας το γυαλόχαρτο πρέπει να κατέβει 3 με 4/10 κάνε κ μια μικρή καμπύλη να μιν σου να μην σου φάει τον ιμαντα προσοχή τον άξονα με το γυαλόχαρτο τωρα μιλάμε για 7 μέχρι 9 χλμ
@mixalismixailidis58703 жыл бұрын
Καλησπέρα φίλε ευχαριστώ που απάντησες και όταν το σκαλίζεις μέσα το βαριατορ το σκαλίζεις συγκεκριμένα χιλιοστά; Πρέπει να το κατηφορίσω για να βγαίνει η μπίλια έξω η όχι απλά να φτάνει μέχρι την άκρη ; Μπορώ να το φάω απ την μέσα πλευρά είναι το ίδιο; Σε ευχαριστώ πολύ φίλε μου
@MBPATENTS3 жыл бұрын
mixali κσαλιζω το στοπ απο εκεί που σταματάει η μπίλια μέχρι επάνω δλδ η καμπύλη να τελειώσει επάνω θα το καταλάβεις καε με τη μπιλια να τα τσεκάρεις εαν κυλάει άνετα. Εαν δεν κατάλαβες στιλε μου το αρ σου
@mixalismixailidis58703 жыл бұрын
@@MBPATENTS αδερφε ευχαριστώ πολύ όπου έχω πρόβλημα σου στέλνω αν είναι dr pulley οι μπίλιες υπάρχει καλύτερη απόδοση η θέλει τις μαμά ;
@MBPATENTS3 жыл бұрын
mixali οχι παίζει ρόλο το βάρος τα μαμα ειναι 16γ 12γ εισαι οτι πρέπει πιο νευρικό θα δουλεύει λίγο στη τσίτα θα καιει λίγο παραπάνω οσο αφορά τ dr puller ειναι τοπ απολες τις εταιρείες το πλαστικο που βάζουν στ μπίλιες ειναι απίστευτο δεν φθείρεται με τπτ!!! Εαν τα μαμα θα σου βγάλουν 10000 κλμ τα dr p θα σου βγάλουν 30000 άνετα!!
@kokooo69693 жыл бұрын
How many grams is your flyballs sir?
@MBPATENTS3 жыл бұрын
16 grams
@MBPATENTS3 жыл бұрын
m.kzbin.info/www/bejne/oZfapH6flraInNk Here 22 gramms 👽☠️
@yoceflkorti38002 жыл бұрын
مرحبا بك هل انت متاكد ان لن ينكسر حاشية البكراة قد تنكسر الألمنيوم لشدة ضعفها
@MBPATENTS2 жыл бұрын
I'm very sure it won't break, I've had it for three years and nothing has happened
@arvinjohnroallos4821 Жыл бұрын
What is your roller weights on this video?
@MBPATENTS Жыл бұрын
16g
@arvinjohnroallos4821 Жыл бұрын
@@MBPATENTS May I know your pcx stock variator weights?
@Geremias_._Ferreira73 ай бұрын
Alguém do Brasil aprendendo essa técnica?
@TamirciAbi4 жыл бұрын
Guzel video kardeşim
@MBPATENTS4 жыл бұрын
Thank you very much bro!!!
@kerryloftus31824 жыл бұрын
What did you paint to clean it off?
@MBPATENTS4 жыл бұрын
gasoline
@reptiloidx89424 жыл бұрын
@@MBPATENTS HEY JUSS FEW HOURS AGO I ADJUSTED BACK BRAKE AND ITS NEARLY AS GOOD AS FRONT ONE . SO IM HAPPY NOW . PLEASE TELL ME WHY I DONT HAVE ANY BACK LIGHT WHEN I IGNITE THE ENGINE ??? I CHECKED THE WIReS AT THE BACK AND THERE IS NO ELECTRICAL SIGNAL GOING TO IT AT All .....
@reptiloidx89424 жыл бұрын
@@MBPATENTS HEY THERE I STILL CANNOT FIND THE VALVID FOR THE BACK TAIL LIGHTS ........ HELP NOW DUDE
@MBPATENTS4 жыл бұрын
@@reptiloidx8942 Hey email me photos of the brake here mbpatents@gmail.com
@mdsaroar9442 Жыл бұрын
Πού μπορώ να πάω για να λειτουργήσει έτσι το αυτοκίνητό μου PCX;
@MBPATENTS Жыл бұрын
You can do what you see in the videos I upload!
@mdsaroar9442 Жыл бұрын
@@MBPATENTS but I'm not inginiar
@alisala822610 ай бұрын
Hi, how long should it be shaved?
@MBPATENTS10 ай бұрын
Hi alisala 20 to 25 minutes
@gio-garagedambrosio3144 Жыл бұрын
Wowowowo nice result😊
@nyannyan3663 жыл бұрын
Is it work on 125i click too?
@MBPATENTS3 жыл бұрын
Yes it works!
@nyannyan3663 жыл бұрын
@@MBPATENTS thz u.
@rigomontana10282 жыл бұрын
Can someone explain what he did
@MBPATENTS2 жыл бұрын
Hi Rigo I remove the stops from the variantor
@MotoVlogists Жыл бұрын
@@MBPATENTS , can we just buy variators with this mod installed? Like, Racing type variator which includes this or similar type of variator modification?
@gio-garagedambrosio3144 Жыл бұрын
Yes. Polini motori or Malossi multivar
@TheFighterbike8 ай бұрын
Grinding it off manually? There's no way in hell that's balanced. This seems like a good way to fuck up a reliable engine..
@MBPATENTS8 ай бұрын
Hi FighterbikeThere are many ways for me it was the fastest but I could show others very clever idea thank you very much!!! Then I was interested in the result.
@theanhnguyen79 Жыл бұрын
Everything will have 2 sides, this will cause harm to the belt worse than it will break if you do not check it regularly. By pressing the two cheeks to push the belt up, the edge of the belt will be scratched.
@MBPATENTS Жыл бұрын
Well in a while I will upload a video that's about belts and in this video you will see that the belt has more life because of it.
@MBPATENTS11 ай бұрын
your theory is very correct, this happens when it has a harder spring or balls 10 and below, the variator has nothing to do with this ritual
@Maswa_tamir Жыл бұрын
dude i expanded the variator but nothing changed 😂
@MBPATENTS Жыл бұрын
you removed the stops from the variator you asked them both where it goes into the shaft in the hole and it doesn't work properly you have not done something right
@georgem24564 жыл бұрын
Στο 01:09 τί είναι αυτό που χρησιμοποιείς ;
@MBPATENTS4 жыл бұрын
Γυαλόχαρτο να αφαιρέσω τις πατούρες από το βαριατόρ να γίνει ίσιο.
@georgem24564 жыл бұрын
@@MBPATENTS Κι εγώ αυτό καταλαβα στην αρχή, απλά μετά είδα οτι το περνάς και με κάτι άλλο και γίνεται σα καθρέπτης το βαριατορ.
@MBPATENTS4 жыл бұрын
Εκεί το γυαλίζου με βούρτσα αλλά δεν το συνιστώ.
@georgem24564 жыл бұрын
@@MBPATENTS Γιατί ; Μήπως μετά γλυστραει πολύ ο ιμάντας ;
@MBPATENTS4 жыл бұрын
Ναι σωστός για 100 km μόνο και μετά στρώνει είναι σαν να έχεις βάλει μπίλιες πιο ελαφριές.
@johnnewbold32253 ай бұрын
Unloaded speed only
@MBPATENTSАй бұрын
Yes
@viamortis1174 жыл бұрын
Rollers weight?
@MBPATENTS4 жыл бұрын
26 gramms
@viamortis1174 жыл бұрын
@@MBPATENTS 26g? Wow serious? OEM is 16g
@MBPATENTS4 жыл бұрын
@@viamortis117 it is more economic and it doesn't have much power
@viamortis1174 жыл бұрын
@@MBPATENTS you testet meaby vario malossi or polini? You have opinion about that?
@MBPATENTS4 жыл бұрын
Only polini 9 rollers are very good!!
@Konlil13034 жыл бұрын
Είστε Έλληνας???
@MBPATENTS4 жыл бұрын
Είμαι απο την Αλβανία αλλά μένω Αθήνα.
@Konlil13034 жыл бұрын
@@MBPATENTS εγώ δουλεύω σε συνεργείο στην Αθήνα αν σου φέρω ένα βαριατορ μαμα που έχω θα μπορέσεις να το κάνεις η θέλεις και το μηχανάκι εκεί? Θα το έκανα αλλά δεν έχω χρόνο!
@MBPATENTS4 жыл бұрын
Το βαριαντορ σου ειναι απο pcx?
@Konlil13034 жыл бұрын
@@MBPATENTS Ναι 150 led
@MBPATENTS4 жыл бұрын
@@Konlil1303 στείλε μου τον τηλ σου ι στο fb moto patents
@intoytabok77313 ай бұрын
lol running in center stand is different speed when running on the road body weight of the driver and the weight of pcx let see if your top speed is 138 😂